40689078 bids are invited for relaying of basketball court civil work , polypropylene modular tiles , load bearing capacity 150 psi above , portable back stop unit incl fiber glass bd , ms steel bench with powder cated total quantity : 32506...
40578809 proposed non ssr items for palghar district sports complex project at dist palghar , item , providing and laying cast in situ / ready mix cement concrete m 40 post tensioning in pt slabs & pt beams for the loading as mentioned in relevant drawing as per the technical specifications including decoiling the strands, cutting to the required lenghts, supplying & laying of ht strands ( tata make ) , sheating ( gi ducts ) , jointing with couplers & inserting the strands, profiling, fixing live end anchorages including the supply of stressing anchorages, grout vents, making dead end anchorages including flowering the strands, fixing tendon support bars, supervising the fixing of anti bursting reinforcement, stressing the cable end trimming, grouting the cables with cement slurry mixed with approved admixtures with required tools , plants, machineries & consumables etc. including demarcationon soffit of the slab with 100 wide red paint indicating cable profiles, including obtaing approval from client / consultant for the work doneof trap / granite / quartzite / gneiss metal for r.c.c. slabs and landingsas per detailed designs and drawings includingcentering , formwork, cover blocks, laying / pumping, compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, ( excluding reinforcement and structural steel ) with fully automatic micro processor based plc with scada enabled reversible drum type mixer / concrete batch mixplant ( pan mixer ) etc. complete, with fine aggregate ( crushed sand v.s.i. grade ) . including , providing, supplying & fixing on site glass fibre reinforced polymer ( gfrp ) rebars in lieu of tmt 500 of various specified diameters and of approved make conforming to irc:137:2022 as per detailed designs, drawings & schedules and mounted on plastic clips / knotting wire including all material, labour, necessary tools & plants, transportation, stocking / stacking, all leads & lifts, taxes except gst, loading & unloading, cleaning, etc. complete ( item to be used only in concrete roads, storm water drains, gutters, in buildings for plinth level pcc with nominal reinforcement only ) 4mm , 6mm , 7mm , 8mm , 10mm , 12mm , 14mm , 16mm , 18mm , 20mm , 22mm , 25mm , 32mm , providing & fixing door frame made out of 12mm & 18mm bwp with approved mica laminates etc.complete item , providing and laying in trenches 65 mm dai. upvc pipe including necessary excavation, fittings. refilling trenches etc. complete. including removing existing pipe line if necessary and conveying and stacking the same complete. , providing and laying in trenches 80 mm dai. upvc pipe including necessary excavation, fittings. refilling trenches etc. complete. including removing existing pipe line if necessary and conveying and stacking the same complete. , providing and laying in trenches 100 mm dai. upvc pipe including necessary excavation, fittings. refilling trenches etc. complete. including removing existing pipe line if necessary and conveying and stacking the same complete. , providing and laying in trenches 150 mm dai. upvc pipe including necessary excavation, fittings. refilling trenches etc. complete. including removing existing pipe line if necessary and conveying and stacking the same complete. , nssr item for plumbing foot ball ground 1.22 providing and laying in trenches 100 mm width power drain belt including necessary excavation, fiittings. the same complete. , providing and laying in trenches 80mm perforated corrougated pipe with geo fabric including necessary excavation, fiittings the same complete. , nssr item for plumbing boi disetor phyatoride system planed bed unit: the planed bed works on the principle of sequential aerobic and anoxic treatment. this unit uses novel filling media. the planed bed is sown with semi aquatic, aquatic, ornamental, flowering species of plant, where the wastewater flows in a sinusoidal manner to achieve the better efficiency of treatment. this unique baffle and wall arrangement increases the contact time with the microbes and the plant roots and provides alternate aerobic and anoxic phases in the same reactor leading to sbr, mbbr type operations. in this unit the bed is filled with different size filling media and wetland plants such as colocasiaesculenta, canna indica, yperusalternifolius, etc. 13 kld commercial complex , 25kld admin building , 90kld spectactor 01 , 90kld spectactor 02 , nssr item for irrigation p / f 16mm main lateral 4 lph as drip line with dripper as per specificatio icluding excaation, laying & other necessary work complete , providing and fixing adjustable speed of rotating 0 to 65 second. it is gear driven, sloted grease lubricated gear drive poup up height 13 cm area covered 32.5 to 46.3m radius ( st 1600 hs b ) , mp rotator sprinkler: multi stream, multi trajectory rotating stream sprinkler with double popup. in full or part circle model covering 2.5 mtr to 9.4 mtrradius at 2.5 bar pressure with an equivalent full circlethe adjustment ring shall be effective only while the sprinkler is popped up and shall be ineffective while the sprinkler is popped down. the sprinkler shall be fitted with a detachable filter. installed on popup bodies having a 4” popup male threaded stem with ½ fipt threaded adapter. with check valve sprinkler with 10 to 10.6 mtr radius. , 4 pop up plastic rotor : heavy duty commercial grade for parks & garden , 1 female inlet, exposed dia 2, discharge rate 1.59 to 6.4 cumh. radius of coverage 16 to 21 mtrs. recommended pressure 3 kg. / sq.cm to 6.9 kg. / sq.cm., nozzle trajectory 25 deg. small exposed heavy duty rubber cover, four elbow swing joints & check valve. , 2 or 4 inch pop up adjustable rotor plastic : heavy duty commercial grade, 3 / 4 female inlet, discharge rate 0.2 to 3.36 cumh. radius of coverage 8 m to 14.3 mtrs. recommended pressure 2.1 kg. / sq.cm to 4.8 kg. / sq.cm., nozzle trajectory 25 deg. integral rubber cover & with four elbow swing joint & check valve , impact pop up 1 / 2 female inlet, heavy duty plastic adjustable sprinkler 3.2 mm. nozzle & plastic heavy duty housing, operating pressure 2 kgf to 4 kgf. flow= 570 to 810 lph. with 4 elbow swing joint. , sst manifold and isolation valve with flexible stainless inlet hose , providing and erecting disc filter : is 12785 : 30 m3 / hr. flow capacity plastic ribbed body construction manufactured from plastic alloy material withstanding maximum pressure of 10 kg. / cm2. bspt. 2 male threaded standard end connection. to be provided with disc filtration element of 100 micron size , pvc ball valve 50mm: isi marked withstanding at least 10 kg. / cm2 pressure. , air / vacuum release valve 1”: plastic rigid pvc. body continuous acting air release valve during start up& operation of the system. acts as vacuum breaker while drain off. 1” bsp male threded end connection. to be provided with required riser assembly. withstanding maximum line pressure of 10 kg. / cm2. with all fittings , providing erecting 2.5 glycerinefillled pressure gauge etc . , providing erecting 50 mm dia6kg , 6 rigid pvc pipeisi etc. complete. , providing erecting 63 mm x 6.0 kg x 6 mter rigid pvc pipe isietc. complete. , providing erecting drip 63mm pvc ball valve plane type etc. , providing erecting flush valve 2 mm etc. , valve box and accessories : supplying and erection of valve box and there accessories, circular / rectangular model with rugged reinforced plastic constructionand robust top cover with non slippery grips and provisions of snap fit type locking arrangement including all material labour, hydraulic testing and commissioning all complete as per the direction of engineers in charge. a ) 10 round valve box , b ) 6 round valve box , providing and fixing service saddle , swing joint : ½” x 30 cm ( 12” ) standard swing joint, 4 swing elbows , pressure release valve 2.3 kg / cm2 to 8 kg / cm2 , supply & placing of geotextile seperation barrier to cover the entire field including the edges. geo textile barrier 220 225 gsm , garware make or equivalent make nylon mesh [ 50mm x 50mm ] , 2.5mm thick , part b sports related items fixed volleyball post providing and fixing of standard volleyball fixed pole pair regular model with heavy duty ms pipe, height adjustable for juniors, men or women made of 3x4 pipe epoxy painted comprises a special internal ratchet system comprises a special internal ratchet system with garware tournament quality net ...etc comple and as directed by engineer in charge , supply and installation ofhaving thickness of 6mm comprising of 4mm prefabricated sbr mat followed by 2mm pu coatings. seamless, non porous and smooth surface for very good resiliency for comfort, injury prevention, sustainability through high content of recycled and renewable raw materials in combination with lasting performance through very good mechanical strength, wear resistance and easy maintenance, repair & resurface procedures. system consist ofsbr matt being laid using two component pu adhesive followed by sealer to fill in all the pores of sbr mat, 2 coats of pu resin layer followed by top pu coat and game line marking...etc comple and as directed by engineer in charge , wrestling matt supplying & fixing surface that is approved by world taekwondo federation ( wtf ) . material: xpe, leather with pattern technology improvement: low ratio xpe and dedicated leather with pattern, absorbing energy, great performance of buffering, excellent breathability, soft surface; compounded by fire, connected by toothed edge, more stable.etc comple and as directed by engineer in charge ( tile size of 1m x 1m x 50mm, colour options red, blue, yellow, green ) , judo matt supplying & fixing surface that is approved by world taekwondo federation ( wtf ) . material: xpe, leather with pattern technology improvement: low ratio xpe and dedicated leather with pattern compounding to this new model mat. 8m octagonal competition area is blue, safety area is red. absorbing energy, great performance of buffering, excellent breathability, soft surface; compounded by fire, connected by toothed edge, more stable. ( tile size of 1m x 1m x 50mm, colour options red, blue, yellow, green ) , supply and installation of european origin heterogeneous sports vinyl flooring 6.7mm thickness with sheet width not less than 2.0 metre width jointed with seamless thermo welding laid with suitable premium adhesive@ 0.25kg / m2 over suitable subbase, conforming to manufacturers specifications including line marking for the specific sports area ( basketball court, badminton court, tennis court & gymnasium etc., ) with 2c polyurethane / epoxy marker paint of approved quality and as directed by the engineer in charge. the sports flooring shall be ( i ) bacterial resistant, ( ii ) thermo welding of joints of flooring shall be by heat process to make seamless floor finish, ( iii ) the joints in the flooring shall be sealed by using a pvc welding bar of matching colour using hot air gun. the product shall be floor score, fiba, bwf & ihf certified, its bwf certification shall be of grade 1 ( bwf international elite ) . product should have been installed in top institute of india i.e. iit, nit or equivalent. technical standards of product are as per following; surface finish : xpur scuff resistant surface, backing: combined closed cell foam, weight: 3.6 kg / m2 as per en iso 23997 standards, roll size: 2 meter width x 15 meter length ± 1%, product specification should fall under en 14904 ( category p1 ) , impact sound insulation: 22 db as per en iso717 2 standards thermal resistance: 0.07 m2 k / w, reaction to fire: c fls1, formaldehyde emission: no formaldehyde , pentachlorophenol: no pentachlorophenol, friction: 80 110 as per en 13036 4 standards, shock absorption: >25% en 14808 , vertical deformation: 1.08mm en 14809, ball rebound: 97% as per en 12235, specular gloss: < 30 as per en 2813, dimensional stability: ± 0.2% en iso 23999, indentation resistance: <0.5mm en 1516, resistance to rolling load: 1500 n as per en 1569, colour fastness: 6 iso 105 b02, chemical resistance: no change eniso 26987, abrasion resistance: < 250 mg / 1000cycles as per en iso 5470 1 standards and product is solvent and heavy metal free.....etc complete , supply and installation of european origin heterogeneous sports vinyl flooring 6.7mm thickness with sheet width not less than 2.0 metre width jointed with seamless thermo welding laid with suitable premium adhesive@ 0.25kg / m2 over suitable subbase, conforming to manufacturers specifications including line marking for the specific sports area ( basketball court, badminton court, tennis court & gymnasium etc., ) with 2c polyurethane / epoxy marker paint of approved quality and as directed by the engineer in charge. the sports flooring shall be ( i ) bacterial resistant, ( ii ) thermo welding of joints of flooring shall be by heat process to make seamless floor finish, ( iii ) the joints in the flooring shall be sealed by using a pvc welding bar of matching colour using hot air gun. the product shall be floor score, fiba, bwf & ihf certified, its bwf certification shall be of grade 1 ( bwf international elite ) . product should have been installed in top institute of india i.e. iit, nit or equivalent. technical standards of product are as per following; surface finish : xpur scuff resistant surface, backing: combined closed cell foam, weight: 3.6 kg / m2 as per en iso 23997 standards, roll size: 2 meter width x 15 meter length ± 1%, product specification should fall under en 14904 ( category p1 ) , impact sound insulation: 22 db as per en iso717 2 standards thermal resistance: 0.07 m2 k / w, reaction to fire: c fls1, formaldehyde emission: no formaldehyde , pentachlorophenol: no pentachlorophenol, friction: 80 110 as per en 13036 4 standards, shock absorption: >25% en 14808 , vertical deformation: 1.08mm en 14809, ball rebound: 97% as per en 12235, specular gloss: < 30 as per en 2813, dimensional stability: ± 0.2% en iso 23999, indentation resistance: <0.5mm en 1516, resistance to rolling load: 1500 n as per en 1569, colour fastness: 6 iso 105 b02, chemical resistance: no change eniso 26987, abrasion resistance: < 250 mg / 1000cycles as per en iso 5470 1 standards and product is solvent and heavy metal free. , supply and installation of european origin, fiba, bwf & ihf certified, point elastic polyurethane flooring pulastic classic 110 having thickness of 11mm comprising of 9mm prefabricated sbr mat followed by 2mm pu coatings. seamless, non porous and smooth surface for very good resiliency for comfort, injury prevention, sustainability through high content of recycled and renewable raw materials in combination with lasting performance through very good mechanical strength, wear resistance and easy maintenance, repair & resurface procedures. system consist ofsbr matt being laid using two component pu adhesive followed by sealer to fill in all the pores of sbr mat, 2 coats of pu resin layer followed by top pu coat and game line marking. product should meet european standards en 14904 p1 category, shock absorption: 28% as per en 14808, vertical deformation: 1.4mm as per en 14809, friction value according to en 13036 4 should be on or above 107, ball bounce: 98% according to en 12235, gloss: 5% as per en 2813, resistance to rolling load: = 1500 n as per en 1569, resistance to impact: = 800 gr @ 10°c & = 1200 gr @ 23°c as per en 1517, resistance to indentation: 0, 35 mm @ 5 min & 0, 15 mm @ 24 hrs as per en 1516, resistance to wear: < 340 mg as per en iso 5470, flammability: bfl s2 as per en 13501 1, improvement impact sound insulation ( ?lw ) : 21db according to iso 717 2, v.o.c. content – adhesive / resins solvent free, resin composition free of solvents and heavy metals, elongation at break: structure 150 % as per din 53455, tensile strength: structure 8 n / mm² according to din 53455, tear strength: structure 25 n / mm according to din 53515. consumption of materials has be as per standards which is 0.90kg / sqm adhesive for sbr matt, 0.5kg / sqm sealer, 2.8kg / sqm pu wear coating followed by 0.14kgsqm top pu color coat. product should be manufactured under iso 9001 for quality management , iso 14001 for environmental care and iso 26000 for corporate sustainability. , moveable football goal post competition ( professional ) *made with branded high quality ms steelnpipe in 4 dia *junior football goal post *branded epoxy paint *rust & corrosion free *zero vibration *size options: 24x8 with 1.5 back support. *the poles comprise wheels which make it easy to move , providing and laying geotextiles sheet permeable nonwoven 250 gsm four metre roll width & 100 metre length. , providing and laying iaaf approved synthetic athletics track ( maroon colour ) full pur system minimum 15mm thick iaaf certified system including line marking and attaining class i certificatin from world athletic federation.the world athletic federation certificate must mention the thickness of the product which should be minimum 15mm as per the certificate, the product must be free of volatile organic compound ( report should be attached with the specs ) .full pur system duly world athletic federation certified, spread with sbr ( recycled rubber ) in first 2 layers and coloured epdm granules in final layer must be water impermiable layer consist of bound sub base ( closed asphalt ) , for rubber granules 1 4 mm fixed with a cast coating 5 mm per layer & structured cast coating 3 5 mm spread with epdm 1 4 mm.system should fullfill the following properties water impermiable, porefilled, self leveling, jointless, granulated surface for anti slip properties can handle constant stresses by spikes, dynamic elasticity, excellent appearance & colours, including markings on the surface all complete as per requirements / specifications laid down by world athletic federation & class 1 certification as per iaaf. ( i ) normal stress areas with a minimum thickness of 15 mm of finished tracksurface. , ( ii ) high stress areas with a minimum thickness of 20 mm of finished tracksurface. , ( iii ) high stress areas with a minimum thickness of 25 mm of finished track surface , discus throwing circle aluminium ( aluminium discus circle made of heavy duty aluminium. this can be folded in 2 parts for easy transportation. iaaf certified ) , discus throwing cage ( pole vault inlay & cover ( made of heavy duty 92 mm square steel tube, hot galvanized for long life. poles can be detached from centre for easy transportation and hinged for easy lifting during installation. all poles are bound together with the help of tie bars for sturdiness of the cage. machine knitted 5 mm thick net with square mesh of size 40 mm. net is uv stabilized for long life. steel tube is used on the top of the net to avoid sagging.cage with netting, iaaf certified ) , hammer throwing circle aluminium ( made of thick aluminium alloy in angle type construction. constructed in two halves. best quality nickel plated hardware used for assembling the unit. easy to assemble and can be folded very easily for convenient transportation & storage.iaaf certified ) , discus and hammer throwing cage ( made of heavy duty 100 mm square steel tube, hot galvanized for long life. poles can be detached from centre for easy transportation and hinged for easy lifting during installation. easy to bind the poles together with the help of tie bars for sturdiness of the cage. gates are attached to the poles using four hinges and both gates include wheels for easy movement. net is5 mm thick ( machine knitted ) with 40 mmsquare mesh. net is uv stabilized for long life. steel tube is used on the top of the net to avoid sagging. iaaf certified cage with netting ) , shot put throwing circle aluminium ( made of thick aluminium alloy in angle type construction. constructed in two halves. best quality nickel plated hardware used for assembling the unit. easy to assemble and can be folded very easily for convenient transportation & storage.iaaf certified ) , take off board system ( latest design take off board system, made of solid wood. welded aluminium tray protects take off area and facilitates easy replacements of take off board and plasticine board. comes with heavy construction aluminium blanking lid for durability.iaaf certified ) , triple jump take off board system ( stop board made of fibre designed for depressed pad.iaaf certified ) , fibre stop board competition ( stop board made of fibre designed for depressed pad.iaaf certified ) , water barriers ( heavy duty foldable beam made square pipe inside & covered with thick water proof solid plywood. base legs & base made of steel square pipe with spring loaded snap lock system for easy adjustment of three different required heights. 762m.m. , 838m.m. , 914 m.m. legs are fitted into sockets grouted in to the ground. painted with premium quality poly urethane paint for longer life & durability. easy to install & foldable to transport.iaaf certified ) , pole vault box competition ( welded stainless steel construction. comes with blanking board made of aluminium. sockets at bottom for drainage of water.iaaf certified ) , track kerbing ( heavy gauge aluminium features a box profile top. held in place by 10 mm tall ribbed feet. raised 10 mm off the track surface for rapid drainage. each section of kerbing is milled to allow easy drop in or removal of corresponding sections. available in raw or anodized finish. iaaf certified ) , construction of various play courts ( i, e, volley ball, kho kho, kabbadi, etc ) as per detailed drawing and direction of engineer in charge consisiting of various layers i.e. 150mm thick compacted rubble soling, 50mm thick hard murum layer, 100mm thk 1 layer of brick on edge including filling gaps in sinders of brick bats, 30mm thk , loose 20mm thk compacted mother soil ( including 30% black soil, 40% sand, 30% garden soil, including screening in 6mm jali & laying in layer by layer with rolling by light roller ) including compacting and curing and even and well levelled surface to be given with wet lime marking and all other relevant details as per above said norms etc. complete. , construction of sand filling in jumping pits, including cost and conveyance of all materials and labour charges to the site to fill the sand in pits and complete finished item as per drawing and as directed by engineer incharge. , construction of steeplecase pit insided portion as per iaaf drawingand as directed by engineer in charge , supplying & laying of artificial turf for football: proviiding, supplying & installing on site extreme wear resistant football turf with expected life of 10 12 years. product should pass 60, 000 cycles of lisport xl test ( highest for any sports turf in india currently ) of hero make or equivalent. berlin hero 18, 000 dtex, pile height 50mm, 18, 000 dtex, double pp + pu backing + mesh, 14 / 10cm stitches, density 8820, roll size 4m x 30m or as specified, diamond shape grass. fifa licensee supplier product. roll size 4m x 30m or as specified, warrantee upto 8 years, product passes 60, 000 cycles in lisport xl test....
40535155 bids are invited for custom bid for services procurement and installation of basketball court with pp tiles at nbcd school total quantity :...
40377746 bids are invited for construction of basketball court with synthetic surface total quantity : 1...
40254066 bids are invited for polypropylene interlocking pp tiles for basketball court (q3) total quantity : 1...
40231449 proposed non ssr items for palghar district sports complex project at dist palghar , providing and laying cast in situ / ready mix cement concrete m 40 post tensioning in pt slabs & pt beams for the loading as mentioned in relevant drawing as per the technical specifications including decoiling the strands, cutting to the required lenghts, supplying & laying of ht strands ( tata make ) , sheating ( gi ducts ) , jointing with couplers & inserting the strands, profiling, fixing live end anchorages including the supply of stressing anchorages, grout vents, making dead end anchorages including flowering the strands, fixing tendon support bars, supervising the fixing of anti bursting reinforcement, stressing the cable end trimming, grouting the cables with cement slurry mixed with approved admixtures with required tools , plants, machineries & consumables etc. including demarcationon soffit of the slab with 100 wide red paint indicating cable profiles, including obtaing approval from client / consultant for the work doneof trap / granite / quartzite / gneiss metal for r.c.c. slabs and landingsas per detailed designs and drawings includingcentering , formwork, cover blocks, laying / pumping, compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, ( excluding reinforcement and structural steel ) with fully automatic micro processor based plc with scada enabled reversible drum type mixer / concrete batch mixplant ( pan mixer ) etc. complete, with fine aggregate ( crushed sand v.s.i. grade ) . including , providing, supplying & fixing on site glass fibre reinforced polymer ( gfrp ) rebars in lieu of tmt 500 of various specified diameters and of approved make conforming to irc:137:2022 as per detailed designs, drawings & schedules and mounted on plastic clips / knotting wire including all material, labour, necessary tools & plants, transportation, stocking / stacking, all leads & lifts, taxes except gst, loading & unloading, cleaning, etc. complete ( item to be used only in concrete roads, storm water drains, gutters, in buildings for plinth level pcc with nominal reinforcement only ) , 4 mm , 6mm , 7mm , 8mm , 10mm , 12mm , 14mm , 16mm , 18mm , 20mm , 22mm , 25mm , 32mm , providing & fixing door frame made out of 12mm & 18mm bwp with approved mica laminates etc.complete item , providing and laying in trenches 65 mm dai. upvc pipe including necessary excavation, fittings. refilling trenches etc. complete. including removing existing pipe line if necessary and conveying and stacking the same complete. , providing and laying in trenches 80 mm dai. upvc pipe including necessary excavation, fittings. refilling trenches etc. complete. including removing existing pipe line if necessary and conveying and stacking the same complete. , providing and laying in trenches 100 mm dai. upvc pipe including necessary excavation, fittings. refilling trenches etc. complete. including removing existing pipe line if necessary and conveying and stacking the same complete. , providing and laying in trenches 150 mm dai. upvc pipe including necessary excavation, fittings. refilling trenches etc. complete. including removing existing pipe line if necessary and conveying and stacking the same complete. , providing and laying in trenches 100 mm width power drain belt including necessary excavation, fiittings. the same complete. , providing and laying in trenches 80mm perforated corrougated pipe with geo fabric including necessary excavation, fiittings the same complete. , planed bed unit: the planed bed works on the principle of sequential aerobic and anoxic treatment. this unit uses novel filling media. the planed bed is sown with semi aquatic, aquatic, ornamental, flowering species of plant, where the wastewater flows in a sinusoidal manner to achieve the better efficiency of treatment. this unique baffle and wall arrangement increases the contact time with the microbes and the plant roots and provides alternate aerobic and anoxic phases in the same reactor leading to sbr, mbbr type operations. in this unit the bed is filled with different size filling media and wetland plants such as colocasiaesculenta, canna indica, yperusalternifolius, etc. , 13 kld commercial complex , 25kld admin building , 90kld spectactor 01 , 90kld spectactor 02 , p / f 16mm main lateral 4 lph as drip line with dripper as per specificatio icluding excaation, laying & other necessary work complete , providing and fixing adjustable speed of rotating 0 to 65 second. it is gear driven, sloted grease lubricated gear drive poup up height 13 cm area covered 32.5 to 46.3m radius ( st 1600 hs b ) , mp rotator sprinkler: multi stream, multi trajectory rotating stream sprinkler with double popup. in full or part circle model covering 2.5 mtr to 9.4 mtrradius at 2.5 bar pressure with an equivalent full circlethe adjustment ring shall be effective only while the sprinkler is popped up and shall be ineffective while the sprinkler is popped down. the sprinkler shall be fitted with a detachable filter. installed on popup bodies having a 4” popup male threaded stem with ½ fipt threaded adapter. with check valve sprinkler with 10 to 10.6 mtr radius. , 4 pop up plastic rotor : heavy duty commercial grade for parks & garden , 1 female inlet, exposed dia 2, discharge rate 1.59 to 6.4 cumh. radius of coverage 16 to 21 mtrs. recommended pressure 3 kg. / sq.cm to 6.9 kg. / sq.cm., nozzle trajectory 25 deg. small exposed heavy duty rubber cover, four elbow swing joints & check valve. , 2 or 4 inch pop up adjustable rotor plastic : heavy duty commercial grade, 3 / 4 female inlet, discharge rate 0.2 to 3.36 cumh. radius of coverage 8 m to 14.3 mtrs. recommended pressure 2.1 kg. / sq.cm to 4.8 kg. / sq.cm., nozzle trajectory 25 deg. integral rubber cover & with four elbow swing joint & check valve , impact pop up 1 / 2 female inlet, heavy duty plastic adjustable sprinkler 3.2 mm. nozzle & plastic heavy duty housing, operating pressure 2 kgf to 4 kgf. flow= 570 to 810 lph. with 4 elbow swing joint. , sst manifold and isolation valve with flexible stainless inlet hose , providing and erecting disc filter : is 12785 : 30 m3 / hr. flow capacity plastic ribbed body construction manufactured from plastic alloy material withstanding maximum pressure of 10 kg. / cm2. bspt. 2 male threaded standard end connection. to be provided with disc filtration element of 100 micron size , pvc ball valve 50mm: isi marked withstanding at least 10 kg. / cm2 pressure. , air / vacuum release valve 1”: plastic rigid pvc. body continuous acting air release valve during start up& operation of the system. acts as vacuum breaker while drain off. 1” bsp male threded end connection. to be provided with required riser assembly. withstanding maximum line pressure of 10 kg. / cm2. with all fittings , providing erecting 2.5 glycerinefillled pressure gauge etc . , providing erecting 50 mm dia6kg , 6 rigid pvc pipeisi etc. complete. , providing erecting 63 mm x 6.0 kg x 6 mter rigid pvc pipe isietc. complete. , providing erecting drip 63mm pvc ball valve plane type etc. , providing erecting flush valve 2 mm etc. , valve box and accessories : supplying and erection of valve box and there accessories, circular / rectangular model with rugged reinforced plastic constructionand robust top cover with non slippery grips and provisions of snap fit type locking arrangement including all material labour, hydraulic testing and commissioning all complete as per the direction of engineers in charge. , a ) 10 round valve box , b ) 6 round valve box , providing and fixing service saddle , swing joint : ½” x 30 cm ( 12” ) standard swing joint, 4 swing elbows , pressure release valve 2.3 kg / cm2 to 8 kg / cm2 , supply & placing of geotextile seperation barrier to cover the entire field including the edges. geo textile barrier 220 225 gsm , garware make or equivalent make nylon mesh [ 50mm x 50mm ] , 2.5mm thick , fixed volleyball post providing and fixing of standard volleyball fixed pole pair regular model with heavy duty ms pipe, height adjustable for juniors, men or women made of 3x4 pipe epoxy painted comprises a special internal ratchet system comprises a special internal ratchet system with garware tournament quality net ...etc comple and as directed by engineer in charge , supply and installation ofhaving thickness of 6mm comprising of 4mm prefabricated sbr mat followed by 2mm pu coatings. seamless, non porous and smooth surface for very good resiliency for comfort, injury prevention, sustainability through high content of recycled and renewable raw materials in combination with lasting performance through very good mechanical strength, wear resistance and easy maintenance, repair & resurface procedures. system consist ofsbr matt being laid using two component pu adhesive followed by sealer to fill in all the pores of sbr mat, 2 coats of pu resin layer followed by top pu coat and game line marking...etc comple and as directed by engineer in charge , wrestling matt supplying & fixing surface that is approved by world taekwondo federation ( wtf ) . material: xpe, leather with pattern technology improvement: low ratio xpe and dedicated leather with pattern, absorbing energy, great performance of buffering, excellent breathability, soft surface; compounded by fire, connected by toothed edge, more stable.etc comple and as directed by engineer in charge ( tile size of 1m x 1m x 50mm, colour options red, blue, yellow, green ) , judo matt supplying & fixing surface that is approved by world taekwondo federation ( wtf ) . material: xpe, leather with pattern technology improvement: low ratio xpe and dedicated leather with pattern compounding to this new model mat. 8m octagonal competition area is blue, safety area is red. absorbing energy, great performance of buffering, excellent breathability, soft surface; compounded by fire, connected by toothed edge, more stable. ( tile size of 1m x 1m x 50mm, colour options red, blue, yellow, green ) , supply and installation of european origin heterogeneous sports vinyl flooring 6.7mm thickness with sheet width not less than 2.0 metre width jointed with seamless thermo welding laid with suitable premium adhesive@ 0.25kg / m2 over suitable subbase, conforming to manufacturers specifications including line marking for the specific sports area ( basketball court, badminton court, tennis court & gymnasium etc., ) with 2c polyurethane / epoxy marker paint of approved quality and as directed by the engineer in charge. the sports flooring shall be ( i ) bacterial resistant, ( ii ) thermo welding of joints of flooring shall be by heat process to make seamless floor finish, ( iii ) the joints in the flooring shall be sealed by using a pvc welding bar of matching colour using hot air gun. the product shall be floor score, fiba, bwf & ihf certified, its bwf certification shall be of grade 1 ( bwf international elite ) . product should have been installed in top institute of india i.e. iit, nit or equivalent. technical standards of product are as per following; surface finish : xpur scuff resistant surface, backing: combined closed cell foam, weight: 3.6 kg / m2 as per en iso 23997 standards, roll size: 2 meter width x 15 meter length ± 1%, product specification should fall under en 14904 ( category p1 ) , impact sound insulation: 22 db as per en iso717 2 standards thermal resistance: 0.07 m2 k / w, reaction to fire: c fls1, formaldehyde emission: no formaldehyde , pentachlorophenol: no pentachlorophenol, friction: 80 110 as per en 13036 4 standards, shock absorption: >25% en 14808 , vertical deformation: 1.08mm en 14809, ball rebound: 97% as per en 12235, specular gloss: < 30 as per en 2813, dimensional stability: ± 0.2% en iso 23999, indentation resistance: <0.5mm en 1516, resistance to rolling load: 1500 n as per en 1569, colour fastness: 6 iso 105 b02, chemical resistance: no change eniso 26987, abrasion resistance: < 250 mg / 1000cycles as per en iso 5470 1 standards and product is solvent and heavy metal free.....etc complete , supply and installation of european origin heterogeneous sports vinyl flooring 6.7mm thickness with sheet width not less than 2.0 metre width jointed with seamless thermo welding laid with suitable premium adhesive@ 0.25kg / m2 over suitable subbase, conforming to manufacturers specifications including line marking for the specific sports area ( basketball court, badminton court, tennis court & gymnasium etc., ) with 2c polyurethane / epoxy marker paint of approved quality and as directed by the engineer in charge. the sports flooring shall be ( i ) bacterial resistant, ( ii ) thermo welding of joints of flooring shall be by heat process to make seamless floor finish, ( iii ) the joints in the flooring shall be sealed by using a pvc welding bar of matching colour using hot air gun. , the product shall be floor score, fiba, bwf & ihf certified, its bwf certification shall be of grade 1 ( bwf international elite ) . product should have been installed in top institute of india i.e. iit, nit or equivalent. technical standards of product are as per following; , surface finish : xpur scuff resistant surface, backing: combined closed cell foam, weight: 3.6 kg / m2 as per en iso 23997 standards, roll size: 2 meter width x 15 meter length ± 1%, product specification should fall under en 14904 ( category p1 ) , impact sound insulation: 22 db as per en iso717 2 standards , thermal resistance: 0.07 m2 k / w, reaction to fire: c fls1, formaldehyde emission: no formaldehyde , pentachlorophenol: no pentachlorophenol, friction: 80 110 as per en 13036 4 standards, shock absorption: >25% en 14808 , vertical deformation: 1.08mm en 14809, ball rebound: 97% as per en 12235, specular gloss: < 30 as per en 2813, dimensional stability: ± 0.2% en iso 23999, indentation resistance: <0.5mm en 1516, resistance to rolling load: 1500 n as per en 1569, colour fastness: 6 iso 105 b02, chemical resistance: no change eniso 26987, abrasion resistance: < 250 mg / 1000cycles as per en iso 5470 1 standards and product is solvent and heavy metal free. , supply and installation of european origin, fiba, bwf & ihf certified, point elastic polyurethane flooring pulastic classic 110 having thickness of 11mm comprising of 9mm prefabricated sbr mat followed by 2mm pu coatings. seamless, non porous and smooth surface for very good resiliency for comfort, injury prevention, sustainability through high content of recycled and renewable raw materials in combination with lasting performance through very good mechanical strength, wear resistance and easy maintenance, repair & resurface procedures. system consist ofsbr matt being laid using two component pu adhesive followed by sealer to fill in all the pores of sbr mat, 2 coats of pu resin layer followed by top pu coat and game line marking. product should meet european standards en 14904 p1 category, shock absorption: 28% as per en 14808, vertical deformation: 1.4mm as per en 14809, friction value according to en 13036 4 should be on or above 107, ball bounce: 98% according to en 12235, gloss: 5% as per en 2813, resistance to rolling load: = 1500 n as per en 1569, resistance to impact: = 800 gr @ 10°c & = 1200 gr @ 23°c as per en 1517, resistance to indentation: 0, 35 mm @ 5 min & 0, 15 mm @ 24 hrs as per en 1516, resistance to wear: < 340 mg as per en iso 5470, flammability: bfl s2 as per en 13501 1, improvement impact sound insulation ( ?lw ) : 21db according to iso 717 2, v.o.c. content – adhesive / resins solvent free, resin composition free of solvents and heavy metals, elongation at break: structure 150 % as per din 53455, tensile strength: structure 8 n / mm² according to din 53455, tear strength: structure 25 n / mm according to din 53515. consumption of materials has be as per standards which is 0.90kg / sqm adhesive for sbr matt, 0.5kg / sqm sealer, 2.8kg / sqm pu wear coating followed by 0.14kgsqm top pu color coat. product should be manufactured under iso 9001 for quality management , iso 14001 for environmental care and iso 26000 for corporate sustainability. , moveable football goal post competition ( professional ) *made with branded high quality ms steelnpipe in 4 dia *junior football goal post *branded epoxy paint *rust & corrosion free *zero vibration *size options: 24x8 with 1.5 back support. *the poles comprise wheels which make it easy to move , providing and laying geotextiles sheet permeable nonwoven 250 gsm four metre roll width & 100 metre length. , providing and laying iaaf approved synthetic athletics track ( maroon colour ) full pur system minimum 15mm thick iaaf certified system including line marking and attaining class i certificatin from world athletic federation.the world athletic federation certificate must mention the thickness of the product which should be minimum 15mm as per the certificate, the product must be free of volatile organic compound ( report should be attached with the specs ) .full pur system duly world athletic federation certified, spread with sbr ( recycled rubber ) in first 2 layers and coloured epdm granules in final layer must be water impermiable layer consist of bound sub base ( closed asphalt ) , for rubber granules 1 4 mm fixed with a cast coating 5 mm per layer & structured cast coating 3 5 mm spread with epdm 1 4 mm.system should fullfill the following properties water impermiable, porefilled, self leveling, jointless, granulated surface for anti slip properties can handle constant stresses by spikes, dynamic elasticity, excellent appearance & colours, including markings on the surface all complete as per requirements / specifications laid down by world athletic federation & class 1 certification as per iaaf. ( i ) normal stress areas with a minimum thickness of 15 mm of finished tracksurface. , ( ii ) high stress areas with a minimum thickness of 20 mm of finished tracksurface. , ( iii ) high stress areas with a minimum thickness of 25 mm of finished track surface , discus throwing circle aluminium ( aluminium discus circle made of heavy duty aluminium. this can be folded in 2 parts for easy transportation. iaaf certified ) , discus throwing cage ( pole vault inlay & cover ( made of heavy duty 92 mm square steel tube, hot galvanized for long life. poles can be detached from centre for easy transportation and hinged for easy lifting during installation. all poles are bound together with the help of tie bars for sturdiness of the cage. machine knitted 5 mm thick net with square mesh of size 40 mm. net is uv stabilized for long life. steel tube is used on the top of the net to avoid sagging.cage with netting, iaaf certified ) , hammer throwing circle aluminium ( made of thick aluminium alloy in angle type construction. constructed in two halves. best quality nickel plated hardware used for assembling the unit. easy to assemble and can be folded very easily for convenient transportation & storage.iaaf certified ) , discus and hammer throwing cage ( made of heavy duty 100 mm square steel tube, hot galvanized for long life. poles can be detached from centre for easy transportation and hinged for easy lifting during installation. easy to bind the poles together with the help of tie bars for sturdiness of the cage. gates are attached to the poles using four hinges and both gates include wheels for easy movement. net is5 mm thick ( machine knitted ) with 40 mmsquare mesh. net is uv stabilized for long life. steel tube is used on the top of the net to avoid sagging. iaaf certified cage with netting ) , shot put throwing circle aluminium ( made of thick aluminium alloy in angle type construction. constructed in two halves. best quality nickel plated hardware used for assembling the unit. easy to assemble and can be folded very easily for convenient transportation & storage.iaaf certified ) , take off board system ( latest design take off board system, made of solid wood. welded aluminium tray protects take off area and facilitates easy replacements of take off board and plasticine board. comes with heavy construction aluminium blanking lid for durability.iaaf certified ) , triple jump take off board system ( stop board made of fibre designed for depressed pad.iaaf certified ) , fibre stop board competition ( stop board made of fibre designed for depressed pad.iaaf certified ) , water barriers ( heavy duty foldable beam made square pipe inside & covered with thick water proof solid plywood. base legs & base made of steel square pipe with spring loaded snap lock system for easy adjustment of three different required heights. 762m.m. , 838m.m. , 914 m.m. legs are fitted into sockets grouted in to the ground. painted with premium quality poly urethane paint for longer life & durability. easy to install & foldable to transport.iaaf certified ) , pole vault box competition ( welded stainless steel construction. comes with blanking board made of aluminium. sockets at bottom for drainage of water.iaaf certified ) , track kerbing ( heavy gauge aluminium features a box profile top. held in place by 10 mm tall ribbed feet. raised 10 mm off the track surface for rapid drainage. each section of kerbing is milled to allow easy drop in or removal of corresponding sections. available in raw or anodized finish. iaaf certified ) , construction of various play courts ( i, e, volley ball, kho kho, kabbadi, etc ) as per detailed drawing and direction of engineer in charge consisiting of various layers i.e. 150mm thick compacted rubble soling, 50mm thick hard murum layer, 100mm thk 1 layer of brick on edge including filling gaps in sinders of brick bats, 30mm thk , loose 20mm thk compacted mother soil ( including 30% black soil, 40% sand, 30% garden soil, including screening in 6mm jali & laying in layer by layer with rolling by light roller ) including compacting and curing and even and well levelled surface to be given with wet lime marking and all other relevant details as per above said norms etc. complete. , construction of sand filling in jumping pits, including cost and conveyance of all materials and labour charges to the site to fill the sand in pits and complete finished item as per drawing and as directed by engineer incharge. , construction of steeplecase pit insided portion as per iaaf drawingand as directed by engineer in charge , supplying & laying of artificial turf for football: proviiding, supplying & installing on site extreme wear resistant football turf with expected life of 10 12 years. product should pass 60, 000 cycles of lisport xl test ( highest for any sports turf in india currently ) of hero make or equivalent. berlin hero 18, 000 dtex, pile height 50mm, 18, 000 dtex, double pp + pu backing + mesh, 14 / 10cm stitches, density 8820, roll size 4m x 30m or as specified, diamond shape grass. fifa licensee supplier product. roll size 4m x 30m or as specified, warrantee upto 8 years, product passes 60, 000 cycles in lisport xl test....
40135145 tender for provision of volleyball and basketball court at icgas ratnagiri...
40115849 bids are invited for construction of basketball court with synthetic surface (q3) total quantity : 1...
39918761 bids are invited for provision and improvement of sports facilities excavation of earth work , providing and laying cement concrete , preparation of existing ground , supply and installation of sit down werstling table , providing and fixing horizontal bar , providing and fixing outdoor double bar , constructing masonry chamber , providing painting and marking of cc basketball court , supplying and spreading finely sieved sand , supplying and stacking clayey soil or loamy soil , spreading of clayey soil loamy soil , supply and installation of volleyball referee chair , supply and installation of badminton referee chair , supplying of mild steel single wheel hoe , provision and sticking of vinyl stickers , steel work for temporary boundary , supplying and fixing green nylon net , providing and fixing polyster flag with polls , providing and fixing football corner flags , providing and placing cricket ground boundary rope total quantity : 5469...
39771526 bids are invited for procurement and installation of synthetic flooring of basketball court ( q3 ) total quantity : 1...
39721674 providing lighting arrangement for volleyball court, kabaddi court, main gate, basketball court and skating rink at ptaaf complex and volleyball court at western sector, anushaktinagar, mumbai 94...
39703522 tender for providing lighting arrangement for volleyball court, kabaddi court, main gate, basketball court & skating rink at ptaaf complex and volleyball court at western sector, anushaktinagar, mumbai 94....
39687555 bids are invited for provision and improvement of sports facilities excavation of earth work , providing and laying cement concrete , preparation of existing ground , supply and installation of sit down werstling table , providing and fixing horizontal bar , providing and fixing outdoor double bar , constructing masonry chamber , providing painting and marking of cc basketball court , supplying and spreading finely sieved sand , supplying and stacking clayey soil or loamy soil , spreading of clayey soil loamy soil , supply and installation of volleyball referee chair , supply and installation of badminton referee chair , supplying of mild steel single wheel hoe , provision and sticking of vinyl stickers , steel work for temporary boundary , supplying and fixing green nylon net , providing and fixing polyster flag with polls , providing and fixing football corner flags , providing and placing cricket ground boundary rope total quantity : 5469...
39471950 tender for resurfacing and repair to existing volleyball court and basketball court => limited; 1 laying of synthetic five layer all weather synthetic cushion surface on existing volleyball court ( size 6954 sq ft ) ( as per rfp technical specifications ) 2 layingh of synthetic five layer all weather synthetic cushion surface on existing basket court ( size 6542 sq ft ) ( as per rfp technical specifications ) ...
38692284 bids are invited for basketball court on existing cemented court (q3) , volleyball court on existing cemented court (q3) , tennis court on existing cemented court (q3) , new volleyball court (q3) total quantity : 11...
38649344 bids are invited for basket ball court constr of acrylic synthetic basketball court incl all accessories this installation total quantity : 1...
38514316 providing and construction of basketball court kabbadi ground vollyball ground and other sports facilities in s no 99 101 102 vijaynagar res.no641 at rahataniin chinchwad vidhansabha...
38108862 proposed preparation of basketball court...
37875841 extra work for basketball court in major dhyanchand stadium at m.g.a.h.v. wardha...
37615244 bids are invited for creation of synthetic basketball court synthetic basketball court total quantity : 1...
37300893 proposed preparation of basketball court at district sports complex latur , work portion ( a ) , excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. ( lift upto 1.5 m. ) by mechanical means , filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. complete. , supplying hard murum / kankar at the road site, including conveying and stacking complete. , supplying soft murum at the road site, including conveying and stacking complete. , providing dry / trap / granite / quartzite / gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. , providing and laying cast in situ / ready mix cement concrete in m20 of trap / granite / quartzite / gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, steel centering, formwork, laying / pumping , compacting, roughening them if special finish is to be provided, finishing uneven and honey combed surface and curing etc. complete. the cement mortar 1:3 plaster is considered for rendering uneven and honey combed surface only. newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. ( wooden centeringwillnotbeallowed. ) , withfullyautomaticmicroprocessorbasedplcwithscadaenabledreversibledrumtypemixer / concretebatch mix plant ( pan mixer ) etc. complete. with fine aggregate ( crushed sand vsi grade ) , providing and fixing in position tmt fe 500 bar reinforcement of various diameters for r.c.c. pilecaps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. , providing and laying concrete pipes of i.s.np. class of 150mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete. , providing and laying concrete pipes of i.s.np. class of 225mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete. , providing and constructing brick masonry inspection chamber 90cm x 45cm with r.c.c. raft in b.c. soil area including cost of reinforcement, 1:2:4 cement concrete channels half round g.s.w. pipes, brick masonry, plastering from inside and airtight with 75 mm thick r.c.c. cover medium duty 140 kg etc. complete. , providing and laying in walls / ceilings / floors 20 mm dia. medium grade having embossed as isi mark galvanised iron pipes of 1.63 kilogram / metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti corrosive oil paint, 2 coats complete. including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in pwd chowky or as directed etc. complete. , providing and laying in walls / ceilings / floors 25 mm dia. medium grade having embossed as isi mark galvanised iron pipes of 2.49 kilogram / metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti corrosive oil paint, 2 coats complete. including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in pwd chowky or as directed etc. complete. , providing and laying in walls / ceilings / floors 32 mm dia. medium grade having embossed as isi mark galvanised iron pipes of 3.20 kilogram / metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti corrosive oil paint, 2 coats complete. including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in pwd chowky or as directed etc. complete. , providing and fixing c.p. two way bib cock of approved make continental including necessary sockets / union nut etc. complete. , open graded premix surfacing providing and laying ogc 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates premixed with bituminous binder transported to site with vts , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction but excluding prime / tack and seal coat. for bitumen of specified grade using drum mix type hot mix plant with scada, paver and vibratory roller ( over mpm surface ) ( vg 30 bulk bitumen rates are considered to arrive at rates ) , providing bituminous type a liquid seal coat on bituminous surface including supplying all materials and bitumen of specified gradepreparing existing road surface, heating and applying bitumen @ 0.98 kgsqm. by mechanical means, spreading chips and rolling, by static roller having weight 8 to 10 mt. etc. complete. ( vg 30 bulk bitumen rates are considered to arrive at rates ) , providing and fixing synthetic and tennis court on black toping surface, before applying synthetic. cleaning the existing surface by water and then apply entire area with one coat of primer and punding and coacked surface are afillingn with binder and then apply resurfaces black and then apply three coat of synthetic, game line marking a fixing tennis pole and net and as directed by engineer incharge rate are including of all taxes and transportation of material to work slope. ( rate sanctioned by s.e vide letter no. osm / pwc / bldg / 4243 dated 29 / 06 / 2016 ) , providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted / welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. , providing and fixing crimped with g.i. mesh and size 20 mm x 20 mm 10 guage to iron angle frame including welding crimp mesh to angle frame and steel flat, fixing the frame in its original position and oil painting etc.complete ( excluding cost of structural steel ) , providing structural steel work in hollow section of various thickness and sizes in square, rectanular and round shape from 25mm to 450mm section as per is 4923 yst310 grade produced from iron ore and blast furnacer out etc. as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted / bolted / welded connections and painting complete. , testing charges ( b ) , charges for testing if material in vigilance & quality control laboratory for cement ( standard consistancy fineness, specific gravity, setting time ( initial & final ) compressive strngth, soundness ) , electrical charges ( c ) , supplying and erecting led flood light fitting of 150w, including lamp, with pf > 0.95, class ip 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification no fgodf / fls 2 , ( cable 4x10 sq.mm. ( 7.2.33 ) supplying, erecting & terminating xlpe armoured cable 4 core 10 sq. mm. copper conductor continuous 5.48 sq. mm. ( 12 swg ) g.i. earth wire complete erected with glands & lugs, on wall / trusses / pole or laid in provided trench / pipe as per specification no. cblt / cu , supplying & erecting water tight terminal box of cast iron of size 300 x 200 x 150 mm complete on pole as per specification no. cb sb , supplying and erecting street light bracket for erection of double fitting made from 40 mm. dia ‘b’ class g.i. pipe 1.0 m in length along with pole cap of 300 mm length 100 mm dia duly welded as per specification no. fgbkt / bpc , mains 1x2.5 sq.mm. ( 1.3.3 ) supplying & erecting mains with 2x2.5 sq.mm f.r copper pvc insulated wire laid in provided conduit / trunking / inside pole / bus bars or any other places. as per specification no: wgma / bw , mcb tp 40 a to 63 a ( 5.3.15 ) supplying, erecting & marking tpmcb 40a to 63a in provided distribution board as per specification no. sw swr / mcb , tpndb ( 5.4.1 ) supplying and erecting triple pole and neutral distribution board ( tpndb ) surface / flush mounted suitable for spmcb of 12 ways on iron / gi frame ( horizontal busbar type ) as per specification no. sw swr / mcbdb , pipe type earthing ( 9.1.4 ) providing pipe type earthing with 40mm. dia. g.l. pipe or 20 mm dia. g.l. rod complete with all materials as per specification no. ea ep , trench ( 16.1.2 ) making trench of suitable width and depth in hard murum / tar road for laying provided lt cable up to and including 16 sq. mm complete as per specification no. cw exn ctr , earth plate ( 9.1.3 ) providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block c.l. cover complete with all materials, testing & recording the results as per specification no. eaep , g.i. pipe ( 7.6.2 ) supplying & erecting g.i. pipe ‘a’ class 40 mm dia. erected for enclosing xlpe armoured cable on wall / pole as per specification no. cb ce , add 5% contingencies , add 2% consultant fees , add 18% gst , add 0.1% labour insurance...
37023667 bids are invited for basketball court with pp tiles ( q3 ) , volleyball court with yarn carpet ( q3 ) total quantity : 2...
36950556 tender for for pcc work, synthetic coating & netting for basketball court at powai jal vayu vihar sector a csh ltd....
36949378 extra work for basketball court in major dhyanchand stadium at m.g.a.h.v. wardha...
36938301 bids are invited for services synthetic surfacing of basketball court...
36795488 bids are invited for existing basketball court repairs to flooring and five layer painting of existing basketball court work repairs to flooring and five layer painting to total quantity : 544...
36356999 bids are invited for construction of basketball court asphalt base for outdoor synthetic basketball court , support wall , synthetic all weather surface for basketball court 8 layer cushion material , led flood light system , chain link fencing , complete basketball accessories with supply and fixing total quantity : 13442...
36290540 bids are invited for basketball court on existing cemented court (q3) , new volleyball court (q3) , tennis court on existting cemented court (q3) , volleyball court on existing cemnted court (q3) total quantity : 11...
36065691 tender for pune peth kharadi s.no. municipal school no. in 15 / 2 / 1 / 1. badminton court 03, basketball court 2, gymnasium 02, aerobics / yoga hall 02 nos in school stadium at 181...
36054624 extra work for basketball court in major dhyanchand stadium at m.g.a.h.v. wardha...
35699573 bids are invited for construction of two basketball courts and one volleyball court and allied accessories total quantity : 1...
35545860 bids are invited for basketball court base preparation and laying of asphlat base , asphalting , synthetic surface , basketball court accessories total quantity : 4...
35296227 tender for colaba badhwar park: repairs to basketball court by providing acrylic synthetic cushion ( 8 layers ) ....
35227263 e quotation notice no.09 for 2022 23 e rate quotation non dsr item for preparation of estimate of construction of district sports complex at nashik and mla / mp works / special fund works, under other verious heads works in the jurisdiction of executive engineer, p.w. division, nashik , providing and laying cast in situ / ready mix cement concrete m 40 post tensioning in pt slabs & pt beams for the loading as mentioned in relevant drawing as per the technical specifications including decoiling the strands, cutting to the required lenghts, supplying & laying of ht strands ( tata make ) , sheating ( gi ducts ) , jointing with couplers & inserting the strands, profiling, fixing live end anchorages including the supply of stressing anchorages, grout vents, making dead end anchorages including flowering the strands, fixing tendon support bars, supervising the fixing of anti bursting reinforcement, stressing the cable end trimming, grouting the cables with cement slurry mixed with approved admixtures with required tools , plants, machineries & consumables etc. including demarcationon soffit of the slab with 100 wide red paint indicating cable profiles, including obtaing approval from client / consultant for the work doneof trap / granite / quartzite / gneiss metal for r.c.c. slabs and landingsas per detailed designs and drawings includingcentering , formwork, cover blocks, laying / pumping, compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, ( excluding reinforcement and structural steel ) with fully automatic micro processor based plc with scada enabled reversible drum type mixer / concrete batch mixplant ( pan mixer ) etc. complete, with fine aggregate ( crushed sand v.s.i. grade ) . including , fixed volleyball post providing and fixing of standard volleyball fixed pole pair regular model with heavy duty ms pipe, height adjustable for juniors, men or women made of 3x4 pipe epoxy painted comprises a special internal ratchet system comprises a special internal ratchet system with garware tournament quality net ...etc comple and as directed by engineer in charge , supply and installation ofhaving thickness of 6mm comprising of 4mm prefabricated sbr mat followed by 2mm pu coatings. seamless, non porous and smooth surface for very good resiliency for comfort, injury prevention, sustainability through high content of recycled and renewable raw materials in combination with lasting performance through very good mechanical strength, wear resistance and easy maintenance, repair & resurface procedures. system consist ofsbr matt being laid using two component pu adhesive followed by sealer to fill in all the pores of sbr mat, 2 coats of pu resin layer followed by top pu coat and game line marking...etc comple and as directed by engineer in charge , wrestling matt supplying & fixing surface that is approved by world taekwondo federation ( wtf ) . material: xpe, leather with pattern technology improvement: low ratio xpe and dedicated leather with pattern, absorbing energy, great performance of buffering, excellent breathability, soft surface; compounded by fire, connected by toothed edge, more stable.etc comple and as directed by engineer in charge ( tile size of 1m x 1m x 50mm, colour options red, blue, yellow, green ) , judo matt supplying & fixing surface that is approved by world taekwondo federation ( wtf ) . material: xpe, leather with pattern technology improvement: low ratio xpe and dedicated leather with pattern compounding to this new model mat. 8m octagonal competition area is blue, safety area is red. absorbing energy, great performance of buffering, excellent breathability, soft surface; compounded by fire, connected by toothed edge, more stable. ( tile size of 1m x 1m x 50mm, colour options red, blue, yellow, green ) , supply and installation of european origin heterogeneous sports vinyl flooring 6.7mm thickness with sheet width not less than 2.0 metre width jointed with seamless thermo welding laid with suitable premium adhesive@ 0.25kg / m2 over suitable subbase, conforming to manufacturers specifications including line marking for the specific sports area ( basketball court, badminton court, tennis court & gymnasium etc., ) with 2c polyurethane / epoxy marker paint of approved quality and as directed by the engineer in charge. the sports flooring shall be ( i ) bacterial resistant, ( ii ) thermo welding of joints of flooring shall be by heat process to make seamless floor finish, ( iii ) the joints in the flooring shall be sealed by using a pvc welding bar of matching colour using hot air gun. the product shall be floor score, fiba, bwf & ihf certified, its bwf certification shall be of grade 1 ( bwf international elite ) . product should have been installed in top institute of india i.e. iit, nit or equivalent. technical standards of product are as per following; surface finish : xpur scuff resistant surface, backing: combined closed cell foam, weight: 3.6 kg / m2 as per en iso 23997 standards, roll size: 2 meter width x 15 meter length ± 1%, product specification should fall under en 14904 ( category p1 ) , impact sound insulation: 22 db as per en iso717 2 standards thermal resistance: 0.07 m2 k / w, reaction to fire: c fls1, formaldehyde emission: no formaldehyde , pentachlorophenol: no pentachlorophenol, friction: 80 110 as per en 13036 4 standards, shock absorption: >25% en 14808 , vertical deformation: 1.08mm en 14809, ball rebound: 97% as per en 12235, specular gloss: < 30 as per en 2813, dimensional stability: ± 0.2% en iso 23999, indentation resistance: <0.5mm en 1516, resistance to rolling load: 1500 n as per en 1569, colour fastness: 6 iso 105 b02, chemical resistance: no change eniso 26987, abrasion resistance: < 250 mg / 1000cycles as per en iso 5470 1 standards and product is solvent and heavy metal free.....etc complete , supply and installation of european origin heterogeneous sports vinyl flooring 6.7mm thickness with sheet width not less than 2.0 metre width jointed with seamless thermo welding laid with suitable premium adhesive@ 0.25kg / m2 over suitable subbase, conforming to manufacturers specifications including line marking for the specific sports area ( basketball court, badminton court, tennis court & gymnasium etc., ) with 2c polyurethane / epoxy marker paint of approved quality and as directed by the engineer in charge. the sports flooring shall be ( i ) bacterial resistant, ( ii ) thermo welding of joints of flooring shall be by heat process to make seamless floor finish, ( iii ) the joints in the flooring shall be sealed by using a pvc welding bar of matching colour using hot air gun. , the product shall be floor score, fiba, bwf & ihf certified, its bwf certification shall be of grade 1 ( bwf international elite ) . product should have been installed in top institute of india i.e. iit, nit or equivalent. technical standards of product are as per following; , surface finish : xpur scuff resistant surface, backing: combined closed cell foam, weight: 3.6 kg / m2 as per en iso 23997 standards, roll size: 2 meter width x 15 meter length ± 1%, product specification should fall under en 14904 ( category p1 ) , impact sound insulation: 22 db as per en iso717 2 standards , thermal resistance: 0.07 m2 k / w, reaction to fire: c fls1, formaldehyde emission: no formaldehyde , pentachlorophenol: no pentachlorophenol, friction: 80 110 as per en 13036 4 standards, shock absorption: >25% en 14808 , vertical deformation: 1.08mm en 14809, ball rebound: 97% as per en 12235, specular gloss: < 30 as per en 2813, dimensional stability: ± 0.2% en iso 23999, indentation resistance: <0.5mm en 1516, resistance to rolling load: 1500 n as per en 1569, colour fastness: 6 iso 105 b02, chemical resistance: no change eniso 26987, abrasion resistance: < 250 mg / 1000cycles as per en iso 5470 1 standards and product is solvent and heavy metal free. , supply and installation of european origin, fiba, bwf & ihf certified, point elastic polyurethane flooring pulastic classic 110 having thickness of 11mm comprising of 9mm prefabricated sbr mat followed by 2mm pu coatings. seamless, non porous and smooth surface for very good resiliency for comfort, injury prevention, sustainability through high content of recycled and renewable raw materials in combination with lasting performance through very good mechanical strength, wear resistance and easy maintenance, repair & resurface procedures. system consist ofsbr matt being laid using two component pu adhesive followed by sealer to fill in all the pores of sbr mat, 2 coats of pu resin layer followed by top pu coat and game line marking. product should meet european standards en 14904 p1 category, shock absorption: 28% as per en 14808, vertical deformation: 1.4mm as per en 14809, friction value according to en 13036 4 should be on or above 107, ball bounce: 98% according to en 12235, gloss: 5% as per en 2813, resistance to rolling load: = 1500 n as per en 1569, resistance to impact: = 800 gr @ 10°c & = 1200 gr @ 23°c as per en 1517, resistance to indentation: 0, 35 mm @ 5 min & 0, 15 mm @ 24 hrs as per en 1516, resistance to wear: < 340 mg as per en iso 5470, flammability: bfl s2 as per en 13501 1, improvement impact sound insulation ( ?lw ) : 21db according to iso 717 2, v.o.c. content – adhesive / resins solvent free, resin composition free of solvents and heavy metals, elongation at break: structure 150 % as per din 53455, tensile strength: structure 8 n / mm² according to din 53455, tear strength: structure 25 n / mm according to din 53515. consumption of materials has be as per standards which is 0.90kg / sqm adhesive for sbr matt, 0.5kg / sqm sealer, 2.8kg / sqm pu wear coating followed by 0.14kgsqm top pu color coat. product should be manufactured under iso 9001 for quality management , iso 14001 for environmental care and iso 26000 for corporate sustainability. , moveable football goal post competition ( professional ) *made with branded high quality ms steelnpipe in 4 dia *junior football goal post *branded epoxy paint *rust & corrosion free *zero vibration *size options: 24x8 with 1.5 back support. *the poles comprise wheels which make it easy to move , providing and laying geotextiles sheet permeable nonwoven 250 gsm four metre roll width & 100 metre length. , supply & installation of iaaf european track sandwich system which should have been officially recommended & certified by world athletics ( earlier known as iaaf ) federation to use in all international athletics competition. a seamless, water impermeable running track system having base layer with sbr ( cast in situ ) that is being entirely adhered to the asphalt base by means of a specially developed polyurethane adhesive and sbr granules.consumption rate over dense asphalt are 7.0 kg / m² for sbr and 1.45 kg / m² of pu binder. priming over asphlat should be at 0.20 kg / m², pu material for wear layer to be used 2.3 kg / m² of polyurethane. product should be tested and certified as per iaaf & en 14877 norms. track should have a overall thickness of 14.5 mm ( + / 4% max tolerance ) with the 11 mm of the base layer and 3 mm of wear layer. manufacturer should be from europe ( no asian / turkey ) and his products should have been used for european championships. surface average technical standards should include 0.86 mpa / mm tensile strength, 77% elongation at break, 41 % force reduction at 39.60c, 1.8 mm vertical deformation at 39.60c, should be spike resistance, average friction value of system should be 65. wear coat to be applied “wet in wet” and homogeneous. epdm granules are to be broadcasted into wet polyurethane wear coat. supply rate should be 3.6 kg / m². excess epdm is to be removed after polyurethane wear coat is cured ( this excess quantity is returnable to supplier ) . epdm content in wearing surface after removal of excess granules should be 2.8 kg / m² net. physical properties of applied system in compliance with test report.normal stress areas with a minimum thickness of 14.5mm of finished track surface. , discus throwing circle aluminium ( aluminium discus circle made of heavy duty aluminium. this can be folded in 2 parts for easy transportation. iaaf certified ) , discus throwing cage ( pole vault inlay & cover ( made of heavy duty 92 mm square steel tube, hot galvanized for long life. poles can be detached from centre for easy transportation and hinged for easy lifting during installation. all poles are bound together with the help of tie bars for sturdiness of the cage. machine knitted 5 mm thick net with square mesh of size 40 mm. net is uv stabilized for long life. steel tube is used on the top of the net to avoid sagging.cage with netting, iaaf certified ) , hammer throwing circle aluminium ( made of thick aluminium alloy in angle type construction. constructed in two halves. best quality nickel plated hardware used for assembling the unit. easy to assemble and can be folded very easily for convenient transportation & storage.iaaf certified ) , discus and hammer throwing cage ( made of heavy duty 100 mm square steel tube, hot galvanized for long life. poles can be detached from centre for easy transportation and hinged for easy lifting during installation. easy to bind the poles together with the help of tie bars for sturdiness of the cage. gates are attached to the poles using four hinges and both gates include wheels for easy movement. net is5 mm thick ( machine knitted ) with 40 mmsquare mesh. net is uv stabilized for long life. steel tube is used on the top of the net to avoid sagging. iaaf certified cage with netting ) , shot put throwing circle aluminium ( made of thick aluminium alloy in angle type construction. constructed in two halves. best quality nickel plated hardware used for assembling the unit. easy to assemble and can be folded very easily for convenient transportation & storage.iaaf certified ) , take off board system ( latest design take off board system, made of solid wood. welded aluminium tray protects take off area and facilitates easy replacements of take off board and plasticine board. comes with heavy construction aluminium blanking lid for durability.iaaf certified ) , triple jump take off board system ( stop board made of fibre designed for depressed pad.iaaf certified ) , fibre stop board competition ( stop board made of fibre designed for depressed pad.iaaf certified ) , water barriers ( heavy duty foldable beam made square pipe inside & covered with thick water proof solid plywood. base legs & base made of steel square pipe with spring loaded snap lock system for easy adjustment of three different required heights. 762m.m. , 838m.m. , 914 m.m. legs are fitted into sockets grouted in to the ground. painted with premium quality poly urethane paint for longer life & durability. easy to install & foldable to transport.iaaf certified ) , pole vault box competition ( welded stainless steel construction. comes with blanking board made of aluminium. sockets at bottom for drainage of water.iaaf certified ) , track kerbing ( heavy gauge aluminium features a box profile top. held in place by 10 mm tall ribbed feet. raised 10 mm off the track surface for rapid drainage. each section of kerbing is milled to allow easy drop in or removal of corresponding sections. available in raw or anodized finish. iaaf certified ) ...
35172092 bids are invited for up gradation of multiple sports facilities basketball court, futsal court and volleyball court ( q3 ) total quantity : 1...
35092996 bids are invited for construction of two basketball courts and one volleyball court and allied accessories ( q3 ) total quantity : 1...
34840151 providing illumination for tennis court and basketball court including cable work at sports ground for nibm pune....
34834997 tender for construction of basketball court at boys and girls hostel....
34560861 bids are invited for up gradation of multiple sports facilities basketball court, futsal court and volleyball court (q3) total quantity : 1...
33949839 supply of colaba ( badhwar park ) : repairs to basketball court by providing acrylic synthetic cushion ( 8 layers ) .colaba ( badhwar park ) : repairs to basketball court by providing acrylic synthetic cushion ( 8 layers ) ., ...
33418401 bids are invited for construction of acrylic synthetic basketball court total quantity : 6...
33240642 tender for construction of synthetic basketball court....
32926011 bids are invited for basketball court on existing cemented court (q3) , volleyball court on existing cemnented court (q3) , tennis court on existing cemenented court (q3) , new volleyballcourt (q3)mse total quantity : 11...
32314488 tender for running contract of basketball court...
32150124 creation of lawn tennis court, basketball court, volley ball court and fencing work at sainik school, satara, maharashtra creation of lawn tennis court, basketball court, volley ball court and fencing work at sainik school, satara, maharashtra...
31887942 bids are invited for procurement & installation of led lights poles with associated items for four basketball courts (q3) total quantity : 1...
31580959 construction of basketball court...
31234306 a)construction of tennis court at krida sankul anthurne, b) construction of basketball court at krida sankul anthurne, c) construction of stage at krida sankul anthurne, d) construction of pavilion at krida sankul anthurne tal. indapur, dist. pune...
31229801 a ) construction of tennis court at krida sankul anthurne b ) construction of basketball court at krida sankul anthurne c ) construction of stage at krida sankul anthurne d ) construction of pavilion at krida sankul anthurne tal. indapur dist. pune...
31115035 tender notice document basket ball construction of 02 basketball court in major dhyanchand stadium in campus...