aluminium alloy Tenders in Maharashtra

1
Tata Memorial Centre - Maharashtra

40858415 tender for rectification of external ducts of rrs bldg at actrec; 1 providing and fixing double scaffolding system ( cup lock type ) on the exterior side, up to height of buildingmade with 40 mm dia m.s. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with m.s. tubes, m.s. tube challies, m.s. clamps and m.s. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .the scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of engineer in charge .the elevational area of the scaffolding shall be measured for payment purpose .the payment will be made once irrespective of duration of work & comlpletion of entire work inclding any rectification works needed where required complete as directed and instructed. 2 removing exisitng acp panel work, strucutral glaxing works & cementitious board fixed in stripes fixedon vertical as well on horizontal anodized aluminum tubeswith anchor bolt, fastners , clip, screws etc. complete job. rate should be inclusive of taking out all anodized aluminum tube , profile etc. rate to include taking out ofpowder coated g.i. sheets / aluminum angles for metal profiles at corners, jambs, soffits etc.work to include stacking of good materials, disposal of unserviceableat any lead as well required double legged independent scaffolding for entire height of building complete as directed and insturcted. 3 providing & fixing factory finished fiber reinforced plastic / polymer casted to required length of minimum 200 x 6 mm thick with approved colour pigment added during the manufacturing process in z shape louversshall be made to fullfill the purpose of cross ventilation and sucessfully avoid direct entry of rain water spals even during the high winds. the lovers are to fixed neatly to line and level mainting the gaps uniform through out the building. these louvers are to be fixed on existing aluminum / ms section with ss 304 heavy duty screws only. the corner edges of louvers and juctions are to finished, jointed properly to match the existing surface. the entire work to be executed externally with safety precautions to men and material while shifting and working at all heights. safety nets shall be provided at the location of work. the agency shall make sample with approved colour before supply inb bulk. any colour vatiation during the production, or observed after installtion shall be replaced with new mathcing colour only with out assigning any reason, complete working at all heights, level, including wastage, labour, shiftnig of material meachanically or manually as directed and instructed. 4 steel work in welded ( sail , tata , vizag & using electrodes of ador make only ) in built up tubular sections ( round, square or rectangular hollow tubes etc. ) trusses etc., including cutting, hoisting, fixing in position for all heights and levels and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete with hot finished welded type tubes 5 providing, fabricating, hoisting and erecting in position structral steel worksin welded ( sail , tata , vizag & using electrodes of ador or es4b or deh secheronmake only ) in built up sections comprising of trusses, lattice girders, brackets, columns, bracing and other connected steel work with necessary joists, channels, angles l sections, plates, chequered plates , gusset plates, rivots, chemical anchor fastners , bolts, nuts, washers, including cutting, welding, for all heights and levels in all type of structural steel with applying a priming coat of approved steel primer using structural steel etc. as required. 6 designing, fabricating, testing, installing and fixing in position curtain wall with aluminium composite panel cladding over aluminum framing, with open grooves for linear as well as curvilinear portions of the building, for all heights and all levels etc. including: a ) structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage ofwater to make it watertight including checking of all the structural and functional design. b ) providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick fr grade mineral core sandwiched between two aluminium sheets ( each 0.5mm thick ) . the aluminium composite panel cladding sheet shall be coil coated, with kynar 500 basedpvdf / lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer ( service ) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. c ) the fastening brackets of aluminium alloy 6005 t5 / ms with hot dip galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, ss 316 pins and anchor bolts of approved make in ss 316, nylon separators to prevent bi metallic contacts all complete required to perform as per specification and drawing the item includes cost of base frame work for acp cladding, all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation.the contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the engineer in charge. however, for the purpose of payment, only the actual area on the external face of the curtain wall with aluminum composite panel cladding ( including width of groove ) shall be measured in sqm. up to two decimal places. 7 taking outanodized extruded modular aluminium fixed glass panel windowhaving frame made out extruded tubular section of size 63 x 38 mm x 2.00 mm thickness ( wt.1.054 kg / rmt ) mechanically assembled at corners with glazing, beading of angle 25 x 25 x 1.60mm thick ( wt.0.21 kg / rmt ) of approved make , shade& weightincluding6mm thk single vision toughened glass fixed with rubber gasket and wooden encasementetc.complete. this glass is fixed with taper clips with epdm beading. all gaps between civil work and aluminium framesis sealed and made watertight by applying silicone sealant and with good quality hardware and accessories like gi screws, virgin pvc , gaskets, silicon sealant on the periphery.work to include stacking of good materials, disposal of unserviceableat any lead as well required double legged independent scaffolding for entire height or as required to approval of the pm. 8 design, fabricate, package, deliver ( to job site ) and install curtain wall systems comprising specified glass.the glass panels will be mechanically supported to the aluminium main frame with pressure plate & cover cap on outer surface and fixed onto mullions and transomsincluding functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop ( barrier ) cum smoke seals, microwave cured epdm gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard with all approved standard accessories and hardware’s of approved make.all aluminium extruded profiles shall be confirming to alloy 6063 t6. allaluminium profiles shall be anodized with a minimum thickness of 25 microns and shade shall be as per architects approval. the curtain wall shall be sealed to the host structure and not adjoining materials with approved water proofing membrane and insulation to prevent sound transmission. the system and glass shall be designed to withstand 1.5 times the design wind pressureat all levels, elevation & heights. the anchoring / bracing of the curtain wall system to the rcc slab / beams / columns shall be done with non corrosive galvanized brackets of approved design ( 80 90 micron thickness ) and including providing teflon shims of various thickness to adjust the beam level / line variations fixed with ss dash fasteners hilti , fisher or equivalent of min. 12mm dia. and depth of 50 80mm in the concrete and to withstand the dead load of the curtain walls as well as stresses due to wind pressure etc. expansion joint gap for mullion shall be minimum 15 to 20mm filled with expansion joint sealant from dow corning of dc 790 . all screws, washers used shall be only stainless steel of 304 grade and through bolts , nuts & anchors used shall be only stainless steel of 316 grade.the contractor must design the system as per the prevalent site conditions and building elevation profiles. no extra claims shall be entertained at any stage for aluminium profile wall thickness and size dimensions. material supporting arrangements shown in the drawing are indicative and contractor shall make their own shop drawings and suggest method of fixing with type of anchors they propose to use where they are to be fixed.work to include required double legged independent scaffolding for entire height or as required as per site conditions complete as directed and instructed. with 6mm thk single vision toughened glass with solar heat gain factor should be less than 0.25 of approved make, should match existing strucutral galzing work complete as directed and instructed. 9 20 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 ( 1 cement: 5 coarse sand ) and a top layer 8 mm thick readymade plaster of approved make finished rough with sponge including double scaffolding, surface preparation, line & level, curing etc. providing & laying approved 22 swg g.i.chicken mesh 250mm wide at all joints & on all conduits for electrical & plumbing works etc at all level & height etc. complete 10 extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers. 11 finishing walls with textured exterior paint of required shade on new work ( two or more coats applied @ 3.28 ltr / 10 sqm ) over and including priming coat of exterior primer applied @ 2.20kg / 10 sqm 12 removing & refixing of exsitng 16mm thick multiwall poly carbonate sheets of approved colour including all fixing arrangement at all level & height and refixing the same with all required materials such as screwing with self tapping screws complying with as 3566 class iii with epdm washer and fixed on every crest etc. matching exisitng polycarbonate sheet roofing profile, water tightness by applying silicon sealant in gaps ensuring 100% water tightness, for roofing over canopy , ramp at all level & heightetc. as directed and instucted with erection & dismantling pof scafolding complete as directed and instructed. the rate shall include installtion of flashing panel at wall & roof juction and tested for water tightness at no additional cost. 13 providing & fixing 16mm thick multi wall polycarbonate sheet of min weight of 3250 gms / sq. meter, withextruded uv protected ( co. test report shall be sumbitted ) with special anti glare protection to prevent glare and sun streaks, with vertical standing seam at both sides sun streaks, with vertical standing seam at both sides of panels, weilding or gluing of up stands or standing panels shall have a grip lock double tooth locking machinism to ensure maximum uplift capability. panel ends shall be closed with additional end cap of aluminum u profile ( anodized / poweder coated ) the work shall be fitted on exisitng ms structure perpendicular ti direction of sheet with purline spacing as specified by manufacturer ofas approved and directed by engineer in charge. colour of sheet will be opal weight / green / brown or other colured as approvedthe rate shall included cost of all scaffolding equipemnts, hardware, wastage etc working at all levels and heights....

Due Date : December 14, 2023

Tender Value : ₹ 1.42 Crore

View Tender
2
Central Railway - Maharashtra

40818885 supply of tanker ladder approved as per safety statanker ladder approved as per safety sta,tanker ladder approved as per safety standards model no : 4365060 type 2 section push up ladder overall length extended : 4.7 mtr (15 16ft) overall length retracted : 2.7 mtr (9ft) platform height : 4 mtr (13 14ft) maximum reach up to : 6 mtr (19 20ft) load capacity : 150 kg key specs: %u25cf height adjustable by rope %u25cf double sided handrail for comfort climbing %u25cf wide platform with safety cage for proper safety %u25cf sturdy aluminum alloy rungs with non slip serrated surface [ warranty period: 30 months after the date of delivery ]...

Due Date : December 08, 2023

Tender Value : ₹ Ref. Documents

View Tender
3
Maharashtra State Road Development Corporation - Maharashtra

40817897 bus body / tyre / spring leaves / alluminium and all auto parts etc scrap of old us ber radial tyres size 900 x 20 as it is, scrap of old us ber radial tyres size 1000 x 20 as it is, scrap of old us ber radial tyres size 1000 x 20 as it is, scrap of old us ber radial buffed tyres size 900 x 2qty. 139 and radial buffed tyres size 1000x 20 qty 25 as it is, scrap of old us ber tyre of domestic vehicle 600x1618585r1621575r15, 16580r15, 17565r 14etcas it is, scrap of old us ber rubber tube with or without valve size 1000x20900 x 20, as it is, scrapof old us ber rubber flaps of tyre size 900x20only rounded as it is, scrapof old u s ber pieces of tube, flaps and tyre rubber parts as it is lot at 2 placesother material will be withdrawn at the time ofdelivery, scrap of old empty engine oil barrels 210 ltrs.capacity with or w / o lid as it is, scrap of old us empty paint thinner drums 20 ltrs capacity ( m.s ) a grad , as it is, scrap of old us ber plastic cans of 2025 ltrs capacity as it is , where it is., scrap of old us d. e. f drums 20 ltrs capacity , as it is, scrap of old empty pvc barrel 210 ltras it is., ferrous scrap of old us ber ms consisting bus body item such as angles, flat pieces, wire mesh, broken seat frame silencer pipes pipes panels ms tin, tampered diesel tanks brackets ms window frames luggage as per pdf catlouge list, scrap of old u / s ber seat back cushion with aluminium rest as it is where it is lot at 2 places note 2 or 3 seater back rest will be counted 2 and 3 nos respectively., scrap of old us ber seat back cushion with plywood as it is where it is lot at 2 places, scrap of old us ber misc. rubber items such as bulb horn, rubber hoses, rubber pieces, fan belt, rubber glazing, balata packing, rubber bidding, engine mounting pads, gaskets, round flapsas per pdf catalogue, scrap of old us ber c b rubber as it is where it is, non ferrous scrap of old us ber alluminium as per pdf calalouge as it is, ferrous scrap of old u / s ber m s steel spring leavesassorted size front and rear main leaf eyes lot at 2 places as it is, ferrous scrap of old us ber misc. auto.spares as per catalouge it is, scrap of old us ber brake chamber front rear assorted as it is., ferrous scrap of old us ber special auto spares such as gears in various size of gear parts, main shafts with or wo side cover as per pdf catalogue, non ferrous scrap of old us ber gear box top cover with or without gear danda as it is where it is, non ferrous scrap of old us ber alu piston assly as it is where it is, non ferrous scrap of old us ber alluminium alloys consisting of piston, filter bodies tappet cover fixing bracket as per pdf catlogue, ferrous scrap of old us ber assy fly wheel with or without ring assorted as it is, ferrous nonferrous scrap of old us scrap ber fly wheel rings only as it is, ferrousscrap of old us ber brake drum frontrear assorted size as it is, non ferrous scrap of old us ber wheel disk big 84 small24tc and bsiii along with or without ring as it is., ferrous scrap of old unserviceabl ber crown wheel assy, with without casing andcarrier a it is where it is, ferrous scrap of old unserviceable ber all types of bearing assorted sizes m, sas it is, ferrous scrap of old unserviceable ber clutch release bearing assorted sizes m s as it is, ferrous scrap of old us ber gear box casing assorted as it is, scrap of old us ber clutch housing 10, clutch housing 7 bell housing ms 18assorted as it is, non ferrous scrap of old us ber aluminium radiator assyassorted size as it is, non ferrous scrap of old us ber radiator uppertank fiber with orw cap assorted as it is, ferrous scrap of old us ber clutch plates with or wo hub and clutch lining assortedas it is, ferrous scrap of old pressure plate assembly as it is where it is, ferrous scrap of old pressureplates cover as it is where it is, ferrous scrap of old pressure plates disk tava as it is where it is, ferrous scrap of old unserviceable ber m s diesel tanks in assorted sizes as it is, scrap of old us ber vane pump with or without pully as it is, ferrous scrap of old us ber propeller shaft yoke as it is, ferrousnon ferrous scrap of old us ber starter armatures with or wocommunator assorted as it is, ferrous scrap of old us ber brake shoes rear and front with or wo linings, and ms link assorted as it is, ferrous scrap of old us ber malleable auto items as per catalouge as it is, non ferrous scrap of old us ber broken aluminium rivets as it is and where it is, non ferrous scrap of old us ber lead acid p p hard batteries 12 v x 19 plates, as it is lot is reserved for licence holder issued by mpcb cpcb, non ferrous scrap of old us ber lead acid inverter battery , lot is reserved for licence holder issued by mpcb cpcb, scrap of old us ber auto gen electrical material as per pdf catalogue, scrap of old us ber special auto electrical material as per catalouge as it is, scrap of old u / s ber plywood pieces, teakwood door frame, door window, window frame with or without ms grill as per catalouge as it is, scrap of workshop sweep consist of old pieces of rexine wooden pieces, rubber pieces card board boxes broken glasses, glass dust etc, on it is, scrap of workshop sweep consist of old pieces of rexine, wooden pieces, rubber pieces, card board boxes, broken glasses, glass dust etc, as per pdf catalogue as it is, scrap of old us ber used burnt engine oil with barrel 210 ltrs as per pdf catalogue, ferrous non ferrous scrap of old us ber following pme items acceceries spares 1bench voice small big size 6 nos 2 lazy tong 2 nos 3 hand drill machines 4 nos as it is where it is, scrap of old us ber fire extinguisher 4kg capacity of vehicles assorted size as it is, scrap of old us ber fire extinguisher 6 kgs capacity of vehicles assorted size as it is, ferrousnon ferrous scrap of old us ber i.e. ring spanner 9 to 32 78 nos, patti panapatti spanner 12 to 32 124 nos all type of socket 9 to 32 60 nos, wheel nut spanner 27 32 nos, wheel nut spanner 32 38 nos et as it is, scrap of old us ber all types of filters as it is where it is, ferrous scrap of old unserviciable ber damaged broken vehicle jack hydraulic mechanical m s as it is, ferrous scrap of old us ber metal dust turing waste with 2 barrels, ferrous non ferrous scrap of old us bus body skeletan as per pdf catalogue, ferrousnon ferrous scrap of old us ber shock absorber assorted, as it is, scrap of old us ber slack adjuster assorted as it is, scrap of old us ber air dryer filter body assorted as it is, ferrousnon ferrous scrap of old us ber water pump tc 30 nostcic 8 nos as it is, scrap of old us ber rear axel shaft assortedas it is, scrap of old us ber turbo charger asslmbly, scrap of old us ber turbo charger small size assembly as it is where it is, scrap of old us ber scrap hub assembly as it is where it is, scrap of old us ber turbo charger core only, assorted as it is, scrap of old us ber fan belt tensioner as it is, scrap of old us ber scrap gear danda as it is where it is, scrap of old us ber avery make weighing machine as it is where it is, scrap of old us ber field coil as it is where it is, ferrous nonferrous scrap of old us ber all types of cables of civil appliences as it is where it is, ferrousnon ferrous scrap of old us ber rexine foam pieces as it is where it is, ferrousnon ferrous scrap of old us ber damaged broken ceiling fan with without blade as it is where it is, ferrousnon ferrous scrap of old us ber water motor machines of various capacities as it is where it is., scrap of old u / s scrap cement sheets broken cement sheets at multiple location ( as it is ) , ferrous non ferrous scrap of old us ber civil electrical material including fuse boxes 50 nosstreet lamps light covers, water gizzer 3 nos, ferrous / non ferrous scrap of old u / s ber damaged / broken g.i.sheet as it is where it is, scrap of old us scrap ber airtel coin box complete or incomplete with or without top cover as it is, where it is....

Due Date : December 08, 2023

Tender Value : ₹ Ref. Documents

View Tender
4
Rural Development Department - Maharashtra

40803319 providing and supplying electrical mterial at grampanchayat wadhu bk providing and supplying electrical mterial at grampanchayat wadhu bk tal shirur pune , material list , supplying and erecting modulartype switch6a / 10a isimark approved make duly erected on provided plate and box with wiring connections complete. ( 8 1 2 ) , supplying anderecting streetlightbracket for erection ofsingle fitting made from 40 mm. dia ‘b’ class g.i. pipe 1.0 m in length along with pole cap of 300 mm length 100 mm dia duly welded as per specification no. , providing cementconcrete foundationincluding excavationfor the poles 60 cm x 60 cm x 1.5 m deep in 1:3:6 cement concrete ( 20 x 25 mm stone metal ) and 45 cm x 45 cm x 45 cm / 45 cm dia. x 45 cm height plinth duly plastered andwithnecessarycuringandfinishinginanapproved manner. ( for 8.5 to 9 m poles ) ( 16 3 2 ) , supplyinganderectingsteeltubularswagedpole139.7x 114.3 x 88.9 mm. dia with 4.5x3.65x3.25 mm thickness ( 4.5 + 1.75 + 1.75m ) length respectively and total 8 m long with pole cap, base plate in provided foundation. ( weight 101 kg. ) as per specification no. oh pl / stp , supplyinganderectingsteeltubularswagedpole165.1x 139.7 x 114.3 mm. dia with 4.5 x 4.5 x 3.65 mm thickness ( 5 + 2 + 2m ) length respectively and total 9 m long with pole cap, baseplateinprovidedfoundation ( weight147kg ) as per specification no. oh pl / stp , supplyinganderectingsteeltubularswagedpole165.1x 139.7x114.3mmdia.with4.5x4.5x3.65mmthickness ( 5.60+2.7+2.7m ) lengthtotal11mlongwithpolecap, baseplateinprovidedfoundation ( weight175kg. ) asper specification no. . oh pl / stp , supplying and erecting street light bracket made from 25mm.dia‘b’classg.i.pipe, 0.6m.inlengthalongwith polecap of 300 mm length and 80 mm dia duly welded with provided leads as per specification , supplying, tpmcb 40a to 63a in provided distribution board , providingpairofdulytestedrubberhandglovesasper is:4770 suitable for working upto 22kv supply. , supplying and erecting insulated d.p. switch surface type / flush type 32a 240vwith indicator lamp & fuse , supplying h.c. pattern porcelain fuse bridge swith base & hc type fuse links240v 32a , supplying and erecting programmable digital almanactimer microcontroller based with real time clock to operate on derived switching “on” & switching “off” street light as per daily sunset and sunrise respectively , 1.25 mm crca sheet metal enclosures with 20a. , supplyingpvcinsulatedpvcroundsheathed1.5sq.mm ( 30 no. x 0.25 mm dia. ) 3 core flexible multi stranded copper industrial cable for voltage grade up to 1.1 kv ( 1 3 29 ) , supplyinganderectingledstreetlightfittingsuitablefor 60wlamp, includinglamp, with pf > 0.95 class ip 65 and abovehousingofpressurediecastalluminiumalloyand heat sink 2 9 5 , supplyinganderectingledstreetlightfittingsuitablefor 26wto36wledstreetlight, includinglamp, withpf> 0.95classip65andabovehousingofpressurediecast alluminium alloy and heat sink 2 9 5 , supplying and erectingled street light fitting suitable for 90 w led street light, including lamp, with pf > 0.95 class ip 65 and above housing of pressure die cast alluminium alloy and heat sink 2 9 5 , supplyinganderectingledfloodlightfittingof120w, includinglamp, withpf>0.95, classip65andabove housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification no fg odf / fls 2 , supplying & layingpvc armoured cable 4core 6sq mm , supplying & layingpvc armoured cable 4core 10 sq mm 7 1 15 , supplying & layingpvc armoured cable 2core 10 sq mm , supplying & layingpvc armoured cable 4core 16 sq mm , supplying, erecting & marking spmcb 6a to 32a, b series ( for lighting ) 5 3 3 , supplying, erecting & marking dpmcb 6 a to 32 a bseries ( for lighting ) 5 3 7 , supplying, erecting&markingtpmcb6ato32ampin provided distribution board 5 3 14 , supplying, erecting & marking fpmcb 40a to 63a in provided distribution board 5 3 17 , supplying & erecting crimping type aluminium lugs for cable upto 16 sq mm complete 7 10 1 , supplying&erectingcrimpingtypecoperlugsforcable upto 1.5 to 6sq mm complete… , supplying and erecting two pole power contactor 250v 32a for time switch complete erected on wooden block / provided box, with necessary materials. 4 4 3 , supplying&erectingmainswith2x1.5sq.mmf.r copperpvc insulated wire laid in provided conduit / trunking / inside pole 1 3 3 , supplyinganderectingmainswithisimarkwp2x6sq. mm. 1100 v. grade aluminium pvc insulated pvc sheathed wires on g.i. bearer wire no. 8 swg 1 4 3 , supplyinganderectingmainswithisi markwp2 x2.5 sq mm. 1100 v. grade aluminium pvc insulated pvc sheathed wires on g.i. bearer wire , supplying and erecting mains with isi mark wp2 x 10.00 sq mm. 1100 v. grade aluminium pvc insulated pvc sheathed wires on g.i. bearer wire , 25 amp, 32 amp three phase l / t contactor , 2.5 sq. mm multistand copper wire , insulation tape , water proof tape , cable joint kit upto 16 sq. mm cable , street light pole box frp , cement street light pole clamp , m.s. street light pole clamp , servicing and primary maintenance of street light pole 1 vis , supplying and laying ( including excavation of suitable width & , servicing and primary maintenance for street light pole. , light poles painting in silver colour , 26w led light to 100w led light repairing , old pole shifting, rework and foundation work per pole etc. , supply &fixing of shakle hardware with nut bolt , supply and installation of mini feeder pillar with stand , rcc road cheasling charges with tractor breaker ( 1 hours , tree triming for overhead line , supplyinganderectingsolarpanelcomprising , supplying and erecting approved makebattery with capacity , servicingandprimarymaintenanceofsolarlightpole1 , solar light fixture with light 9w / 12w aluminim dia casting with charge controller & lithinium battery with auto on / off system.. , providing rental basis hydraulic bucket vehicle of highth 13 , 7 1 33 supplying, erecting & terminating xlpe armoured cable 4 core 70 sq. mm. aluminium conductor with , 7 1 31 supplying, erecting & terminating xlpe armoured cable 4 core 35 sq. mm , 7 1 34supplying, erecting & terminating xlpe armoured cable 4 core 95 sq. mm , 7 1 35 supplying, erecting & terminating xlpe armoured , 5 3 4 supplying, erecting & marking spmcb 40a to 63a c series ( for motor / power ) in provided distribution board as per specification no. sw swr / mcb , 5 3 5 supplying, erecting & marking spmcb 40a to 63a, b series ( for lighting ) in provided distribution board as per specification no. swswr / mcb , 5 3 8 supplying, erecting & marking dpmcb 40a to 63a, c series ( for motor / power ) in provided distribution board as per specification no. sw swr / mcb , 5 3 9 supplying, erecting & marking dpmcb 40a to 63a, b series ( for lighting ) in provided distribution board as per specification no. swswr / mcb , 5 3 15 supplying, erecting & marking tpmcb 40a to 63a in provided distribution board as per specification no. sw swr / mcb , 5 3 17 supplying, erecting & marking fpmcb 40a to 63a in provided distribution board as per specification no. sw swr / mcb , 5 3 27 supplying, fixing and commissioning mcb type change over switch 2 pole, 25 a with 3 positions ( i o ii ) with centre off position as per specification no. sw swr / mcbcos , 5 3 28 supplying, fixing and commissioning mcb type change over switch 2 pole, 40 a with 3 positions ( i o ii ) with centre off position as per specification no. sw swr / mcbcos , 5 3 29supplying, fixing and commissioning mcb type change over switch 2 pole, 63 a with 3 positions ( i o ii ) with centre off position as per specification no. sw swr / mcbcos , 5 3 32 supplying, fixing and commissioning mcb type change over switch 4 pole, 63a with 3 positions ( i o ii ) with centre off position as per specification no. sw swr / mcbcos , 7 9 4 supplying & erecting crimping type copper lugs for cable 50 sq. mm. complete as per specification no. cb cl / cu , 7 9 5 supplying & erecting crimping type copper lugs for cable 70 sq. mm. complete as per specification no. cb cl / cu , 7 9 7 supplying & erecting crimping type copper lugs for cable 120 sq.mm. complete as per specification no. cb cl / cu , 4 4 5 supplying and erecting four pole power contactor 430 v, 40 a for time switch complete erected on provided wooden block / box, with necessary materials. , supplying and erecting icdp switch 10a to 63a , cable joint kit for armoured cable 20 upto 120sq. mm cable , gi tar , ahuja speaker system ( pa ) 110w to 250w with mic , kit kat type fuse 16a 32a 63a 120a , taparia tester , spaner set , control panel hrc fuse , supplying and erecting transformer fidder piller , 5 2 19 supplying & erecting street light control panel in , 2 5 5 supplying and erecting led street light fitting suitable , service charges for maintainance of aboe material per day...

Due Date : November 30, 2023

Tender Value : ₹ Ref. Documents

View Tender
5
Department Of Atomic Energy - Maharashtra

40786469 bids are invited for wrought aluminium and aluminium alloys sheet and strip (general engineering purposes) as per is 737 (q3) mse total quantity : 10...

Due Date : December 05, 2023

Tender Value : ₹ Ref. Documents

View Tender
6
Shipping Corporation Of India Limited - Maharashtra

40756256 tender for procurement of spares; system: whistle ibuki mh700h, a200esh b [ whib0004 ] particulars : maker : ibuki / serial no : subsystem: spare parts list for piston horn, mh700 h, dwg. pj 5540b [ sup0001 ] parts list for piston horn, mh700 h, with heater ( 200w ) , dwg. pj 5540b maker : n / a 1. 003 / pj 5540b pc / eachpiston ring, iron casting, fc 1 10 2. 004 / pj 5540b pc / eachpiston, aluminium alloy casting, ac5a f 1 10 3. 007 / pj 5540b pc / eachconnecting rod, carbon steel forging, sf 1 10 4. 008 / pj 5540b pc / eachoil scraping ring, iron casting, fc 1 10 5. 011 / pj 5540b pc / eachmounting block, rolled steel, ss400 1 10 6. 012 / pj 5540b pc / eachcrank shaft bearing, iron casting, fc 1 10 7. 013 / pj 5540b pc / eachball bearing, chromium bearing steel, suj2, ntn6206 1 10 8. 014 / pj 5540b pc / eachbearing metal, f 66 1 10 9. 015 / pj 5540b pc / eachcrank shaft, carbon steel, s45c 1 10 10. 016 / pj 5540b pc / eachball bearing, chromium bearing steel, suj2, ntn6207 1 10 11. 017 / pj 5540b pc / eachpacking ( o ring ) , synthetic rubber, g210 1 10 12. 019 / pj 5540b pc / eachoil seal, synthetic rubber, sb345411 1 10 13. 024 / pj 5540b pc / eachball bearing, chromium bearing steel, suj2, ntn6206 1 10 14. 026 / pj 5540b pc / eachoil pump, carbon steel, s35c 1 10 15. 035 / pj 5540b pc / eachoil seal, synthetic rubber, sb243810 1 1...

Due Date : December 13, 2023

Tender Value : ₹ Ref. Documents

View Tender
14
Central Railway - Maharashtra

40673336 supply of supply of safety step ladder made of heasupply of safety step ladder made of heavy duty aluminium alloy as per annexure and drawing attached.supply of safety step ladder made of heasupply of safety step ladder made of heavy duty aluminium alloy as per annexure and drawing attached.,supply of safety step ladder made of heavy duty aluminium alloy as per annexure and drawing attached. [ warranty period: 30 months after the date of delivery ]...

Due Date : December 04, 2023

Tender Value : ₹ Ref. Documents

View Tender
16
Maharashtra State Road Transport Corporation - Maharashtra

40668735 scrap material and vehicles scrap of old un serviceable ber nylon tyres size 9.00x20 as per catalogue, scrap of old un serviceable ber nylon tyres size 9.00x20 as per catalogue, scrap of old un serviceable ber nylon tyres size 9.00x20 as per catalogue, scrap of old un serviceable ber radialtyres size 9.00x20 as per catalogue, scrap of old un serviceable ber radialtyres size 9.00x20 as per catalogue, scrap of old un serviceable ber radialtyres size 9.00x20 as per catalogue, scrap of old un serviceable ber radialtyres size 9.00x20 as per catalogue, scrap of old un serviceable ber radialtyres size 9.00x20 as per catalogue, scrap of old un serviceable ber radialtyres size 9.00x20 as per catalogue, scrap of old un serviceable ber radialtyres size 9.00x20 as per catalogue, scrap of old un serviceable ber radialtyres size 9.00x20 as per catalogue, scrap of old un serviceable ber radialtyres size 9.00x20 as per catalogue, scrap of old un serviceable ber radialtyres size 10.00x20 as per catalogue, scrap of old unserviceable ber shivshahi radial tubeless tyres size 295x80rx22.5. as per catalogue, scrap of old un serviceable ber buff tyres size 9.00x20 as per catalogue, scrap of old un serviceable ber rubber tubes with or without valve size 9.00x20, 10.00x20 as per catalogue, scrap of old un serviceable ber rubber flaps of tyre as per catalogue, scrap of old un serviceable ber pieces of tyres, tubes flaps assorted size as per catalogue, empty old m.s. barrels of engine oil 210 ltrs capacity as per catalogue, empty old m.s. grease barrels of 182 kg. capacity with or without lid as per catalogue, old un serviceable empty pvc barrels 210 ltrs capacity as per catalogue, ferrous scrap of old un serviceable ber m.s. consisting bus body items as per catalogue, non ferrous scrap of old un serviceable ber aluminium sheets as per catalogue, ferrous scrap of old un serviceable ber m.s. spring leaves, assorted size as per catalogue, ferrous scrap of old u.s ber miscellaneous auto spares as per catalogue, ferrous scrap of old un serviceable ber special auto spares as per catalogue, ferrous non ferrous scrap of un serviceable ber alluminium alloy auto as per catalogue, ferrous scrap of old u.s ber fly wheel assembly with rings m.s as per catalogue, ferrous scrap of old un serviceable bsiii, iv water pump as per catalogue, ferrous scrap of old un serviceable tcic water pump as per catalogue, ferrous scrap of old un serviceable ber front and rear brake drums assorted size of c.i. as per catalogue, ferrous scrap of old un serviceable ber crown wheel assly with or without pinion as per catalogue, ferrous scrap of old unserviceable ber gear box assembly of cast iorn as per catalogue, ferrous scrap of old un seviceable ber bell housing of m.s. as per catalogue, ferrous scrap of old unserviceable ber gear box housing as per catalogue, non ferrous scrap of old un serviceable ber radiator cores of aluminium assorted sizes as per catalogue, ferrous scrap of old un serviceable ber clutch plates with or without hub m.s. as per catalogue, ferrous scrap of old un serviceable ber pressure plates complete top bottom of c.i. 3, 4 finger type, assorted sizes as per catalogue, ferrous scrap of old un serviceable ber back plate of pressure plates assorted sizes as per catalogue, ferrous scrap of old un serviceable ber pressure plates top only of c.i. assorted sizes as per catalogue, ferrous scrap of old un serviceable ber malleable auto items consisting of hangers, shackles c.i. m.s. items as per catalogue, ferrous scrap of old un serviceable ber wheel discs with one rings as it is, as per catalogue, non ferrous scrap of old un serviceable ber lead acid batteries 12v x 150 ah 19 plates of plastic container as per catalogue, non ferrous scrap of old un serviceable ber inverter batteries 12v x 150 ah 12v x 180 ah of plastic container as per catalogue, non ferrous scrap of old un serviceable ber shivshahi bus batteries 12v x 180 ah of plastic container as per catalogue, ferrous non ferrous scrap of un serviceable ber old un serviceable auto, general electrical as per catalogue, ferrous non ferrous scrap of old un serviceable all type of engine oil filters and diesel filters, air filter assorted sizes as per catalogue, ferrous scrap of old unserviceable iron dust turning waste as per catalogue, scrap of old unserviceable ber fiber radiator reserve tank as per catalogue...

Due Date : November 27, 2023

Tender Value : ₹ Ref. Documents

View Tender
17
Panvel Municipal Corporation - Maharashtra

40667615 tender for aluminum aerobrise louver sab 100 (150mm module )fixed system ral 9010 color supply and fixing of half fin fixed louver 100 consists of elliptical profiled louver fin skin with crowning manufactured out of 0.70 mm thick enameled corrosion resistance aluminum alloy aa3105 and formed on high speed high precision dallan combi multi stage roll forming system or equivalent. the roll formed fin profile is mechanically fixed between aluminum extruded press plate and continuous assembly channel. the nylon end caps shall be provided on both sides of the fins. the louver fins will be provided in the module of 150 mm cc. the louver fin skin shall be nos 1 activities : supplying & installation etc. complete of below mentioned type items. coil coated finish suitable for exterior applications....

Due Date : November 22, 2023

Tender Value : ₹ Ref. Documents

View Tender
18
Mira Bhaindar Municipal Corporation - Maharashtra

40654535 tender to provide office furniture and instrument for physiotherapy and other multi disciplinary therapy center 1 office table 2 wooden office table one side three drawers 1200mm x 600mm x750mm ( size 48” ( l ) x 24” ( w ) x 30” ( h ) 3 metal big size cupboardmetal office wardrobe 2 door almirah cupboard with 4 adujustableshelves and locking system powder coated 78x36x19 inch ) 4 godrej 5 laxmi 6 executive chairexecutive chair with high back, revolving chair, ms chrome base / ms powder coating, cushion seat with hydraulic mechanism and heavy duty metal base 7 green soul 8 ample 9 herman miller 10 plastic chair with handle 11 neelkamal 12 cello 13 notice board36” x 24”, rectancular shape with closing door and lock 14 soft board36” x 24”, rectancular shape with aluminium frame 15 shoe rackmaterial –metal, 36”x23”x9” with 5 shelves unit, black metal 16 waiting metal benchstandard silver colour chrome steel material, 64d x 180w x 80h centimeters 17 johnson 18 kunwar 19 sitting stools30d x 30w x 50 h centimeters, silver colour, metal medium size 20 full length wall mirror aluminium frame wall mirror per sq.ft.rate 21 curtains with ( partition purpose ) polyster or satin materialwhitesqaure net at the top7 feet hight with different widthseyelest at top to handusing hooks approximately 2 eyelets per feet 22 rodretractable curtainstrack top mounted room divider curtain rod celling rails set with silent rollers and hooks for living aluminium alloy curtain box curtain rod 23 hospital equipment trolleymedical card trolly on wheels with stainless steel top 40l x 40w x 76 hcm’s ) 24 small dustbins12 liters plastic foot pedal dustbin for office 25 neelkamal 26 cello 27 big dustbins120 liters wheel garbage dustbin 28 neelkamal 29 cello 30 tv screen 43 inches 4k ultra smart led tv 31 onida tv screen 32 lg tv screen 33 samsun tv screen 34 computerall in one 10 th gen processor optiplex 3280 aio 35 hp company 36 dell company 37 printer with scannermulti function laser printer 38 canon 39 hp 40 flex sq.ft 41 banners sq.ft 42 signage sq.ft 43 200 pages register 44 navneet 45 classmate 46 200 pages notebook 47 navneet 48 classmate 49 small note book 50 navneet 51 classmate 52 a4 size paper70 gsm b2b jk copier paper 53 f / c size paper70 gsm b2b jk copier paper 54 cardboard filesprabhat co. carboard files 55 plastic files palstic coated files ( prabhat co. ) 56 stapler stepler machine no. 10 small size kangaroo co. 57 stepler pins ( small pins ) stepler pin no.10 small size kangaroo co. 58 stepler big size stepler machine no.24 / 6 big size kangaroo co. 59 stepler pin big sizestepler pin no.24 / 6 big size kangaroo co. 60 fevicol gluefevicol instant glue 200 ml bottle 61 ink pad ( medium size 70mmx111 mm ) kores co. ( 10 pcs in per box 62 scissormedium size kangaroo co. 63 punching machine small punching machine medium size kangaroo co. 64 punching machine bigpunching machine jumbo size kangaroo co. 65 ball pen 66 cello pinpoint 10 nos. packet 67 reynolds 10 nos. packet 68 montex 10 nos. packet 69 pencils, , sharpener, 70 apsara per box 71 natraj per box 72 camilin per box 73 eraser 74 apsara per box 75 natraj per box 76 doms per box 77 scale 78 natraj per box 79 camilin per box 80 permanat marker 81 cello 82 camlin 83 highlighter pen of different colour 84 camlin co. 85 faber castell 86 u pinskesetko u pins plastics medium size 10 pkt. per box 87 sticky page markerguming sticker post it note no.653 ( size2”x3” ) paper flag four colour 88 pinpin lion brand ( 350 grams per box ) 89 box file office lever clip binder box file 90 neel arch box file 91 neel 92 water spong boxwet sponge finger damper 2.7 inch 93 rubber bandrubber band ( vardan co. ) 45 grams 94 pin boxpin ( with magnet ) box superior quality 95 plastic foldertrasperent plastic protector leaf l...

Due Date : December 04, 2023

Tender Value : ₹ 20 Lakhs

View Tender
20
Department of Defence Production - Maharashtra

40621391 bids are invited for brazed carbide milling cutter for machining of aluminium alloy as per fs / t 1408 b / 2. ( q3 ) , tooling set as per tungaloy c atalogue consists of: ( 1 ) holding shank, vssd16l100s10 s: 01 no. ( 2 ) c ( q3 ) , uncoated carbide insert for medium machng. of al. alloy & non ferrous matl. to iso key code no. wcgt0302 ( q3 ) total quantity : 61...

Due Date : November 13, 2023

Tender Value : ₹ Ref. Documents

View Tender
21
Maharashtra State Road Development Corporation Limited - Maharashtra

40620521 sale of scrap material and vehicles scrap of old u.s ber nylon tyres size 9.00x20 as it is where is as per catalogue, scrap of old u.s ber nylon tyres size 9.00x20 as it is where is as per catalogue, scrap of old u.s ber radial tyres size 9.00x20 as it is where is as per catalogue, scrap of old u.s ber radial tyres size 9.00x20 as it is where is as per catalogue, scrap of old u.s ber radial tyres size 9.00x20 as it is where is as per catalogue, scrap of old u.s ber radial tyres size 9.00x20 as it is where is as per catalogue, scrap of old u.s ber radial tyres size 9.00x20 as it is where is as per catalogue, scrap of old u.s ber radial tyres size 9.00x20 as it is where is as per catalogue, scrap of old u.s ber radial tyres size 9.00x20 as it is where is as per catalogue, scrap of old u.s ber buff nylon radial 9.00x20 10.00 x 20 as per catalogue, scrap of old u.s ber buff nylon radial 9.00x20 10.00 x 20 as per catalogue, scrap of old unserviceable ber radial tyre size 10.00 x 20 as per catalogue, scrap of old unserviceable ber radial tyre size 10.00 x 20 as per catalogue, scrap of old unserviceable ber radial tubeless tyre size 295 x 80 as per catalogue, scrap of old u.s ber rubber tubes with or without valves size 9.00x20 1000x20 as per catalogue, scrap of old u.s ber rubber flaps as per catalogue, scrap of old unserviceable ber cut pieces of tyre tubes flap assorted size as per catalogue, scrap of empty old m.s. empty barrels of engine oil 210 lts capacity a grade as per catalogue, scrap of empty old m.s. grease barrels, 182 kg. capacity without lid as per catalogue, scrap old u.s empty paint thinner ms drums 20 25 lits capacity as per catalogue, scrap of old unserviceable empty pvc barrels 210 ltrs capacity, ferrous scrap of old u. s ber m.s. consisting bus body items, ferrous non ferrous scrap of old unservicable iron allu. m s brass cuting dust turning rusted dust, scrap of old u.s ber misc. rubber items as per catalouge, non ferrous scrap of old u.s ber alluminium sheets as per catalogue, ferrous non ferrous scrap of old unserviceable ber m.s springs leaves assorted sizes, ferrous scrap of old u.s ber miscillinious auto spares as per catalogue, ferrous scrap of old u.s ber special auto gear part as per catalogue, ferrous non ferrous scrap of old unserviceable ber aluminium alloy as per catalogue, ferrous scrap of old u.s ber fly wheel with rings m.s as per catalogue, ferrous scrap of old u.s ber fly wheel rings m.s as per catalogue, ferrous scrap of old u.s ber front and rear brake drums assorted size as per catalogue, ferrous scrap of old u.s ber midibus brk drum as per catalogue, ferrous scrap of old u.s ber crown pinion assly.m.s. assorted size as per catalogue, ferrous scrap of old u.s ber crown wheel pinion casing as per catalogue, ferrous scrap of old u.s ber bell housing new type m.s. assorted size as per catalogue, ferrous scrap of old u.s ber bell housing with or without clutch fork m.s. assorted size as per catalogue, non ferrous scrap of old u.s ber radiator cores of alluminium as per catalogue, non ferrous scrap of old u.s ber radiator intercooler of aluminium as per catalogue, ferrous non ferrous scrap of old u.s ber radiator bracket as per catalogue, ferrous non ferrous scrap of old u.s ber clutch plates with or without hub m.s. as per catalogue, ferrous scrap of old u.s ber pressure plates as per catalogue, ferrous scrap of old u.s ber pressure plates as per catalogue, ferrous scrap of old u.s ber stearing box assy as per catalogue, ferrous scrap of old u.s ber propeller shaft and joint yoke with or without yoke bracket flange as per catalogue, ferrous non ferrous scrap of old u.s ber m.s. c.i armature as per catalogue, ferrous non ferrous scrap of old u.s ber stator as per catalogue, ferrous non ferrous scrap of old u.s ber rotor as per catalogue, ferrous scrap of maillable auto items consisting of hanger shakle as per catalogue, ferrous scrap of old u.s ber wheel disc with one ring as per catalogue, non ferrous scrap of old u.s ber lead acid batteries 12v x 150ah 19 plates plastic container as per catalogue, non ferrous scrap of old u.s ber shivshahi 12v x 180 ah 19 plates plastic container as per catalogue, ferrous non ferrous scrap of u.s ber old u.s auto, general electrical as per catalogue, old u.s scrap burnt oil with barrel aprox 210 ltrs free from water as per catalogue, old u.s scrap burnt greese with barrel as per catalogue, ferrous non ferrous scrap of old u s all type of engine oil filters, diesel filters and air filters as per catalogue, ferrous non ferrous scrap of old u s ber front rear break shoe with or without linner as per catalogue, ferrous non ferrous scrap of old u s ber fiber radiator reserve tank with or without cap as per catalogue, ferrous non ferrous scrap of old us ber rear brake chamber assorted size as per catalogue...

Due Date : November 24, 2023

Tender Value : ₹ Ref. Documents

View Tender
23
Maharashtra State Road Transport Corporation - Maharashtra

40590282 all type of scrap and skeleton lot 1 scrap of old ber nylon tyre size 900x20 as per pdf catalogue, lot 2 scrap of old ber radial tyre size 900x20 as per pdf catalogue, lot 2a scrap of old ber radial tyre size 900x20 as per pdf catalogue, lot 2b scrap of old ber radial tyre size 900x20 as per pdf catalogue, lot 2c scrap of old ber radial tyre size 900x20 as per pdf catalogue, lot 2d scrap of old ber radial tyre size 900x20 as per pdf catalogue, lot 2e scrap of old ber radial tyre size 900x20 as per pdf catalogue, lot 2g scrap of old ber shivshai tyre size 295x80r16 5 as per pdf catalogue, lot 2 h scrap of old ber radial tyre size 1000x20 as per pdf catalogue, lot 2i scrap of old unservisable b.e.r.radial tyre size 900x20 as it is, lot 3 scrapped buffed tyres of nylon and radial of kept as it is as per pdf catalogue, lot 5 scrap of old ber nylon radial tube assorted as it is as per pdf catalogue, lotcode 7scrap of old unservisable ber rubber flaps of tyre, lot 8 scrap of old ber pieces of tyres tubes and flaps assorted sizesas it is as per pdf catalogue, lot 9 scrap of old ber empty ms engine oil barrel a grade 210 ltr cap as it is as per pdf catalogue, lot 14 scrap of old ber empty ms paint thinner brake oil drums 20 25 ltr cap as per pdf catalogue, lot 14a scrap of old ber empty vulcanising solution drums 25 ltr cap as per pdf catalogue, lot 15 scrapped of old empty plastic coolant barrel 210 ltr discription as per pdf catalogue, lot 16 scrap of old us rubber dust of tyre as per pdf catalogue location trp nahik, lot 16a scrap of old us rubber cutting pices of tyre as per pdf catalogue location trp nahik, lot 17 scrap of old us card board of packing as it is as per pdf catalogue location, lot 18 scrap of old unservisable ber plastick packing paper, lot 19 scrap of old ber cut pieces of rexine foam fancy rider as it is as per pdf catalogue, lot 21 scrap of old ber ms as per pdf catalogue, lot 21a scrap of old ber rusty ms as per pdf catalogue, lot 27 scrap of old ber misc rubber as per pdf catalogue, lot 28 scrap of old ber alluminium body material as it is per pdf catalogue, lot 30 scrap of old ber ms steel spring leavs as per pdf catalogue, lot 31 scrap of old ber misc auto spares as per pdf catalogue, lot 32 scrap of old ber gear parts as per pdf catalogue, lot 33 scrap of non ferrous alluminium piston discription as per pdf catalogue, lot 34 scrap of old ber alluminium alloy as per pdf catalogue, lot 37ferrous scrap of old unservisbale ber crankshaft as per pdf catalouge, lot 38 scrap of ferrous old us ber fly wheel assy as per pdf catalogue, lot 43 scrap of old ber flywheel ring as per pdf catalogue, lot 47a scrap of ferrous non ferrous old us ber ven pump with or without pully as per pdf catalogue, lot 50 srcap of old us ber automiser nozzale as per pdf catalogue as it is, lot 50b scrap of old us ber assorted size atuomiser body kept as it is as per pdf catalogue as it is, lot 51 scrap of old ber gb main shaft tc as it is as per pdf catalogue as it is, lot 51 a ferrous scrap of old us ber gear counter shaft as it is as per pdf catalogue as it is, lot 51 b ferrous scrap of old us ber gb main shaft bs iii as it is as per pdf catalogue as it is, lot 52 scrap of old ber tata frt rr wheel brk drums assorted sizes as per pdf catalogue as it is, lot 53 scrap of old ber rr axle shaft ms tata assorted sizes as per pdf catalogue as it is, lot 53a ferrou scrap of old ber rear hub midi bus kept as it is as per pdf catalogue as it is, lot 54 ferrous scrap of old ber crown wheel assly kept as it is as per as per pdf catalogue as it is, lot 54a ferrous scrap of old ber crown wheel with pinion mesh set kept as it is as per as per pdf catalogue as it is, lot 55 scrap of old ber bearing iincluding of cone ball cageassorted size as it is, lot 55a ferrous scrap of old us ber clutch realease bearing discrption as per catalogue as it is, lot 56 ferrous scrap of old ber gear box casing gb 40 with top s per catalogue as it is, lot 57 ferrous scrap of old ber bell housing of cast iron tcbsii bsiii as per catalogue as it is, lot 57a ferrous scrap of old ber bell housing of cast iron tcic as per catalogue as it is, lot 58b ferrous scrap of unservisable ber radiatore core allu as per catalogue as it is, lot 58c ferrous scrap of unservisable ber radiatore bracket as per catalogue as it is, lot 59a scrap of old ber radiator intercooler as per pdf catalogue, lot 60 scrap of old us ber clutch plate with or without facing as it is as per pdf catalogue, lot 60a scrap of old us ber gear box houging as it is as per pdf catalogue, lot 60b scrap of old us ber gear box houging as it is as per pdf catalogue, lot 62 ferrous scrap of old us pressure plate bsiii as per pdf catalogue, lot 62a scrap of old us ber pressure plate shivshai as per pdf catalogue, lot 62b scrap of old us ber pressure plate bs ii as per pdf catalogue, lot 62c scrap of old us ber pressure plate back plate as per pdf catalogue, lot 63 ferrous scrap of old unservisable ber ms diseal tanks big in assorted size as it is as per pdf catalogue, lot 63a ferrous scrap of old unservisable ber ms diseal tanks in small size assorted size as it is as per pdf catalogue, lot 65 scrap of old ber power steering box asslywith or without arm as it is as per pdf catalogue, lot 65c ferrous scrap of old ber pull and push rod as it is as per pdf catalogue, lot 65 d ferrus scrap of old us ber tie rod as it is as per pdf catalogue, lot 67 scrap of old ber ms steel propeller shaft with or without yoke bracket and flange as per pdf catalogue, lot 68a scrap of old ber altarnetor rotar assorted sizes as per pdf catalogue, lot 69 ferrous non ferrous scrap of old unservisable ber starter armature assorted size as it is s per pdf catalogue, lot 69 b ferrous non ferrous scrap of old unservisable ber stator assorted size as it is s per pdf catalogue, lot 71 scrap of old us ber brake shoe frt and rr as it is s per pdf catalogue, lot 72 ferrous scrap of old unservisable ber front and rear break linning assorted size as it is as per pdf catalouge, lot 73 scrap of old ber melleable auto items as per pdf catalogue, lot 79 scrap of allluminium rivets cut piceses sorting not allowed, lot 80 ferrous scrap old unservisable ber broken windshild glass as it is as per pdf catalogue, lot 83 scrap of old ber lead acid battery 12v150 ah as per pdf catalogue, lot 88 ferrous scrap of old air tank as it is as per pdf catalogue, lot 89 scrap of old us ber scrap of full circle curring bags 900 x 20 s it is as per pdf catalogue, lot 90 scrap of old us ber scrap of rubber envelops 900 x 20 s it is as per pdf catalogue, lor 91 non ferrous of old unservisbale ber brass rivet brass cutting brass bushing as it is as pef pdf catalouge, lot 92 scrap of old ber auto general electrical material as per pdf catalogue, lot 93 scrap of old ber teakwood and plywood sheet pieces as per pdf catalogue, lot 94 workshp sweep as it is ms aluminium will be withdrawn at the time of delivery, lot 95 scrap of old ber used burnt engine oil with barrel as per pdf catalogue, lot 95a scrap of old ber used grease and oil mix sludged water with barrel as it is as per pdf catalogue, lot 98 a scrap of old ber wooden bed 3 nos sofaset 2 nos with chair4 nos as it is as per pdf catalogue, lot 98 lscrap of old us ber amplifiere as it is as per pdf catalogue, lot 100 ferrous scrap of old us ber broken piece of sintex water tank ms broken plastic dru plastic pices jar fiber dom fiber bonnet as it is as per pdfcatalogue, lot 104 scrap of old ber all types of filters as per pdf catalogue, lot 106 non ferrous scrap of old us ber copper item copper wire bounch auxillay coil as it is as per pdf catalogue, lot 107 a ferrous scrap of us ber iron dust turning waste rusted as it is as per pdf catalogue, lot 115 ferrous no ferrous scrap of old us ber tata 05 vechicles only bus body skeletonmh07c9337 mh07c9332 mh07c9516 mh07c9434 mh14bt3338 as it is as per pdf catalogue, lot 115a ferrous no ferrous scrap of old us ber tata 04 vechicles only bus body skeletonmh07c9336 mh07c9346 mh07c9512 mh07c9261 as per pdf catalogue as per pdf catalogue, lot 115b ferrous no ferrous scrap of old us ber tata 05 vechicles only bus body skeleton mh14bt4524 mh07c9339 mh07c9513 mh07c9431 mh14bt4116 as per pdf catalogue, lot 120 ferrous scrap of old us ber frt brk chamers as it is as per pdf catalogue, lot120 a ferrous scrap of old us ber rr brk chamers as it is as per pdf catalogue...

Due Date : November 20, 2023

Tender Value : ₹ Ref. Documents

View Tender
24
Public Works Department - Maharashtra

40578809 proposed non ssr items for palghar district sports complex project at dist palghar , item , providing and laying cast in situ / ready mix cement concrete m 40 post tensioning in pt slabs & pt beams for the loading as mentioned in relevant drawing as per the technical specifications including decoiling the strands, cutting to the required lenghts, supplying & laying of ht strands ( tata make ) , sheating ( gi ducts ) , jointing with couplers & inserting the strands, profiling, fixing live end anchorages including the supply of stressing anchorages, grout vents, making dead end anchorages including flowering the strands, fixing tendon support bars, supervising the fixing of anti bursting reinforcement, stressing the cable end trimming, grouting the cables with cement slurry mixed with approved admixtures with required tools , plants, machineries & consumables etc. including demarcationon soffit of the slab with 100 wide red paint indicating cable profiles, including obtaing approval from client / consultant for the work doneof trap / granite / quartzite / gneiss metal for r.c.c. slabs and landingsas per detailed designs and drawings includingcentering , formwork, cover blocks, laying / pumping, compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, ( excluding reinforcement and structural steel ) with fully automatic micro processor based plc with scada enabled reversible drum type mixer / concrete batch mixplant ( pan mixer ) etc. complete, with fine aggregate ( crushed sand v.s.i. grade ) . including , providing, supplying & fixing on site glass fibre reinforced polymer ( gfrp ) rebars in lieu of tmt 500 of various specified diameters and of approved make conforming to irc:137:2022 as per detailed designs, drawings & schedules and mounted on plastic clips / knotting wire including all material, labour, necessary tools & plants, transportation, stocking / stacking, all leads & lifts, taxes except gst, loading & unloading, cleaning, etc. complete ( item to be used only in concrete roads, storm water drains, gutters, in buildings for plinth level pcc with nominal reinforcement only ) 4mm , 6mm , 7mm , 8mm , 10mm , 12mm , 14mm , 16mm , 18mm , 20mm , 22mm , 25mm , 32mm , providing & fixing door frame made out of 12mm & 18mm bwp with approved mica laminates etc.complete item , providing and laying in trenches 65 mm dai. upvc pipe including necessary excavation, fittings. refilling trenches etc. complete. including removing existing pipe line if necessary and conveying and stacking the same complete. , providing and laying in trenches 80 mm dai. upvc pipe including necessary excavation, fittings. refilling trenches etc. complete. including removing existing pipe line if necessary and conveying and stacking the same complete. , providing and laying in trenches 100 mm dai. upvc pipe including necessary excavation, fittings. refilling trenches etc. complete. including removing existing pipe line if necessary and conveying and stacking the same complete. , providing and laying in trenches 150 mm dai. upvc pipe including necessary excavation, fittings. refilling trenches etc. complete. including removing existing pipe line if necessary and conveying and stacking the same complete. , nssr item for plumbing foot ball ground 1.22 providing and laying in trenches 100 mm width power drain belt including necessary excavation, fiittings. the same complete. , providing and laying in trenches 80mm perforated corrougated pipe with geo fabric including necessary excavation, fiittings the same complete. , nssr item for plumbing boi disetor phyatoride system planed bed unit: the planed bed works on the principle of sequential aerobic and anoxic treatment. this unit uses novel filling media. the planed bed is sown with semi aquatic, aquatic, ornamental, flowering species of plant, where the wastewater flows in a sinusoidal manner to achieve the better efficiency of treatment. this unique baffle and wall arrangement increases the contact time with the microbes and the plant roots and provides alternate aerobic and anoxic phases in the same reactor leading to sbr, mbbr type operations. in this unit the bed is filled with different size filling media and wetland plants such as colocasiaesculenta, canna indica, yperusalternifolius, etc. 13 kld commercial complex , 25kld admin building , 90kld spectactor 01 , 90kld spectactor 02 , nssr item for irrigation p / f 16mm main lateral 4 lph as drip line with dripper as per specificatio icluding excaation, laying & other necessary work complete , providing and fixing adjustable speed of rotating 0 to 65 second. it is gear driven, sloted grease lubricated gear drive poup up height 13 cm area covered 32.5 to 46.3m radius ( st 1600 hs b ) , mp rotator sprinkler: multi stream, multi trajectory rotating stream sprinkler with double popup. in full or part circle model covering 2.5 mtr to 9.4 mtrradius at 2.5 bar pressure with an equivalent full circlethe adjustment ring shall be effective only while the sprinkler is popped up and shall be ineffective while the sprinkler is popped down. the sprinkler shall be fitted with a detachable filter. installed on popup bodies having a 4” popup male threaded stem with ½ fipt threaded adapter. with check valve sprinkler with 10 to 10.6 mtr radius. , 4 pop up plastic rotor : heavy duty commercial grade for parks & garden , 1 female inlet, exposed dia 2, discharge rate 1.59 to 6.4 cumh. radius of coverage 16 to 21 mtrs. recommended pressure 3 kg. / sq.cm to 6.9 kg. / sq.cm., nozzle trajectory 25 deg. small exposed heavy duty rubber cover, four elbow swing joints & check valve. , 2 or 4 inch pop up adjustable rotor plastic : heavy duty commercial grade, 3 / 4 female inlet, discharge rate 0.2 to 3.36 cumh. radius of coverage 8 m to 14.3 mtrs. recommended pressure 2.1 kg. / sq.cm to 4.8 kg. / sq.cm., nozzle trajectory 25 deg. integral rubber cover & with four elbow swing joint & check valve , impact pop up 1 / 2 female inlet, heavy duty plastic adjustable sprinkler 3.2 mm. nozzle & plastic heavy duty housing, operating pressure 2 kgf to 4 kgf. flow= 570 to 810 lph. with 4 elbow swing joint. , sst manifold and isolation valve with flexible stainless inlet hose , providing and erecting disc filter : is 12785 : 30 m3 / hr. flow capacity plastic ribbed body construction manufactured from plastic alloy material withstanding maximum pressure of 10 kg. / cm2. bspt. 2 male threaded standard end connection. to be provided with disc filtration element of 100 micron size , pvc ball valve 50mm: isi marked withstanding at least 10 kg. / cm2 pressure. , air / vacuum release valve 1”: plastic rigid pvc. body continuous acting air release valve during start up& operation of the system. acts as vacuum breaker while drain off. 1” bsp male threded end connection. to be provided with required riser assembly. withstanding maximum line pressure of 10 kg. / cm2. with all fittings , providing erecting 2.5 glycerinefillled pressure gauge etc . , providing erecting 50 mm dia6kg , 6 rigid pvc pipeisi etc. complete. , providing erecting 63 mm x 6.0 kg x 6 mter rigid pvc pipe isietc. complete. , providing erecting drip 63mm pvc ball valve plane type etc. , providing erecting flush valve 2 mm etc. , valve box and accessories : supplying and erection of valve box and there accessories, circular / rectangular model with rugged reinforced plastic constructionand robust top cover with non slippery grips and provisions of snap fit type locking arrangement including all material labour, hydraulic testing and commissioning all complete as per the direction of engineers in charge. a ) 10 round valve box , b ) 6 round valve box , providing and fixing service saddle , swing joint : ½” x 30 cm ( 12” ) standard swing joint, 4 swing elbows , pressure release valve 2.3 kg / cm2 to 8 kg / cm2 , supply & placing of geotextile seperation barrier to cover the entire field including the edges. geo textile barrier 220 225 gsm , garware make or equivalent make nylon mesh [ 50mm x 50mm ] , 2.5mm thick , part b sports related items fixed volleyball post providing and fixing of standard volleyball fixed pole pair regular model with heavy duty ms pipe, height adjustable for juniors, men or women made of 3x4 pipe epoxy painted comprises a special internal ratchet system comprises a special internal ratchet system with garware tournament quality net ...etc comple and as directed by engineer in charge , supply and installation ofhaving thickness of 6mm comprising of 4mm prefabricated sbr mat followed by 2mm pu coatings. seamless, non porous and smooth surface for very good resiliency for comfort, injury prevention, sustainability through high content of recycled and renewable raw materials in combination with lasting performance through very good mechanical strength, wear resistance and easy maintenance, repair & resurface procedures. system consist ofsbr matt being laid using two component pu adhesive followed by sealer to fill in all the pores of sbr mat, 2 coats of pu resin layer followed by top pu coat and game line marking...etc comple and as directed by engineer in charge , wrestling matt supplying & fixing surface that is approved by world taekwondo federation ( wtf ) . material: xpe, leather with pattern technology improvement: low ratio xpe and dedicated leather with pattern, absorbing energy, great performance of buffering, excellent breathability, soft surface; compounded by fire, connected by toothed edge, more stable.etc comple and as directed by engineer in charge ( tile size of 1m x 1m x 50mm, colour options red, blue, yellow, green ) , judo matt supplying & fixing surface that is approved by world taekwondo federation ( wtf ) . material: xpe, leather with pattern technology improvement: low ratio xpe and dedicated leather with pattern compounding to this new model mat. 8m octagonal competition area is blue, safety area is red. absorbing energy, great performance of buffering, excellent breathability, soft surface; compounded by fire, connected by toothed edge, more stable. ( tile size of 1m x 1m x 50mm, colour options red, blue, yellow, green ) , supply and installation of european origin heterogeneous sports vinyl flooring 6.7mm thickness with sheet width not less than 2.0 metre width jointed with seamless thermo welding laid with suitable premium adhesive@ 0.25kg / m2 over suitable subbase, conforming to manufacturers specifications including line marking for the specific sports area ( basketball court, badminton court, tennis court & gymnasium etc., ) with 2c polyurethane / epoxy marker paint of approved quality and as directed by the engineer in charge. the sports flooring shall be ( i ) bacterial resistant, ( ii ) thermo welding of joints of flooring shall be by heat process to make seamless floor finish, ( iii ) the joints in the flooring shall be sealed by using a pvc welding bar of matching colour using hot air gun. the product shall be floor score, fiba, bwf & ihf certified, its bwf certification shall be of grade 1 ( bwf international elite ) . product should have been installed in top institute of india i.e. iit, nit or equivalent. technical standards of product are as per following; surface finish : xpur scuff resistant surface, backing: combined closed cell foam, weight: 3.6 kg / m2 as per en iso 23997 standards, roll size: 2 meter width x 15 meter length ± 1%, product specification should fall under en 14904 ( category p1 ) , impact sound insulation: 22 db as per en iso717 2 standards thermal resistance: 0.07 m2 k / w, reaction to fire: c fls1, formaldehyde emission: no formaldehyde , pentachlorophenol: no pentachlorophenol, friction: 80 110 as per en 13036 4 standards, shock absorption: >25% en 14808 , vertical deformation: 1.08mm en 14809, ball rebound: 97% as per en 12235, specular gloss: < 30 as per en 2813, dimensional stability: ± 0.2% en iso 23999, indentation resistance: <0.5mm en 1516, resistance to rolling load: 1500 n as per en 1569, colour fastness: 6 iso 105 b02, chemical resistance: no change eniso 26987, abrasion resistance: < 250 mg / 1000cycles as per en iso 5470 1 standards and product is solvent and heavy metal free.....etc complete , supply and installation of european origin heterogeneous sports vinyl flooring 6.7mm thickness with sheet width not less than 2.0 metre width jointed with seamless thermo welding laid with suitable premium adhesive@ 0.25kg / m2 over suitable subbase, conforming to manufacturers specifications including line marking for the specific sports area ( basketball court, badminton court, tennis court & gymnasium etc., ) with 2c polyurethane / epoxy marker paint of approved quality and as directed by the engineer in charge. the sports flooring shall be ( i ) bacterial resistant, ( ii ) thermo welding of joints of flooring shall be by heat process to make seamless floor finish, ( iii ) the joints in the flooring shall be sealed by using a pvc welding bar of matching colour using hot air gun. the product shall be floor score, fiba, bwf & ihf certified, its bwf certification shall be of grade 1 ( bwf international elite ) . product should have been installed in top institute of india i.e. iit, nit or equivalent. technical standards of product are as per following; surface finish : xpur scuff resistant surface, backing: combined closed cell foam, weight: 3.6 kg / m2 as per en iso 23997 standards, roll size: 2 meter width x 15 meter length ± 1%, product specification should fall under en 14904 ( category p1 ) , impact sound insulation: 22 db as per en iso717 2 standards thermal resistance: 0.07 m2 k / w, reaction to fire: c fls1, formaldehyde emission: no formaldehyde , pentachlorophenol: no pentachlorophenol, friction: 80 110 as per en 13036 4 standards, shock absorption: >25% en 14808 , vertical deformation: 1.08mm en 14809, ball rebound: 97% as per en 12235, specular gloss: < 30 as per en 2813, dimensional stability: ± 0.2% en iso 23999, indentation resistance: <0.5mm en 1516, resistance to rolling load: 1500 n as per en 1569, colour fastness: 6 iso 105 b02, chemical resistance: no change eniso 26987, abrasion resistance: < 250 mg / 1000cycles as per en iso 5470 1 standards and product is solvent and heavy metal free. , supply and installation of european origin, fiba, bwf & ihf certified, point elastic polyurethane flooring pulastic classic 110 having thickness of 11mm comprising of 9mm prefabricated sbr mat followed by 2mm pu coatings. seamless, non porous and smooth surface for very good resiliency for comfort, injury prevention, sustainability through high content of recycled and renewable raw materials in combination with lasting performance through very good mechanical strength, wear resistance and easy maintenance, repair & resurface procedures. system consist ofsbr matt being laid using two component pu adhesive followed by sealer to fill in all the pores of sbr mat, 2 coats of pu resin layer followed by top pu coat and game line marking. product should meet european standards en 14904 p1 category, shock absorption: 28% as per en 14808, vertical deformation: 1.4mm as per en 14809, friction value according to en 13036 4 should be on or above 107, ball bounce: 98% according to en 12235, gloss: 5% as per en 2813, resistance to rolling load: = 1500 n as per en 1569, resistance to impact: = 800 gr @ 10°c & = 1200 gr @ 23°c as per en 1517, resistance to indentation: 0, 35 mm @ 5 min & 0, 15 mm @ 24 hrs as per en 1516, resistance to wear: < 340 mg as per en iso 5470, flammability: bfl s2 as per en 13501 1, improvement impact sound insulation ( ?lw ) : 21db according to iso 717 2, v.o.c. content – adhesive / resins solvent free, resin composition free of solvents and heavy metals, elongation at break: structure 150 % as per din 53455, tensile strength: structure 8 n / mm² according to din 53455, tear strength: structure 25 n / mm according to din 53515. consumption of materials has be as per standards which is 0.90kg / sqm adhesive for sbr matt, 0.5kg / sqm sealer, 2.8kg / sqm pu wear coating followed by 0.14kgsqm top pu color coat. product should be manufactured under iso 9001 for quality management , iso 14001 for environmental care and iso 26000 for corporate sustainability. , moveable football goal post competition ( professional ) *made with branded high quality ms steelnpipe in 4 dia *junior football goal post *branded epoxy paint *rust & corrosion free *zero vibration *size options: 24x8 with 1.5 back support. *the poles comprise wheels which make it easy to move , providing and laying geotextiles sheet permeable nonwoven 250 gsm four metre roll width & 100 metre length. , providing and laying iaaf approved synthetic athletics track ( maroon colour ) full pur system minimum 15mm thick iaaf certified system including line marking and attaining class i certificatin from world athletic federation.the world athletic federation certificate must mention the thickness of the product which should be minimum 15mm as per the certificate, the product must be free of volatile organic compound ( report should be attached with the specs ) .full pur system duly world athletic federation certified, spread with sbr ( recycled rubber ) in first 2 layers and coloured epdm granules in final layer must be water impermiable layer consist of bound sub base ( closed asphalt ) , for rubber granules 1 4 mm fixed with a cast coating 5 mm per layer & structured cast coating 3 5 mm spread with epdm 1 4 mm.system should fullfill the following properties water impermiable, porefilled, self leveling, jointless, granulated surface for anti slip properties can handle constant stresses by spikes, dynamic elasticity, excellent appearance & colours, including markings on the surface all complete as per requirements / specifications laid down by world athletic federation & class 1 certification as per iaaf. ( i ) normal stress areas with a minimum thickness of 15 mm of finished tracksurface. , ( ii ) high stress areas with a minimum thickness of 20 mm of finished tracksurface. , ( iii ) high stress areas with a minimum thickness of 25 mm of finished track surface , discus throwing circle aluminium ( aluminium discus circle made of heavy duty aluminium. this can be folded in 2 parts for easy transportation. iaaf certified ) , discus throwing cage ( pole vault inlay & cover ( made of heavy duty 92 mm square steel tube, hot galvanized for long life. poles can be detached from centre for easy transportation and hinged for easy lifting during installation. all poles are bound together with the help of tie bars for sturdiness of the cage. machine knitted 5 mm thick net with square mesh of size 40 mm. net is uv stabilized for long life. steel tube is used on the top of the net to avoid sagging.cage with netting, iaaf certified ) , hammer throwing circle aluminium ( made of thick aluminium alloy in angle type construction. constructed in two halves. best quality nickel plated hardware used for assembling the unit. easy to assemble and can be folded very easily for convenient transportation & storage.iaaf certified ) , discus and hammer throwing cage ( made of heavy duty 100 mm square steel tube, hot galvanized for long life. poles can be detached from centre for easy transportation and hinged for easy lifting during installation. easy to bind the poles together with the help of tie bars for sturdiness of the cage. gates are attached to the poles using four hinges and both gates include wheels for easy movement. net is5 mm thick ( machine knitted ) with 40 mmsquare mesh. net is uv stabilized for long life. steel tube is used on the top of the net to avoid sagging. iaaf certified cage with netting ) , shot put throwing circle aluminium ( made of thick aluminium alloy in angle type construction. constructed in two halves. best quality nickel plated hardware used for assembling the unit. easy to assemble and can be folded very easily for convenient transportation & storage.iaaf certified ) , take off board system ( latest design take off board system, made of solid wood. welded aluminium tray protects take off area and facilitates easy replacements of take off board and plasticine board. comes with heavy construction aluminium blanking lid for durability.iaaf certified ) , triple jump take off board system ( stop board made of fibre designed for depressed pad.iaaf certified ) , fibre stop board competition ( stop board made of fibre designed for depressed pad.iaaf certified ) , water barriers ( heavy duty foldable beam made square pipe inside & covered with thick water proof solid plywood. base legs & base made of steel square pipe with spring loaded snap lock system for easy adjustment of three different required heights. 762m.m. , 838m.m. , 914 m.m. legs are fitted into sockets grouted in to the ground. painted with premium quality poly urethane paint for longer life & durability. easy to install & foldable to transport.iaaf certified ) , pole vault box competition ( welded stainless steel construction. comes with blanking board made of aluminium. sockets at bottom for drainage of water.iaaf certified ) , track kerbing ( heavy gauge aluminium features a box profile top. held in place by 10 mm tall ribbed feet. raised 10 mm off the track surface for rapid drainage. each section of kerbing is milled to allow easy drop in or removal of corresponding sections. available in raw or anodized finish. iaaf certified ) , construction of various play courts ( i, e, volley ball, kho kho, kabbadi, etc ) as per detailed drawing and direction of engineer in charge consisiting of various layers i.e. 150mm thick compacted rubble soling, 50mm thick hard murum layer, 100mm thk 1 layer of brick on edge including filling gaps in sinders of brick bats, 30mm thk , loose 20mm thk compacted mother soil ( including 30% black soil, 40% sand, 30% garden soil, including screening in 6mm jali & laying in layer by layer with rolling by light roller ) including compacting and curing and even and well levelled surface to be given with wet lime marking and all other relevant details as per above said norms etc. complete. , construction of sand filling in jumping pits, including cost and conveyance of all materials and labour charges to the site to fill the sand in pits and complete finished item as per drawing and as directed by engineer incharge. , construction of steeplecase pit insided portion as per iaaf drawingand as directed by engineer in charge , supplying & laying of artificial turf for football: proviiding, supplying & installing on site extreme wear resistant football turf with expected life of 10 12 years. product should pass 60, 000 cycles of lisport xl test ( highest for any sports turf in india currently ) of hero make or equivalent. berlin hero 18, 000 dtex, pile height 50mm, 18, 000 dtex, double pp + pu backing + mesh, 14 / 10cm stitches, density 8820, roll size 4m x 30m or as specified, diamond shape grass. fifa licensee supplier product. roll size 4m x 30m or as specified, warrantee upto 8 years, product passes 60, 000 cycles in lisport xl test....

Due Date : November 16, 2023

Tender Value : ₹ Ref. Documents

View Tender
25
Department Of Fertilizers - Maharashtra

40559123 bids are invited for 1 power transducer, input: 0 1 amps through ct; 110 v through pt, 50hz. output: 4 20 milliamps dc, auxiliary supply: 24 volt dc. suitable for 3 phase 3 wire unbalanced load, accuracy 0.5. true rms measurement.fully onsite programmable input range. duel output. seven segment lcd display. din rail mounting. rishabh instruments cat no: rishcon p. 2 voltage transducer, pt sec: 110vac, 50hz. range: 88 132 volt. output: 4 20 milliamps dc, programmed as: 0 88v i / p=0 4ma o / p; 88 132=4 20ma. auxiliary supply: 24 volt dc. accuracy 0.2. true rms measurement. fully onsite programmable input range. duel output. seven segment lcd display. din rail mounting. rishabh instruments cat no: rishcon v. 300129501 5 no 3 current transducer, ct input: 1 or 5 amp site selectable, 50hz. output : 4 20 milliamps dc, aux supply: 24 volt dc. true rms measurement. accuracy 0.2. fully onsite programmable input range. duel output. seven segment lcd display. din rail mounting. rishabh instruments cat no: rishcon i. 300129503 5 no 4 frequency transducer, nominal input 57 to 500 volts, range: 45 55 hz. output: 4 20 milliamps dc. auxiliary supply: 24 volt dc. accuracy: 0.2. fully onsite programmable input range. duel output. seven segment lcd display. din rail mounting. rishabh instruments cat no: rishcon hz. 300129504 5 no 5 voltage transducer, direct 415vac, 50hz. range: 330 480 volt. output: 4 20 milliamps dc, programmed as: 0 330v i / p=0 4ma o / p; 330 480v= 4 20ma. aux supply: 24 volt dc. accuracy 0.2. true rms measurement. fully onsite programmable input range. duel output. seven segment lcd display. din rail mounting. rishabh instruments cat no: rishcon v. 300129502 2 no 6 power transducer, input: 0 5 amps through ct; 110 v through pt, 50hz. output: 4 20 milliamps dc, auxiliary supply: 24 volt dc. suitable for 3 phase 3 wire unbalanced load, accuracy 0.5. true rms measurement. fully onsite programmable input range. duel output. seven segment lcd display. din rail mounting. rishabh instruments cat no: rishcon p. 300129499 2 no 7 type : multi transducer input: 100 to 693v l l 1 to 6a ( configurable ) output : 4 analog outputs 0…20ma or 0…10v 2 digital outputs communication port : rs 232 accuracy class : 0.2 for voltage & current class : 0.15 for frequency class : 0.25 for power & power factor 300149935 2 no 2 auxiliary supply: 24...60vac / dc make: rishabh instruments model no: rish ducer m42 8 type : multi transducer ( trms ) input : 100 to 600v l l, 1 or 5a output : analog outputs 0…20ma & 0 / 2 relay ( m 42 m 22 m 40 ) communication port : modbus rs 485 & usb accuracy class : 0.2 for voltage & current class : 0.2 for frequency class : 0.5 for power & power factor active energy class 0.5s as per 62053 22 auxiliary supply: 24..240vac / dc make: rishabh instruments model no: rish con m+ 300149936 2 no 9 rish ducer tv808 isolation amplifier auxiliary supply: 24...60vac / dc make: rishabh instruments model no: rish ducer tv808 300149937 2 no 10 digital dual parameter meter displaying v+hz. front size 144x144 input 110vac, 50hz. aux.supply 110vdc. red led display height 1, accuracy class 0.5, make ae, rishab, imp or meco. 300100065 3 no 11 digital dual parameter meter displaying v+hz. front size 96x96 input 100 to 440vac, 50hz. aux.supply 85 to 265vac. red led display height 1, accuracy class 0.5, make ae, rishab, imp or meco. 300100066 3 no 12 digital dual parameter meter displaying v+v. front size 144x144 input 110vac, 50hz. aux.supply 110vdc. red led display height 1, accuracy class 0.5, make ae, rishab, imp or meco. 300149944 3 no 13 digital dual parameter meter displaying f+f. front size 144x144 input 110vac, 50hz. aux.supply 110vdc. red led display height 1, accuracy class 0.5, make ae, rishab, imp or meco. 300149945 3 no 14 external portable ssd hard disc 2tb 1050mb / s r, 1000mb / s w, 3mtr drop protection, ip65 water / dust resistance, hw encryption, pc, mac & typec smartphone compatible, 5y warranty, external ssd connectivity wired external interface usb type shock resistant. 300148744 3 no 15 industrial heavy duty wall fan ( air circulator ) , supply 230vac, 50hz three speed, vertical adjustable, alluminium alloy blade, 1440rpm sturdy close mesh guard, 90 deg. oscilation. air delivery 9000m3 / hr. sweep 450mm ( 18 inch ) make almonard tempest or cg / bajaj / usha. 300120639 3 no 3 16 heavy duty exhaust fan, 380mm sweep, air flow 3200 cubic meter / h with totally enclosed 3phase induction motor , 440v, 50hz, 150w, 1400 rpm, max sound level 65 db, is 2312 1967, double ball bearing. make almonard ( model 380h / d ) / crompton . 300098910 4 no 17 heavy duty industrial fan ( man cooler ) 600 mm.sweep, 1440 rpm, 240v, ac, single phase, 50hz, 180w, no of blades 3 ( of aluminium alloy one piece ) , double ball bearing, 90 degree oscillation, sturdy close mesh guard, mounted on the sturdy ms pipe support of od 2 dia and adjustable height of 1250 to 1500mm from ground to centre of the fan with solid base. make : almonard / usha / bajaj / crompton / alder only 300096941 5 no 18 supply of energy efficient brushless direct current pedestal fan as per specification with remote control and mounting hardware. technical specifications are as follows. 1. blade sweep 400 mm 2. fan motor brushless direct current motor 3. applicable standard is 1169 / 1967 4. operating voltage 140 to 285 volt, single phase ac 5. rated frequency 50 hz + / 5% 6. rated power input 30 watt maximum 7. rated speed min. 1300 rpm 8. power factor 0.9 minimum 9. rated air delivery 75 cubic meter per minute or better 10. rated service value 2.5 cu.m. / min / watt minimum 11. no. of blades three 12. speed control a ) remote: 3 speed with boost & oscillation mode control , b ) push button off, on& 3 speed, boost & oscillation mode 13. motor body: plastic 14. blade material: polypropylene 15. thd < 5% 16. bearings double ball bearings 17. warrenty five years 18. make crompton / bajaj / havells / atomberg / superfan or equivalent 19. colour white 20. documents along with the bid copy of type test certificate as per is 1169 / 1967 from cpri / erda / ertl or any nabl accredited for the offered pedestal fan along with the bid and at the time of supply of material. 21. vendor shall indicate actual input power comsumption and other technical details of the offered fan as per attached technical data sheet. the price evaluation of technically approved tenderer shall be carried out as per attached price evaluation sheet. 300134101 4 no 4 19 industrial heavy duty exhaust fan, 450mm ( 18 ) sweep size, heavy duty, with following specification, speed: 1400rpm, suitable for single phase supply voltage: 230 v ac 50 hz. fan should have epoxy painting, dynamically balanced blades, double ball bearing. mounting accessories like frame, rubber bushing should be supplied along with. make: havells, crompton, gec, almonard or any reputed make. 300097797 4 no 20 wall mounting fan, 400 mm sweep, 230vac 1300 rpm with built in speed regulator , three blade type prima / innova / crompton / rallies or equt.reputed make 300055085 3 no 21 supply of energy efficient brushless direct current wall mounted fan as per specification with mounting hardware. technical specifications are as follows. 1. blade sweep 400 mm 2. fan motor brushless direct current motor 3. applicable standard is 555 / 1979 4. operating voltage 140 to 285 volt, single phase ac 5. rated frequency 50 hz + / 5% 6. rated power input 30 watt maximum 7. rated speed min. 1300 rpm 8. power factor 0.9 minimum 9. rated air delivery 75 cubic meter per minute or better 10. rated service value 2.5 cu.m. / min / watt minimum 11. no. of blades three 12. speed control a ) pull cord or single based control , b ) rotary switch 13. motor body: plastic 14. blade material: polypropylene 15. thd < 5% 16. bearings double ball bearings 17. warrenty five years 18. make crompton / bajaj / havells / atomberg / superfan or equivalent 19. colour white 20. documents along with the bid copy of type test certificate as per is 555 / 1979 from cpri / erda / ertl or any nabl accredited for the offered wall mounted fan along with the bid and at the time of supply of material. 21. vendor shall indicate actual input power comsumption and other technical details of the offered fan as per attached technical data sheet. the price evaluation of technically approved tenderer shall be carried out as per attached price evaluation sheet. 300134100 3 no 22 supply of energy efficient brushless direct current ceiling fan as per specification with remote control and mounting hardware. technical specifications are as follows. 1. blade sweep 1400 mm ( 56 inch. ) 300131177 8 no 5 2. fan motor brushless direct current motor 3. applicable standard is 374 : 1979 4. rated voltage 230 volts + / 10%, single phase ac 5. rated frequency 50 hz + / 5% 6. rated power input 40 watt maximum 7. rated speed 270 rpm 8. power factor 0.9 minimum 9. rated air delivery 230 cubic meter per minute or better 10. rated service value 7.0 cu.m. / min / watt minimum 11. no. of blades three 12. speed cotrol 5 speed remote control 13. thd < 5% 14. bearings double ball bearings 15. other accessories standard fan mounting hardware such as down rod, rubber bush, cotter pin, bolts and locking pin etc. 16. warrenty five years 17. make crompton / bajaj / havells / atomberg / superfan or equivalent 18. colour white / brown / ivory 19. documents along with the bid copy of type test certificate as per is 374 1979 from cpri / erda / ertl or any nabl accredited for the offered ceilling fan along with the bid and at the time of supply of material. 20. vendor shall indicate actual input power comsumption and other technical details of the offered fan as per attached technical data sheet. the price evaluation of technically approved tenderer shall be carried out as per attached price evaluation sheet. 21. mandatory accesories provision of sling rope for ceiling fan as per safety requirement in external safety audit. 23 upply of flameproof and weatherproof pedestal air circulation fan with mounting stand and base , height adjustment provision, front and rear sturdy close wire guard suitable for installation in hazardous loaction zone 1 and 2. type : flamepoof as per is / iec 60079 1 : 2007. gas group : iia / iib protection : ip 55 as per is / iec 60529 2001 material : cast iron finish : light gray epoxy power painted shade 631 of is 5 temp. class : t6 rating / size / rpm : 240 v ac 50 hz, size 300 mm ( 12 ) , 900 rpm hardware : ms gi passivated cable entry : 3 / 4et, 1 no. earthing : 1 no. inside and 2 nos. outside. cimfr approved ( party shall submit copy of cimfr certificate along with the offer ) . cimfr no. shall be embossed on the name plate. name plate shall be embossed on body or engraved on ss 300142059 4 no 6 plate which shall be rivetted to main body. 24 flameproof exhaust fan as per is 2148, 300mm ( 12 ) sweep size, heavy duty alongwith blade assembly and mounting frame, having following specification: suitable for 230 volts, 50hz, 1ph ac supply, rpm 1440, degree of protection:ip 65. fan should have epoxy painting, dynamically balanced blades, double ball bearing, burst proof metallised polypropylene film capacitor of suitable rating, 1 no. double compression cable gland suitable for 3x2.5 sqmm cable. the fan shall be suitable for hazardous area, zone 1 & 2, gas group iia / iib / iic, cmrs certified. 300126986 4 no 25 flameproof wall mounting fan 1. rating : 230 volts, 50 hz 2. sweep : 18 inch 3. moc : die cast aluminium alloy lm6 suitable for zone 1 & 2, gas group iia & iib with ip65 protection 4. epoxy painted 5. cable entry: 2 nos. suitable for 3 / 4 inch et ss double compression glands. 6. moc : hardware ( non falling type ) : ss304; gasket : neoprene 7. make: baliga / cg / fcg / sudhir / flexpro / sai ex or equivalent 8. fan to be supplied with all accessories such as mounting bracket. 9. fan shall be supplied with cable entry plugged with 2 nos. of ex d iia / b cable entry stopping plugs. 10. earthing terminals to be provided inside and outside. 11. certified by cimfr and peso. both cimfr and peso no. shall be embossed on the name plate. sticker type name plate is not acceptable. name plate shall be embossed on body or engraved on ss plate which shall be rivetted to main body. 12. copy of cimfr test certificate and peso certificate shall be furnished along with the bid for the make and model offered under the bid and shall be submitted along with supply 300136619 3 no 26 plastic cable tie size 2.5mmx150 mm ( long 6 inch and width 2.5mm ) 300069551 300 no 27 nylon cable tie non releasable type for cable dressing colour natural white pack of 100 pcs size 2.5 mm ( width ) x 100 mm ( length ) 300082791 10 pac 28 nylon cable tie non releasable type for cable dressing colour natural white pack of 100 pcs size 2.5 mm ( width ) x 75 mm ( length ) 300082790 10 pac 29 nylon cable tie non releasable type for cable dressing colour natural white pack of 100 pcs 300082792 10 pac 7 size 3.6 mm ( width ) x 150 mm ( length ) 30 nylon cable tie non releasable type for cable dressing colour natural white pack of 100 pcs size 4.7 mm ( width ) x 200 mm ( length ) 300082793 10 pac 31 nylon cable tie non releasable type for cable dressing colour natural white pack of 100 pcs size 4.7 mm ( width ) x 300 mm ( length ) 300082794 10 pac 32 tape pvc self adhesive electrical insulation tape roll, width: 1.8 cm x long: 7 me x 0.125 mm thick black colour, is 7809, make: steelgrip or eq 300055495 15 no 33 tape pvc self adhesive electrical insulation tape roll, width: 1.8 cm x long: 7 me x 0.125 mm thick yellow colour, is 7809, make: steelgrip or eq 300055496 15 no 34 tape pvc self adhesive electrical insulation tape roll, width: 1.8 cm x long: 7 me x 0.125 mm thick blue colour, is 7809, make: steelgrip or eq 300055497 15 no 35 electric line tester 500 v, taparia make, model no.:813, yellow colour. 300055224 10 no 36 insulated cable lug as per following specifications ( 1 ) type: cord end terminal / bootless ferrule ( 2 ) material: tinned coated copper ( 2 ) insulation: nylon sleeve ( 3 ) wire: 1.5 mm2 ( 4 ) tube length: 10 mm 300106482 1, 000 no 37 insulated cable lug as per following specifications ( 1 ) type: cord end terminal / bootless ferrule ( 2 ) material: tinned coated copper ( 2 ) insulation: nylon sleeve ( 3 ) wire: 2.5 mm2 ( 4 ) tube length: 12 mm 300106486 1, 000 no 38 yelllow tags for tagging as per sample given with properly printing sample shall be got approved from the plant before bulk supply 300080793 1, 000 no 39 aluminium anodised and screen printed material identification tag, size 10cmx7cmx0.09mm, covered with self adesive and transparent sticker size 20cmx14cm, as ( per sample enclosed ) . 300063577 700 no 40 hand torch led rechargable life lite power supply:ac 230v 50hz built in battery: rechargable sealed lead acid 6v 4.5 ah lead.1x3w led 160 lumen bright light. operating time: 7 hrs approx. rechargaing time 16 24 hrs. operating time: 7 hrs approx. rechargaing time 16 24 hrs. 300116222 1 no 41 insulated cable lug as per following specifications ( 1 ) type: cord end terminal / bootless ferrule ( 2 ) material: tinned coated copper ( 2 ) insulation: nylon sleeve ( 3 ) wire: 0.5 mm2 ( 4 ) tube length: 10 mm 300106481 1, 000 no 8 42 insulated cable lug as per following specifications ( 1 ) type: cord end terminal / bootless ferrule ( 2 ) material: tinned coated copper ( 2 ) insulation: nylon sleeve ( 3 ) wire: 0.75 mm2 ( 4 ) tube length: 10 mm 300107979 1, 000 no 43 insulated cable lug as per following specifications ( 1 ) type: cord end terminal / bootless ferrule ( 2 ) material: tinned coated copper ( 2 ) insulation: nylon sleeve ( 3 ) wire: 1 mm2 ( 4 ) tube length: 10 mm 300107980 1, 000 no 44 self adhesive sticker of size 7 cms x 3.50 cms 300092064 500 no 45 rust loosener in aerosol spray cans wd 40 of wd 40 company make only. net weight / contents 170 gms 300128074 3 no 46 supply of 901 non flammable on line electrical contact cleaner, safe for most plastic and sensitive surface, high surface wetting with controlled evaporation, no flash point , residueless, no cfc, ozone friendly formulation, 360 degree spray action for maximum convenience of use, kb value 48, surface wetting ration2.24, surface evaporation ration 2.29, dielectric strength 36 kv, in 500ml aerosol spray container make stanvac. 300137555 4 no 47 paint remover sp 98 s4 strip it in 700 ml aerosol spray can. m / s. stanvac chemicals ( india ) ltd. vendor : m / s. tej enginee g. 300062973 4 no 48 tape ptfe size:0.07 mm. x 12.5 mm. x 12000 mm. 300063521 30 no 49 tape ptfe size:0.07 mm. x 19 mm.x 12000 mm. 300063540 30 no 50 locktite super bonder 495, 20 gm 310020807 4 no 51 plastic storage bin fpo ( front panel open ) size 500mm x 300mm x 200mm with + / 25mm tolerance in each dimension. 300058915 10 no 52 non rechargeble alkaline batteries make duracell or equivqlent size : aa battary leak proof voltage:1.5vdc capacity 2.85 ah copper top sereies. max.operating temp:54deg c 300014808 20 no 53 non rechargeble alkaline batteries make duracell or equivqlent size : aaa battary leak proof voltage:1.5vdc capacity 1000mah copper top sereies. max.operating temp:54deg c 300014800 10 no 54 switch 5 amp , make: anchor model: roma, as per latest bis standard 300108053 250 no 55 bell switch make anchor roma 5 amp, as per latest bis standard 300149987 40 no 9 56 switch 15 amp make : anchor, roma. 300108055 250 no 57 blank plate make : anchor roma. 300108057 200 no 58 pvc round plate size : big for consealed wiring 300109004 100 no 59 socket 15 amp make : anchor, roma. 300108056 100 no 60 socket 5 amp , make: anchor model: roma, as per latest bis standard 300108054 150 no 61 rechrgeable led torch with inbuilt charger and plug, 230v ac, battery capacity minimum 350mah, weight not more than 200gms, make: everady, wipro, havells or any reputed indian make 300114774 10 no 62 hydrometer thimson or equivalent make range 1100 1300, syringe ty pe 300054864 10 no 63 hand operated oil pump ( gear ) . 350000062 2 no 64 technical parameters •material type:fibre body •phase: single phase •frequency: 50 hertz •no load speed, rpm: 16000 •air volume: 3.8 m3 / min •voltage: 230 volt •full load current: 1.8 a •power consumption: 620 watt •cord material: pvc •cord length: 3 meter •duty cycle rating: continuous •variable speed: no •weight:1.8 kilogram •contents in the box: user manual •iso certification of manufacturer: iso 9001:2015 •test reports: copies of test reports / certificates and other certifications to be furnished to buyer at time of supplies: yes • make : bosch / ralliwolf / hikoki 300055771 2 no 65 crocodile clamps insulated heavy duty suitable for 50 amperes. suitable for screw type connections 300055035 25 no 66 portable hand held hot air blower. with temperature controller continuously adjustable range 50 to 600 deg. three stage air flow. with lcd display.supply voltage 230vac 50hz. make raychem / steinel 300098325 1 no 67 dynamically balanced hooter, 230 volt, 6000 rpm, hearing range 500 meters. 310011902 2 no 68 switch disconnector fuse unit, l&t make, in sheet steel enclosure, type fn32 tpn / fp. 300103743 5 no 69 switch mode power supply, acceptable makes: phoenix / omron / siemens / weidmuller / connectwell / lutze / lambda ( only ) , input: 100 to 240 vac, 50 hz, output: 24 vdc / 10 a, output voltage range: 23 to 27 vdc adjustable, efficiency: 90% or better, cooling: free air convection, mtbf: more than 4 lakh hours, approvals: ul508 310018001 3 no 1 0 listed, ul60950 1, tuv en60950 1, overload and overvontage protection: required, protection class: ip20, output led: dc ok, output contact: built in relay contact, mounting: din rail, operating temperature: 0 to 70 deg c, features required: transient surge protection and selective fuse breaking. 70 condenser of 2.5 mfd, 230 volts rating with connecting terminals out side and along with 4 long fibre glass insulatedconnecting leads. make : epcos / asian / unistar. 300014822 20 no 71 tape pvc self adhesive electrical insulation tape roll, steel grip 1.8 cm width x 8 me long x 0.125 mm thick red colour 300055494 30 no 72 tape pvc self adhesive electrical insulation tape roll, width: 1.8 cm x long: 7 me x 0.125 mm thick black colour, is 7809, make: steelgrip or eq 300055495 30 no 73 tape pvc self adhesive electrical insulation tape roll, width: 1.8 cm x long: 7 me x 0.125 mm thick yellow colour, is 7809, make: steelgrip or eq 300055496 30 no 74 tape pvc self adhesive electrical insulation tape roll, width: 1.8 cm x long: 7 me x 0.125 mm thick blue colour, is 7809, make: steelgrip or eq 300055497 30 no 75 tape pvc self adhesive electrical insulation tape roll, steel grip 1.8 cm width x 8 me long x 0.125 mm thick green colour 300055498 30 no 76 residual current circuit breaker [ rccb ] , 32a 240v , 50 hz rating, double pole, sensitivity 30milliamp, is 12640 1:iec 61008 1, rated short circuit capacity 6 ka, ambient temprature 25 c to + 55 c, electrical / mechanical operations 10000, mounting din rail ( 35 x 7.5 ) mm, degree of protection ip 20, terminal capacity 25mm2, make siemens / l and t / legrand / havells / ge / abb / schneider. 300121253 50 no 77 32 a double pole mcb suitable for lighting and other domestic loads. conforms to is 8828 : 1996 iec 60898 : 2002, 240v, 50hz, 10ka . 300083620 20 no 78 single phase, 20 amp, 240 / 415 volts ac, mcb, make:hovell / siemens / cromption / legrand ( i ) , 35mm din is 8828, isi mark. 300058201 50 no 79 63a, triple pole, legrand make, lexic type, miniature circuit breaker 300085062 10 no 80 mcb 63a capacity 10 ka, c curve 4 pole make legrand / siemens / mds / l&t 300103632 20 no 81 wooden extension board 10x 12 size, depth : 2.5 hinged door, sunmica top with a ) 3 no.20 amp, 3 pin metal clad industrial type crompton make socket, b ) 3 no.plug top suitable for above socket, c ) 3 no. 16amp 250v ac, 2 pole kaycee make switches, cat.no.srp 123.duley wired. 300117215 10 no 1 1 82 wooden extension board 8x10 size, depth : 2.5 hinged door, top with a ) 2 no.20 amp, 3 pin metal clad industrial type crompton mak e socket, b ) 2 no.plug top suitable for above socket, c ) 2 no. 16amp 2 50v ac, 2 pole kaycee make switches, cat.no.srp 123. wiring shall be d one as per enclosed diagram. 300054904 20 no 83 washer flat ss 1mm thick size m6. 300064420 400 no 84 ss304 hexagonal head bolt with nut, size: m6 x 25mm long, threads: as per class 2 6g / 6h, moc stud: a193 gr b8, nut: a 194 gr 8. with carbide solution annealing. 300099654 200 no 85 board extension size: 10x12 teak wood hingedwhite summica on t ing following components: { a } one no. 30 amp dp switch anchor make, { b } one no.15amp, 6pin switch socket combiation of anchor make { c } two nos.5 amp, 5pin switch socket combination of anchor make.dully wired 300054906 10 no 86 din mounting rail / channel with following specifications ( 1 ) width: 35 mm ( 2 ) height: 7.5 mm ( 3 ) thickness: 1 mm ( 4 ) length: 2000 mm ( 5 ) material: steel galvanized and passivated ( 6 ) perforated ( 7 ) applicable standard: bs / en / iec 60715 ( 8 ) make: phoenix / weidmuller 300112497 5 no 87 wire brush ms for cleaning with wooden handle size 2. 300063661 20 no 88 nylon cable tie non releasable type for cable dressing colour natural white pack of 100 pcs size 4.7 mm ( width ) x 200 mm ( length ) 300082793 20 pac 89 nylon cable tie non releasable type for cable dressing colour natural white pack of 100 pcs size 4.7 mm ( width ) x 300 mm ( length ) total quantity : 9986...

Due Date : November 29, 2023

Tender Value : ₹ Ref. Documents

View Tender
26
Central Railway - Maharashtra

40538674 supply of aluminium alloy conduitaluminium alloy conduit,aluminium alloy conduit (25mm dia, wall thickness 2.0mm) of threadable quality to designation 63400 of table 1 and condition t6(new) or wp(old)of table 2 of is:1285(latest) suitable for electrical wiring, marking and dimensions shall confirm to clause 6 & 7 of is 9537 latest part ii.the supply of conduit shall be in standard length of 4 meters. [ warranty period: 30 months after the date of delivery ] sse/ poh (electrical)/snpd poh, maharashtra 4000.00 metre...

Due Date : November 15, 2023

Tender Value : ₹ Ref. Documents

View Tender
28
Maharashtra State Road Transport Corporation - Maharashtra

40515249 scrap material and vehicle bodies scrap of old unserviceable ber nylon tyres size 900x20 as it is, scrap of old unserviceable ber nylon tyres size 900x20 as it is, scrap of old unserviceable ber nylon tyres size 900x20 as it is, scrap of old unserviceable ber nylon tyres size 900x20 as it is, scrap of old unserviceable ber radial tyre size 900x20 as it is, scrap of old unserviceable ber radial tyre size 900x20 as it is, scrap of old unserviceable ber radial tyre size 900x20 as it is, scrap of old unserviceable ber radial tyre size 900x20 as it is, scrap of old unserviceable ber radial tyre size 900x20 as it is, scrap of old unserviceable ber radial tyre size 900x20 as it is, scrap of old unserviceable ber radial tyre size 900x20 as it is, scrap of old unserviceable ber radial tyre size 900x20 as it is, scrap of old unserviceable ber radial tyre size 900x20 as it is, scrap of old unserviceable ber radial tyre size 900x20 as it is, scrap of old unserviceable ber radial tyre size 900x20 as it is, scrap of old unserviceable ber radial tyre size 900x20 as it is, scrap of old unserviceable ber radial tyre size 900x20 as it is, scrap of old unserviceable ber nylon buffed tyres size 900x20 as it is, scrap of old unserviceable ber radial tyre size 1000x20 as it is, scrap of old unserviceable ber radial tyre size 1000x20 as it is, scrap of old unserviceable ber radial tyre size 1000x20 as it is, scrap of old unserviceable ber radial tyre size 1000x20 as it is, scrap of old unserviceable ber radial tyre size 1000x20 as it is, scrap of old unserviceable ber radial tyre size 1000x20 as it is, scrap of old unserviceable ber radial tubeless tyre description as per catalogue., scrap of old unserviceable ber rubber tube with or without valve description as per catalogue, scrap of old unserviceable ber rubber flap of tyres as it is, scrap of old unserviceable ber pieces of tyres or tubes and flaps assorted size as it is, scrap of old unserviceable ber empty old engine oil barrel description as per catalogue, scrap of old unserviceable ber empty old grease barrel 180 kg description as per catalogue, scrap of old unserviceable ber empty paint / thinner drums description as per catalogue, scrap of old unserviceable ber empty plastic drum of paints description as per catalogue, scrap of old unserviceable cut pices of description as per catalogue, scrap of old unserviceable ber plastic pvc barrel 210 ltrs description as per catalogue, ferrous scrap of old unserviceable ber m.s consisting of bus body items such as angles description as per catalogue, scrap of old unserviceable misc rubber itemes description as per catalogue, non ferrous scrap of old unserviceable ber alluminium sheetdescription as per catalogue, ferrous scrap of old unserviceable ber ms steel spring leaves asdorted size as it is, ferrous scrap of misc auto old unserviceable ber spares such as description as per catalogue, ferrous scrap of old unserviceable ber special auto spares such as description as per catalogue, ferrous / non ferrous scrap of old unserviceable ber alluminium pistondescription as per catalogue, ferrous / non ferrous scrap of old unserviceable ber alluminium alloy description as per catalogue, ferrous scrap of old unserviceable ber cylinder liners description as per catalogue, ferrous scrap of old unserviceable ber flywheel assy with ring description as per catalogue, ferrous scrap of old unserviceable ber face plate as it is, ferrous scrap of old unserviceable ber engine assy.with crank shaft. as it is., ferrous scrap of old unserviceable ber brake drums front and rear assorted. as it is, ferrous scrap of old unserviceable ber axle shafts as it is, ferrous scrap of old unserviceable ber crown wheel with pinion as it is, ferrous scrap of old unserviceable ber all types bearing assorted size m.s. as it is, non ferrous scrap of unserviceable ber brass bushes, washer and syncro rings etc as it is, ferrous scrap of old unserviceable ber bell housings of cast iron as it is, non ferrous scrap of old unserviceable ber radiator assy with or without bracket as it is, non ferrous scrap of old unserviceable ber intercooler as it is, ferrous scrap of old unserviceable ber clutch plate leyland with hub or without hubs ms as it is, ferrous scrap of old unserviceable ber clutch plate description as per catalogue, ferrous scrap of old unserviceable ber pressure plate leyland description as per catalogue, ferrous scrap of old unserviceable ber pressure plate shivshahi as it is, ferrous scrap of old unserviceable ber pressure plate description as per catalogue, ferrous scrap of old unserviceable ber pressure plate cover description as per catalogue, ferrous scrap of old unserviceable ber back plate description as per catalogue, ferrous scrap of old unserviceable ber ms diesel tanks in assorted sizes as it is, ferrous scrap of old unserviceable ber steel propeller shafts description as per catalogue, ferrous scrap of old unserviceable ber tie rod and pull push rod with or without socket as it is, scrap of old unserviceable ber starter description as per catalogue, scrap of old unserviceable ber alternator description as per catalogue, ferrous scrap of old unserviceable ber malleable auto description as per catalogue, ferrous scrap of old unserviceable ber steering box assy. ms / cl as it is, ferrous scrap of old unserviceable ber wheel discs with or without ring description as per catalogue, non ferrous scrap of old unserviceable aluminium rivets assorted sizes as it is, non ferrous scrap of old unserviceable ber lead acid batteries description as per catalogue, non ferrous scrap of old unserviceable ber lead acid batteries shivshahi description as per catalogue, non ferrous scrap of old unserviceable ber inverter batteries description as per catalogue, non ferrous scrap of old unserviceable ber inverter batteries description as per catalogue, ferrous scrap of old unserviceable ber front and rear hub with or without description as per catalogue, ferrous scrap of old unserviceable ber auto or general electrical material description as per catalogue, scrap of old unserviceable ber old burnt oil description as per catalogue, scrap of old sludge or grease or water description as per catalogue, ferrous scrap of old unserviceable ber ms reserve tanks in various sizes as it is, scrap of old unserviceable ber plastic reserve or water tank as it is, old or obsolete or unmoved new spares description as per catalogue, scrap of old unserviceable ber machine tools such as description as per catalogue, ferrous / non ferrous scrap of old unserviceable all type of engine oil filters and diesel filters assorted size as it is, non ferrous scrap of old unserviceable ber copper wires in various description as per catalogue, ferrous / non ferrous scrap of old unserviceable ber iron dust or turning waste as it is, ferrous non ferrous old unserviceable ber alluminium and ms bus body description as per catalogue, ferrous / non ferrous scrap of old unserviceable ber conductor steel trunk as it is, ferrous / non ferrous scrap of old unserviceable ber water pump assy tata and ley as it is, scrap of old ber unserviceable stator as it is, scrap of old ber unserviceable rotor as it is, scrap of old ber unserviceable armature as it is, scrap of old ber unserviceable wiper motor as it is, scrap of old ber unserviceable main shaft, counter shaft, input shaft as it is, scrap of old ber unserviceable turbocharger body as it is...

Due Date : November 18, 2023

Tender Value : ₹ Ref. Documents

View Tender
29
Ministry Of Defence - Maharashtra

40490848 bids are invited for 1 ss screw m10 25 csk philips head drg no 100 fab nd mb 2 bolt m c hex hd thread hd 0 500 1 250 2 000 3 bolts black steel hex hd m22 70 mm with nut 4 steel bolt and nut m30 100 mm 5 mortise lock 6 lever open in left hand 6 bolt hex hd m32 100 mm long 7 rivet alluminium 3 8 1 1 2 8 nut butter fly 7 8 bsw 9 bolt brass nut nb for bolt 7 8 thrd 0 875 ht 0 750 19 mm 10 gromet eyelet c w 11 washer spring steel 3 4 n size 18 mm id 18 2mm od 23 2 mm 12 bolt unc 2a precision s steel hex hd zinc plated 1 2 2 lo 13 screw steel l hd 13 32 14 screw brass wt round hd thread 1 4 3 8 15 screw brass for csk hd 2 18g 16 bushing rubber 17 bolts black steel hex hd unmachined 3 16 bsw 1 1 4 18 pin cutter split size 6 40 mm 19 packing material asbestos 3 8 20 rivet pop alluminium alloy 187 d o 29 long shank 1 687 m u 21 packing material 1 25 4mm square 22 ss bolt 16 95 mm 23 nut h t brass 3 4 24 bolt bsw black steel hexagon head unmachined with hex nut f 25 ms bolt nut 24 110mm 26 nail steel 75mm total quantity : 11206...

Due Date : November 30, 2023

Tender Value : ₹ Ref. Documents

View Tender
30
Department Of Defence - Maharashtra

40473689 bids are invited for improvement of junction lights by maintenance, relocation / erection of high mast in kirkee cantt area. 1 supplying and erecting pvc insulated pvc round sheathed 1.5 sq.mm (30 no. x 0.25 mm dia.) 3 cores flexible multi stranded copper industrial cable for voltage grade up to 1.1 kv 650 mtr 2 supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (dwc) of hdpe for enclosing cable below ground/road surface, to required depth complete. 650 mtr 3 supplying, erecting & terminating xple armoured cable 4 core 10 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 swg) g.i. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe 700 mtr 4 supplying and erecting led flood light fitting of 150w, including lamp, with pf > 0.95,class ip 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete. crompton, philips, havells. 50 nos 5 supplying and erecting outdoor stand mounted feeder pillar for high mast of the same manufacturer with 32a tpn mcb incomer, single dial timer switch, 25a tp contactor for automatic switching of luminaries, 2 nos 9a contactors and raise/lower push button, and provision for termination of adequate size of incoming and outgoing cables erected in min. 14 swg crca sheet box with supporting angles, self lock, gasket and slanting top erected with cc foundation complete. 4 nos 6 supplying, erecting and marking spmcb 0.5a to 5a in provided distribution board 48 nos 7 supplying and erecting 12.5m (clear height) fixed type high mast (top 110mm, bottom 242 mm) with hexagonal/round bracket and foundation bolts suitable for max. 6 nos floodlight fixtures on provided foundation make bajaj transrail, valmont 8 nos 8 providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results 12 nos 9 making m 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 t/sq. m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete ( for 11m & 12.5m high octagonal gi ). total quantity : 2130...

Due Date : November 16, 2023

Tender Value : ₹ Ref. Documents

View Tender
31
Ministry Of Defence - Maharashtra

40437188 bids are invited for bolt hex hd m12 x 45 mm long (n5306 003475) (23bqec028) (q3) , ms bar black rd in 4.5 to 5 mtrs length dia 16mm (n9510 000023) (q3) , steel angle mild 40 x 40 x 3 mm (n9520 000006) (q3) , steel bar low carbon hot rolled flate 50x6mm (n9510 000066) (q3) , piping, steel, seamless, inside coated with water repellent oil (n4710 000419) (q3) , alluminium alloy pipe 20 mm id, 25 mm od (n4710 p062676) (q3) , bolt steel screwed hex hd. with nut 12 x 2 (n5306 000437) (q3) , bolts black steel hex hd m8 x 45 mm with nut (n5306 000814) (23bqec028) (q3) total quantity : 12317...

Due Date : November 21, 2023

Tender Value : ₹ Ref. Documents

View Tender
32
Directorate Of Health Services - Maharashtra

40414858 purchase of small instrument and equipment for wh, sdh and rh district nanded (under dhs grant 2023 24) , small instruments and equipments , tubectomy set set contain following items: 1) fcps artery mosquito cvd.12.5cm/5 4 no. 2) fcps artery mosquito str 12.5cm/5 4 no. 3) fcps artery sp wells cvd.15cm/6 4 no. 4) fcps artery sp wells str.15cm/6 4 no. 5) fcps allis tissue 4x5 tth 15cm/6 4 no. 6) fcps kocher(oschner) cvd 18cm/7 2 no. 7 )fcps babcock jaw 20cm/8 2 no. 8) fcps kocher(oschner) cvd 23cm/9 1 no. 9) fcps allies tissue 5x6tth 20cm/8 4 no. 10) fcps kocher(oschner) cvd 20cm/8 2 no. 11) fcps kocher(oschner) str 20cm/8 2 no. 12) fcps tonsil artery serr.birkett.str 19cm/7.5 4 no. 13) fcps artery sp wells cvd 20cm/8 4 no. 14 ) fcps artery/dsctg. roberts cvd 25cm/10 4 no. 15) fcps artery mixer rt ald cvd fine 23cm/9 2 no. 16)needle holder mayo hegar 25cm/10 2 no. 17)fcps duvals lung holding 25mmjaws 20cm/8 1 no. 18)fcps sponge big loop foerster str25cm/10 2 no. 19 ) mayo scissor str 16.5cm/6.5 2 no. 20) clamp, bronches lees traunil 40mm 90aof jaws 23cm/9 1 no. 21) bladder neck spreader.khonsari 24cm/9 1 no. 22 ) cannula,suction yankauer cp.27cm 1 no. 23)retractor lung alllison 22cmd/7.0 cmw.32/12.5 1 no. 24)fcps. dsctg. 3mm serr. tips. sus 20cm/8 2 no. 25)fcps. dsctg. sus 3mm 1x2 tth 15cm/8 2 no. 26 ) fcps. dsctg. 3mm serr. tips. sus 15cm/6 2 no. 27)fcps. dsctg. 3mm serr. tips. sus 12.5cm/5 2 no. 28)fcps towel backhaus 8cm/3.25 02 no. 29)scalpel/b.p.handle 14cm no3 2 no. 30)retractor adson 4x4prong 20mm x20mm sp/bl.hinged arms 26cm/10 2 no. 31) retractor langenbeck 12mmwx35mmd.21cm/8.25 2 no. 32 fcps.dsctg.sup 3mm 1x2tth.15cm/6 2 no. 33 fcps.dsctg sup.1x2 tth 12.5 cm/5 2 no. , nsv set for vasectomy set contain following item: 1)vas fixation ring forceps 2 no. 2 ) artery forceps 4”st. 4no. 3 ) vas dissecting forceps 4 no. 4 ) sponge holding forceps 25cm 2 no. 5)towel clip 4 no. 6)ss instrument tray with lid 8 x 6 2 no. , caesarean section set set contain following item: 1) sponge holding forceps 10 2 no. 2) bp handle no 4 2 no. 3 )toothed dissecting forceps 5 2 no. 4)non toothed dissecting forceps 5 1/2 2 no. 5)curved artery forceps 6 1/2 6 no. 6)curved artery forceps 9 2 no. 7)straight artery forceps 6 6 no. 8)straight artery forceps 9 2 no. 9)allie’s tissue forceps 6 6 no. 10 ) green armitage forceps 1 pair 11 )needle holder 8 1 no. 12 ) needle holder 10 1 no. 13) morris retractor3 3/4 1 no. 14)deaver caesarean retractor medium 1 no. 15 ) deaver caesarean retractor narrow 1 no. 16)langen beck retractor medium 1 no. 17)bowl (small size) 6 2 no. 18)kidney tray 8 1 no. 19)mucus sucker 1 no. 20)suction tube/catheter 1 no. 21 ) s.s bowls 10 2 no. 22)vaginal speculum : large 1,small 1 & medium 1no. 23)obstetric forceps 2 pairs 8 1 24)curved dissecting scissors 8 1 no. 25)short dissecting scissors 6 1 no. 26) straightdissecting scissors 8 1 no. 27)stich scissors 1 no. 28)babcock tissue forceps 6 2 no. 29 )malleable copper retractors 3 1 no. 30)occlusion clamps straight 4 no. 31)occlusion clamps curved 4 no. 32)crushing clamps large 1 no. , b.p. appratus digital , b. p. appratus(mercury) , dressing drum ss 6 x 6 isi , dressing drum ss 9x9 isi , dressing drum ss 11x9 isi , dressing drum ss 12x15 isi , hot air oven , incubetor , nebulizer adult , oxygen regulator with humidifier bottle + key compete set , proctoscope adults.s. , stainless steeltraywithcover12 inch x 12inch , stainless steeltraywithcover8inch x 6 inch , stainless steeltraywithcover12 inch x 10 inch , stainless steeltraywithcover18 inch x 13inch , stethoscope ( adult) : high acoustic sensitivity,dual sided,aluminium alloy anodized 45 mm chest piece,imported diaphragm,head frame 175mm of 5 mm thick brass pipe,21 non greasy superior tube , extra soft tight sealing ear piece, name tag with high visibility , spare diaphragm with ear knob , tonguedepressorinch s inchshapes.s. , tonguedepressorinch l inchshape s.s. , water bath...

Due Date : November 06, 2023

Tender Value : ₹ 21.20 Lakhs

View Tender
33
Military Engineer Services - Maharashtra

40410452 tender for work services for improvement of omqs at af station pune ( 83254 / e8 ) ; 1 dismantling stone slabs and tiles of any description or thickness in floors, aprons etc. laid in any type of mortar complete all as specified and directed. 2 material and labour for cement concrete type b0 1:2:4 ( using 12.5 mm graded stone aggregate ) , 25 mm thick as in sub floors complete all as specified and directed. 3 material and labour for screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in cement mortar 1:6 complete all as specified and directed. 4 material and labour for vitrified ceramic tiles, 10 mm thick, coloured, dark shade ( square / rectangular ) , polished, area of each tiles exceeding 18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. 5 material and labour for non skid coloured ceramic tiles 7 to 8 mm thick ( square / rectangular ) , area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors and of superior / premium quality, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed. 6 dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing ) , removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. 7 material and labour for non skid ceramic coloured tiles, 7 to 8 mm thick ( square / rectangular ) , area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 15 mm thick screed bed in cement mortar ( 1:6 ) complete all as specified and directed. 8 material and labour for glazed ceramic coloured tiles, 450mm x 300mm or 300mm x 600mm size and 7mm thick, set on vertical surfaces such as skirting, dado, etc. over and including 10 mm thick rendering in cement mortar 1:3 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles, complete all as specified and directed. 9 material and labour for machine cut kota stone slab flooring 20 25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including screed bed 20 mm thick in cement mortar 1:4 complete all as specified and directed. 10 material and labour for kota stone slab 20 25 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with over 10 mm thick plaster in cement mortar 1:3 complete all as specified and directed. 11 material and labour for granite 20 mm thick ( of any type ) work ( table rubbed and polished ) in steps, jambs, pillars, window cills, cooking platform and like in cement mortar ( 1:4 ) including pointing in white cement ( 1:2 ) using marble dust with admixture of pigment to match with shade complete all as specified and directed. 12 material and labour for machine cut cudappah stone slab 20 25 mm thick over 10 mm thick plaster of cement mortar 1:3 in wall and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. 13 demolition of cement concrete ( un reinforced ) in ground floors and pavings not exceeding 15 cm thickness ( below or above ground level ) complete all as specified and directed. 14 material and labour for 100 mm thick cement concrete, type b 2, 1:2:4 ( using 20 mm graded stone aggregate ) , as in floors, sub floors, sub base and pavings etc. and finishing the cement concrete surfaces even and smooth without using extra cement complete all as specified and directed. 15 material and labour for 75 mm thick pcc, 1:3:6, type c 2 ( using 40 mm graded stone aggregate as in sub base of floor and path, plinth protection etc. complete all as specified and directed. 16 material and labour for forming contraction ( dummy ) joints 75 mm deep x 10 mm wide for plinth protection and similar work, filled with sealing compound grade a complete all as specified and directed. 17 dismantling of wall and ceiling boards ( fibre, pulp, insulation, etc. ) or insulation boards / slabs / blankets, any thickness, including cover fillets complete all as specified and directed. 18 material and labour for suspended false ceiling using anodized aluminum snap grid frame work iincluding hanger 6mm dia gi ( upto 1200mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of gi flat 40x3mm size, 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete including perforated particle board / tiles for insulation and acoustic purposes, 60 x 60 cm size, fixed on snap grid 12 mm thick confirming to is 2095, 2995 part i fixed with 25 mm dry wall screws @ 230 mm c / c with screw driver to match surface attachment, board joined and finished to have a flush look using jointing compound / tape as per manufacturer instructions with designing as per directions in two steps complete all as specified and directed. 19 removal of existing tarfelt treatment / stone slab from rcc roof slab / terrace / chajjas etc. and cleaning of all foreign material such as fungus, mass etc. by means of ms scrappers or any other suitable tools complete all as specified and directed and removing debris to a distance exceeding 1.5 km but not exceeding 5 km from the starting points and deposited where as directed by engr in charge. 20 material and labour for app based polymeric membrane weighing minimum 3kg / sqm and minimum 3mm thick, reinforced with polyster non woven fabric ( weight of reinforcement not less than 150 gms / sqm ) laid on primed surfaces by forced application including preparation and applying two coats of heat resisting paint over app membrane complete all as specified and directed. 21 supply only liquid water proofing compound complete all as specified and directed. 22 material and labour for pcc, type b0 1:2:4, 25 mm thick using 12.5 mm graded stone aggregate as in padding of roof surfaces finished even and fair without using extra cement complete all as specified and directed. 23 taking down shutters of any description exceeding 1 sqm and not exceeding 2 sqm each complete all as specified and directed. 24 material and labour for 18 mm thick plywood bwr grade type bb fixed with fevicol and nails for working table / storage almirah to the size and pattern as shown in drawing complete all as specified and directed by engnr in charge. 25 material and labour for 6 mm thick plywood bwr grade type bb fixed with fevicol and nails for working table / storage almirah to the size and pattern as shown in drawing complete all as specified and directed by engnr in charge. 26 material and labour for 0.90 mm thick decorative laminate type i of surface finish ( colour and pattern as approved ) fixed with approved adhesive as per manufacturer’s instruction finished to approved size for working table complete all as specified and directed. 27 material and labour for 2nd class hard wood plain cover fillets square, rectangular or triangular in section bull nosed, splayed, chamfered or rounded on one edge or face in 2nd class h.w., sectional area not exceeding 6 sqcm complete all as specified and directed. 28 material and labour for 2nd class hard wood plain cover fillets square, rectangular or triangular in section bull nosed, splayed chamfered or rounded on one edge or face in 2nd class h.w., sectional area exceeding 6 sqcm and not exceeding 13 sqcm complete all as specified and directed. 29 supply and fix brass hinges 75 mm size extruded with mild steel pin, type d 11 complete all as specified and directed. 30 supply and fix brass handles extruded fabricated type, 100 mm size complete all as specified and directed. 31 supply and fix 100 mm long brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed. 32 supply and fix 100 mm size of hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. 33 taking down chowkat with shutter ( without taking out shutter from the frame ) not exceeding 1.5 sqm each complete all as specified and directed. 34 taking down chowkat with shutter ( without taking out shutter from the frame ) exceeding 1.5 sqm and not exceeding 4 sqm each complete all as specified and directed. 35 taking down shutters of any description not exceeding 1 sqm each complete all as specified and directed. 36 supply and fix solid pvc door frame of size 50mm x 47mm, made out of 5 mm thick plain colour pvc sheet, reinforced with mild steel square tube complete all as specified and directed. 37 supply and fix factory made solid panel pvc moulded door shutter, 28 to 30mm thick ( stiles ) , with 2, 4 or 6 raised panel design with 2mm thick moulded prelaminated pvc sheet on the front face and 2mm prelaminated colour pvc sheet on back face, fixed in frame at site as per specification and drawing including fittings complete all as specified and directed. 38 supply and fix aluminium anodied powder coated frame ( miniumum thickness of powder coating 50 micron ) for doors, windows, ventilator with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. 39 supply and fix powder coated aluminium ( minimum thickness of powder coating 50 micron ) for shutters of doors, windows and ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of epdm rubber / neoprene gasket required ( fittings shall be paid for separately ) with extruded built up standard tubular sections / appropriate z sections and other sections of approved make conforming to is: 733 and is:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required epdm rubber / neoprene gasket etc., aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, c.p. brass / stainless steel screws all as per the directions of engineer in charge, for sliding window shutters complete all as specified and directed. 40 supply and fix 4.8 mm thick sheet glass, ordinary quality and glazing with oil putty in square exceeding 0.5 sqm in each pane complete all as specified and directed. 41 supply and fix steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed. 42 supply and fix steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed. 43 supply and fix second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed. 44 supply and fix 35 mm thick second class hardwood glazed and skeleton shutters divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers and prepared to receive glass, gauze, etc., edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauze, etc. complete all as specified and directed. 45 supply and fix 30 mm thick flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. 46 supply and fix 165 x 60 mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed. 47 supply and fix 100 mm size butt hinges, medium weight, cold rolled brass complete all as specified and directed. 48 supply and fix 150 mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed. 49 supply and fix 150 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. 50 supply and fix 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple ( bolt type ) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed. 51 supply and fix 3.0 mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 sqm in each pane complete all as specified and directed. 52 supply and fix in repair mild steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. 53 taking up or down steel tubing and connections of 15 mm dia, including cleaning for re fixing or removal complete all as specified and directed. 54 taking up or down steel tubing and connections of 20 mm dia, including cleaning for re fixing or removal complete all as specified and directed. 55 taking up or down steel tubing and connections of 25mm dia, including cleaning for re fixing or removal complete all as specified and directed. 56 supply and fix gi tubing 15 mm dia medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed. 57 fixing only 15 mm dia tubes, any grade, to walls and ceilings or laying in floors complete all as specified and directed. 58 supply and fix gi tubing 20 mm dia medium grade with all fittings and fixtures complete laid in trenches fixed complete all as specified and directed. 59 fixing only 20 mm dia tubes, any grade, to walls and ceilings or laying in floors complete all as specified and directed. 60 supply and fix for gi tubing 25mm dia medium grade with all fittings and fixtures complete laid in trenches fixed complete all as specified and directed. 61 fixing only 25mm dia tubes, any grade, to walls and ceilings or laying in floors complete all as specified and directed. 62 material and labour for cutting chases, pinning in making good to face for concealed water tubing in stone / concrete blocks or slab walls complete all as specified and directed. 63 dismantling water tank exceeding 500 litres and not exceeding 1000 litres andcomplete all as specified and directed. 64 dismantling water tank exceeding 250 litres and not exceeding 500 litres andcomplete all as specified and directed. 65 supply and fix universal type, three layers, white colour rotational moulded polyethylene water storage tank of 1000 litre capacity, isi marked ( cylindrical, vertical with closed top ) hoisted and fixed in position all as specified in ssr pt i with 25 mm ptmt ball valve high pressure with rod and high density plastic ball complete all as specified and directed. 66 supply and fix universal type, three layers, white colour rotational moulded polyethylene water storage tank of 500 litre capacity, isi marked ( cylindrical, vertical with closed top ) hoisted and fixed in position all as specified in ssr pt i with 25 mm ptmt ball valve high pressure with rod and high density plastic ball complete all as specified and directed. 67 supply and fix in repair vitreous china wash down water closet pan ( pedestal pattern ) , white ( excluding fixing bolts, flushing cistern and flush pipe ) , pedestal pan and trap including connection to drain ( or outgoing pipe ) and to flushing pipe, antisyphonage pipe etc. complete, plastic water closet seat, black closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. 68 supply and fix in repair vitreous china, squatting pan of orissa pattern, long pan, size 580 mm x 440 mm, white, with p of s trap, front or back inlet and foot rests any pattern, including concrete bedding and pvc low level flushing cistern 10 ltr capacity including 32mm pvc flush pipe, all internal fittings, inlet, outlet pipe connections etc. complete all as specified and directed. 69 supply and fix vitreous china wash basin ( oval type ) , white, flat back, size 550 x 450 mm including waste pipe, chain and plug and porcelain stopper and including brackets, 450mm pvc connection with brass screws, waste coupling of 32 mm diacomplete all as specified and directed. 70 supply and fix in repair 10 litre pvc low level flushing system plastic valve with inlet ball valve float including brackets, flush pipes to pedestal pan, including all joints, fixed in repair complete all as specified and directed. 71 supply and fix 600 mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick ac building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. 72 supply and fix in repair 15 mm dia cp brass pvc connection 45 cm long including check nuts etc. complete all as specified and directed 73 supply and fix in repair 15 mm dia cp pillar cock, cast copper alloy complete all as specified and directed. make: model no. fus 29001 of jaquar or equivalent. 74 supply and fix in repair 15 mm bore bib tap chromium plated, cast copper alloy with wall flange complete all as specified and directed.make: model no. fus 29037 of jaquar or equivalent. 75 supply and fix in repair angular stop cock with flange, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.make: model no. fus 29053 of jaquar or equivalent. 76 supply and fix toilet paper holder with flat recessed type stainless steel complete all as specified and directed.make: model no. can 1153s of jaquar or equivalent. 77 supply and fix two way bib cock with wall flange 15 mm dia complete all as specified and directed.make: model no. fus 29041 of jaquar or equivalent. 78 supply and fix wall mixer 3 in 1 system with provision for both hand shower and over head shower complete with 115 mm long bend pipe, connecting legs and wall flange ( wihtout hand and over head shower ) complete all as specified and directed.make: model no. fus 29281 of jaquar or equivalent. 79 supply and fix corner glass shelf with brackets complete all as specified and directed.make: model no. can 1173 of jaquar or equivalent. 80 supply and fix round 150 mm dia shower complete all as specified and directed.make: model no. ohs 1603 of jaquar or equivalent. 81 supply and fix soap dish holder complete all as specified and directed.make: model no. can 1131n of jaquar or equivalent 82 supply and fix in repair brass chromium plated tubular towel rail, 20mm dia, d type, 60cm long between flanges complete all as specified and directed. 83 supply and fix health faucet ( abs body ) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and abs wall hook including making connections and fixed in position complete all as specified and directed. 84 supply and fix in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm and bowl size 410mm x 330mm x 160mm complete all as specified and directed. 85 supply and fix sink cock with regular swinging spout ( wall mounted model ) with wall flange complete all as specified and directed.make: model no. ari 39347s of jaquar or equivalent. 86 supply and fix in repair 75mm dia pvc ( swr ) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. 87 supply and fix stainless steel fancy type curtain rod 20 mm bore including two sides brackets complete all as specified and directed. 88 demolition and breaking up drain pipes ( salt glazed ware / pvc / ac or reinforced concrete ) of 100 mm dia, set in cement mortar complete all as specified and directed. 89 supply and fix 75 mm bore pvc ( swr ) pipes single socketed in any length with rubber ring joints fixed to walls or in trenches or in floor complete all as specified and directed. 90 supply and fix 100 mm bore pvc ( swr ) pipes single socketed in any length with rubber ring joints fixed to walls or in trenches or in floor complete all as specified and directed. 91 supply and fix pvc ( swr ) bends 75mm dia with oval access door complete all as specified and directed. 92 supply and fix pvc ( swr ) bends 100mm dia with oval access door complete all as specified and directed. 93 supply and fix pvc ( swr ) cowls of 75 mm dia complete all as specified and directed. 94 supply and fixpvc ( swr ) reducers 75 mm dia complete all as specified and directed. 95 supply and fix 110 mm pvc ( swr ) junction single ( single t ) equal or unequalwith access door complete all as specified and directed. 96 supply and fix 75 mm pvc ( swr ) junction single ( single t ) equal or unequalwith access door complete all as specified and directed. 97 dismantling single layer mangalore pattern tiles or similar tiles in roofing complete all as specified and directed. 98 dismantling battens exceeding 15 cm for tiles any size including tilting fillets complete all as specified and directed. 99 dismantling plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar pattern roof coverings complete all as specified and directed. 100 dismantling timber in fillets rails, posts, rafters, purlins etc. over 40 sqcm in section in unframed work complete all as specified and directed. 101 supply and fix pre painted galvalume aluminum zinc coating gi based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed. 102 supply and fix pre painted galvalume aluminum zinc coating gi based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering / cladding to wall / eaves boards, fixed with self tapping screws complete all as specified and directed. 103 supply and fix 0.63 mm thick plain, galvanised mild steel sheeting in ridges, hips, valley gutters, drip and straight flashing ( length and girth as fixed ) with grade of zinc coating 275 complete all as specified and directed. 104 supply and fix rolled mild steel roof trusses ( framed ) , trussed, purlins , rails and fastenings etc., confirming to fe 410 s including distance pieces, cleats, etc., complete all as specified and directed. 105 supply and fix framed work such as grills, gratings, etc. with ends of barsshouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to fe.290 gde e 165 as specified for window grills complete all as specified and directed. 106 supply and fix framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rails and guides ) and hanging; also fastening and fixing as specified for eaves board fixing complete all as specified and directed. 107 supply and fix plates ( plain or chequered ) channels, square cut or notched ( ordinary and counter sunk ) forming holes, without any attachment fe 410 w ( gde e 250 quality a ) complete all as specified and directed. 108 supply and fix 1.25 mm thick plain, black, mild steel sheeting in ridges, hips, valley gutters, drip and straight flashing ( length and girth as fixed ) for steel door with welded or soldered joints complete all as specified and directed. 109 supply and fix in repair collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and directed. 110 supply and fixing stainless steel kitchen cup / saucer / kitchen utensils holder basket, corrosion resistant, seamless, glossy finish, nickel chrome plated using 5 mm dia wire / ss perforated sheet assembled and fabricated in required size and finish complete all as specified and directed. 111 supply and fix telescopic drawer channel of stainless steel zinc finish ( silver colour ) of weight capacity minimum 35 kgs including necessary fixing arrangements, hinges and ss screws complete all as specified and directed. 112 supply and fix soild handle of stainless steel chromium plated 200 mm long “d” shape including necessary fixing arrangements, hinges and screws complete all as specified and directed. 113 supply and fix ball catches with 8 mm dia steel ball and brass body and striking plate including letting in and necessary fixing arrangements, hinges and ss screws complete all as specified and directed. 114 supply and fix 18 mm thick machine pressed veneered decorative plywood grade i ( with bwr resin ) with decorative face veneers on one side and other side balancing with white laminationassembled as in drawers / cupboards moulded as requiredincluding necessary fixing arrangements complete all as specified and directed. 115 taking down cement plaster on brick / stone wall etc., including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed. 116 material and labour 15 mm thick rendering on surfaces of brick work / concrete surfaces in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and directed. 117 material and labour for 10 mm thick rendering onfair faces of brick work / concrete surfaces finished even and smooth without using extra cement in cement mortar 1:4 complete all as specified and as directed 118 material and labour for 5 mm thick ceiling cement plaster in cement mortar 1:4 on fair faces of brick or concrete surfaces and finishing the surface even and smooth without using extra cement complete all as specified and directed. 119 material and labour for keyed pointing to random or polygonal rubble, uncoursed or brought upto course in cement mortar 1:4 complete all as specified and directed. 120 demolition of brickwork or stone / boulder masonry / pcc block masonry, built in cement mortar complete all as specified and directed. 121 material and labour for precast solid cement concrete block masonry exceeding10 cm in width built with solid blocks type c1 ( 1:3:6 mix ) with 20mm graded stone aggregate and set in cement mortar ( 1:6 ) complete all as specified and directed. 122 material and labour for walling of random rubble, uncoursed, well bonded, beddedand solidly hearted built in cement mortar 1:4 complete all as specified and directed. 123 material and labour for walling of random rubble ( except stones ) , uncoursed, well bonded, beddedand solidly hearted built in cement mortar 1:4 complete all as specified and directed complete all as specified and directed. 124 material and labour for pcc 1:3:6 type c2 ( using 40 mm graded stone aggregate ) as in surface channels and drains complete all as specified and directed. 125 material and labour for pcc type d 2 ( 1:4:8 ) using 40mm graded crushed stone aggregate as in mass concrete and filling of foundation complete all as specified and directed. 126 material and labour for pcc type b1 1:2:4 ( using 20 mm graded stone aggregate ) for in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed. 127 material and labour for preparation of old painted wooden surfaces of any description having width / girth exceeding 10 cm and applying one coat of synthetic enamel paint complete all as specified and directed. 128 material and labour for preparation of new wooden surfaces of any description having width / girth exceeding 10 cm and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. 129 material and labour for complete removal of existing treatment on walls complete all as specified and directed. 130 material and labour for 1 mm thick wall care putty on wall complete all as specified and directed. 131 material and labour for distempering with two or more coats on new work with 1st quality acrylic distemper ( ready mixed ) having voc content less than 50 gms / litre of approved manufacturer and of required shade and colour complete as per munufacuter specification complete all as specified and directed. 132 material and labour for applying two or more coats of 100% premium acrylic emulsion paint having voc less than than 50gm / litre and uv resistance as per is 15489:2004, alkali and fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 1.43 litre / 10 sqm over and including priming coat of exterior primer applied @ 0.9 litre / 10 sqm over new surfaces / old surfaces of wall complete all as specified and directed. 133 material and labour for preparation of old plastered surfaces / unplastered surfaces including brooming down with steel wire brushing scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying two coats of white washing on old plastered surfaces of walls complete all as specified and directed. 134 material and labour for preparation of old plastered / unplastered ceiling / soffit of slabs / chajja surfaces including brooming down with steel wire brushing scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying two coats of white washing on old plastered surfaces of walls complete all as specified and directed. 135 material and labour for preparation of old painted steel / iron surfaces of any description having width / girth exceeding 10cm and applying one coat of synthetic enamel paint complete all as specified and directed. 136 material and labour for preparation of new steel / iron surfaces of any description having width / girth exceeding 10cm and applying two coats of synthetic enamel paintover red oxide primer complete all as specified and directed. 137 supply and fix stack clamps made out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof ( 75mm dia ) complete all as specified and directed. 138 supply and fix stack clamps made out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof ( 100mm dia ) complete all as specified and directed. 139 demolition of concrete of any description and in any position not otherwise specifically provided for sunken treatment complete all as specified and directed. 140 material and labour for 75 mm thick pcc in ( 1:2:4 ) type b2 using 40 mm graded stone aggregate as in sunken floor complete all as specified and directed. 141 material and labourfor pcc 1:5:10 type e2 using 40mm graded aggregate as in foundations, filling and mass concrete complete all as specified and directed. 142 material and labour for pcc 1:1½:3 or bitumastic gola with 80 / 25 bitumen and coarse sand mixture 1:3 by weight 8cm x 8cm at the junction of roofing to vertical surface as in sunken or similar work complete all as specified and directed. 143 material and labour for bitumen blown any grade applied hot, in two coats to concrete bedding surface @ 1.5kg / sqm ( vg 10 grade ) per coat as in sunken floor complete all as specified and directed. 144 material and labour for polythene film black, 50 micron laid in sunken floor complete all as specified and directed. 145 material and labour for spout of 50 mm bore pvc pipe and projection 450 mm clear from outer wall in any length or description with rubber ring joints and fixed in sunken floor etc. for drain out logging as in sunken floor etc. or similar work complete all as specified and directed. 146 material and labour for 25 mm thick pcc 1:2:4 type b 0 using 12.5 mm graded stone aggregate as in sunken floor mixed with water proofing compound and finished fair and even complete all as specified and directed.note: wpc shall be measured and paid separately 147 surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in hard / dense soil complete all as specified and as directed. 148 material and labour for 100 mm thick cement concrete type d2 1:4:8 ( using 40 mm graded stone aggregate ) complete all as specified and directed. 149 material and labour for 50 mm thick sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed. 150 material and labour for machine pressed precast conctete interlocking paver block any shape and size conforming to is 15658 2006, of 60 mm thickness, m 35 grade with grey cement and no pigment complete all as specified and as directed. 151 excavating in trenches, not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth, for foundation, laying of pipe / cable etc. or for shaft, walls, cesspits, manholes, pier etc. not exceeding 10 sqm on plan andand getting out in soft / loose soil complete all as specified and directed. 152 material and labour for 100 mm dia salt glazed stoneware drain pipes laid in trenches and jointed complete all as specified and directed. 153 material and labour for 150 mm dia reinforced concrete pipes, class np2, laid and jointed complete with collars complete all as specified and directed. 154 material and labour for pcc ( 1:3:6 ) type c2 concrete bed to drain pipes of dia 100 mm dia including packing under and haunching against the sides of pipes after they laid and tested as required as per ground condition complete all as specified and directed. 155 material and labour for pcc ( 1:3:6 ) type c2 concrete bed to drain pipes of dia 150 mm dia including packing under and haunching against the sides of pipes after they laid and tested as required as per ground condition complete all as specified and directed. 156 returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in any strata complete all as specified and as directed. 157 removing excavated soil / material to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above starting point complete all as specified and as directed. 158 material and labour for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel ( 1 / 2 round or 3 / 4 section ) in cement concrete 1:2:4 type b1, smooth finished, and reforming benching as required for 150 mm dia pipe complete all as specified and directed.note: work in foul condition 159 material and labour for providing precast cement concrete type b1, 1:2:4 ( using 20mm graded sone aggregate ) in landings, cover slabs for manholes etc., chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faceand set in cement mortar 1:4 complete all as specified and directed. 160 material and labour for mild steel tmt bars 10 mm dia and over, cut to length, bent to shape as required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire ( annealed ) not less than 0.9 mm dia complete all as specified and as directed. 161 demolition of cement concrete ( reinforced ) in any description and in any position not otherwise specifically provided for complete all as specified and directed 162 taking down the existing surface batten type point wiring of aluminium for light, fan, sockets, power sockets, stair case light point etc. complete with switch, socket, regulator, bracket fitting etc. and making good disturbed surfaces for wall, floors etc. as directed by engr in charge including sorting out serviceable and unserviceable light fittings and keeping serviceable fitting in safe guard for reuse as required on site complete all as specified and as directed. 163 taking down sub main wiring of any dia / sqmm on teak wood batten / pvc conduit or gi earth wire complete all as specified and as directed. 164 taking down cearfully by unscrewing the unserviceable db boxes, mcb distribution boards sp and tpn with porcelain cutouts etc. complete all as specified and as directed. 165 material and labour for providing point wiring complete with two runs of 1.5 sqmm single core multistranded copper conductor frls pvc insulated cable 1100 volts grade and with one run of 1.5 sqmm single core multistranded copper conductor frls pvc insulated cable 1100 volts grade wire for continuous earthing in and including pvc casing and capping with all fittings / fixtures etc. complete all as specified and directed for one light point controlled by one, one way switch.note: pvc switch box, cover plate and frame shall be measured and paid separately. 166 all as per item no.165 above but for one light point controlled by two, two way switches complete all as specified and directed. 167 all as per item no.165 above but for one bell point controlled by one, one way switch complete all as specified and directed. 168 all as per item no.165 above but for one exhaust fan / wall mounted fan / ceiling fan point controlled by one regulator / switch complete all as specified and directed. 169 all as per item no.165 above but for one 3 pin 5 amps socket outlet on independent board complete all as specified and directed. 170 all as per item no.165 above but for one 3 pin 5 amps socket outlet on same board complete all as specified and directed. 171 material and labour for providing point wiring complete with two runs of 2.5 sqmm single core multistranded copper conductor frls pvc insulated cable 1100 volts grade and with one run of 1.5 sqmm single core multistranded copper conductor frls pvc insulated cable 1100 volts grade wire for continuous earthing in and including pvc casing and capping, isi marked with all fittings / fixtures etc. complete for housing one 15 amp switch / socket complete all as specified and directed.note: pvc switch box, cover plate and frame shall be measured and paid separately. 172 material and labour for providing point wiring complete with two runs of 4 sqmm single core multistranded copper conductor frls pvc insulated cable 1100 volts grade and with one run of 1.5 sqmm single core multistranded copper conductor frls pvc insulated cable 1100 volts grade wire for continuous earthing in and including pvc casing and capping, isi marked with all fittings / fixtures etc. complete for housing one 15 amp switch / socket complete all as specified and directed.note: pvc switch box, cover plate and frame shall be measured and paid separately. 173 material and labour for sub main wiring using two runs of 6 sqmm cable and one run of 4 sqmm earth wire with single core frls pvc insulated multistranded copper conductor 1100 volts grade, isi marked complete with pvc casing and capping and accessories like bends, tees etc. complete all as specified and as directed.note: one run of phase wire, one run of neutral wire and one run of earth wire with one run of pvc casing and capping shall be measured and paid as one unit length. 174 supply and fix sheet metal enclosure with socket plug top, single pole and neutral enclosure with two pin earth plug and socket with one mcb sp of capacity 20 amps including fixing concealed in wall and making good disturbed surfaces complete all as specified and directed. 175 supply and fix vertical double door distribution board tp 4 way with 125 amp rated busbar consisting of one mccb 63 amp 18 ka including fixing on wall surface and making good the disturbed surface making all necessary incoming and outgoing connections using proper size copper thimbles all as required on site complete all as specified and directed. 176 supply and fix sheet metal enclosure with mcb db double door spn 16 way 230 v with neutral link and with 200 amp busbar including making necessary arrangement to fix db concealed in wall including cutting chasing in stone masonry / brick masonry and making good the disturbed surface making all necessary incoming and outgoing connections using proper size copper thimbles all as required on site complete all as specified and directed. 177 supply and fix sheet metal enclosure with mcb db double door spn 8 way 230 v with neutral link and with 200 amp busbar including making necessary arrangement to fix db concealed in wall including cutting chasing in stone masonry / brick masonry and making good the disturbed surface making all necessary incoming and outgoing connections using proper size copper thimbles all as required on site complete all as specified and directed. 178 supply and fix mcb spn 40 63 amp, 10 ka, 240 volt, c curve and electric connectins with copper thimble complete all as specified and directed. 179 supply and fix mcb sp, 240 volt, 6 32 amp, c series complete all as specified and directed. 180 supply and fix modular switch, one way, 1 module, 240 volts, 6 amps ( isi marked ) complete all as specified and directed. 181 supply and fix modular socket outlet, 2 / 3 pin, combined 2 module, 6 amps complete all as specified and directed. 182 supply and fix modular switch one way, 16 amps, 1 module complete all as specified and as directed.complete all as specified and directed. 183 supply and fix modular socket 6 amp / 16 amp, 2 / 3 pin combined 2 module complete all as specified and as directed. 184 supply and fix ceiling rose surface type bakelite / pvc three terminal, 65 x 50 mm, isi marked complete all as specified and as directed. 185 supply and fix modular bell push, 6 amps, 1 module complete all as specified and directed. 186 supply and fix bell electric 230 volt, single pole complete all as specified and directed. 187 supply and fix modular fan step regulator, 120 w, 2 module complete all as specified and directed. 188 supply and fix modular switch, two way, 1 module, 6 amps ( isi marked ) complete all as specified and directed. 189 supply and fix led light fitting mirror type with high output diffuser 2 feet, 10 watt, 220 v ac decorative type with driver holder and led lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. 190 supply and fix high quality indoor surface and wall mounted led batten 22 w, provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver complete with all accessories internally pre wired and including connecting up with three core 0.5 sqmm flexible copper conductor cable ceiling rose to fitting terminal complete all as specified and directed. 191 supply and fix angle / batten holder insulated body with back plate for batten fittings complete all as specified and directed. 192 disconneting and taking down ceiling fan of 1200 mm sweep / exhaust fan of 300 mm sweep for servicing, strip opening of fan including servicing and greasing complete at site and re assembling and refixing to the same / other location after replacing rubber reel, fixing bolts and nuts with lock pins, connectors for complete fan including writing mes no. and testing complete after servicing and fixing for smooth and noise free operation all as required and directed by engineer in charge complete all as specified and directed. 193 taking down the existing street light fitting and supply and fix energy saving and environmental friendly lonf life led street light fitting 35 watt 230 v ac outdoor type with high pressure die cast aluminium hosing and heat resistance, impact and corrosion resistance including thermal management in multiple optics, ip 65 / 66 roadway luminaries with leds as light source and lens embedded pc cover / toughened glass and impact resistance of ik07 and electronic driver fixed on pole / wall with and including suitable dia size bracket as per manufacturer recommendation complete with ms flat iron clamps ( clamp shall be 40x5 mm ms flat ) , nuts, bolts and washers including painting the clamps with a coat of aluminium paint over a coat of red oxide primer including connection complete all as specified and directed. 194 supply and fix led lamp 9 watt 230 volts complete all as specified and directed. 195 material and labour for earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm as earthing lead buried directly in ground vertically in a pit of depth not less than 2.25 metre below ground level with the top edge of earth plate at a depth not less than 1.5 m below normal ground level, connected to and including galvanised iron earth lead wire 4 mm dia as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel, and connected to earthing test point, providing charcoal and common salt all as shown in electrical plate no. 3 of ssr part i, and testing on completion including excavation and earth work in any type of soil, pcc 1:3:6 type c1 earthing chamber, precast slab 50 mm thick in cement concrete 1:2:4 type b1 reinforced with welded steel wire fabric ( xpm ) weight not less than 4kg / sqm, funnel with wire mesh, watering pipe of 20 mm bore medium grade gi pipe and lugs, earthing wire protected by galvanised iron or steel pipe 15 mm dia medium grade 7.5 metre long complete all as specified and as directed. 196 supply and fix modular pvc switch box 2 module including fixing recessed in wall complete all as specified and directed. 197 supply and fix modular pvc switch box 3 module including fixing recessed in wall complete all as specified and directed. 198 supply and fix modular pvc switch box 4 module including fixing recessed in wall complete all as specified and directed. 199 supply and fix modular pvc switch box 6 module including fixing recessed in wall complete all as specified and directed. 200 supply and fix modular pvc switch box 8 module including fixing recessed in wall complete all as specified and directed. 201 supply and fix modular white cover plate with frame 2 module complete all as specified and directed. 202 supply and fix modular white cover plate with frame 3 module complete all as specified and directed. 203 supply and fix modular white cover plate with frame 4 module complete all as specified and directed. 204 supply and fix modular white cover plate with frame 6 module complete all as specified and directed. 205 supply and fix modular white cover plate with frame 8 module complete all as specified and directed. 206 supply and laying in repair gi tubing, medium grade, bore dia of pipe 40 mm, galvanised including fittings such as tees, sockets, bends elbows, union, nipple etc. laid in trenches or walls complete all as specified and as directed. 207 supply and laying in repair gi tubing, medium grade, bore dia of pipe 25 mm, galvanised including fittings such as tees, sockets, bends elbows, union, nipple etc. laid in trenches or walls complete all as specified and as directed. 208 supply and laying in repair gi tubing, medium grade, bore dia of pipe 40 mm, galvanised including fittings such as tees, sockets, bends elbows, union, nipple etc. fixed towalls and ceilings or laid in floors complete all as specified and as directed. 209 supply and laying in repair gi tubing, medium grade, bore dia of pipe 25 mm, galvanised including fittings such as tees, sockets, bends elbows, union, nipple etc. fixed towalls and ceilings or laid in floors complete all as specified and as directed. 210 supply and fix in repair gunmetal gate valve with iron wheel head, screwed for both ends for iron pipe and fixed for 40 mm bore dia of pipe complete all as specified and as directed. 211 supply and fix in repair gunmetal gate valve with iron wheel head, screwed for both ends for iron pipe and fixed for 25 mm bore dia of pipe complete all as specified and as directed. 212 excavating in trenches, not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth, for foundation, laying of pipe / cable etc. or for shaft, walls, cesspits, manholes, pier etc. not exceeding 10 sqm on plan andand getting out in hard / dense soil complete all as specified and directed. 213 excavating in trenches, not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth, for foundation, laying of pipe / cable etc. or for shaft, walls, cesspits, manholes, pier etc. not exceeding 10 sqm on plan andand getting out in soft / disintegrated rock complete all as specified and directed. 214 supply, laying, jointing, testing and commissioning of lt under ground cable 1100 volts grade xlpe ( cross linked polyethylene ) of cross sectional area and size 25 sqmm 4 core, armoured with galvanised round steel wire or steel strip, electric power cable heavy duty, with multi stranded aluminium conductor, laid in trenches, ducts / fixed on walls / poles with proper size saddles and clamp laid under roads / path / drain / culverts or enclosed in gi pipe / fixed complete including taking out of old unserviceable ug cable complete all as specified and as directed 215 material and labour for stone dust sand filling in trenches for cushioning for underground cable 8 cm before laying cable and 15 cm after laying and streching, jointing and testing the cable complete all as specified and directed.note: punned thickness shall be considered for payment. 216 supply and laying un reinforced precast concrete cable cover class lv, type 1, flat, of size 250 mm x 150 mm x 40 mm laid as cable protection cover complete all as specified and as directed. 217 supply and fix in repair gi pipe light grade with all connected accessories of size 100 mm dia complete all as specified and as directed. 218 note: amount of credit of rs. 1, 92, 891.00 for retrieved materials is mentioned in schedule of credit on srl page no. 22 of tender documents in pdf form which will be deducted offline while acceptance of tender....

Due Date : December 04, 2023

Tender Value : ₹ 1.64 Crore

View Tender
34
Department of Defence Production - Maharashtra

40403611 bids are invited for aluminium alloy sheet plate o68332105559130135 , o68332124116338651 , o68332126199912135 , o68333102224692806 , o68333102224697806 , o68333104118691031 , o68333104118691541 , o68333104118692096 , o68333104118692155 , o68333104118692155a , o68333104118692157 , o68333104118692529 , o68333104118692535 , o68333104118692537 , o68333104118692540 , o68333104118692543 , o68333104118692544 , o68333104118692546 , o68333104118692548 , o68333104118692550 , o68333104118692551 , o68333104118692552 , o68333104118692554 , o68333104118692556 , o68333104118692556a , o68333104118694016 , o68333104119111205 , o68333104119115598 , o68333104119118108 , o68333104119118126 , o68333104119118148 , o68333104119118158 , o68333104119118402 , o68333104119118402a , o68333104119118520 , o68333104119118522 , o68333104119118699 , o68333104119119109 , o68333104119119113 , o68333104119119113a , o68333104119119114 , o68333104119119115 , o68333104119119118 , o68333104119119119 , o68333104119119120 , o68333104119119121 , o68333104119119122 , o68333104119119125 , o68333104119119126 , o68333104726697945 , o68333105118699777 , o68333105559155914 , o68333105718656730 , o68333105718656939 , o68333126199801334 , o68333126199801735 , o68333126199801935 , o73132105118430035 , o73132105118434012 , o73132105118638003 , o83181047266991376 , o8332105131122197 , 64018123172528300 , o68332105118654008b 1 56 total quantity : 463200...

Due Date : December 09, 2023

Tender Value : ₹ Ref. Documents

View Tender
35
Military Engineer Services - Maharashtra

40392435 tender for additional / alternator to building no. 811 at vsn, nagpur; 1 material and labour for rolled mild steel roof trusses ( framed ) , trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing ( beam, tee, angle, channel or flat ections ) including distance pieces, cleats etc.confirming to fe 410 w ( gde e 250 ) quality acomplete all as specified and as directed. 2 material and labour for steel work in tubular trusses including special shaped washer etc. complete using erw or induction butt welded tubes conforming to i. s.1161 1979 grade st. 240 complete all as specified and as directed. 3 material and labour for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or othercovering. doors, etc. to be prepared for hanging or sliding with and ncluding either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rails and guides ) and hanging; also fastening and fixing complete ( fe 410 w ( gdee 250 ) quality acomplete all as specified and as directed. 4 material and labour for preparing new steel and iron surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed. 5 supply and fixing of pre painted galvatume aluminum zinc coating gi based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed. 6 supply and fixing pre painted galvalume aluminum zinc coating gi based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws as complete all as specified and as directed. 7 material and labour brick work with fly ash sub class bricks straight or curved on plan exc. 6 mtr mean radius built in cm ( 1:6 ) including demolition of existing brick work where ever required complete all as specified and as directed. 8 material and labour for 10 mm thick rendering ( internal ) on fair faces of brick masonry or concrete surfaces of wall in cm ( 1:6 ) , finished even and smooth without using extra cement complete all as specified and as directed. 9 material and labour for 15mm thick rendering ( external ) on fair faces of brick masonry or concrete surfaces of wall in cm ( 1:4 ) , finished even and smooth without using extra cement complete all as specified and as directed. 10 material and labour for preparation of newly plasteredsurfaces of walls, and applying two coats ofcement based paint over a coat of cement primer complete all as specified. 11 material and labour for preparation of new plastered surfaces of wall and applying two coats of oil bound distempr over a coat of primer complete all as specified and s directed. 12 supply and fixing pressed steel frames of size165x60mm withhinges , 100mm size ( 3 nos each chowkhat ) with one or more rebates including necessary fixing lugs, lock strike plate, etc all as specified and as directed. 13 material and labour for pcc ( 1:3:6 ) type c 1 for ps frame filling all as specified and as directed. 14 supply and fixing 30mm thick flush door shutter solidcore construction with block board case and plywood face panels, commercial type on both sides all as approved by ge complete all as specified and directed. 15 supply and fixing aluminium alloy, anodised, sliding door bolt ( 250mm long ) with hasp, nstaple ( bolt type ) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast uminium alloy and fixed complete all as specified and as directed 16 supply and fixing floor door stopper 140mm long of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed 17 supply and fixing mild steel butt hinges medium weight size 100mm long complete all as specified and as directed 18 supply and fixing aluminium handles cast type anodisedsize 150 mm long complete all as specified and as directed 19 supply and fixing aluminium anodiesed barrel tower bolt of extruded section size 200 mm complete all as specified and as directed 20 supply and fixing factory made upvg white colour sliding window three track made of extruded profiles with wall thickness of 2.3mm ( + 0.2mm ) . window profile with hollow section with multi chamber. frame ( 88mm 52mm ) , sliding sash ( 42mm x 67mm ) . sliding mesh sash ( 42mm x 57mm ) sliding interlock ( one vertical length in each shutters ) ( 45.5mm x 28mm ) , glazing bead ( 24.5mm x 16mm ) will be miterd cut and fusion welded at allorners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. epdm gasket, 1.2+ 0.2mm thick galvanised steelframe ( 30mm x 18mm ) 2 nos, sliding sash30mm x 18mm ) , sliding mesh sash ( 26mm x 10mm ) profile tobe inserted in required profile, frame will be fixed tothe wall with 8mm x 100mm long fasteners, hardware [ touch lock of zinc alloyed ( white powder coated ) , steel roller system. stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. ( note: the unit rate quoted by contractor excludes cost of glass and includes allther connected accessories. net opening will be measured lor payment purpose. ) ( a ) area not exceeding 2.00 sqm each complete all as specified and as directed 21 supply and fixing anodised aluminium grill ( anodised transparent or dyed to requiredshade according to is: 1868 with minimum anodic coating of grade ac 15 ) of approved design / pattern, with approved standard section and fixed to thexisting window frame with c.p. brass / stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standardsection around the opening, all as specified and as directed. 22 supply and fixing tinted glass of selected quality, 5 mm thick , and glazing with aluminium beading in aluminium frame complete all as specified and directed. 23 supply & fixing false ceiling at all heights with grg ( glass fibre reinforced gypsum ) ( with semi perforated 12mm thick micro tegular edged grg false ceiling tiles ) false ceiling tiles of size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, nrc0.50 to 0.75 as per is 8225:1987, noncombustible as per bs 4 76 ( part 4 ) 1970 and light reflectance of 85% ( minimum ) to be laid in truehorizontal level suspended on interlocking metal t grid ofot dippedgalvanized iron section of 0.33mm thick ( galvanized @ 120 grams per sqmincluding both sides ) comprising of maint runners of size 15 x 32 mm of length3000mm, cross t of size 15x 32mm oflength 1200mmnd secondaryintermediate cross t of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm , suspended from ceiling using galvanized mild steel items ( galvanizing @ 80 grams per sqm ) i.e50mmong, 8mm outer diameter m 6dash fasteners, 6mm dia fully threadedhanger rod upto 1000mm length and lshape level adjuster of size 85x25x2mm.galvanised iron perimeter wall angle ofsize 24x 24x0.40mm ofength 3000 mmto be fixed on periphery wall i partitionwith the help of plastic rawl plugs at 450mm center to center and 40mm long drywall wood screws complete all as specified and directed. 24 dismantling of floor, hearth or wall tiling including cement mortar bedding ( but not backing ) , removing serviceable tiles to store and rubbish off the premises all as specified and directed. 25 material and labour non skid coloured ceremic tiles 7 to 8 mm thick ( square / rectangular ) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, over and including 15 mm screed bed in cement mortar ( 1:6 ) in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tilesall as specified and directed. 26 material and labour glazedceramiccolour tiles in vertical surface of size 350x 250x 7 mm / 450x 300x 7mmthick over and including rendering 10mm thick cm 1:4 setand jointed in neat cement slurry and pointed in white or colour cement to match with thetile colour complete as specified and directed. 27 material and labour for granite ( of any type ) work ( table rubbed and polished ) of 20mm thick in steps, jambs, pillars, window cills, cooking platformsover screed bed or bedding layer of mortar 15mm thick cm ( 1:4 ) work table rubbed and polished in steps, jambs, pillars, window cills, cooking platform and like in cement in cm 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite stone including grinding and polishing complete allas specified and directed. 28 material and labour for machine cut cudappah stone slab 20 25mm thick over cement screed base 15 mm thick in cm ( 1:4 ) , laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishingcomplete all as specified and directed. 29 material and labour rounding to one edge of stone slabs edges, such as in steps, cooking platform, and other similar situations complete all as specified and directed. 30 supply and fixing pvc ( swr ) pipes, 75 mm bore, single socketed, in any length, with rubber ring joints, fixed to floor / wall all as specified and directed. 31 supply and fixing pvc ( swr ) bends, 75 mm bore all as specified and directed. 32 s & f pvc ( swr ) tee 75 mm borecomplete all as specified and as directed. 33 supply and fixing in repairs brass chromium plated bottle traps 40mm bore for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed all as specified and directed. 34 supply and fixing in repair grating doom 125 mm dia with waste hole of ptmt. ( minimum weight 40gms ) all as specified and directed. 35 material and labour for pvc ( swr ) floor trap with grating 75 mm bore, including jointing to waste pipe with solvent cement including taking down of existing old trap all as specified and directed. 36 supply and fixing high density polyethylene pipes ( hdpe ) of15mmbore diaof pressure rating 6 kgf / cm2 fixed complete to walls, ceilings or in floors etc. including taking down old one all as specified and as directed. 37 all as per itemn no 36 above but 20mm bore dia. 38 supply and fixing in repair cast iron nahani trap, with grating100 mm dia including jointing to waste pipe fixed in cement concrete type b 1 ( 1:2:4 ) all as specified and directed. 39 supply and fixingin repairhand shower ( health faucet ) ( abs body ) with 8mm dia, 1.5 meter long spiro chrome flex tube & wall hook all as specified and as directed.make ; jaguar code ald 587 or equivalent in hindware / parryware 40 supply and fixingin repair pillar cock15mm dia, swan neck tap with lefthand operating knob with 450mm long braided hose complete all as specified and as directed.make ; jaquar code con 123bkn or equivalent in hindware / parryware 41 supply and fixingin repair 2 way bib cock with wall flange, chromium plated, 15mm, complete all as specified and as directed.make ; jaguar code fus 29041 or equivalent in hindware / parryware 42 supply and fixing in repair bib cock, chromium plated, 15mm dia , complete all as specified and as directed.make ; jaguar, code con 037kn quivalent in hindware / parryware 43 supply and fixingin repairstop cock, chromium plated, 15mm, complete all as specified and as directed. make ; jaguar, code fon 40053 quivalent in hindware / parryware 44 supply and fixingin repair soap dish holder ( cp brass ) complete all as specified and as directed.make ; jaguar, code akp 35731p or equivalent in hindware / parryware 45 supply and fixingin repair towel rail, complete all as specified and as directed.make jaguar, code aqn 7711or equivalent in hindware / parryware 46 supply and fixing in repair toilet paper holder with flap, make jaguar, code akp 35753ps or equivalent in hindware / parryware 47 supply and fixingin repair 10 litres capacity pvc valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and taking down old one complete all as specified and as directed 48 supply and fixing in repair vitreous chain squatting pan, orrissa pattern size 630x450mm white with integral foot rests, including pvc p or s trap ( excluding flushing cistern and flush pipe ) complete bedding all as specified and directed. 49 supply and fixing in repair vitreouschina wash down water closet pan ( pedestal pattern ) , white, including fixing of flush pipe, nut bolts, brackets etc complete all as specified and as directed. 50 supply and fixingin repair plastic water closet seat cover, black / white, closed pattern with flat bottom, and cover and mild steel chromoium plated or aluminised hinging devices complete all as specified and as directed. 51 supply and fixing in repairpvc connections 15mm size with ptmt nuts of length 450mm complete all as specified and directed 52 supply and fixing in repair vitreous china wash basin, white, flat back oval of size 550 x 400 mm including ci brackets, waste coupling , brass cp pillar tap 15mm screwed down high pressure , ptmt bottle trap, pvc supply pipe 15mm from stop valve 450mmetc complete all as specified & as directed 53 material and labour for preparation ofexisting treatment on wall surfacesfilling of holes, cracks and uneven surfacs of wall with wall care putty orplaster of paris and applying one of oil bounddistemper all as specified and as directed. 54 material and labour for preparation of existing treatment on wallsfilling of whole, cracks with lime putty or plaster of paris and applying one coat of cement based paint, all as specified and directed. note : the quoted rate shall deemed to be included cost of removal of vegitation, plants etc if any on the wall surfaces. 55 material and labour for preparation ofexisting treatment on ceiling surfacesfilling of holes, cracks and uneven surfacs of wall with wall care putty orplaster of paris and applying one coat of white wash all as specified and as directed. 56 e / m portion 57 material and labour for sub main wiring complete with two single core 6 sqmm frls pvc insulated unsheathed stranded copper conductor cable drawn through in and including 20 mm dia rigid non metallic pvc conduit heavy grade and conduit accessories including 6 sqmm frls pvc insulated unsheated stranded copper earth cable connected to common earth dolly complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface all as specified and directed.. note: 3 run of 6 sqmm & one run of pvc conduit shall be measuredas single unit 58 all as per item no 56but 20 mm dia rigid non metallic pvc conduit heavy grade with two runs of 2.5 sqmm and earth continiuty conductor of size 2.5 sqmm all as specefied and directed. note :3 run of 2.5 sqmm & one run of pvc conduit shall be measuredas single unit 59 material and labour forpoint wiring ( concealed ) on walls and surface on ceiling complete with fr pvc insulated unsheathed 1100 volts grade, conforming to is 694, 1.5 sq mm ( nominal area ) multi stranded copper conductor cable drawn though in and including non metallic medium grade rigid pvc conduit heavy grade accessories, isi marked, 19 / 20 mm dia including all accessories, concealed in wallsby cutting chases using machine and making good the disturbed surface, with and including suitable modular boxes , switch plates of suitable make and 1.5 sq mm copper earth continuity wire connected to earth dolly complete for the following complete all as specified and as directed. ( a ) one light point controlled by one switch 60 ( b ) one fan point controlled by one switch 61 ( c ) one switch socket outlet modular type 3 pin 6 amp on same board. 62 all as per item no 60 above but 1.5 sq mm cable sizeand 1.5 sq mm earth continuity wire for one 3 pin socket outlet, 6 amps on independent board. 63 all as per item no 61 above but 2.5 sq mm cable sizewith 2.5 sq mm earth continuity wire for one 3 pin socket outlet, 16 amps on independent board. 64 note for item no. 56 to 62 : the disturbed surfaces of wall for concealing box / wiring shall be makinggood by applying cement plaster, putty and colour wash etc matching with the existing surfaces.the qouted rate for point wiring shalldeemed to be include the cost of making good. 65 taking down old unserviceable and supply and fixingnew master led tube 4ft20 w led tube polycarbonate type having nominal system lumen output of 2000 lumens and a minimum system efficacy of 100 lm / w. the luminaire shall have a rated system lifetime of 40, 000 burning hours at l70.the luminaire should have a color temperature of 6500k and cri>83. the luminaire shall meet ip20 rating with thd < 10% and pf > 0.95. the total power consumption should not exceed 20w ( including driver ) complete all as specified and as directed. make :cg cat part no. lt8 20 865 ( 2 ) or equivalent in bajaj / wipro / philips. 66 taking down old unserviceable and supply and fixingnew decorative box typefittingwith blue coloured end caps pre wired for led tube energyof 20 watt . make : cg cat part no. dmln1lt8 16 or equivalent in bajaj / wipro / philips. 67 supply and fixing 0 4 step, one module, modular type electronic regulator for ceiling fan 1200 mm sweep, 240 volts, 100 watts humfree single pole, all as specified and as directed.make : legrand cat no. 675531 or equivalent in l& t / havells / seimens 68 supply and fixingswitch modular type, single pole one way 6 amps, 250 volts ac suitable for modular switch boxes without indicator, all as specified and as directed. make : legrand cat no. 675501 or equivalent in l& t / havells / seimens 69 supply and fixingsocket modular type6 amps 3 pin 2 module250 volts all as specified and as directed. make : legrand cat no. 675551 or equivalent in l& t / havells / seimens 70 supply and fixingceiling rose, surface bakelite, 65 x 50 mm, two to three terminals all as specified and as directed. 71 supply and fixingsocket modular type 16 amps, 3 pin combine, 2 module, 240 volts all as specified and as directed. make : legrand cat no. 675555 or equivalent in l& t / havells / seimens 72 supply and fixingswitch modular type 16 amps, one way with indicator, 1 module, 240 volts all as specified and as directed. make : legrand cat no. 675513 or equivalent in l& t / havells / seimens 73 supply and fixingsheet metal enclosures for spn dbs with metal double door for incorporating mcbs, ip 43, 8 way with 200 amps rated busbar, 240 volts, as per is 8623 all as specified and as directed.make : legrand cat no 507611 or equivalent in l& t / havells / seimens 74 supply and fixingmcb spn, 32 amps, breaking capacity 10 ka c curve confirming to is / iec 60898 1 2002, integrated label holder, sliding bottom clamp , ip 20 protected terminal, sliding shutters, 240 volts, 50 hz including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc all as specified and as directed.make : legrand cat no. 408617 or equivalent in l& t / havells / seimens 75 supply and fixing mcb sp 10 32amps, breaking capacity 10 ka c curve confirming to is / iec 60898 1 2002, integrated label holder, sliding bottom clamp , ip 20 protected terminal, sliding shutters, 240 volts, 50 hz including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc all as specified and as directed. 76 supply and fixingenergy saving ceiling fan 1200 mm sweep with double ball bearing in opal white colour and bee 5 star rated bldc complete including down rod of suitable length with clamp as required in ground, provision of 3 core copper wire ofsize 1.5 sqmm connected from ceiling rose to fan and marking mes no in black paint complete all as specified and as directed....

Due Date : November 27, 2023

Tender Value : ₹ 19.40 Lakhs

View Tender
36
Maharashtra State Road Transport Corporation - Maharashtra

40377961 all types of scrap material scrap of old u/s ber nylon tyre size 9.00x20 kept as it is .lot 1,scrap of old u/s ber radial tyre size 9.00x20 kept as it is . lot 2,scrap of old u/s ber radial tyre size 9.00x20 kept as it is . lot 2a,scrap of old u/s ber 10.00x20 tyres (nylon / radial) kept as it is lot 3,scrap of old u/s ber tubeless tyres size 295/80r/ 22.5 kept as it is lot 3a,scrapped buffed tyres of assorted size kept as it is lot3b,scrap of old u/s ber rubber tubes (nylon / radial )with or w/o valves size 9.00x20 ,10.00x20 kept as it is . lot5,scrap of old u/s ber epdm/ natural rubber flaps size 9.00x20/10.00x20 kept as it is. lot7,scrap of old u/s ber rubber /epdm pieces of tyre tubes and flaps,hose with or without union /connector etc kept as it is lot8,scrap of old u/s empty paint, thinner and bonding gum drums. 20/25 ltrs. capacity m.s. assorted as it is lot 14,scrap of old u/s ber ms empty engine oil barrels 210 ltrs capacity with or without cap kept as it is lot 9,scrap of old u/s ber empty grease oil barrels 210 ltrs capacity kept as it is as per catelog lot9a,old u/s empty plastic pvc barrel 210 ltrs. cap. with or without cap kept as it is. lot 15,scrap of ferrous m.s. constg. of bus body kept as it is. lot21,scrap of workshop wastage consisting as per main catlog . alluminium and copper if any will be withdrawn while delivery of the lot. lot 21a,scrap of non ferrous old u/s ber aluminium kept as it is.as per main catlogwooden,m.s., brass and copper attachment will be removed by bidder in presence of delivery committee. lot28,scrap of ferrous old u/s ber pieces of m.s. steel spring leaves assorted size kept as it is.,scrap of ferrous miscellaneous auto spares constg. kept as it is as per main catalogue. (without drums/ bags,scrap of ferrouos cylinder liner of tata / leyland kept as it is approx, 800,scrap of ferrous brake rachet assy and body / slack adjuster of assorted size with our without patti ketp as it is,scrap of ferrous of shockabsorber assorted size ketp as it is approxmit qty 280,scrap of ferrous auto gear part items various size gear wheel, gear shaft, drive shaft, gear sleeve synchro sleeves, forks and synchro rings etc.(ms / ci) kept as it is,scrap of ferrous tata ,leyland , eicher gear box and clutch housing kept as it is,non ferrous scrap of u/s aluminium alloy , kept as it is,scrap of old u/s ber tata / leyland flywheel 8 with or without rings 31 kept as it is,scrap of old u/s ber volvo flywheel with or without rings kept as it is,scrap of old u/s ber fuel injection pump assy and spares kept as it is,scrap of old u/s ber tata leyland front and rear brake drums assorted size kept as it is,scrap of old u/s ber scania brake caplier assorted size kept as it is,scrap of old u/s ber volvo brake caplier assorted size kept as it is,ferrous scrap of old u/s ber bearing incl. of cone, ball, cage assorted size kept as it is .,ferrous scrap of old u/s ber water pump assly kept as it is .,non ferrous scrap of old u/s ber tata leyland inter cooler kept as it is,non ferrous scrap of old u/s ber radiator core of aluminum with or without top and or botton / brackets kept as it is .,non ferrous scrap of old u/s ber staff car radiator core of aluminum with or without top and or botton / brackets kept as it is .,ferrous scrap of old u/s ber clutch plate of tata and leyland assorted size kept as it is.,ferrous scrap of old u/s ber pressure plate bsiv assy kept as it is .,ferrous scrap of old u/s ber volvo pressure plate clutch plate 6 kept as it is. (clutch plate 9 nos and pressure palte 6 nos ),ferrous scrap of old u/s ber back plate only assoreted size kept as it is lot 62,ferrous scrap of old u/s ber face plate assorted size kept as it is lot62a,ferrous scrap of old u/s ber steel propeller shafts with or without yoke,brackets etc.m.s. kept as it is,scrap of old u/s ber starter armature with or w/o commutator and winding as it is. lot69a,scrap of old u/s ber rotor kept as it is lot69b,scrap of old u/s ber stator kept as it is lot69c,ferrous scrap of old u/s ber malleable auto items constg. of hanger shackel, bracket, as per main catlog . m.s. / c.i kept as it is . lot75,scrap of old u/s ber tata and leyland wheel disc kept as it is . lot78,scrap of old u/s ber volvo wheel disc kept as it is .lot78a,scrap of mono lid acid battery 12 v150 ah light weight pp batteries kept as it is. lot84,scrap of invertor batteries kept as it is,scrap of shivshahi battery 12v180ah kept as it is lot94b,scrap old u/s ber e waste lot of as per main catlog etc. kept as it is lot93,scrap old u/s ber ac blower motors kept as it is lot93a,scrap of old u/s ber auto / general electric materials consisting of auto bulb, flo.tubes electrical wires etc.as per main catloghog .located at two places kept as it is .lot94a,scrapped old u/s ber electric horns kept as it is lot94a,scrap of used / burnt engine oil with barrel free from water .water if any in the oil will be removed from oil barrel and will be toped upto 210 ltrs. by the bidders in presence of delivery committee kept as it is. lot95,scrap of used burnt engine oil and used grease sludge kept as it is lot95a,scrap of old u/s ber various types of plant/ machinery pme etc.kept as it is as per main catlog lot100,scrap of all types of filters engine oil filters, diesel filter, air filter, steering filter, as per main catlog items other than filters will be removed in presence of delivery committee.lot115,scrapped structure of bus skeleton 6 without chassis and with or without seats kept as it is as per main catlog lot115,scrap of old u/s ber front and rear hubs of tata /leyland kept as it is lot116,scrap of old u/s ber front and rear hubs of volvo kept as it is lot116a,scrap of old u/s ber viscous with or without fans kept as it is lot 117,scrap old us ber soloniod switch kept as it is lot117a,scrap cutting paper kept as it is lot135,scrap cargorated straw board wrapping and khaki paper kept as it is 2 location lot 135a,scrapped old ber furniture wooden and steel kept as it is lot140...

Due Date : November 01, 2023

Tender Value : ₹ Ref. Documents

View Tender
38
Maharashtra State Road Transport Corporation - Maharashtra

40358675 all types of scrap material scrap of old unserviceable ber nylon tyres 9.00 x 20 as is where is, scrap of old unserviceable ber radial tyres 9.00 x 20 as is where is, scrap of old unserviceable ber radial tyres 10.00 x 20 as is where is, scrap of old unserviceable ber radial tyres 10.00 x 20 as is where is, scrap of old unserviceable ber radial tyres 10.00 x 20 as is where is, scrap of old unserviceable ber radial tyres 10.00 x 20 as is where is, scrap of old unserviceable ber radial tyres 10.00 x 20 as is where is, scrap of old unserviceable ber radial tyres 10.00 x 20 as is where is, scrap of old unserviceable ber radial tyres 10.00 x 20 as is where is, scrap of old unserviceable ber radial tyres 10.00 x 20 as is where is, scrap of old unserviceable ber radial tyres 10.00 x 20 as is where is, scrap of old unserviceable ber radial tyres 10.00 x 20 as is where is, scrap of old unserviceable ber radial tyres 10.00 x 20 as is where is, scrap of old unserviceable ber nylonradial buffed tyres size 9.00 x 20 10.00x20295x80rx22.5 assorted. as is where is., scrap of old unserviceable ber radial tyres of volvo bus 295x80rx22.5 as is where is, scrap of old unserviceable ber rubber tubes 9.00 x 20 10.00 x 20 with or wo valve as is where is, scrap of old unserviceable rubber flaps assortaed size as is where is, scrap of old unserviceable ber pieces of tyres tubes and flaps assorted size as is where is, scrap of old unserviceable ber empty ms oil barrels 210 ltr capecity b grade as is where is, empty old engine oil barrel 210 litres capacity c grade m.s. as is where is, empty old grease barrel 182 kg capacity with or without lid ms as is where is, old unserviceable empty paint thinner drums 20 25 litres capacity m.s.as it is., scrap of old unserviceable ber empty plastic coolent drums 210 ltr. cap. as is where is, scrap of old unserviceable card board packing materials as is where is, scrap of old unserviceable ber cut pieces of rexine foam fancy rider pieces of foam etc, scrap of old unserviceable ber m.s.description in details as per auction catlauge, ferrous scrap of old unserviceable ber seats back cusion with alluminium back as it is, scrap of old unserviceable ber seats cousions and backs of ordinary and semi luxury buses as it is, non ferrous scrap of old unserviceable ber passenger doors in assorted size of alluminium as is where is, ferrous non ferrous scrap of old unserviceable ber driver doors emergency door partition door in assorted size as is where is, scrap of old unserviceable ber misc rubber consisting rubber items etc as is where is, scrap of old unserviceable ber aluminium plain or painted description in details as per auction catlauge as is where is, ferrous scrap of old unserviceable ber spring leaves asorted size as is where is, ferrous scrap of old unserviceable ber tataleyland misc. auto description in details as per auction catlauge as is where is, ferrous scrap of old unserviceable ber tata leyland special auto as per catlauge as is where is, scrap of ferrousunserviceable ber aluminium piston without pins rings and circlips., non ferrous scrap of old unserviceable ber alluminum alloys as per catlauge, ferrous scrap of old unserviceable ber fly wheel assy with ring 1512 1612 tata leyland as is where is, ferrous scrap of old unserviceable ber tata leyland brake drum front rear assorted as is where is three location, ferrous scrap of old unserviceable ber axel shafts, scrap of old unserviceable ber tata leyland crown wheel and pinion with cage and carriers as is where is, ferrous scrap of old unserviceable ber bearing assorted as is where is, ferrous scrap of old unserviceable ber clutch realease bearing king pin bearing ball bearing and all other bearing assorted as is where is, ferrous scrap of old unserviceable ber gear box casing of cast iorn assorted as it is, non ferrous scrap of old u s ber radiator assy 1512 1612 with intercooler as is where is, non ferrous scrap of old us ber intercoolers asorted as is where is, non ferrous scrap of old u.s ber radiator core with top and bottem tata leyland as is where is, non ferrous scrap of old u s ber copper radiator assy tata leyland as is where is, ferrous scrap of old unserviceable ber tata leyland ss clutch plate with or w out centre hubfacing assorted as is where is, scrap of old unserviceable ber tt ll back plate of pressure plate assy as is where is, ferrous scrap of old unserviceable ber pressure plate assy with or without cover discription as per catlauge as is where is, scrap of old unserviceable ber leyland face plates as is where is, scrap of old unserviceable ber diesel tank discription as per catlauge as is where is, ferrous scrap of old unserviceable ber steel propeller shafts with or without yoke brackets etc m s, scrap of old unserviceable tt ll ber engine alternator assy assorted as is where is, ferrous scrap of old unserviceable ber starter armature as per cattlauge, scrap of old u s ber brake lining and clutch facing assorted as it is, scrap of old unserviceable ber malleable auto items description in details as per auction catlauge as is where is, scrap of ferrous scrap of old unserviceable ber wheel discs tata leyland and with or without ring as it is, scrap of ferrous scrap of old unserviceable ber tt ll shivshahi and volvo bus wheel discs as is where is, scrap of old us ber broken windshild glasses assorted as is where is, scrap of old unserviceable ber batteries light weight 12v x 19pl description in details as per auction catlauge, ferrous scrap of old unserviceable ber front rear hub of tata leyland shivshahi bus description as per catlouge, scrap of old unserviceable ber auto and general electrical material discreption as per catlouge, scrap of work shop sweep description as per catlauge, scrap of old unserviceable burnt used engine oil in bareel of 210 ltr capicity ., ferrous non ferrous scrap of old unserviceable all type of filters, non ferrous scrap of old unserviceable ber copper wires in various gauge, ferrous non ferrous scrap of old unserviceable ber vehicles buses body skeleton description as per catlouge, ferrous scrap of old unserviceable ber leyland tata water pump assorted as is where is, scrap of old ber soloniod switch assorted as it is, scrap of old unserviceable ber tata ley slack adjuster assy rr and frt assorted as is where is, ferous non ferous scrap of old u.s ber electric horn as is where is, ferous non ferous scrap of oldus ber assorted wiper armature as is where is, non ferrous scrap ven pump as is where is discription as per auction catlauge, non ferrous scrap of brass bush as is where is, ferous non ferous scrap of old us ber ac condensor fan 50 nos and ac blower motor 50 nos as is where is, scrap of old unserviceable ber alternator steter assy discription as per auction catlauge...

Due Date : November 03, 2023

Tender Value : ₹ Ref. Documents

View Tender
40
Military Engineer Services - Maharashtra

40332441 tender for special repairs to internal link roads at ncc ota kamptee; 1 repairs to pot holes any depth, not exceeding 1 sqm each including sweeping free from dust with mechanical equipment and mud or water, scoring sunken surfaces in roads, paths etc by using pressure air , cutting around edges to atleast 25mm in depth, making good by applying tack coat at 5 kg per 10 sqm, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sqm blinded with 0.09 cum of stone chippings 6.3mm size and again well rammed ( including supply of premixed bituminous macadam, binder and chippings ) , depth of pot holes exc 30mm complete all as specified and as directed. 2 material and labour for scarifying or picking gravelled, macadam or bituminous macadam surfaces in area n.exc 400 sqm and n. exc 50 mm deep and removal from site , complete all as specified and directed. 3 material and labour for preparing unsurfaced wbm by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt and applying evenly a priming / tack coat with bituminous primer at 10 kg per 10 sqm using paving bitumen grade vg 10 on unsurfaced wbm using mechanical sprayer complete all as specified and directed. 4 material and labour for premixed bituminous macadam ( consolidated thickness 75mm or less ) using with 4% binder content ( paving bitumen any penetration of grade vg 30 ) by weight of total mix and 1.5 % cement filler, mixed in hot mixed plant and laid by using mechanical paver and rolled and compacted to required gradient and camber using 8 to 12 tonne power roller complete all as specified and as directed. 5 material and labour for preparing black top surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surface with mechanical equipment, to remove all loose dirt etc. completeall as specified ans directed. 6 material and labour forapplying evenly a priming / tack coat with bituminous primer over black top surface at 5 kg per 10 sqm using paving bitumen grade ( vg 10 ) on blacktop surface using mechanical sprayer and providing premix asphaltic semi dense concrete 30mm consolidated thickness with 5.5% binder content ( paving bitumen any penetration of grade vg 30 ) by weight of total mix and 2 % cement filler, rolled and compacted to required camber and gradient , using 8 to 10 tonne power roller complete all as specified ans directed. note: the work shall be executed by using hot mix plant & mechanical paver. the rate quoted shall be deemed included for cement filler. 7 material and labour for painting lines, dashes, arrows etc. by applying 2.5mm thick thermo plastic road marking compound of white / yellow of approved make and shade for road marking, not exc. 10cm width on new / old surfaces bituminous roads / pavements or on cement concrete surfaces using hot proceessor plant complete all as specified ans directed as per manufacturers instructions. 8 supply and fix delineators made out of ms pipe 75mm dia with powder coating / stove enamel paint, 120 cm long with 3 nos 100mm wide prismatic / reflective light material crystal lattice sheeting colour coding as approved and provided with reinforced mesh and including cement concrete 1:2:4 type b1 as in foundation fillingcomplete all as specified and as directed.make: dark eye, 3 m , ace polymers ( india ) or techno commercial equivalent as approved by ge. 9 supply and fix in repairs solar road stud of size 125 mm x 125 mm x 20 mm aluminium alloy & polycarbonate stud ( red / yellow leds ) 3 x 3 leds with shank in tough aluminium diecast body with stem complete all as per morth / irc specification and manufactures instructions, complete all as specified and directed.make: dark eye or techno commercial equivalent as approved by ge. 10 surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out in soft / loose soilcomplete all as specified and as directed. 11 material and labour for cement concrete 1:4:8 type d 2 ( using 40mm graded stone aggregates ) as in sub bases / pavings complete all as specified and as directed. 12 material and labour for sand filling under flooring / pavement, spread and levelled in layers not exceeding 15 cm thick, complete all as specified and as directed. 13 material & labour for machine pressed pre cast concrete interlocking tiles ( paver block ) any shape, colour and size confirming to is 15658 2006 of 60 mm thick by using m 35 grade concrete with grey cement and pigment finished with coloured rubber finish on top finished over sand dust cushion of 30mm thick , complete all as specified and as directed. note: sand cushion will be measured and paid seperately. 14 material and labour for pcc 1 : 3 : 6 type b1 ( using 20 mm graded stone aggregate ) , as in copings. plinth courses including necessary form work weathering slightly rounded or chamfered angles, throating exposed surfaces finished even and faircomplete all as specified and as directed. 15 supply and fixing in repairs abs road colour cat eyes having dual direction ( both sides ) of size 100mm x 100mm x 18mm having body abs filled with epoxy, quartz & sand with pmma lens with load capacity greater than 50 kg with visibility 800 m etc. complete all as specified and as directed.make: dark eye or techno commercial equivalent as approved by ge. 16 surface dressing n.exc 15 cm deep and getting out in soft / loose soil for road side berms to required gradient complete all as specified and as directed. 17 material & labour for 150 mm thick moorum / red bajri filling in floors or pavings, spread, levelled and rammed including watering complete all as specified and directed....

Due Date : November 22, 2023

Tender Value : ₹ Ref. Documents

View Tender
41
Department of Defence Production - Maharashtra

40324387 bids are invited for alluminium alloy flat plate sheet forging 2 155 o68318103264210627 , o68318103264212471 , o68318103264212474 , o68318103264216738 , o68318103323202729 , o68318103323210780 , o68318103323210877 , o68318103323211071 , o68318103323215437 , o68318103323215921 , o68318103323215921a , o68318103323218540 , o68318103323221588 , o68318103323236302 , o68318103323245409 , o68318103323245996 , o68318104051606014 , o68318104064017546 , o68318104064108045 , o68318104064601008 , o68318104064601058 , o68318104064602062 , o68318104064602564 , o68318104064603092 , o68318104064603537 , o68318104064604082 , o68318104064604542 , o68318104064605069 , o68318104064605514 , o68318104064606032 , o68318104064606528 , o68318104064608564 , o68318104064609518 , o68318104064611537 , o68318104064612529 , o68318104065404049 , o68318104067601242 , o68318104067601242a , o68318104067601378 , o68318104067601398 , o68318104067602063 , o68318104067602552 , o68318104067604779 , o68318104067610516 , o68318104067612284 , o68318104067617569 , o68318104067623078 , o68318104067626476 , o68318104067626589 , o68318104067635748 , o68318104069601178 , o68318104069601378 , o68318104069601978 , o68318104069609178 , o68318104118603020 , o68318104118604084 , o68318104118604587 , o68318104118615570 , o68318104118616503 , o68318104118618518 , o68318104118619572 , o68318104118699825 , o68318104119116575 , o68318104119117072 , o68318104119118284 , o68318104119118483 , o68318104119118490 , o68318104119118799 , 1 155o68318104119118490 , o68318104119118799 , o68318105106183587 , o68318105119486559 , o68318105119486656 , o68318105618640023 , o68318105618642060 , o68318105618650014 , o68318105619634079 , o68318105619640093 , o68318105619650084 , o68318105619656971 , o68318105619661821 , o68318105619695383 , o68318105620650057 , o68318105718564927 , o68318106019613088 , o68318106019618272 , o68318106019618846 , o68318106019618914 , o68318106019624462 , o68318106223602739 , o68318106226689042 , o683181062656...

Due Date : November 11, 2023

Tender Value : ₹ Ref. Documents

View Tender
44
Department of Defence Production - Maharashtra

40317142 bids are invited for aluminium alloy flat plate sheet forging 2 155 o68318101018414753 , o68318101018414759 , o68318101018414762 , o68318101018414763 , o68318101018414764 , o68318101018414765 , o68318101018414766 , o68318101018414767 , o68318101018414768 , o68318101018414769 , o68318101018414770 , o68318101018414771 , o68318101018414772 , o68318101018414773 , o68318101018414775 , o68318101018414778 , o68318101018414779 , o68318101018414780 , o68318101018414781 , o68318101018414783 , o68318101018414784 , o68318101018414785 , o68318101018414786 , o68318101018414787 , o68318101018414788 , o68318101018414789 , o68318101018414790 , o68318101018414791 , o68318101018414792 , o68318101018414793 , o68318101018414795 , o68318101018414798 , o68318101018414799 , o68318101018414800 , o68318101018414804 , o68318101018414805 , o68318101018414806 , o68318101018414807 , o68318101018414808 , o68318101018414811 , o68318101018414812 , o68318101018414816 , o68318101018414818 , o68318101018414894 , o68318101018414914 , o68318101018414915 , o68318101018414916 , o68318101018414917 , o68318101018414919 , o68318101018414920 , o68318101018414921 , o68318101018414923 , o68318101018414925 , o68318101018414928 , o68318101018414930 , o68318101018414931 , o68318101018414933 , o68318101018414935 , o68318101018414937 , o68318101018414939 , o68318101018414941 , o68318101018414942 , o68318101018414944 , o68318101018414946 , o68318101018414949 , o68318101018414950 , o68318101018414951 , o68318101018414952 , 1 155o68318101018414951 , o68318101018414952 , o68318101018415006 , o68318101018415007 , o68318101018415008 , o68318101018415011 , o68318101018415013 , o68318101018415014 , o68318101018415016 , o68318101018415017 , o68318101018415018 , o68318101018415192 , o68318101018415197 , o68318101018415507 , o68318101018415702 , o68318101018415732 , o68318101018415764 , o68318101018415765 , o68318101018415811 , o68318101018415816 , o68318101018415849 , o68318101018415896 , o68318101018415974 , o683181010184162...

Due Date : December 09, 2023

Tender Value : ₹ Ref. Documents

View Tender
45
Rural Development Department - Maharashtra

40315317 providing supplying and erecting for different material machinery and labour services for 1 year at grampanchayat gorhekh haweli ( gp fund ) 2 centering oil 3 plastic cover block 4 r.c.c.jali 50mm thick 5 plastizer ( rheobuild ) 825 rmt. 6 concrete spacer block 15 mm 7 concrete spacer block 20 mm 8 concrete spacer block 25 mm 9 concrete spacer block 30 / 40 mm 10 anticorrrisive primer coat 11 swaling coat 12 pvc coated gi wire 13 repairs to cut ends and damages with special liquid epoxy 14 epoxy paint 15 r.c.c.jali 80mm thick 16 bricks ( red ) 17 aac block 600x200x100 mm 18 jointing mortar 19 fly ash bricks 20 corner stone 38*20*30cm 21 khandakies 22 pin header ( standard size ) 23 hollow blocks c.c.0.2*0.2*0.4m 24 hollow blocks c.c.0.1*0.2*0.4m 25 hollow block c c 0.30 x 0.20 x 0.15 26 siporex block 75x240x650 mm 27 gbp build fast plus 28 siporex block 100x240x650 mm 29 siporex block 200x240x650 mm 30 bitumen ( compound ) 31 brick bats 32 water proof compound i.s 33 tar felt b.h.i.s.i.3mm thick 34 acrylic polymer modified waterproofing powder 35 acrylic polymer modified liquid 36 fibre glass mesh 37 bitumen 85 / 25 grade 38 bitumen 85 / 25 grade cold primer 39 grit ( add below 5.6 ) 40 bitumen felt 41 polydee tp40 primer 42 polydee tp40 primer 43 polydee lm 44 polydee lm 150mm width 45 bituflex cloesdcell foam 30x30 mm 46 ag 10 granules 47 polydee mc 48 polydee 41 sealant and polyseal 49 polydee 11 50 bitumen pad 25mm thick 1.20 x 1.20 mtr 51 neeru / sanala 52 white putty ( cement ) 53 texture material 54 rough shahabad 25 to 30mm thick 55 rough shahabad 40 to 45 mm thick 56 polished shahabad 25 to 30mm thick 57 rough shahabad 50 to 60mm thick 58 polished shahabad 40 to 50mm thick for step 59 polished shahabad machine cut 25mm thick 60 polished shahabad for step25mm thick 61 tandoor polished 25mm thick ( machine cut ) 62 tandoor polished 25mm thick ( hand cut ) 63 tandoor polished for steps25mm thisk 64 black kadappa ( one side polish ) ( machine cut ) 25 mm thick 65 black kadappa ( one side polish ) ( machine cut ) 35mm thick 66 both sides polished kadappastone 25mm thick 67 kota stone ( machine cut ) upto 25 30mm thick one side polished 68 kota stone ( hand cut ) upto 25 30mm thick one side polished 69 kota stone for step polished ) upto 25mm thick ( 1.2*0.3m ) 70 ceramic tiles 30*30cm 71 ceramic antiskid flooring tiles 30 x 30 cm 72 ceramic tiles for dado 30 cm x 30 cm 73 ceramic tiles for dado 30 x 45 cm 74 heavy duty interlocking concrete block 60mm thick gray 300 kg / sq.cm. 75 heavy duty interlocking concrete block 60mm thick coloured 300kg / sq.cm 76 heavy duty interlocking concrete block 80mm thick gray 300kg / sq.cm 77 heavy duty interlocking concrete block 80mm thick coloured 300kg / sq.cm 78 heavy duty interlocking concrete block 80mm thick rubber mould glossy 400kg / sq.cm 79 heavy duty interlocking concrete block 40mm thick colour 200 kg / sq.cm 80 telephone black granite 81 green marble 82 vitrified tiles glossy size 590 to 605 mm* 590 to 605 mm*8 to 10mm 83 vitrifiedmatt finish size 590 to 605 mm* 590 to 605 mm *8 to 10mm 84 vitrified rustic matt stone finish size 590 to 605mm *590 to 605mm*8 to 10mm 85 vertified stone effect finish size 590 to 605mm* 590 to 605mm * 8 to 10mm 86 calcet powder 87 black oxide powder 88 fevi matt chemical 10 kg bag 89 marble chips 90 heavy duty interlocking concrete block 60mm thick rubber mould glossy 400kg / sq.cm 91 tremix treatment 100 mm thick 92 marble mosaic chequered tiles ( gray ) 93 colour cement 94 heavy duty designer come. tile for flooring 95 heavy duty designer come. tile for steps 96 pvc flooring 97 ceramic tiles for dado 30 x 60 cm 98 marble ( other than white makrana ) 99 kota stone ( hand cut ) upto 45 55mm thick one side polished 100 vitrifiedmatt finish size 895 to 900 mm* 895 to 900 mm *10 to 12 mm 101 bees wax 102 coal tar 103 common spirit 104 french polish 105 varnish 106 malemaine polish 107 c.c.t.w. ballies 125 mm diameter 108 oil enamel paint / flat / glossy paint ( ready mix ) ( with i.s.i. mark ) 109 synthetic paint ( ready mix ) 110 catonic emulsion paint 111 white oil paint 100ml pack tin 112 red oxide paint 113 cement paint 114 steel primer 115 primer for plaster surface 116 putty 117 boiled linseed oil 118 linseed oil double boiled 119 terpentine 120 wood primer 121 brush for lettring 122 brush for road marking 5cm 123 brush for marking road 8cm 124 brush for road marking 10cm 125 lustre paint 126 textured synthetic paint 127 white lead paint 128 birla wall care putty 129 aluminium paint 130 plastic emulsion paint 131 acraylic emulsion paint 132 exterior primer 133 weather shield paint 134 neel 135 oil bound distemper 136 red powder / geru 137 saras 138 scrapping sand paper size ( 30 * 20cm ) 139 dry distemper 140 chunam / white lime powder 141 paint luster paint 142 roller brush 143 royale luxury emulsion paint 144 country teak wood 145 ghana teak wood 146 teak wood planks above 2.5 m length 147 teak wood bidding 1 / 2 * 1 / 2 148 t.w.balli 100 mm dia 149 jungle wood ( non teak ) normal 150 bamboo 25mm dia. ( 4.5 to 6m ) 151 bamboo 50mm dia. 152 bamboo matting 1.2*1.8m 153 ply wood 12mm thick 154 ply wood 6mm thick 155 mica laminate as per isi 0.1 mm thick 156 face veneel board 4 mm thick 157 particle board b.w.p.phinol bond 12mm thick 158 particle board b.w.p.phinol bond 19 mm thick 159 formica 1.5 mm thick 160 tower bolt brass oxidised 10 mm dia length 150 mm 161 ferical 162 ply wood 18mm thick commercial 163 teak wood battens 50 * 25mm 164 teak wood batten 25 mm * 12 mm 165 veneer 3.5 to 4 mm thick 166 alluminium rod 25mm dia 167 a.c.corrugated sheet 6mm thick 168 a.c.sheet ridge 169 a.c.sheet plain 4mm thick 170 g.c.i. sheet ( corrugated ) 22 bwg 171 g.c.i. sheet ( corrugated ) 24 bwg 172 g.i. sheet ( plain ) 22 bwg 173 g.i. sheet ( plain ) 24 bwg 174 g.i.washers 175 g.i. j or l hooks 6 mm dia. 176 nails iron all size 177 mangalore tiles class aa 178 mangalore ridge / hip tiles 179 mangalore glass tiles 180 mangalore pattern cowl ventilator 181 g.i. pre coated trapezoidal 0.50 mm thick roof metalic coloured sheet 182 g.i. pre coated ridge sheet 183 gypsum powder 184 aluminium alloy plate 2mm thick 185 aluminium sheeting fixed with encapsuled lens type reflective sheeting including 2% towards lettering , cost of angle iron, cost of drilling holes , nuts, bolts etc. and signs as applicable. 186 plaster of paris 187 decorative board of fibrous plaster of paris 12 to 15 mm 188 acoustic board 12 mm thick 189 gypsum board 12.5 mm thick 190 upvc 3 layer trapezoidal 2.00 mm sheet 191 light weight calcium silicate tile of size 595 x 595 mm of texture spin stone / cosmos / plain / glode fine fissured. 192 bioguard board 16 mm 193 ultima tile 194 optra tile 195 proflex sheet 1 mm 196 sky light 2 mm thick 197 hanger rod 4mm thick 198 level adjustment clip size 85x30x0.8mm 199 dash fastener 12.5mm dia 50mm long 200 soffit cleat 25mmx35mmx1.60mm 201 wooden screws with plastic rawl plugs 35mmx8mm 202 light weight calcium silicate tiles of size 595x595mm of texture spintone for tegular edge ceiling 203 plain zinc sheet 204 upvc ridge / hip tiles 205 hanger wire ( 2.68 mm dia ) , 1.82 m long 206 dune edge tiles 207 fine fissured edge tiles 208 turbo ventilator 24 209 tarat 36 width ( gunny cloth ) 210 wire glass 211 fire wood 212 precoated galvanised steel plain sheet 213 connecting clip for supports 214 dry wall screws 25 mm 215 jointing compound 216 jointing tape 217 minaral fibre board 600 x 600 mm 218 perimeter channel 80 x 8 mm 219 screws 1 12 220 screws 1 / 2 221 rawal plug 222 plain zinc sheet 0.50 mm thick 223 aldrop 300*16mm chromium plated 224 aldrop iron oxidise 300*16mm 225 aldrop stainless steel 300*16mm 226 handle 125mm m.s. chromium plated 227 handle 150mm brass chromium plated ( rounded shape ) 228 handle alluminium 125 mm 229 iron hinges chromium plated 125mm 230 but hinges alluminium 125mm 231 g.i.screw 50mm 232 g.i.screw 25mm 233 stainless steel hinges 125mm 14 gauge ( heavy duty ) 234 tower bolt aluminium 10mm dia.length 250mm 235 tower bolt aluminium 10mm dia.length 200mm 236 tower bolt m.s. chromium plated 10mm dia, length 300mm 237 tower bolt m.s. chromium plated 10mm dia, length 200mm 238 cold rolled steel hollow section door frame 1829*610mm 239 aluminium stay 25cm 240 aluminium stay 30cm 241 jali fly proof 242 jali chicken mesh 243 jali welded mesh 25*25* 13 guage 244 jali welded mesh 25*25* 11 guage 245 jali welded mesh 50*25 13 guage 246 jali welded mesh 50*25 11 guage 247 hold fast iron 300*40*5mm 248 sliding door bolt stainless steel 12mm dia. 250mm length 249 glass plain 3mm 250 glass plain 5mm 251 glass obscured ( bajara ) 5mm 252 g.i. nut bolt 253 housing box to rolling shutter 254 mechanical gear for rolling shutter 255 mortice lock superior 256 solid core commercial shutter 30mm thick phenol bonded with face veneer 3 mm thick both side 257 iron washer 12mm to 16mm 258 aluminium section 259 nylon / pvc gasket 260 alluminium screw 32 x 6 mm, 25 x 6 mm 261 concealed locking arrangement of 100 mm length for sliding window 262 alluminium grill 7.50 mm thick 263 hydraulic floor spring heavy duty ( 150 kg capacity ) isi mark 264 iron oxidized sliding door bolt 200 mm length, 12 mm dia 265 powder and chemicals for colour anodizing process of alluminium sections 266 lock for sliding shutter 267 all bearing roller 268 all frame rail angle 269 welding electrodes 270 c.r.c. sheet 271 abstrone butadyne styrine ( abs ) door shutter including transportation 272 puff insulation 35 40 kg / cumt. density 273 pvc door shutter 34 mm thick factory made shutter 274 frp door shutter 30 mm thick factory made shutter 275 frp door shutter 35 mm thick factory made shutter 276 bison pannel 277 pvc factory made solid panel door shutter with stainless steel fixutres & fastening 278 pvc factory made flush door 30 mm with stainless steel fixutres & fastening 279 sliding door bolt chromium plated 250mm 280 acrylic plain sheet 3 mm 281 aldrop stainless steel 300*16mm 282 aldrop stainless steel 250*16 mm 283 handle 150mm stainless steel ( rounded shape ) 284 handle 200mm stainless steel ( rounded shape ) 285 stainless steel hinges 100mm 14 gauge ( heavy duty ) 286 stainless steel hinges 125mm 14 gauge ( heavy duty ) 287 housing box to rolling shutter 288 mechanical gear for rolling shutter 289 door stopperstainless steel 290 tower bolt stainless steel 200 mm 291 tower bolt stainless steel 250 mm 292 sliding door bolt stainless steel 250 mm 293 handle stainless steel 100 mm 294 eye hole lens 295 rolling shutter 296 ply wood 297 stainless steel hooks and eyes 200 mm 298 steel window 299 powder coating 300 rubber lining 301 ply wood 9 mm thick 302 laminated board double 12mm thick 303 alluminium section anodized 304 handle iron oxidised 150 mm 305 hinges iron oxidised 100 mm 306 t. w. particle board, both face laminated 12 mm 307 battens t.w. 70 x 45 mm 308 nuts and bolts 309 plain frp sheet 22 b.w.g. 310 tw runner ( 6 x 3 ) 311 alluminium screw 312 f patti 313 teak wood planks above 2.5m length 314 vision panel 315 solid core shutter 35 mm thick with commercial veneer facing and phenol bonded 316 oil paint 317 acrylic plain sheet 2 mm thick 318 aluminium sheet 24 b.w.g 319 alluminium section with powder coating 320 concealed lock 321 mosquito proof nylone net 322 solid core commercial shutter 30mm thick phenol bonded with face veneer 3 mm thick both side with bidding patty 323 g.i. pipe 100mm dia. medium type 324 g.i. pipe 100mm dia. heavy type 325 g.i. pipe 15mm dia. medium type 326 g.i. pipe 15mm dia. heavy type 327 g.i. pipe 20mm dia. medium type 328 g.i. pipe 20mm dia.heavy type 329 g.i. pipe 25mm dia. medium type 330 g.i. pipe 25mm dia. heavy type 331 g.i. pipe 32mm dia. medium type 332 g.i. pipe 32mm dia.heavy type 333 g.i. pipe 40mm dia. medium type 334 g.i. pipe 40mm dia. heavy type 335 g.i. pipe 50mm dia. medium type 336 g.i. pipe 50mm dia. heavy type 337 g.i. pipe 65mm dia. medium type 338 g.i. pipe 65mm dia. heavy type 339 g.i. pipe 80mm dia. medium type 340 g.i. pipe 80mm dia. heavy type 341 pvc nahani trap 75 mm 342 g.i.clamps 100mm to 150mm 343 pvc nahani trap 150 mm 344 g.i.clamps 12mm to 32mm 345 g.i.clamps 40mm to 80mm 346 anglo indian w.c. pan colour 347 g.i.fixtures 348 p.v.c. cowl 100 mm 349 g.i.screws 30mm 350 g.i.screws 40mm 351 g.i.union 25mm dia. 352 gully trap cover with frame 353 gun metal stop tap with crutch wheel 20mm 354 gun metal stop tap with crutch wheel 25mm 355 gun metal stop tap with crutch wheel 15mm 356 gun metal stop tap with crutch wheel 20mm 357 c.i.bend 75mm dia. 358 c.i.bend 100mm dia. 359 c.i.bip tap 12mm 360 c.i.grating 150mm dia. 361 c.i.grating 100mm dia. 362 c.i.grating 75mm dia. 363 c.i.brackets 364 c.i.collers 100mm dia. 365 c.i.copllers 75mm dia. 366 c.i.cover 45*30 cm with frame 367 c.i.cowl / vent 100mm dia. 368 c.i.cowl / vent 150mm dia. 369 c.i.cowl / vent 75mm dia. 370 c.i.hinged cover with frame 371 c.i.man hole cover 50 kg. 372 c.i.man hole cover 75 kg. 373 c.i.man hole cover 100 kg. 374 c.i.man hole cover 175 kg.heavy ( 0.9*0.45m ) 375 c.i.nahani trap 100mm dia. ( 375mm long ) 376 c.i.nahani trap 75 to 80mm dia. ( 375mm long ) 377 c.i.100*75*300 long arm ( wt. 6kg ) nahani trap 378 c.i.soil pipe 100mm dia. 379 c.i.soil pipe 150mm dia. 380 c.i, soil pipe 75 to 80mm dia. 381 c.i.shoe 75 mm dia. 382 c.i. shoe 100 mm dia. 383 c.i.shoe 150mm 384 ball cock 15mm dia.p.v.c.float 385 ball cock 25mm dia.p.v.c.float 386 ball cock 40mm dia.p.v.c.float 387 ball cock 50mm dia.p.v.c.float 388 bib cock stop tap brass heavy 15mm 389 bib cock stop tap brass heavy 20mm 390 bib cockstop tap brass heavy 25mm 391 bib tap 12mm brass medium 392 colour wash hand basin 55*40cm 393 colour wash hand basin 63*45cm 394 white glazed wash basin 45*30cm 395 white glazed wash hand basin 55*50cm 396 p.v.c. flexible waste pipe 32 mm dia 397 white glazed wash hand basin 63 x 45 cm 398 sink white glazed 45*20*30cm 399 pedestal for wash basin ( standard size ) 400 c.c.septic tank 0.9m dia. ( 2.5m long ) 401 c.c.septic tank 1.20m dia. ( 2.5m long ) 402 c.i.steps for manhole 403 c.i.cover with frame ( gully trap ) 404 c.i.plug bend 150mm dia. 405 clamp for g.i.pipe 25mm 406 colour european type w.c.pan 407 european type glazed w.c.pan 408 w.c.pan coloured glazed 64cm. ( orissa ) 409 w.c.pan white glazed 58 cm.indian 410 w.c.pan white glazed 57.50 cm ( orissa ) 411 fibre flushing tank for w.c. 412 flushing tank automatic urinal 10ltr. c.i. 413 flushing tank automatic urinal 5ltr. ( p.v.c. ) 414 low level flush pr. st. 10ltr. 415 flat back urinal 416 stall type urinal 417 lipped type urinal 418 coloured glazed full stall urinal 419 bleaching powder 420 potassium permanganate 421 nylon brush 422 duster 423 plastic bucket 424 coir 425 gunny cloth 426 kharata 427 wheel stop tap brass 15mm 428 wheel stop tap brass 20mm 429 wheel stop tap brass 25mm 430 socket brass for 32mm tap 431 socket brass for 40mm tap 432 socket brass for 50mm tap 433 socket brass for 65mm tap 434 socket for 100mm tap 435 socket for 15mm tap 436 socket for 20mm tap 437 socket for 25mm tap 438 socket for 32mm tap 439 socket for 40mm tap 440 socket for 50mm tap 441 socket for 65mm tap 442 socket for 80mm tap 443 span yarn 444 strainer for 100mm 445 strainer for 40mm 446 strainer for 50mm 447 strainer for 80mm 448 strainer for 15mm 449 strainer for 20mm 450 strainer for 25mm 451 stone ware pipe 100mm dia. 452 stone ware pipe 150mm dia. 453 stone ware pipe 225mm dia. 454 stone ware glazed pipe half round 100mm dia. 455 stop tap brass with crunch wheel 15mm dia. 456 towel rod with clamps 16mm dia. 457 mirror 40*50cm. with plastic frame 458 brass t thimble socket 32mm dia. 459 brass wheel stop tap 32mm dia. 460 brass wheel stop tap 40mm dia. 461 brass wheel stop tap 50mm dia. 462 brass wheel stop tap 65mm dia. 463 brass wheel stop tap 80mm dia. 464 half turn flush cock 25mm dia. 465 12mm flexible inlet pipe connection 466 bell mouth cover 100mm dia. 467 box chamber with lock 0.6*0.45m 468 brass nozzle pillar tap 12mm 469 black bakelite seat to european closer 470 concussion push button type gun metal tap 15 to 25mm dia. 471 coupling cast iron 100mm dia. 472 coupling cast iron 80mm dia. 473 chromium plated 12mm dia.bib cock 474 c.i.trap grating 15*10 cm 475 c.i.y junction 100mm dia. 476 c.i.y junction 150mm dia. 477 c.i.y junction 75mm dia. 478 enameled bend 40mm dia. 479 ferrul for c.i.pipr 100mm 480 white glazed foot rest chequred 25*10 cm 481 half round earthware pipe 100mm ( 60cm long ) 482 half round earthware pipe 150mm ( 60cm long ) 483 jute rope 484 half round chaina ware pipe 100mm ( 60cm long ) 485 lead pipe 32mm dia. 486 mohagani seat with lid 487 mosquito proof coupling 488 non return valve 15mm for water meter 489 non return valve 25mm for water meter 490 non return valve 20mm for water meter 491 piller tap 12mm dia.chromium plated heavy 492 p.trap and lead pipe upto 40mm dia. 493 rubber gasket ( 25, 28 and 20 cm ) 494 rubber incertion 495 rubberised adhesive 496 salt glazed stone ware gully trap ( 150*150mm ) 497 self project tap brass chromium plated 15mm 498 sewer trap 499 shower rose chromium plated brass 10cm 500 p.v.c. pipe 15mm dia.10kg / cm2 pressure ( class iv ) 501 p.v.c. pipe 20mm dia.10kg / cm2 pressure ( class iv ) 502 p.v.c. pipe 25mm dia.10kg / cm2 pressure ( class iv ) 503 p.v.c. pipe 32mm dia.10kg / cm2 pressure ( class iv ) 504 p.v.c. pipe 40mm dia.10kg / cm2 pressure ( class iv ) 505 p.v.c. pipe 50mm dia.10kg / cm2 pressure ( class iv ) 506 p.v.c. pipe 60mm dia.10kg / cm2 pressure ( class iv ) 507 p.v.c. pipe 75mm dia.4 kg / cm2 pressure ( class ii ) 508 p.v.c. 75 mm soil pipe 6 kg / cm2 pressure 509 p.v.c. pipe 90mm dia.4 kg / cm2 pressure ( class ii ) 510 p.v.c.pipe 110mm dia.4kg / cm2 pressure ( class ii ) 511 p.v.c. 110 mm rain water pipe 6kg / cm2 pressure 512 p.v.c. 110 mm soil pipe 6 kg / cm2 pressure 513 p.v.c.pipe 140mm dia.4kg / cm2 pressure ( class ii ) 514 p.v.c.pipe 160mm dia.4kg / cm2 pressure ( class ii ) 515 p.v.c.pipe 160mm dia.soil pipe 516 p.v.c.pipe 160mm dia. rain water pipe 517 p.v.c.socket 15mm dia. 518 p.v.c.socket 20mm dia. 519 p.v.c.socket 25mm dia. 520 p.v.c.socket 32mm dia. 521 p.v.c.socket 40mm dia. 522 p.v.c.socket 50mm dia. 523 p.v.c.socket 60mm dia. 524 p.v.c.flushing tank ( 12 ltr. capacity ) 525 flush valve 32mm dia. 526 ferocret tank 527 stainless steel sink of size 600*510*200mmof nirali or equivalent make 528 c.p.pillar cock jaquar make continental ( cat.no. con 011 ) 529 c.p.pillar cock ( isi ) jaquar make continental 530 c.p.pillar cock long neck with aerator jaquar make continental ( cat.no. con 021 ) 531 c.p.bib cock ( isi ) jaquar make continental ( cat.no. con 037 ) 532 c.p.bib cock long thread jaquar make continental ( cat.no. con 039 ) 533 c.p.2 way bib cock jaquar make continental ( cat.no. con 041 ) 534 c.p.bib cock with wall flange long thread jaquar make continental ( cat.no. con 047 ) 535 c.p.bib cock with nozzle jaquar make continental ( cat.no. con 049 ) 536 c.p.angular stop cockjaquar make continental ( cat.no. con 053 ) 537 c.p.angular stop cock long thread jaquar make continental ( cat.no. con 055 ) 538 c.p.angular stop cock with wall flange jaquar make continental ( cat.no. con 059 ) 539 c.p.central hole basin mixer without popup waste system with 450mm long braided hoses jaquar make continental ( cat.no. con 167b ) 540 c.p.wall mixer with telephone shower arragnementonly but without teltphone shower crutch jaquar make continental ( cat.no. con 217 ) 541 c.p.wall mixer non telephonic shower arrangement jaquar make continental ( cat.no. con 219 ) 542 c.p.wall mixer ( wall mounted model ) with telephone shower arrangement only and with telephone shower crutch jaquar make continental ( cat.no. con 267 ) 543 c.p.wall mixer with provision for overheadshower with 115mm long bend pipe and wall flange jaquar make continental ( cat.no. con 273upr ) 544 c.p.sink mixer with swinging casted spout ( wallmounted ) jaquar make continental ( cat.no. con 309 ) 545 c.p.sink mixer swinging spout ( table mounted model ) 450mm long braided hoses jaquar make continental ( cat.no. con 309b ) 546 c.p.sink cock with swinging casted spout jaquar make continental ( cat.no. con 347 ) 547 c.p.sink cock with raised j shaped swinging casted spout ( table mounted ) jaquar make continental ( cat.no. con 359 ) 548 c.p.shower arm 190mm long light body with wallflange jaquar make continental ( cat. no. sha 477 ) 549 c.p.flush cock with wall flange 25mm with plain knob jaquar make continental ( cat.no. flr 6081 ) 550 c.p.towel rail 24 jaquar make continental ( cat. no. acn 1111n ) 551 c.p.towel ring square jaquar make continental ( cat. no. acn 1121n ) 552 c.p.soap dish hooker jaquar make continental ( cat. no. akb 35731 ) 553 c.p.soap dish ( polyurethane ) jaquar make continental ( cat. no. aqn 7733 ) 554 c.p.toilet paper holder jaquar make continental ( cat. no. aq 7751 ) 555 c.p.toilet rack 24with lower hanger jaquar make continental ( cat. no. acn 1181n ) 556 c.p.handshower ( health faucet ) 1m.pvc tube with wall hook jaquar make ( cat. no. ald 563 ) 557 c.p.pillar cock jaquar make queens collection ( quarter turn fitting ) ( cat. no. qqt 7011 ) 558 c.p.bib cock with wall flange aqua make queens collection ( quarter turn fitting ) ( cat. no. qqt7037 ) 559 c.p.2 way bib cock with wall flange aqua make queens collection ( quarter turn fitting ) ( cat. no. qqt 7041 ) 560 c.p.angular stop cock with wall flange aqua make queens collection ( quarter turn fitting ) ( cat. no. qqt 7053 ) 561 c.p.central hole basin mixer with regular spout without popup waste system with 450mm longbraided hoses jaquar make queens collection ( quarter turn fitting ) ( cat. no. qqt 7167bb ) 562 c.p.central hole basin mixer with regular spout with popup waste system with 450mm longbraided hoses jaquar make queens collection ( quarter turn fitting ) ( cat. no. qqt 7169b ) 563 c.p.central hole basin mixer with small spout without popup waste system with 450mm longbraided hoses jaquar make queens collection ( quarter turn fitting ) ( cat. no. qqt 7171b ) 564 c.p.wall mixer ( wall mounted model ) with telephonic shower arrangement only but without crutchjaquar make queens collection ( quarter turn filling ) ( cat. no. qqt 7217 ) 565 c.p.wall mixer non telephonic shower system jaquar make queens collection ( quarter turn filling ) ( cat. no. qqt 7219 ) 566 c.p.wall mixer ( wall mounted model ) with telephonic shower arrangement only and with telephone shower crutch jaquar make queens collection ( quarter turn filling ) ( cat. no. qqt 7267 ) 567 hydraulic door closer 568 cpvc pipe 15mm dia. 569 cpvc pipe 20mm dia. 570 cpvc pipe 25mm dia. 571 cpvc pipe 32mm dia. 572 cpvc pipe 40mm dia. 573 cpvc pipe 50mm dia. 574 cpvc coupling for 15mm dia. 575 cpvc coupling for 20mm dia. 576 cpvc coupling for 25mm dia. 577 cpvc coupling for 32mm dia. 578 cpvc coupling for 40mm dia. 579 cpvc coupling for 50mm dia. 580 elbow 90 degree for 15mm dia. 581 elbow 90 degree for 20mm dia. 582 elbow 90 degree for 25mm dia. 583 elbow 90 degree for 32mm dia. 584 elbow 90 degree for 40mm dia. 585 elbow 90 degree for 50mm dia. 586 tee for 15mm dia. 587 tee for 20mm dia. 588 tee for 25mm dia. 589 tee for 32mm dia. 590 tee for 40mm dia. 591 tee for 50mm dia. 592 end cap for 15mm dia. 593 end cap for 20mm dia. 594 end cap for 25mm dia. 595 end cap for 32mm dia. 596 end cap for 40mm dia. 597 end cap for 50mm dia. 598 ball cock for 15mm dia. 599 ball cock for 12mm dia. 600 ball cock for 25mm dia. 601 ball cock for 32mm dia. 602 ball cock for 40mm dia. 603 araldite adhesive 604 ball valves for 50mm dia. 605 male adapter ( brass threads ) for 15mm dia. 606 male adapter ( brass threads ) for 20mm dia. 607 male adapter ( brass threads ) for 25mm dia. 608 male adapter ( brass threads ) for 32mm dia. 609 male adapter ( brass threads ) for 40mm dia. 610 male adapter ( brass threads ) for 50mm dia. 611 male adapter ( plastic threads ) for 15mm dia. 612 male adapter ( plastic threads ) for 20mm dia. 613 male adapter ( plastic threads ) for 25mm dia. 614 male adapter ( plastic threads ) for 32mm dia. 615 male adapter ( plastic threads ) for 40mm dia. 616 male adapter ( plastic threads ) for 50mm dia. 617 female adapter ( brass threads ) for 15mm dia. 618 female adapter ( brass threads ) for 20mm dia. 619 female adapter ( brass threads ) for 25mm dia. 620 female adapter ( brass threads ) for 32mm dia. 621 female adapter ( brass threads ) for 40mm dia. 622 female adapter ( brass threads ) for 50mm dia. 623 female adapter ( plastic threads ) for 15mm dia. 624 female adapter ( plastic threads ) for 20mm dia. 625 female adapter ( plastic threads ) for 25mm dia. 626 union for 15mm dia. 627 union for 20mm dia. 628 union for 25mm dia. 629 union for 32mm dia. 630 union for 40mm dia. 631 union for 50mm dia. 632 cross for 15mm dia. 633 cross for 20mm dia. 634 step over bend 15mm dia. 635 step over bend 20mm dia. 636 tee holder for 15mm dia. 637 tee holder for 32mm dia. 638 end plug threaded for 15mm dia. 639 r.c.c.chamber cover with frame 90cm*45cm heavy duty 225kg 640 r.c.c.chamber cover with frame 90cm*45cm medium duty 140kg 641 r.c.c.chamber cover with frame 60cm*45cm heavy duty 160kg 642 r.c.c.chamber cover with frame 60cm*45cm medium duty 100kg 643 i.s.i.ferrul connection15mm dia. 644 i.s.i.ferrul connection 20mm dia. 645 i.s.i.ferrul connection 25mm dia. 646 i.s.i.ferrul connection 32mm dia. 647 i.s.i.ferrul connection 40mm dia. 648 i.s.i.ferrul connection 50mm dia. 649 water meter 15 mm diameter 650 water meter 20 mm diameter 651 water meter 25 mm diameter 652 water meter 40 mm diameter 653 water meter 50 mm diameter 654 water meter 80 mm diameter 655 water meter 100 mm diameter 656 non return valve 40 mm diameter 657 non return valve 50 mm diameter 658 non return valve 80 mm diameter 659 non return valve 100 mm diameter 660 colour wash hand basin 0.45 x 0.30 661 white glaze earth sink 0.6 x 0.2 x 0.45 662 clamp for g.i.pipe 200mm 663 earopean type glazed w.c.pan 68cm 664 earopean white glazed earthen ware closet pan 665 p.v.c. nahni trap 666 p.v.c. connector. 15 mm dia 667 low level flushing cistern 668 upvc sanitary pipes all 20 mm dia. 669 upvc sanitary pipes all 75 mm dia. 670 bib cock stop tap brass heavy 15mm 671 stainless steel sink of size 610 x 460 x 200 mm of nirali or equivalent make 672 upvc sanitary pipes all 63 mm dia. 673 w.c.pan colour glazed 57.50 cm ( orissa ) 674 piller cock mixer & angle cock 675 upvc sanitary pipes all 25 mm dia. 676 upvc sanitary pipes all 15 mm dia. 677 cement 678 upvc sanitary pipes all 40 mm dia. 679 upvc sanitary pipes all 50 mm dia. 680 stainless steel sink of size 470 x 420 x 178 mm of nirali or equivalent make 681 bib cock long arm 682 bottletrap wash basin 32 mm cromium plated 683 upvc sanitary pipes all 32 mm dia. 684 hamp rope 685 bib cock cock stop tap brass heavy 15 mm 686 colour wash hand basin 45*30cm 687 ultra 250 mm. dia. upvc 90 degree junction chamber base with u trap 688 ultra 250 mm.dia. upvccover & frame 689 upvc blanking plug 110 mm 690 upvc 90 degree bend 691 ultra shaft 250x470mm 692 water jet with accessories 693 white glazed full stall urinal 694 glass plain 6mm thick 695 white glazed earthenware squatting plate ( ladies urinal ) 696 autoclosing pillar cock of pressmatic tap 697 pvc aqua kraft type super bib tap 15 mm 698 pvc aqua kraft type super two way bib tap 15 mm 699 super push button type cock / tap with flange 15 mm 700 pvc aqua kraft type super jet spray 15 mm 701 pvc aqua kraft type super right angle stop tap 702 pvc aqua kraft type super pillar tap 15 mm 703 fixing in cc bk clamp, battan 704 wall mounted european type glazed w.c.pan 705 super wall sink type tap with flange 15 mm 706 two way bib tap with flange 707 super jet spray with flange 2 in 1 faucet 1.50 metre long 708 chloryphyriphos 709 solvent 710 d.d.v.p. 711 malathion 712 pine oil 713 s.s. pipe 40 mm dia 714 mild steel 715 barbed wire 716 concentina coil wire 717 m.s.steel 718 rcc pole 719 green marble 720 telephone black granite 721 karva ( for roof and sides 10kg bundle ) 722 tatti 723 bamboo 25mm dia. 724 lightening conductor 725 salt 726 copper tape width 25mm*3mm thick 727 aluminium strips 50 mm x 3 mm 728 cripped wire3 0 , 4 0 and 5 0 wide 729 welding electrodes 730 welded mesh 75 x 75 mm 731 welded mesh 150 x 150 mm 732 tarat 36 width ( gunny cloth ) 733 chain link3 0 , 4 0 and 5 0 wide 734 bamboo 50mm dia. 735 hold fast for steel gate 736 nut boldts 12 mm dia. / nails all size 737 m.s. pipe 40 mm dia 738 welding rod 739 pvc hand rail cover 740 antitermite liquid 741 lock for drawer / cupboard 742 glycel 743 hing 744 hot lime 745 ladder 746 fine tooth chisel 747 saw 748 gloves 749 r.c.c.pipe 1200mm dia. ( np3 ) 2.5m long 750 r.c.c.pipe 1100mm dia. ( np3 ) 2.5m long 751 r.c.c.pipe 1000mm dia. ( np3 ) 2.5m long 752 r.c.c.pipe 900mm dia. ( np3 ) 2.5m long 753 r.c.c.pipe 800mm dia. ( np3 ) 2.5m long 754 r.c.c.pipe 700mm dia. ( np3 ) 2.5m long 755 r.c.c.pipe 600mm dia. ( np3 ) 2.5m long 756 r.c.c.pipe 500mm dia. ( np3 ) 2.5m long 757 r.c.c.pipe 450mm dia. ( np3 ) 2.5m long 758 r.c.c.pipe np2 class 1000mm dia. 2.5m long 759 r.c.c.np2 pipe collar 1000 mm dia. 760 r.c.c.pipe np2 class 1200mm dia. 2.5m long 761 r.c.c.np2 pipe collar 1200 mm dia. 762 r.c.c.pipe np2 class 1800mm dia. 2.5m long 763 r.c.c.pipe np2 class 900mm dia. 2.5m long 764 r.c.c.np2 pipe collar 900 mm dia. 765 r.c.c.pipe np2 class 800mm dia. 2.5m long 766 r.c.c.np2 pipe collar 800 mm dia. 767 r.c.c.pipe np2 class 700mm dia. 2.5m long 768 r.c.c.pipe np2 class 600mm dia. 2.5m long 769 r.c.c.np2 pipe collar 600 mm dia. 770 r.c.c.pipe np2 class 500mm dia. 2.5m long 771 r.c.c.pipe np2 class 450mm dia. 2.5m long 772 r.c.c.np2 pipe collar 450 mm dia. 773 r.c.c.pipe np2 class 100mm dia. 2m long 774 r.c.c.pipe np2 class 150mm dia. 2m long 775 r.c.c.pipe np2 class 225mm dia. 2m long 776 r.c.c.pipe np2 class 300mm dia. 2m long 777 rcc pipe np 4 heavy duty non presure pipe 1000 mm diameter 778 rcc pipe np4 heavy duty non presure pipe 1200 mm diameter 779 rcc pipe np4 heavy duty non presure pipe 900 mm diameter 780 cement 781 structural steel 782 tmt fe 500 783 hcrm / crs reinforcement 784 bitumen vg 10 ( bulk ) ( 80 / 100 ) 785 bitumen vg 30 ( bulk ) ( 60 / 70 ) 786 bitumen vg 40 ( bulk ) ( 30 / 40 ) 787 bitumen vg 30 ( packed ) ( 60 / 70 ) 788 bitumen vg 40 ( packed ) ( 30 / 40 ) 789 bitumen vg 10 ( packed ) ( 80 / 100 ) 790 sand natural / v.s.i. ( vertical shaft impact crusher ) quality artifitial sand 791 sand crushed 792 natural sand screened ( for plaster work only ) 793 bricks ii class 794 rubble stone excluding royalty 795 aggregate 40 mm ( hand broken ) blasted excluding royalty 796 aggregate 25 mm 797 aggregate 20 mm 798 aggregate 12 mm 799 aggregate 10 mm 800 aggregate 6 mm 801 stone dust 802 soft murum 803 hard murum 804 water 805 white cement 806 plasticizer 807 stainless steel plate 808 emulsion rs1 ( hincol ) bulk 809 emulsion rs1 ( hincol ) packed 810 waste plastic to be used in bituminous treatment as per irc sp 098 2013 811 portland slag cement ( psc ) 812 ground granulated blast furnance slag ( ggbs ) 813 bitumen vg 40 ( bulk ( 30 40 grade ) ) 814 stone boulder of size 150 mm and below at cruser plant 815 supply of quarried stone 150 200 mm size for hand broken at site 816 boulder with minimum size of 300 mm for pitching at site 817 coarse sand at mixing plant 818 coarse sand at site 819 murum at site 820 fly ash conforming to is: 3812 ( part ii &i ) athmp plant / batching plant / crushing plant 821 filter media / filter material as per table 300 3 ( mort&h specification ) 822 close graded granular sub base material 53 mm to 9.5 mm 823 close graded granular sub base material37.5 mm to 9.5 mm 824 close graded granular sub base material26.5 mm to 9.5 mm 825 close graded granular sub base material9.5 mm to 4.75 mm 826 close graded granular sub base material9.5 mm to 2.36 mm 827 close graded granular sub base material 4.75mm to 2.36 mm 828 close graded granular sub base material 4.75mm to 75 micron mm 829 close graded granular sub base material2.36 mm 830 stone crusher dust finer than 3mm with not more than 10% passing 0.075 sieve. 831 coarse graded granular sub base material2.36 mm & below 832 coarse graded granular sub base material4.75mm to 75 micron mm 833 coarse graded granular sub base material4.75 mm to 2.36 mm 834 coarse graded granular sub base material 9.5 mm to 4.75 mm 835 coarse graded granular sub base material 26.5 mm to 4.75 mm 836 coarse graded granular sub base material 26.5 mm to 9.5 mm 837 coarse graded granular sub base material 37.5 mm to 9.5 mm 838 coarse graded granular sub base material 53 mm to 26 .5mm 839 aggregates below 5.6 mm 840 aggregates 22.4 mm to 2.36 mm 841 aggregates 22.4 mm to 5.6 mm 842 aggregates 45 mm to 2.8 mm 843 aggregates 45 mm to 22.4 mm 844 aggregates 53 mm to 2.8 mm 845 aggregates 53 mm to 22.4 mm 846 aggregates 63 mm to 2.8 mm 847 aggregates 63 mm to 45 mm 848 aggregates 90 mm to 45 mm 849 aggregates 10 mm to 5 mm 850 aggregates 11.2 mm to 0.09 mm 851 aggregates 13.2 mm to 0.09 mm 852 aggregates 13.2 mm to 5.6 mm 853 aggregates 13.2 mm to 10 mm 854 aggregates 20 mm to 10 mm 855 aggregates 25 mm to 10 mm 856 aggregates 19 mm to 6 mm 857 aggregates 37.5 mm to 19 mm 858 aggregates 37.5 mm to 25 mm 859 aggregates 6 mm nominal size 860 aggregates 10 mm nominal size 861 aggregates 13.2 / 12.5 mm nominal size 862 aggregates 20 mm nominal size 863 aggregates 25 mm nominal size 864 aggregates 40 mm nominal size 865 binding wire 866 bitumen ( cationic emulsion ) 867 bitumen vg 30 ( bulk ( 60 70 grade ) ) 868 bitumen vg 10 ( bulk ( 80 100 grade ) ) 869 bitumen ( cutback ) 870 bitumen ( emulsion ) 871 bitumen ( modified graded ) ( bulk cr 60 ) 872 geo grids 873 geomembrane 874 geonets 875 geotextile 876 geotextile filter fabric 877 ldo 878 pavement marking paint 879 rcc pipes 200 mm dia, 2.5 m long for drainage 880 quarry spall 881 road barricade perforated fench ( 2000 x 1000 x 40 mm ) 882 road barricade sand fillable only 1 mtr. [ 1000 ( l ) x 350 ( w ) x 760 ( h ) mm ] 883 polypropylene multifilament woven geotextile fabric for filter layer ( approved opening size 0.075mm & water permeability 9.00 litres / sqm / second ) 884 polythene bags 885 trap stones weighing upto 20 kilogram 886 trap stones weighing from 20 to 50 kilogram 887 trap stones weighing from 50 to 100 kilogram 888 trap stones weighing from 100 to 200 kilogram 889 trap stones weighing from 200 to 300 kilogram 890 trap stones weighing from 300 to 500 kilogram 891 trap stones weighing from 500 to 1000 kilogram 892 trap stones weighing from 1000 kilogram and above 893 laterite stones rubbles upto 20kilogram 894 laterite stones rubbles from 20 to 50 kilogram 895 laterite stones rubbles from 50 to 100 kilogram 896 gabions boxes of mechanically woven hexagonal shaped wire mesh of type, 10 cm x 12 cm. edges mechanically selvedged ( zinc+ pvc ) coated g.i. wires as per bs: 443, mesh wire dia. 3.00 mm, edge wire 3.70 mm size 897 a ) gabion size 1.00 x 1.00 x 1.00 m 898 b ) gabion size 1.50 x 1.00 x 1.00 m 899 c ) gabion size 2.00 x 1.00 x 1.00 m 900 d ) gabion size 3.00 x 1.00 x 1.00 m 901 e ) gabion size 4.00 x 1.00 x 1.00 m 902 flexible gabions of polypropylene material of 10 mm ø four strand mesh size of 150mm x 150 mm size 903 a ) gabion size 1.00 x 1.00 x 1.00 m 904 b ) gabion size 1.50 x 1.00 x 1.00 m 905 c ) gabion size 2.00 x 1.00 x 1.00 m 906 d ) gabion size 3.00 x 1.00 x 1.00 m 907 used tyre fender 908 geotextile bags of sizes 909 a ) geotextile bags size 1.00 x 0.70 m 910 b ) geotextile bags size 2.00 x 1.50 m 911 geotextile tube of 20 metre long & 912 a ) geotextile tube diameter 3.00 m 913 b ) geotextile tube diameter 1.50 m 914 black smith with tools ii class 915 stone cutter with tools semi skilled 916 mason i class skilled 917 mason ii class skilled 918 carpenter i class skilled 919 carpenter ii class skilled 920 plumber with tools skilled 921 glazier with tools skilled 922 tin smith with tools semi skilled 923 painter i class skilled 924 painter ii class skilled 925 head fitter with tools skilled 926 mechanic 927 lorry driver / mixer operator 928 welder / driller skilled 929 polishman semi skilled 930 assistant plumber skilled 931 maistry skilled / supervisor / mate 932 vibrator operator skilled 933 skilled labour 934 boreman skilled 935 asphalt sprayer skilled 936 minor or blaster semi skilled 937 quarry man semi skilled 938 painter / white washer semi skilled 939 labour for excavation in hard rock ( un blast ) 940 tile turner semi skilled 941 mazdoor for polishing 942 bar bender skilled 943 bhisti ( mixing / curing ) semi skilled 944 mukadam semi skilled 945 tar handler semi skilled 946 helper un skilled 947 tree cutter semi skilled 948 navaghani 949 mazdoor unskilled heavy male 950 mazdoor unskilled heavy female 951 below boy 952 fitter with tools i class skilled 953 fitter with tools ii class skilled 954 gun man for guniting 955 laboratory assistant 956 labour for tile turning 957 excavator unskilled heavy 958 breaker semi skilled 959 hole driller semi skilled 960 chiseler semi skilled 961 foreman skilled 962 bandhani semi skilled 963 emgraver for lettering skilled 964 frabi weld drilling 965 khalashi / diers 966 jack hammer operator 967 electrician 968 welder skilled 969 labour for traffic regulation 970 watchman 971 compressor operator / driver 972 supervisor / mate 973 blacksmith ( 1st class ) welder / plumber / electrician. 974 blaster ( stone cutter ) 975 mali 976 mazdoor / dresser ( semi skilled ) 977 mazdoor / dresser sinker b116 skilled 978 medical officer 979 operator ( grouting ) 980 para medical personnel 981 mazdoor unskilled female ( light ) 982 painting lettering number 983 junior engineer 984 surveyor 985 autocad operator 986 attendent 987 computer typist 988 tracer 989 total station operator 990 senior engineer 991 assistant 992 operator / fitter 993 mazdoor unskilled light male 994 computer operator 995 survey helper 996 technician 997 skilled assistants on the site 998 supervisor 999 valuation expert 1000 office support staff 1001 co ordinator 1002 senior surveyor 1003 revenue expert 1004 welder...

Due Date : October 26, 2023

Tender Value : ₹ Ref. Documents

View Tender
46
Rural Development Department - Maharashtra

40315311 providing supplying and erecting various different material and machinery and labour services for crematorium development at grampanchayat gorhekh haweli ( ji va yo jansuvidha vishesh snudan ) 2 40 / 60 mm metal 3 53grade cement 4 20mm metal 5 crush sand 6 mrum 7 pcc m 10 8 concrete m 20 9 bricks ( red ) 10 aac block 600x200x100 mm 11 jointing mortar 12 fly ash bricks 13 water proof compound i.s 14 tar felt b.h.i.s.i.3mm thick 15 acrylic polymer modified waterproofing powder 16 acrylic polymer modified liquid 17 rough shahabad 50 to 60mm thick 18 tandoor polished 25mm thick ( machine cut ) 19 tandoor polished 25mm thick ( hand cut ) 20 tandoor polished for steps25mm thisk 21 tmt fe 500 22 oil enamel paint / flat / glossy paint ( ready mix ) ( with i.s.i. mark ) 23 synthetic paint ( ready mix ) 24 catonic emulsion paint 25 white oil paint 100ml pack tin 26 neel 27 oil bound distemper 28 red powder / geru 29 saras 30 scrapping sand paper size ( 30 * 20cm ) 31 dry distemper 32 bricks 33 steel patra 34 steel 35 aluminium alloy plate 2mm thick 36 aluminium sheeting fixed with encapsuled lens type reflective sheeting including 2% towards lettering , cost of angle iron, cost of drilling holes , nuts, bolts etc. and signs as applicable. 37 tower bolt aluminium 10mm dia.length 250mm 38 tower bolt aluminium 10mm dia.length 200mm 39 aluminium stay 25cm 40 aluminium stay 30cm 41 aluminium section 42 aluminium sheet 24 b.w.g 43 alluminium section with powder coating 44 aluminium strips 50 mm x 3 mm 45 inforamation board 46 tanker for water 47 jcb 48 crane 49 road roller 50 concrete mixer 51 breaker 52 dumper 53 tractor 54 tractor breaker 55 labour services skilled labour 56 labour services unskilled labour 57 black smith with tools ii class 58 stone cutter with tools semi skilled 59 mason i class skilled 60 mason ii class skilled 61 carpenter i class skilled 62 carpenter ii class skilled 63 plumber with tools skilled 64 glazier with tools skilled 65 tin smith with tools semi skilled 66 painter i class skilled 67 painter ii class skilled 68 head fitter with tools skilled 69 mechanic 70 lorry driver / mixer operator 71 welder / driller skilled 72 polishman semi skilled 73 assistant plumber skilled 74 maistry skilled / supervisor / mate 75 vibrator operator skilled 76 skilled labour 77 boreman skilled 78 asphalt sprayer skilled 79 minor or blaster semi skilled 80 quarry man semi skilled 81 painter / white washer semi skilled 82 labour for excavation in hard rock ( un blast ) 83 tile turner semi skilled 84 mazdoor for polishing 85 bar bender skilled 86 bhisti ( mixing / curing ) semi skilled 87 mukadam semi skilled 88 tar handler semi skilled 89 helper un skilled 90 tree cutter semi skilled 91 navaghani 92 mazdoor unskilled heavy male 93 mazdoor unskilled heavy female 94 below boy 95 fitter with tools i class skilled 96 fitter with tools ii class skilled 97 gun man for guniting 98 laboratory assistant 99 labour for tile turning 100 excavator unskilled heavy 101 breaker semi skilled 102 hole driller semi skilled 103 chiseler semi skilled 104 foreman skilled 105 bandhani semi skilled 106 emgraver for lettering skilled 107 frabi weld drilling 108 khalashi / diers 109 jack hammer operator 110 electrician 111 welder skilled 112 labour for traffic regulation 113 watchman 114 compressor operator / driver 115 supervisor / mate 116 blacksmith ( 1st class ) welder / plumber / electrician. 117 blaster ( stone cutter ) 118 mali 119 mazdoor / dresser ( semi skilled ) 120 mazdoor / dresser sinker b116 skilled 121 medical officer 122 operator ( grouting ) 123 para medical personnel 124 mazdoor unskilled female ( light ) 125 painting lettering number 126 junior engineer 127 surveyor 128 autocad operator 129 attendent 130 computer typist 131 tracer 132 total station operator 133 senior engineer 134 assistant 135 operator / fitter 136 mazdoor unskilled light male 137 computer operator 138 survey helper 139 technician 140 skilled assistants on the site 141 supervisor 142 valuation expert 143 office support staff 144 co ordinator 145 senior surveyor 146 revenue expert 147 welder...

Due Date : October 26, 2023

Tender Value : ₹ 9.99 Lakhs

View Tender
47
Shankar Ramchandra Auctioneers Private Limted - Maharashtra

40294321 auction sale of following materials 1 al alloy waste (dross) a4 & a5 30 mt 60 mt 9 9 1 as per requirement rs. 75,000/ 2 aluminum alloy waste oily chip a4 0.300 mt 0.600 mt 9 9 1 rs. 10,000/ 3 alu. buffing dust waste a2 1 mt 2 mt 9 9 1 rs. 10,000/ 4 iron steel waste (rotor waste) a2 & a5 7 mt 14 mt 9 9 1 rs. 25,000/ 5 m s scrap mix all plant 15 mt 30 mt 9 9 1 rs. 60,000/ 6 galvanized punching waste a2 22 mt 44 mt 9 9 1 rs. 50,000/ 7 iron steel waste (turn chips) all plant 15 mt 30 mt 9 9 1 rs. 50,000/ 8 iron steel waste tube end cuts a2 1 mt 2 mt 9 9 1 rs. 10,000/ 9 zn alloy waste (ash powder) [only for mpcb & cpcb licence & hazardous transport licence only] a1 7 mt 14 mt 9 9 1 rs. 50,000/ 10 al. extrusion waste (dust) a1 1 mt 2 mt 9 9 1 rs. 10,000/ 11 al alloy waste chips a2,a4 & a5 15 mt 30 mt 9 9 1 rs. 75,000/ 12 al alloy waste – chips with iron [iron 25% to 30 %] a2 & a5 7 mt 14 mt 9 9 1 rs. 25,000/ 17 al alloy waste (dross) [only for mpcb & cpcb licence & hazardous transport licence only] a2 20 mt 40 mt 9 9 1 rs. 50,000/ 19 aluminium bronz fine dross [only for mpcb & cpcb licence & hazardous transport licence only] a1 6 mt 12 mt 9 9 1 rs. 25,000/ 20 alu. buffing dust waste a5 3 mt 6 mt 9 9 1 rs. 25,000/ 27 brass wire scrap...

Due Date : October 26, 2023

Tender Value : ₹ Ref. Documents

View Tender
48
Maharashtra State Road Transport Corporation - Maharashtra

40285985 scrap material scrap of old unserviceable ber empty engine oil barrels of 205 /210 ltrs. capacity, of a grade as it is,scrap of old unserviceable ber empty grease barrels of 182 kgs/ capacity with or without lid. as it is,scrap of old unserviceable ber empty paints, thinner drums of 20 ltrs capacity of m.s as it is,old unserviceable rubber dust of tyres as it is (located at trp gokul shirgaon),old unserviceable rubber cutting of tyres as it is (located 2 places at trp gokul shirgaon),scrap of old unserviceable card board of packing materials of auto and trp section as it is ( (located at trp gokul shirgaon),scrap of old u/s cut pieces of rexinefoam,fancyridder pcs. of foam quire,small plywood pcs.etc. without aluminium as it is.if any alum. or other material found will be removed at the time of delivery(detailed mentioned as per uploaded pdf catalogue),scrap of old unserviceable passenger seats foam with or without aluminium sheet and rexine and m.s. frame and fiber as it is.,scrap of old unserviceable ber empty p. v. c. barrels of 205/210 ltrs capacity. as it is,scrap of old u/s ber misc. rubber items such as bulb,horn,rubber hose,rubber pieces broken fiber bonnets, radiator reservetankplastic etc.as it is (m.s. at the time of scrap delivery will be removed)(detailed mentioned as per uploaded pdf catalogue),ferrous scrap of old unserviceable ber fly wheel rings, m.s./ c.i. as it is,ferrous scrap of old unserviceable ber fly wheel with rings, m.s./ c.i. as it is,ferrous scrap of old unserviceable ber rear axle shafts as it is,ferrous scrap of old unserviceable ber crown wheel assembly m.s. as it is,ferrous scrap of old unserviceable ber bearing assorted size m.s. as it is,ferrous scrap of old unserviceable ber gear box casing. (hundi) c.i. assorted size as it is,ferrous scrap of old unserviceable ber bell housings tc/tcic of c.i. as it is,non ferrous scrap of old unserviceable ber radiator assy of alluminium with or without bracket as it is,non ferrous scrap of old unserviceable ber inter cooler assorted as it is tc/tcic,non ferrous scrap of old unserviceable ber radiator reserve tank m.s. as it is,scrap of non ferrous old unserviceable ber scrap of radiator assy. of copper and aluminium with or without bracket and with or without brass reserve tank as it is,ferrous scrap of old unserviceable ber clutch plates (tata/leyland) with or without hub assorted size (m. s.) as it is.,ferrous scrap of old unserviceable ber pressure plates assly (top and bottom) of c.i. as it is.,ferrous scrap of old unserviceable ber pressure plates top (tawa) of c.i. as it is.,ferrous scrap of old unserviceable ber pressure plates (cover) of c.i./m.s. as it is.,ferrous scrap of old unserviceable ber diesel tanks in assorted size as it is.,ferrous scrap of old unserviceable ber propeller shaft with or without yoke, brackets etc m.s. assorted size as it is,ferrous/non ferrous scrap of old unserviceable ber starter armature with or without commutators of brass as it is.,ferrous scrap of old unserviceable ber brake shoe with linning of m.s. as it is.,ferrous scrap of old unserviceable ber steering box (qty.25 nos.), / hub (qty.8 nos.) / steering box bracket (qty.9 nos.)m.s./c.i. as it is,ferrous scrap of old unserviceable differential (rear) housing m.s. / c.i. as it is (without crown pinion),scrap of old unserviceable ber full circle curing bags of rubber , as it is (located at the tyre retreading plant, gokul shirgaon, kolhapur.),scrap of old unserviceable ber rubber envelopes,900x20 as it is(located at the tyre retreading plant, gokul shirgaon, kolhapur.),non ferrous scrap of old u/s ber brass bush with brass and other material and bearing as it is,non ferrous scrap of old u/s ber brass bushing, brass cutting, brass dust synchromising ring as it is,scrap of old u/s ber auto/gen. electric material consisting of auto bulb,ele.wires,cables, armiture without wire and spares wiper armiture spares, main switch pannel board, gear etc as it is.(detailed mentioned as per uploaded pdf catalogue),ferrous scrap of old unserviceable ber fire extinguishers assorted size (2 kg, 4 kg, 9 ltr, 10 kg) m.s. as it is.,ferrous scrap of old unserviceable ber mechanic tools such as box spanner, ring spanners, wheel nut spanner, tommy bar as it is,ferrous/ non ferrous scrap of old unserviceable ber all type of engine oil filters, diesel filters, air filters, air dryer filters, assorted size as it is.,ferrous/ non ferrous scrap of old unserviceable ber all type of copper wire, strips,coil etc, assorted size as it is. (pcb licence required),ferrous scrap of old u/s ber iron dust / turning waste as it is,ferrous scrap of old u/s ber allu. wire nails (approx 2 barrel) as it is,ferrous scrap of old unserviceable ber rear brake chamber assorted size as it is.,ferrous/non ferrousw scrap of old unserviceable ber shock absorber. assorted size as it is,ferrous scrap of old unserviceable ber clutch facing pad assorted size as it is,ferrous/non ferrous scrap of old unserviceable ber ven pump t.c.i.c. m.s. assorted size as it is,ferrous/non ferrous scrap of old unserviceable ber stator assorted size as it is,scrap of old u/s ber solonoid switch as it is,ferrous/non ferrous scrap of old unserviceable ber d.d. unit assorted size as it is,scrap of old empty b.v.c drums of m.s. (a grade) as it is (located at trp gokul shirgaon, kolhapur),scrap of old empty b.v.c drums of m.s. (b grade) as it is (located at trp gokul shirgaon, kolhapur),scrap of old polythene plastic perforated polly, consisting polythene bags etc. as it is. (located at trp gokul shirgaon, kolhapur),scrap of old plastic ticket roll pungli (approx 17 barrels) as it is.,ferrous scrap of old unserviceable ber wiper motor m.s./ c.i. as it is,ferrous scrap of old u/s ber m.s. consisting of bus body material such as m.s angles, flat pieces of wire mesh broken seat frames, pipes, panels,m.s window frames luggage carriers, etc.as it is (detailed mentioned as per uploaded pdf catalogue),non ferrous scrap of old u/s ber allu. sheets/angles, allu. extruded sections etc. as it is,ferrous scrap of old u/s ber m.s. steel spring leaves assorted sizes as it is,ferrous scrap of misc. auto old ber spares such as shackle pins,kingpins,studs,water pump and spares, all type of bracket anchor plats,front brake chamber,power steering pipes etc.as it is, (ms/ci)(detailed mentioned as per uploaded pdf catalogue),ferrous scrap of old unserviceable ber special auto spares such as gears in various sizes gear parts, gear shaft ,gear wheels, crown penion wheel, crown penion, gear box main shaft of g.b. 60 and g.b.40, g.b.75 lay shaft etc. as it is (m.s./ c.i.),ferrous /non ferrous scrap of old u/s ber aluminum alloys auto consisting of fuel/oil filters, bodies, pistons, a.c. pistons, timing cover case, compressor heads, seal covers plates, tappet covers, and other alloy auto parts etc. as it is.,ferrous scrap of old unserviceable ber brake drums frt/rr assorted size c.i. as it is,ferrous scrap of old u/s ber malleable auto items consisting of hangers,shackles,brackets, tops flanges water pump bodies bench vice, dumper pulley and other c.i. items etc. of ms/ci as it is(detailed mentioned as per uploaded pdf catalogue),non ferrous scrap of old u/s ber lead acid batteries 12 v x 150 ah as it is (pcb licence required),non ferrous scrap of old u/s ber lead acid batteries 12 v x 180 ah as it is (pcb licence required),scrap of burnt engine oil with barrel 210 ltr capacity ( water removal allowed.) as it is (pcb licence required),scrap of old sludge or grease or water (with or without full capacity) barrel as it is (pcb license required) (appr.37 barrels),scrap of old unserviceable ber nylon tyres of size 900 x 20, as it is (located at the tyre retreading plant, gokul shirgaon, kolhapur.),scrap of old unserviceable ber nylon tyres of size 900 x 20, as it is (located at the tyre retreading plant, gokul shirgaon, kolhapur.),scrap of old unserviceable ber nylon tyres of size 900 x 20, as it is (located at the tyre retreading plant, gokul shirgaon, kolhapur.),scrap of old unserviceable ber nylon tyres of size 900 x 20, as it is (located at the tyre retreading plant, gokul shirgaon, kolhapur.),scrap of old unserviceable ber nylon tyres of size 900 x 20, as it is (located at the tyre retreading plant, gokul shirgaon, kolhapur.),scrap of old unserviceable ber radial tyre of size 900 x 20, as at is(located at the tyre retarding plant, gokul shirgaon, kolhapur.),scrap of old unserviceable ber radial tyre of size 900 x 20, as at is(located at the tyre retarding plant, gokul shirgaon, kolhapur.),scrap of old unserviceable ber radial tyre of size 900 x 20, as at is(located at the tyre retarding plant, gokul shirgaon, kolhapur.),scrap of old unserviceable ber radial tyre of size 900 x 20, as at is(located at the tyre retarding plant, gokul shirgaon, kolhapur.),scrap of old unserviceable ber radial tyre of size 900 x 20, as at is(located at the tyre retarding plant, gokul shirgaon, kolhapur.),scrap of old unserviceable ber radial tyre of size 900 x 20, as at is(located at the tyre retarding plant, gokul shirgaon, kolhapur.),scrap of old unserviceable ber radial tyre of size 900 x 20, as at is(located at the tyre retarding plant, gokul shirgaon, kolhapur.),scrap of old unserviceable ber radial tyre of size 900 x 20, as at is(located at the tyre retarding plant, gokul shirgaon, kolhapur.),scrap of old unserviceable ber radial tyre of size 900 x 20, as at is(located at the tyre retarding plant, gokul shirgaon, kolhapur.),scrap of old unserviceable ber radial tyre of size 900 x 20, as at is(located at the tyre retarding plant, gokul shirgaon, kolhapur.),scrap of old unserviceable ber radial tyre of size 900 x 20, as at is(located at the tyre retarding plant, gokul shirgaon, kolhapur.),scrap of old unserviceable ber radial tyre of size 900 x 20, as at is(located at the tyre retarding plant, gokul shirgaon, kolhapur.),scrap of old unserviceable ber radial tyre of size 900 x 20, as at is(located at the tyre retarding plant, gokul shirgaon, kolhapur.),scrap of old unserviceable ber tubeless tyres size 295/80r, 22.5 x 16 pr as it is (located at the trp, gokul shirgaon, kolhapur.),scrap of old unserviceable ber various types of odd size of tyres as it is (located at the trp, gokul shirgaon, kolhapur.),scrap of old unserviceable ber radial tyres size 1000x20 as it is (located at the trp, gokul shirgaon, kolhapur.),scrap of old unserviceable ber radial tyres size 1000x20 as it is (located at the trp, gokul shirgaon, kolhapur.),scrap of old unserviceable ber radial tyres size 1000x20 as it is (located at the trp, gokul shirgaon, kolhapur.),scrap of old unserviceable ber nylon tyres size 1000x20 as it is (located at the trp, gokul shirgaon, kolhapur.),scrap of old unserviceable ber rubber tubes with / without valves, as it is. size 900 x 20 / 10.00x20,scrap of old unserviceable ber rubber flaps,pieces of tubes,torn tube and miscellaneous rubber etc.as it is,ferrous non ferrous scrap of old u/s ber only bus body in cannibalised condition/skeleton allu. m.s. without chassis and with / without seats as it is ( bus body located at kagal depot )...

Due Date : November 04, 2023

Tender Value : ₹ Ref. Documents

View Tender
49
Department of Defence Production - Maharashtra

40284310 bids are invited for aluminium alloy sheet plate flat 2 155 o60632105118450017 , o60632105118450017a , o60632105118450017b , o60632105118450018 , o60633104119113499 , o60633104119119113 , o60633104119119125 , o64018123172528360 , o68318101012211524 , o68318101012211748 , o68318101012211924 , o68318101012212121 , o68318101012212124 , o68318101012212125 , o68318101012212129 , o68318101012212130 , o68318101012212132 , o68318101012212136 , o68318101012212137 , o68318101012212139 , o68318101012212141 , o68318101012212142 , o68318101012212150 , o68318101012212179 , o68318101012212279 , o68318101012212324 , o68318101012212332 , o68318101012212339 , o68318101012212346 , o68318101012212565 , o68318101012212750 , o68318101012212844 , o68318101012212845 , o68318101012212926 , o68318101012212932 , o68318101012212944 , o68318101012212945 , o68318101012212946 , o68318101012212964 , o68318101012213145 , o68318101012213184 , o68318101012213221 , o68318101012213964 , o68318101012213994 , o68318101012217148 , o68318101012217324 , o68318101012217327 , o68318101012219121 , o68318101012219124 , o68318101012219132 , o68318101012219143 , o68318101012219155 , o68318101012219221 , o68318101012219228 , o68318101012219332 , o68318101012220129 , o68318101012221989 , o68318101012222564 , o68318101012223946 , o68318101012225604 , o68318101012225704 , o68318101012225904 , o68318101012225994 , o68318101012228704 , o68318101012229129 , o68318101012231084 , o68318101012242127 , o68318101012292292 , 1 155o68318101012242127 , o68318101012292292 , o68318101018411744 , o68318101018411753 , o68318101018411773 , o68318101018411774 , o68318101018411779 , o68318101018411791 , o68318101018411908 , o68318101018411933 , o68318101018411949 , o68318101018411983 , o68318101018411996 , o68318101018412078 , o68318101018412109 , o68318101018412389 , o68318101018412436 , o68318101018412514 , o68318101018412541 , o68318101018412709 , o68318101018412728 , o68318101018412894 , o68318101018412941 , o68318101018412983 , o...

Due Date : December 09, 2023

Tender Value : ₹ Ref. Documents

View Tender