Shivaji University - Maharashtra

34104583 purchase of digital penetration of grease apparatus, automatic anilline point apparatus, digital bomb calorimeter...

Ordnance Factory - Maharashtra

33045778 annual maintenance contract for bomb calorimeter for one year as per the specification terms and conditions attached qty 01 wj...

Department Of Defence Research And Development - Maharashtra

31271930 amc of bomb calorimeter as per specificaiton 1 ) amc of bomb calorimeter as per specification no. hemrl / gps / ge / jan22 / 01 2 ) amc of refractometer as per specification no. hemrl / gps / gr / jan22 / 02 3 ) amc of pycnometer as per specification no. hemrl / gps / gr / jan22 / 03 => limited...

Dr. Babasaheb Ambedkar Marathwada University - Maharashtra

30638223 supply of laboratory equipment ( part a ) at gopinathrao munde national institute of rural development, dr.babasaheb ambedkar marathwada university, aurangabad 2 cooling centrifuge machine• maximum speed: 20, 000rpm, • maximum relative centrifugal force: 30642xg, • maximum capacity: 4× 10ml, 4 x20 ml.• speed accuracy ±20rpm, • led display• temperature: 40 c 3 laboratory centrifuge machine ( bench top ) • maximum speed: 10, 000rpm, • maximum relative centrifugal force: 30642xg, • maximum capacity: 4× 400ml with rotor, • speed accuracy ±20rpm, • led display• voltage: 220 2230 v 4 homogenizer• 850 watt motor• variable speed from 5, 000 to 25, 000 rpm• volume range from 250ul to 5l• quiet operation• compatible with omni tip plastic generator probes• wide range of stainless steel generator probes available from 5 to 30 mm in diameter.• noise level: < 72 db 5 soxhlet apparatus 01 • no. of samples: 04• volume of extracting flask: 150ml each• extracting sample amount: 0 – 5g• rated voltage: 220v+10v, 50hz• electric heating power: minimum 300w• led display 6 analytical balance with anti vibration sheet• maximum capacity:210 gms, • least count 0.00001 g ( .01mg ) • readability: 0.1mg ( 0.0001 gm ) , • repeatability : 0.1 mg, • linearity : 0.3 mg• platform size: minimum 90 mm dia.• cal weight span : 100 / 200 gms• must have weigh below hook, • rs 232 connection to transfer the data to printer / pc. 7 physical / regularbalance• weighing capacity: 1 g to 10 kg• arrestment: vertical, • sensitivity: 0.2 mg, • pans: chromium plated• led display 8 heating mantles 06• round bottom flasks capacity to hold 500 ml• maximum operating temp range.: rt to 300 °c• voltage supply: 220 v• power: 800 w• operation time: continuous 9 hot air oven• temperature range 35°c to 150°c• temperature accuracy ±05°c or better• temperature sensor: pid temperature controller• temperature controller display of sv & pv• internal dimensions ( mm ) minimum 420×395×350• power supply 220 230 v• inner body made up of stainless steel 10 hot plate• temperature ( deg. celsius ) rangert to 350°c• rating1.2 kw to 3.5 kw• sizeminimum 10x12 to 18x24 11 digital ph meter• ph range: ph 0 to 14.00, mv 0to± 1999.• display: 3.5 digit led.• resolution: 0.001 ph, • accuracy: ph ± 0.01, mv ± 1 mv.• temp. compensation : 00 – 1000c / auto manual sensor• ph electrode, pt100, • slope control 80 120%, 12 binocular microscope 06 • magnification: 10x 100x for visual observation. eyepiece tubes: binocular tube• siedentop type ( 30°, ip distance 55 75mm, 360° rotatable ) . –• eyepieces: wf 10x ( f.o.v. ) • illumination: 3w led with variable rheostat control and on / off switch.110v~220v external auto switching power supply• specimen stage: large 140mm x 135mm stage ( 5.5 x 5.25 ) , with professional quality, built in, low profile, ball bearing mounted• total magnification: 40x, 100x, 400x, 1000x. 13 dissecting stereo microscope• head: 45° inclined binocular, • wide field eyepiece: 10x• objectives: 2x & 4x, • dioptre adjustment: + / 5dp• interpupillary distance: 2 3 / 16 2 15 / 16 ( 55 75mm ) • working distance: 2 1 / 8 ( 53mm ) , • frosted glass objective plate: 3 3 / 4 ( 95mm ) in diameter white / black plastic objective plate: 3 3 / 4 ( 95mm ) in diameter• the magnification power of a dissecting microscope ranges from 5x 80x 14 autoclave ( vertical ) • working pressure :15 to 20 psi• working temperature: 121°c to 125°c• controller :auto set to 15psi & 121°c• hydraulic tested: hydraulically tested up to 40 psi• chamber volume: 20 200 liter• material: stainless steel• temperature range: 1320 c• pressure range: 0.165 mpa 15 incubator• internal volume [ litres ) minimum 450 liter, , • number of tray minimum 5• internal dimensions ( mm ) 660 x 655 x 1050• temp. range &accuracy 5°c to 60°c, ± 0.5°c• temp. control microprocessor with pt 100 sensor• humidity range 40% to 95%, ± 3%• display 1 7 segment, big size led• voltage stabilizer vs 04• electrical 220 240 volts, 50hz. 16 digital thermo hygrometer• temperature range : 50 ~ 70oc ( 58 ~ +122of ) • temperature accuracy: ± 1.00c or ± 1.80f• humidity range: 10% to 99% rh• accuracy: ± 5% ( 35%~75% ) • resolution : 0.1oc ( 0.1of ) • resolution : 1% rh• power supply : 1.5 v ( aaa size ) x 1 17 rotary microtomes• feed adjustment: 1 25 micrometre• dimension: 30 x 33 x 28 cm• thickness: 1 micrometre• total feed excursions: 28 mm 18 barometer with digital thermometer• measuring range: 945 to 1, 045 hpa ( black scale ) 710 to 780 mmhg ( red scale ) • min. graduation: 1 hpa / 1 mmhg• accuracy: ±1 hpa at 980 to 1, 020 hpa ±3 hpa at other range• temperature measuring range: 0 to 50°c• resolution: 0.1°c• accuracy: ±1°c ( at 0 to 40°c ) ±2°c at other range dimensions: ø135 x 33 ( d ) mm• accessories: bracket ( ø160 x 4 ( d ) mm ) . 19 magnetic stirrer with hot plate • platform size :? 137 mm• time range :1 min ~ 99 h 59 min• temp range: rt to minimum 300 oc• temperature stability :± 3 °c 20 muffle furnace• double shell case• high purity insulation material • bench top model.• swing type door with handle with lock & key• max. temperature : 12000c• heating element :silicon carbide rods and mosi2 ( molybdenum disilicate ) • temp. accuracy: + / 10c ( + / 1.80f ) • controller pid• dimension: 5×5×10 inches, volume: min.4 lit. 21 conductivity meter• measuring range0.1 to 10 w / mk• accuracy: ± 2 %• reproducibility± 1.5 %• heater current precision± 0.01 %• duration of 1 measurement 60 / 80 / 240 s• dimensions 471 x 160 x 391 mm• weight 11.2 kg• ports serial port ( com port ) • usb port with usb to serialconverter ( included ) 22 laminar flow• velocity: 90 fpm ±20%, • hepa filter: 99.999 % efficiency for particles >0.3 μm, pre filter: 85 %efficiency for particles >0.5 μm, • cabinet: laminated high quality wooden board / pcrc sheet powder coated / stainless steel ss 304 ( optional 316 grade ) , • airflow velocity : average of 0.3 to 0.5 m / s• dimension external:1300×750×2040mm, • dimension internal: 1200×645×610mm 23 nephelo meter• range: 5 rangesmg / l• temperature range: 0 100 °c• accuracy: ± 3 % f s ± 1• dimension: width × height ( 245 mm ×125 mm ) 24 double distillation apparatus• distillation unit output: 3litre / hr, 5litre / hr• heater load: 1 kw each• heater material: ceramic with spiral element• heater tube:quartz / silica glass 25 bulk density apparatus ( digital ) • microprocessor based 4 digit preset counter 30 strokes per minutes, • strokes height 50 mm, • ram 150ml 26 moisture balance• heat drying and weight loss, • temp. range 30 2000c, • capacity 60 120g / min. • display reading 0.001g, • drying heater mid –wave infrared quartz heater 27 refrigerator• double door refrigerator• capacity of refrigerator: minimum 300 liter• temperature range 0 to 10°c• freezer: minimum 80 liter• temperature of freezer: 10 to 20 °c• inverter technology compressor• inbuilt voltage stabiliser• control panel for various settings 28 digital refracto meter• digital hand held refractometer• measuring range 0.0 99.0 brix, • resolution brix 0.1%, • measurement accuracy brix + / 0.1%, • measurement temperature 5 400c, • automatic temperature compensation, • power supply 006pdry battery ( 9v ) , • dimensions 17 x9 x4cm, 29 digital colony counter 01 • dimensions: l 274 x b 320 x h 167 mm ( approx. ) • digital display: 3 digit, 999 max. count• magnification:x 1.7 surface magnification• power:230 v ± 10% ac, 50 hz 30 kjeldahlassembly apparatus for protein estimation• structure:corrosion resistant techno polymer• boric acid volume: 0 100 ml• distillation and titration residues removal: automatic• steam flow regulation: from 10 to 100 %• tap water consumption: 0.5 l / min at 15 °c – 1 l / min at 30 °c• led display 31 uv visible double beam spectrophotometer ( aqua properties ) • wavelength range: 190 1100 nm• display: 7 inch high touch screen display leveraging the power of microsoft• model name / number: uv visible spectrophotometer sl 218• bandwidth: 1.8 nm• detector: silicon photo diode• control: built in windows based pc control• size ( wxdxh ) in mm: 500 x 375 x 230• monochromator: concave holographic gratingwith 1200 lines / mm 32 cabinet tray dryer ( electric ) • loading capacity: minimum 12 trays• external dimension: minimum 1370 x 530x 940mm• internal dimension: minimum 840 x 430 x 840 mm• temperature range: up to 1000c• temperature accuracy: ± 10c• double walled• inside ss 304• power supply: 220 / 230 volts a.c. 50 hz with digital temp controller ( pid ) • outside m.s. powder coated • insulation in mm100°c / 200°c / 300°c: 50 / 75 / 75• tray size:minimum 812 x 406 x 31• trolley dimension: fixed racks 33 bod incubator• volume:minimum 110 liters• capacity: 4 cu.ft• external chamber: ms / ss 304 / ss 316• internal chamber: ss 304 ( optional ss 316 ) • temperature range: 2°c to 60°c• temperature uniformity: + / 0.5°c at 20°c• display: backlit led display• temperature control: microprocessor p.i.d controlleron / off compressor control pt 100 sensor 34 cod analyser• measuring range: 0 – 4000 mg / l; directly without any dilution, • pressure range: 500 to 1250 hpa , • indicator led: rgb, • ambient temperature storage: 25 to +65 °c• operation: +5 +50 °c, • cod cabinet volume: 180 l, • temp. control range: 10 °c to +40 °c with 1 °c increment, • temp. stability: ± 0.5 °c, power consumption:? 350 w with cod vial heater 35 double beam uv spectro photo meter• optics double beam, czerny turner monochromator ( grating should be 1200 lines / mm ) • measurable range 190 1100 nm • spectral bandwidth up to 2 nm • stray light = 0.05%t • photometric linear range: 0 to 4 abs • wavelength accuracy ± 0.5 nm • wavelength reproducibility: ± 0.1nm • photometric accuracy ±0.001 abs 36 bomb calorimeter• oxygen fill: automatic • water bucket fill: automatic, • bomb wash: automaticresolution: 0.1 cal / g , • temperature measuring resolution: 0.00010c.• gas requirements oxygen ( 420 450 ) psi• electrical requirements 120 / 240 v ac, 50 / 60 hz, single phase test per hour: 5 to 7 tests. % rsd: 0.05 to 0.10 %, gcv range –more than 7000 kcal / kg. 37 digital brookfield viscometer 01 • measurable minimum viscosity: 20 cp or lower and maximum upto 6, 000, 0000cps.• accuracy of measurement: ±1.0% of range. • repeatability: ± 0.5% 38 fruit processer • capacity:1000lhp• power:5750w• voltage: 220v / 380v• material: ssfrequency: 50 60 hz 39 mixer cum grinder• operating voltage: 230v 50hz• power of motor: minimum 950 w• speed ( without load ) :minimum 11000 rpm• various jars with lid and gasket for different materials• minimum 3 jars of different capacity and mechanism of grinding to be provided 40 cream separator • tank capacity:minimum 12 15 ltr• processing capacity: minimum 60 lph• machine body material: steel• material: stainless steel• bowl r.p.m: 7200• sept. temperature: 35 40° c• solid removal time: 1 hr.• dimension of machine mm: 865 x 520 x 700 41 khoa making machine• size: l1016 mm x b 686 mm x h 991 mm• motor: ½ hp ( 1 no. ) • khoa ( mawa ) making capacity min. 3 ltrs. & max 20 ltrs• dimension: 4x4x30inches...

Rural Development Department - Maharashtra

30624012 installation of biomass briquette pellet charcoal machine giving benefits to besiding grampanchyat at sahan, tal alibag dist raigad ( 2nd call ) installation of biomass briquette pellet charcoal machine giving benefits to besiding grampanchyat at sahan, tal alibag dist raigad ( 2nd call ) , part a : civil work for shade item no.1: excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distance of 50 m and lifts as below, stacking and spreading as directed by engineer in charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. ( bd a 2 / 259 ) , item no.2: providing dry trap / granite / quartzite / gneiss, rubble stone soling in 15 cm to 20 cm thicklayers including hand packing and compacting, etc. complete. ( bd a 12 / 264 ) , item no.3: providing and laying in situ cement concrete m 15 of trap / granite / quartzite / gneiss metal for foundation and bedding including bailing out water, form work, compaction, curing, etc. complete. ( cement 5.90 bags / cum ) m 15 , item no.4: providing and cutting bending, hooking, laying in position and tying hcrm / crsfor reinforcement as per detaileddrawingsforr.c.c.worknote:whereitemno34 ( c ) consideredinestimate, anticorrosive treatment shall not be considered additionaly. hcrm : high corrosion resistance marine. crs : corrosion resistance steel. , item no.5: providing and laying in situ cement concrete of trap / granite / quartzite / gneiss metal for rcc work in foundation like raft, grillage, strip foundation and footing of rcc columns and steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc. complete. ( by weigh batching and mix design for m250 and m 300 only. use of l&t, a.c.c., ambuja, birla gold, manikgad, rajashree, etc. cement is permitted. ) ( excluding m.s. or tor reinforcement ) , item no.6: filling in plinth and floors / trenches withcontractors murum for bedding in 15 cm to 20 cm layers including watering and compaction, etc. complete. ( bd a 11 / 263 ) , item no.7: providing and casting in situ cement concrete of trap / granite / quartzite / gneiss metal of approved quality for rcc works as per detailed drawings and designs or as directed by engineerincharge including normal dewatering, centering, form work, compaction, finishing the formed surfaces with cm 1:3 of sufficient minimum thickness if special finish is to be provided and curing, etc. complete. ( by weigh batching and mix design for m 250 and m 300 only. use of l&t, a.c.c., ambuja, birla gold, manikgad, rajashree, etc. cement is permitted. ) ( excluding m.s. or tor reinforcement ) m 25 for all types of columns , item no.8: providing and casting in situ c.c. of trap granite / quartzite / gneiss metal of approved quality for rcc works as per detailed drawings and designs or as directed by engineer in charge including normal dewatering, centering, form work, compaction, finishing the formed surfaces with c.m. 1:3 of sufficient minimum thickness to give a smooth and even surface wherever necessary or roughening if special finish is to be provided and curing, etc. complete. ( by weigh batching and mix design for m 250 and m 300 only. use of l&t, a.c.c., ambuja, birla gold, manikgad, rajashree, etc. cement is permitted. ) ( excluding m.s. or tor reinforcement ) for beams / braces / lintels , item no.9: providing secondclass burnt brickmasonry with conventional / i.s. type bricks in cement mortar1:6in superstructure including striking joints, raking out joints, watering andscaffolding etc. complete , item no 10 providing internal cement plaster 12mm thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc. , item no.11: providing internal cement plaster 20mm. thick in single coats in cement mortar 1:3 withoutneeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete. , item no.12.: providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates, etc. as per detailed design and drawing or as directed by engineer incharge including cutting, fabricating, hoisting, erecting and fixing in position, making riveted / bolted / welded connections and one coat of anticorrosive paint and over it two coats of oil painting, etc. complete. ( bd c 8 / 278 ) , item no.13: providingand fixing 6.00mm thick isi mark asbestos cement corrugated shee troofing including galvanised ironjorlhookbolts galvanised iron band bituminous g.i.washers, galvanised iron clamps, bolts, nuts and scaffolding etc. complete. , item no.14: providing andfixing 6mm thick isi mark asbestos cement ridge capping for roofing including galvanised iron hooks, bolts, galvanised iron and bituminous washers, galvanised iron clamps, bolts, nutsincluding scaffolding etc. complete. , item no.15: providing and applying anti peel paint of approved make & approved brand exterior emulsion paint of approved quality, colour and shade tooldand new surface in two coats, including exterior acrylic primer coat, scaffolding, preparing the surface etc. complete ( heatreflective , 1 ) for cement soundness test, initial and final setting time , part b plant and machineryitem no.1 : combo machine to produce biomass peller / briquette charcoal machine set up with loading hopper and mixer and cooling conveyer with material loading silo and conveyer system.machine should produce sizes of diameter from 8 mm to 100 mm diameter or diagonally for quadratic shape / irrespective of length, along with hydraulic power pack with plate type oil cooling and high pressure filtering system with all sub machinery with have permanent shed 50mtr x 30mtr area for operation , item no.2: in house mobile shredding / threshing machines / wood chipper , item no.3: integrated grinding system with inert separation with dust suction system and filtering and conveyer system.for input and out and silo for 4 tons loading , item no.4: integrated rotary drum system with automatic temp control with conveyer system for input and output with material handling unit , item no.5: weighbridge with software and recording digital type , item no.6: providing & errecting commissioning of single gurder electrical oprated 5.00 ton capicity crane eot crane 5 mt, 10 mt span , item no.7: front end loader & agro waste handling equipment ( min 75 hp ) with tracker , item no.8: bomb calorimeter automatic , item no.9: steam generator 16 kw , item no.10: 17 hp 175psigcompressor with 500 liters air tank having 1000 liters capicty , item no.11: moisture measurement equipments , item no.12: ash content measurement equipment with automatic detection , item no.13: computer / printer with wifi and gsm connection , item no.14: video surveillance system in factory, office and weigh bridge designing, supplying, installing testing & commissioning. , item no.15: tools, fixtures and devices for maintenance , part c: electrical work item no. 1 supplying and erecting 250 kvar, 3 phase, 50 hz., capacitor dutycontactor with de latching mechanism microprocessor apfccontroller with mpp / app type capacitor with 525 v and havingminimum overcurrent capacity of 1.8 in, peak inrush current capacity300 in and minimum life 150000 hours with , consisting of suitablesteps of mpp / app type capacitor units with detuned aluminiumfilter 7% reactors with circuit breaker as main incomer and mccb foreach branch protection, as per specification no cp ed / apfc dsr ino 6 7 22 , item no2: supplying anderectingrolledsteel joist ( girder ) pole 150x80 or 150 / 75mm. ( 14.9 kg / metre ) with base plate in provided foundation as per specification no. oh pl / rsj dsr ino 8 1 9 , item no.3: supplyinganderectingallaluminiumstranded conductors7 / 2.21mm.complete. ( gnat ) ( 73.77 kg perkm ) as per specification no. oh con / aac dsr ino 8.5.2 , item no.4: supplyinganderectingallaluminiumstranded conductors7 / 3.10mm. complete. ( ant. ) ( 145.0 kg perkm ) as per specification no. oh con / aac dsr ino 8 5 5 , item no.5: supplyinganderectingporcelainshackletypelt medium insulator 75x115 mm. dia. with g.l. strips, nuts and bolts, complete dsr ino. 8 6 2 , item no.6: supplying and erecting g.l. stay set for poles, including loop insulators atinaccessibleheightcompletewith anchorplate 300x300x6mm., straining screws, g.l.stay wire 7 / 10 swg, g.l. stay rod 20 mm x 1.8 meter length and poleclampsduly erected in providedcement concrete foundation dsr ino 8 7 1. , item no.7: supplyinganderectingpoleclamp madefrom50 x 10 mm.m.s. flat for pole or pipe, postcompleteerected with 15 mm. bolts and nuts, complete duly painted with one coatofredoxideandtwocoatsofaluminium paint dsr 8 7 11 , item no.8: supplying and erecting m.s. pole bracket, fabricate fromangleiron75x40x6mm.and 1100mm.long for 4 insulators, complete as per spec no.oh pl / bkt dsr ino. 8 4 8 , item no.9: supplying and erecting pipe type earthingwith gi pipe complete with all materials, testing & recording the results asper spe no. ea epdsr ino.9 1 4 , item no. 10: supplying & erecting end pole d. p. structure for 11 / 0.415 kv, 200 kva transformer with r.s.j. pole 2 nos. of size 100mm x 116mm x 11 m long with suitable distribution box of c.r.c.a. sheet 16swg with 4 pole mccb 300 amps as incomer & 6 nos.100 amps kitkat / mccb for outgoing circuits. transformer d.p. structureincludes the a. b. switch 200 amps, d.o. fuse set & l.a. set. 2 nos.top channel of size 100 mmx 50 mm for erection of a.b. switch &2 nos. base channel of size 100 mm x 50 x mm for erectingtransformer. channel of size 75 x40 mm for erecting d.o. fuse set, l.a., a.b. switch handle etc. angle of size 50 x 50 x6 mm for erectingdistribution box, transformer belt etc. as per drawing ( min. 124 kg.iron work ) with necessary clamps, nut bolts, vee cross arm, top clip, insulators etc. complete with caution board & barbed wire. d.p.structure shall be erected in c.c. foundatin complete dsr ino 8 4 26 , item no.11: supplying, installing, testing & commissioning watts 3 phase, 22 / 0.433 kv, 50 hz., 500 kva, oil immersed and naturallycooled outdoor type, copper wound transformer, delta / starconnected with additional neutral brought out on load sidetemperature rise should not exceed 40oc by thermometer in oil and 45oc by the resistance in winding at full load rating, with hv tapping ( with off load tap changer ) off load +5 to 10 in steps of 2.5%, withstandard accessories complete with test certificate with losses below 1586 watts at 50% load, 4515 watts at 100% load as per is:1180 2014 energy efficiency level ii with necessary permissions of electrical inspector, as per specification no ss trdsrino. 10 1 16 , item no.12: supplying, erecting, testing, commissioning 11 kv ht meteringcubical ( compact type ) approved by msedcl / licenseefabricated with 2 mm ( 14 swg ) m.s. sheets with supporting angleand channel, painted with powder coating / epoxy paint of requiredshade copper bus bar size 25x6 mm electronic security lock and heavyduty mechanical lock, with counter meter for measuring no of timesthe opening of doors, top side cover ( ct, pt cover ) interlock withmeter doors, epoxy coated 3 nos ct having required ratio between75 / 5 a to 100 / 5 a, va10, class0.2s, 11000 / v3 / 110 / v3 va 50, class0.2 epoxy terminal block suitable for provided trivector meter, and provision for incoming and outgoing cables etc. complete dulytested by licensee with necessary test certificates and erected onprovided plinth / cc foundationdsr ino. 1 9 27 , item no.13: supplying, erecting & terminating xlpe armoured cable 2 core 10sq. mm. aluminium conductor with continuous 5.48 sq. mm. ( 12swg ) g.i. earth wire complete erected with glands & lugs, on wall / trusses / pole or laid in provided trench / pipe as per specification no.cb lt / al dsr ino. 7 1 6 , item no.14: supplying, erecting & terminating xlpe armoured cable 3½ core25 sq. mm. aluminium conductor with continuous 5.48 sq. mm. ( 12 swg ) g.i. earth wire complete erected with glands & lugs, onwall / trusses / pole or laid in provided trench / pipe as per specification no. cb lt / aldsr ino. 7 1 15 , item no.15: supplying, erecting & terminating xlpe armoured cable 3½ core 50sq. mm. aluminium conductor with continuous 5.48 sq. mm. ( 12 swg ) g.i. earth wire complete erected with glands & lugs, onwall / trusses / pole or laid in provided trench / pipe as per specification no. cb lt / aldsr ino. 7 1 17 , item no.16: supplying, erecting & terminating xlpe armoured cable 3½ core 95 sq. mm. aluminium conductor with continuous 8.35 sq. mm. ( 10 swg ) g.i. earth wire complete erected with glands & lugs, onwall / trusses / pole or laid in provided trench / pipe as per specification no. cb lt / aldsr ino. 7 1 19 , item no.17: supplying, erecting & terminating xlpe armoured cable 3½ core 150 sq. mm. aluminium conductor with continuous 12.97 sq. mm. ( 8 swg ) g.i. earth wire complete erected with glands & lugs, onwall / trusses / pole or laid in provided trench / pipe as per specification no. cb lt / aldsr ino. 7 1 21 , item no.18: supplying, erecting & terminating xlpe armoured cable 3½ core 300sq. mm. aluminium conductor with continuous 12.97 sq. mm. ( 8 swg ) g.i. earth wire complete erected with glands & lugs, onwall / trusses / pole or laid in provided trench / pipe as per specification no. cb lt / aldsr ino. 7 1 24 , item no.19: making trench in softsoil of suitable width and depth for laying provided l.t cable up to 10 sq.mm.complete.as per specification no. cw exn ctr dsr 16 1 1 , item no.20: excavating soft murum / soft soil road by chiselling for preparingpit for poles stay or earth plates or for laying cables, pipes & clearing the site by removing debris & making the site good complete dsr 16 1 7 , item no.21: providing & erecting 6 m high ( clear height ) galvanised octagonal pole with foundation bolts having bottom of 130 mm a / f, top 70 mm a / f on provided foundation as per spe ohpl / opl dsr ino 8 3 13 , item no.22: making m 20 grade reinforced cement concrete foundation byconsidering the safe soil bearing capacity at site as 10 t / sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete ( for 6m to 8m high octagonal / conical gi pole ) . dsr ino 16 3 9 , item no.23: providing and erecting galvanised 1000mm single arm sword typebracket with frp dome and ball as per specification no. ohpl / pbkt dsr ino.8 3 30 , item no.24: supplying anderecting aproved type led street light 75 90watt having pf>0.95 class ip 65 or above housing pressure diacast alluminium alloy and heat sink extruted alluminiumas per specification no.fg odf / fls2dsr ino. 2 5 7 , item no.25: supplying & erecting mains with 2x1.5 sq.mmf.r. stranded / solid copper pvc insulated wire laid in provided conduit / trunking / inside pole / bus bars or any otherplaces .wg ma / bw dsr ino 1 3 1 , item no.26: supply and erecting 9m ( clear height ) fixedtype high mast ( top 100mm, bottom 200mm ) with hexagonal / round bracket and foundationbolts suitable for max. 4nos floodlight fixtureson provided foundation as per specino. oh pl / opl ( excluding luminaries ) . dsr ino 8 3 8 , item no.26: making m 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 t / sq.m at 1.5 m depth including supply of steel, concrete, excavation and xingprovided nut bolts with the help of template, duly plastered as perdesign complete ( for 9m & 10m high octagonal / conical gi pole ) .. dsr ino 16 3 10 , item no.27: supplying and erecting led flood light fitting of 150 w, including lamp, with pf > 0.95, class ip 65 and above housing of pressuredie cast alluminium alloy and heat sink extrudedalluminium complete per specification no fgodf / fls dsr ino2 5 10 , item no.28: supplying & erecting conventional spike type air termination suitable to carry lighting stroke made up of heavy gauge 40 mm dia copper pipe of standard length with 5 nos copper spike fixed on copper ball as air terminal duily threaded in copper pipe erected on provided foundationdsr ino 9 3 1 , item no.29: supplying and erecting aluminium strip of required sizes usedfor earthing on wall and / or any other purpose with necessaryaluminium clamps fixed on wall painted with bituminous paint in anapproved manner with joints required. as per specification no eaep. dsr ino 9 2 6 , item no.30: providing earthing with copper earth plate size 30x30x0315cm complete with all materials, testing & recording the results asper specification no. ea epdsr ino.9 1 1 , item no.31: supplying and fixing pvc synthetic elastomer electricallyinsulating mat with class b insulation conforming to is: 15652 –2006 & cpri tested having 2.5 mm thickness upto 11 kvdsr ino. 10 2 29 , item no.32: providing pair of duly tested rubber hand gloves as per is:47705 suitable for working upto 22 kv supply completedsr ino 10 2 23 , item no.33: supplying & erecting on line ups pure sine wave of 5 kva capacity complete with standard features, along withnecessary smf batteries for 30 mins battery backup, as per speno. ap ups dsr ino 3 7 4 , item no.34: supplying, installing, testing and commissioning of 2500va digital pure sine wave inverter based on insulatedgate bipolar transistor ( igbt ) technology single phase230v, 50 hz complete as per specification no. ap inv ( without batteries ) dsr ino 5 6 4 , item no.35: supplying and erecting 12 v / 150ah tubular battery withbattery terminal wire, duly charged complete with 36months warranty completedsr ino 5 8 4 , item no.36: supplying and erecting d.c.p. type fire extinguisher 6 kg capacity cartridge type with gun metal cap 150 gram co2 gas cartridge, powder and brackets conforming to is 2171 1985 / is 15683 and complete erected with necessary clamps made from 50x6 mm m.s. flat with nuts & bolts grouted in wall complete.dsr ino 10 2 32 , item no.38: supplying & erecting carbon dioxide ( co2 ) fire extinguisher of 4.5 kg. capacity cartridge type conform to is 2878 / 15683 complete erected with necessary clamp made from 50 x 6 mm. m. s. flat with nut & bolts grouted in wall complete.dsr ino 10 2 34 , gst charges 12%...

Rural Development Department - Maharashtra

30483894 installation of biomass briquette pellet charcoal machine giving benefits to besiding grampanchyat at sahan, tal alibag dist raigad installation of biomass briquette pellet charcoal machine giving benefits to besiding grampanchyat at sahan, tal alibag dist raigad , part a : civil work for shade item no.1: excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distance of 50 m and lifts as below, stacking and spreading as directed by engineer in charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (bd a 2/259) , item no.2: providing dry trap/ granite/ quartzite/ gneiss,rubble stone soling in 15 cm to 20 cm thicklayers including hand packing and compacting, etc. complete. (bd a 12/264) , item no.3: providing and laying in situ cement concrete m 15 of trap/ granite / quartzite / gneiss metal for foundation and bedding including bailing out water, form work, compaction, curing, etc. complete. (cement 5.90 bags / cum) m 15 , item no.4: providing and cutting bending, hooking, laying in position and tying hcrm/ crsfor reinforcement as per detaileddrawingsforr.c.c.worknote:whereitemno34(c)consideredinestimate, anticorrosive treatment shall not be considered additionaly. hcrm : high corrosion resistance marine. crs : corrosion resistance steel. , item no.5: providing and laying in situ cement concrete of trap/ granite / quartzite / gneiss metal for rcc work in foundation like raft, grillage, strip foundation and footing of rcc columns and steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc. complete. (by weigh batching and mix design for m250 and m 300 only. use of l&t, a.c.c., ambuja, birla gold, manikgad, rajashree, etc. cement is permitted.) (excluding m.s. or tor reinforcement) , item no.6: filling in plinth and floors / trenches withcontractors murum for bedding in 15 cm to 20 cm layers including watering and compaction, etc. complete. (bd a 11/263) , item no.7: providing and casting in situ cement concrete of trap/ granite / quartzite / gneiss metal of approved quality for rcc works as per detailed drawings and designs or as directed by engineerincharge including normal dewatering, centering, form work, compaction, finishing the formed surfaces with cm 1:3 of sufficient minimum thickness if special finish is to be provided and curing, etc. complete. (by weigh batching and mix design for m 250 and m 300 only. use of l&t, a.c.c., ambuja, birla gold, manikgad, rajashree, etc. cement is permitted.) (excluding m.s. or tor reinforcement)m 25 for all types of columns , item no.8: providing and casting in situ c.c. of trap granite/ quartzite / gneiss metal of approved quality for rcc works as per detailed drawings and designs or as directed by engineer in charge including normal dewatering, centering, form work, compaction, finishing the formed surfaces with c.m. 1:3 of sufficient minimum thickness to give a smooth and even surface wherever necessary or roughening if special finish is to be provided and curing, etc. complete. (by weigh batching and mix design for m 250 and m 300 only. use of l&t, a.c.c., ambuja, birla gold, manikgad, rajashree, etc. cement is permitted.) (excluding m.s. or tor reinforcement) for beams / braces / lintels , item no.9: providing secondclass burnt brickmasonry with conventional/i.s. type bricks in cement mortar1:6in superstructure including striking joints, raking out joints, watering andscaffolding etc. complete , item no 10 providing internal cement plaster 12mm thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc. , item no.11: providing internal cement plaster 20mm. thick in single coats in cement mortar 1:3 withoutneeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete. , item no.12.: providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates, etc. as per detailed design and drawing or as directed by engineer incharge including cutting, fabricating, hoisting, erecting and fixing in position, making riveted / bolted / welded connections and one coat of anticorrosive paint and over it two coats of oil painting, etc. complete. (bd c 8/278) , item no.13: providingand fixing 6.00mm thick isi mark asbestos cement corrugated shee troofing including galvanised ironjorlhookbolts galvanised iron band bituminous g.i.washers,galvanised iron clamps,bolts, nuts and scaffolding etc. complete. , item no.14: providing andfixing 6mm thick isi mark asbestos cement ridge capping for roofing including galvanised iron hooks,bolts,galvanised iron and bituminous washers,galvanised iron clamps,bolts,nutsincluding scaffolding etc. complete. , item no.15: providing and applying anti peel paint of approved make & approved brand exterior emulsion paint of approved quality, colour and shade tooldand new surface in two coats,including exterior acrylic primer coat, scaffolding, preparing the surface etc. complete (heatreflective , 1) for cement soundness test, initial and final setting time , part b plant and machineryitem no.1 : combo machine to produce biomass peller / briquette charcoal machine set up with loading hopper and mixer and cooling conveyer with material loading silo and conveyer system.machine should produce sizes of diameter from 8 mm to 100 mm diameter or diagonally for quadratic shape / irrespective of length, along with hydraulic power pack with plate type oil cooling and high pressure filtering system with all sub machinery with have permanent shed 50mtr x 30mtr area for operation , item no.2: in house mobile shredding / threshing machines / wood chipper , item no.3: integrated grinding system with inert separation with dust suction system and filtering and conveyer system.for input and out and silo for 4 tons loading , item no.4: integrated rotary drum system with automatic temp control with conveyer system for input and output with material handling unit , item no.5: weighbridge with software and recording digital type , item no.6: providing & errecting commissioning of single gurder electrical oprated 5.00 ton capicity crane eot crane 5 mt, 10 mt span , item no.7: front end loader & agro waste handling equipment ( min 75 hp) with tracker , item no.8: bomb calorimeter automatic , item no.9: steam generator 16 kw , item no.10: 17 hp 175psigcompressor with 500 liters air tank having 1000 liters capicty , item no.11: moisture measurement equipments , item no.12: ash content measurement equipment with automatic detection , item no.13: computer / printer with wifi and gsm connection , item no.14: video surveillance system in factory, office and weigh bridge designing, supplying, installing testing & commissioning. , item no.15: tools, fixtures and devices for maintenance , part c: electrical work item no. 1 supplying and erecting 250 kvar, 3 phase, 50 hz., capacitor dutycontactor with de latching mechanism microprocessor apfccontroller with mpp / app type capacitor with 525 v and havingminimum overcurrent capacity of 1.8 in, peak inrush current capacity300 in and minimum life 150000 hours with , consisting of suitablesteps of mpp / app type capacitor units with detuned aluminiumfilter 7% reactors with circuit breaker as main incomer and mccb foreach branch protection, as per specification no cp ed/apfc dsr ino 6 7 22 , item no2: supplying anderectingrolledsteel joist(girder)pole 150x80 or 150/75mm. (14.9 kg/metre) with base plate in provided foundation as per specification no. oh pl/rsj dsr ino 8 1 9 , item no.3: supplyinganderectingallaluminiumstranded conductors7/2.21mm.complete.(gnat) (73.77 kg perkm) as per specification no. oh con/aac dsr ino 8.5.2 , item no.4: supplyinganderectingallaluminiumstranded conductors7/3.10mm. complete. (ant.) (145.0 kg perkm )as per specification no. oh con/aac dsr ino 8 5 5 , item no.5: supplyinganderectingporcelainshackletypelt medium insulator 75x115 mm. dia. with g.l. strips, nuts and bolts, complete dsr ino. 8 6 2 , item no.6: supplying and erecting g.l. stay set for poles, including loop insulators atinaccessibleheightcompletewith anchorplate 300x300x6mm.,straining screws, g.l.stay wire 7/10 swg, g.l. stay rod 20 mm x 1.8 meter length and poleclampsduly erected in providedcement concrete foundation dsr ino 8 7 1. , item no.7: supplyinganderectingpoleclamp madefrom50 x 10 mm.m.s. flat for pole or pipe, postcompleteerected with 15 mm. bolts and nuts, complete duly painted with one coatofredoxideandtwocoatsofaluminium paint dsr 8 7 11 , item no.8: supplying and erecting m.s. pole bracket,fabricate fromangleiron75x40x6mm.and 1100mm.long for 4 insulators, complete as per spec no.oh pl/bkt dsr ino. 8 4 8 , item no.9: supplying and erecting pipe type earthingwith gi pipe complete with all materials, testing & recording the results asper spe no. ea epdsr ino.9 1 4 , item no. 10: supplying & erecting end pole d. p. structure for 11/0.415 kv,200 kva transformer with r.s.j. pole 2 nos. of size 100mm x 116mm x 11 m long with suitable distribution box of c.r.c.a. sheet 16swg with 4 pole mccb 300 amps as incomer & 6 nos.100 amps kitkat/ mccb for outgoing circuits. transformer d.p. structureincludes the a. b. switch 200 amps, d.o. fuse set & l.a. set. 2 nos.top channel of size 100 mmx 50 mm for erection of a.b. switch &2 nos. base channel of size 100 mm x 50 x mm for erectingtransformer. channel of size 75 x40 mm for erecting d.o. fuse set,l.a., a.b. switch handle etc. angle of size 50 x 50 x6 mm for erectingdistribution box, transformer belt etc. as per drawing (min. 124 kg.iron work ) with necessary clamps, nut bolts, vee cross arm, top clip,insulators etc. complete with caution board & barbed wire. d.p.structure shall be erected in c.c. foundatin complete dsr ino 8 4 26 , item no.11: supplying, installing, testing & commissioning watts 3 phase,22/0.433 kv, 50 hz., 500 kva, oil immersed and naturallycooled outdoor type, copper wound transformer, delta/starconnected with additional neutral brought out on load sidetemperature rise should not exceed 40oc by thermometer in oil and 45oc by the resistance in winding at full load rating, with hv tapping(with off load tap changer) off load +5 to 10 in steps of 2.5%, withstandard accessories complete with test certificate with losses below 1586 watts at 50% load, 4515 watts at 100% load as per is:1180 2014 energy efficiency level ii with necessary permissions of electrical inspector, as per specification no ss trdsrino. 10 1 16 , item no.12: supplying, erecting, testing, commissioning 11 kv ht meteringcubical (compact type) approved by msedcl/licenseefabricated with 2 mm (14 swg) m.s. sheets with supporting angleand channel, painted with powder coating / epoxy paint of requiredshade copper bus bar size 25x6 mm electronic security lock and heavyduty mechanical lock, with counter meter for measuring no of timesthe opening of doors, top side cover (ct,pt cover) interlock withmeter doors, epoxy coated 3 nos ct having required ratio between75/5 a to 100/5 a, va10,class0.2s, 11000/v3/110/v3 va 50, class0.2 epoxy terminal block suitable for provided trivector meter,and provision for incoming and outgoing cables etc. complete dulytested by licensee with necessary test certificates and erected onprovided plinth/ cc foundationdsr ino. 1 9 27 , item no.13: supplying, erecting & terminating xlpe armoured cable 2 core 10sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12swg) g.i. earth wire complete erected with glands & lugs, on wall/trusses/pole or laid in provided trench/ pipe as per specification no.cb lt/al dsr ino. 7 1 6 , item no.14: supplying, erecting & terminating xlpe armoured cable 3½ core25 sq. mm. aluminium conductor with continuous 5.48 sq. mm.(12 swg) g.i. earth wire complete erected with glands & lugs, onwall/ trusses/pole or laid in provided trench/ pipe as per specification no. cb lt/aldsr ino. 7 1 15 , item no.15: supplying, erecting & terminating xlpe armoured cable 3½ core 50sq. mm. aluminium conductor with continuous 5.48 sq. mm.(12 swg) g.i. earth wire complete erected with glands & lugs, onwall/ trusses/pole or laid in provided trench/ pipe as per specification no. cb lt/aldsr ino. 7 1 17 , item no.16: supplying, erecting & terminating xlpe armoured cable 3½ core 95 sq. mm. aluminium conductor with continuous 8.35 sq. mm.(10 swg) g.i. earth wire complete erected with glands & lugs, onwall/ trusses/pole or laid in provided trench/ pipe as per specification no. cb lt/aldsr ino. 7 1 19 , item no.17: supplying, erecting & terminating xlpe armoured cable 3½ core 150 sq. mm. aluminium conductor with continuous 12.97 sq. mm.(8 swg) g.i. earth wire complete erected with glands & lugs, onwall/ trusses/pole or laid in provided trench/ pipe as per specification no. cb lt/aldsr ino. 7 1 21 , item no.18: supplying, erecting & terminating xlpe armoured cable 3½ core 300sq. mm. aluminium conductor with continuous 12.97 sq. mm.(8 swg) g.i. earth wire complete erected with glands & lugs, onwall/ trusses/pole or laid in provided trench/ pipe as per specification no. cb lt/aldsr ino. 7 1 24 , item no.19: making trench in softsoil of suitable width and depth for laying provided l.t cable up to 10 sq.mm.complete.as per specification no. cw exn ctr dsr 16 1 1 , item no.20: excavating soft murum / soft soil road by chiselling for preparingpit for poles stay or earth plates or for laying cables, pipes & clearing the site by removing debris & making the site good complete dsr 16 1 7 , item no.21: providing & erecting 6 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm a/f, top 70 mm a/f on provided foundation as per spe ohpl / opl dsr ino 8 3 13 , item no.22: making m 20 grade reinforced cement concrete foundation byconsidering the safe soil bearing capacity at site as 10 t/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal /conical gi pole). dsr ino 16 3 9 , item no.23: providing and erecting galvanised 1000mm single arm sword typebracket with frp dome and ball as per specification no. ohpl/pbkt dsr ino.8 3 30 , item no.24: supplying anderecting aproved type led street light 75 90watt having pf>0.95 class ip 65 or above housing pressure diacast alluminium alloy and heat sink extruted alluminiumas per specification no.fg odf/fls2dsr ino. 2 5 7 , item no.25: supplying & erecting mains with 2x1.5 sq.mmf.r. stranded/solid copper pvc insulated wire laid in provided conduit/trunking /inside pole/bus bars or any otherplaces .wg ma/ bw dsr ino 1 3 1 , item no.26: supply and erecting 9m (clear height) fixedtype high mast (top 100mm, bottom 200mm)with hexagonal/round bracket and foundationbolts suitable for max. 4nos floodlight fixtureson provided foundation as per specino. oh pl/ opl (excluding luminaries). dsr ino 8 3 8 , item no.26: making m 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 t/sq.m at 1.5 m depth including supply of steel, concrete, excavation and xingprovided nut bolts with the help of template, duly plastered as perdesign complete (for 9m & 10m high octagonal /conical gi pole).. dsr ino 16 3 10 , item no.27: supplying and erecting led flood light fitting of 150 w, including lamp, with pf > 0.95,class ip 65 and above housing of pressuredie cast alluminium alloy and heat sink extrudedalluminium complete per specification no fgodf/fls dsr ino2 5 10 , item no.28: supplying & erecting conventional spike type air termination suitable to carry lighting stroke made up of heavy gauge 40 mm dia copper pipe of standard length with 5 nos copper spike fixed on copper ball as air terminal duily threaded in copper pipe erected on provided foundationdsr ino 9 3 1 , item no.29: supplying and erecting aluminium strip of required sizes usedfor earthing on wall and/or any other purpose with necessaryaluminium clamps fixed on wall painted with bituminous paint in anapproved manner with joints required. as per specification no eaep. dsr ino 9 2 6 , item no.30: providing earthing with copper earth plate size 30x30x0315cm complete with all materials, testing & recording the results asper specification no. ea epdsr ino.9 1 1 , item no.31: supplying and fixing pvc synthetic elastomer electricallyinsulating mat with class b insulation conforming to is: 15652 –2006 & cpri tested having 2.5 mm thickness upto 11 kvdsr ino. 10 2 29 , item no.32: providing pair of duly tested rubber hand gloves as per is:47705 suitable for working upto 22 kv supply completedsr ino 10 2 23 , item no.33: supplying & erecting on line ups pure sine wave of 5 kva capacity complete with standard features, along withnecessary smf batteries for 30 mins battery backup, as per speno. ap ups dsr ino 3 7 4 , item no.34: supplying, installing, testing and commissioning of 2500va digital pure sine wave inverter based on insulatedgate bipolar transistor (igbt) technology single phase230v,50 hz complete as per specification no. ap inv (without batteries) dsr ino 5 6 4 , item no.35: supplying and erecting 12 v/150ah tubular battery withbattery terminal wire, duly charged complete with 36months warranty completedsr ino 5 8 4 , item no.36: supplying and erecting d.c.p. type fire extinguisher 6 kg capacity cartridge type with gun metal cap 150 gram co2 gas cartridge, powder and brackets conforming to is 2171 1985/ is 15683 and complete erected with necessary clamps made from 50x6 mm m.s. flat with nuts & bolts grouted in wall complete.dsr ino 10 2 32 , item no.38: supplying & erecting carbon dioxide (co2) fire extinguisher of 4.5 kg. capacity cartridge type conform to is 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. m. s. flat with nut & bolts grouted in wall complete.dsr ino 10 2 34 , gst charges 12%...

Mineral Exploration Corporation Limited - Maharashtra

29406833 calibration of equipment at chemical laboratory hot air oven, analytical weighing balance, digital humidity cabinet, advance make automatic proximate analyzer ( coal ) , muffel furnace, digital thermo hygrometer, digital temperature indicator, cag regulator ( pg ovygen cylinder ) , gas regulator ( pg nitorgen cylinder ) , pressure gauge ( bomb calorimeter ) , pipetee, burette, steel scale, glass thermometer, weight box, 72 mesh – sieve, 200 mesh – sieve, volumetric flask, measuring cylinder...

Ministry Of Finance - Maharashtra

29212483 bids are invited for bomb calorimeter 1 , cmc_bomb calorimeter_1 , bomb calorimeter 2 , cmc_bomb calorimeter 2 , bomb calorimeter 3 , cmc bomb calorimeter 3 , bomb calorimeter 4 , cmc bomb calorimeter 4 , bomb calorimeter 5 , cmc_bomb calorimeter 5 , bomb calorimeter 6 , cmc bomb calorimeter 6 total quantity : 1...

Ministry Of Finance - Maharashtra

29180979 bids are invited for bomb calorimeter 1 , cmc bomb calorimeter 1 , bomb calorimeter 2 , cmc bomb calorimeter 2 , bomb calorimeter 3 , cmc_bomb calorimeter 3 , bomb calorimeter 4 , cmc bomb calorimeter 4 , bomb calorimeter 5 , cmc bomb calorimeter 5 , bomb calorimeter 6 , cmc bomb calorimeter_6 total quantity : 1...