Department Of Atomic Energy - Maharashtra
31677669 bids are invited for ferrite meter (q3)mse total quantity : 1...
31677669 bids are invited for ferrite meter (q3)mse total quantity : 1...
30226250 annual rate contract for preparation of test specimens, testing, analysis and submission of reports of metallic / non metallic samples to be received from hwb cost estimation sheet rates valid for 2 years a mechanical testing (charges inclusive of normal machining charges). bidders must confirm that raw test data, as the testing progresses, are generated by the machine itself, which has built in servo mechanisms, so that such output in excel sheet is available, automatically). a 1 tensile test with stress & strain diagram (with extensometer) a 1.1 test to be conducted at room temperature 30 a 1.2 test to be conducted at elevated temperature (upto 300oc ) 10 a 1.3 test to be conducted at elevated temperature > 300oc & upto 700o c 10 a 2 bend/flattening/flaring test 1 a 3 hardness determination test (3 indentation) 25 a 4 micro hardness test (3 indentation) 25 a 5 impact test upto ( ) 60oc (set of 3 specimens) 10 b chemical analysis b 1 wet analysis: b 1.1 first element (ferrous) 5 b 1.2 first element (non ferrous) 5 b 1.3 each additional element (other than boron or nitrogen) 40 b 1.4 each additional element (if it is either boron or nitrogen) 5 b 2 spectro analysis: complete analysis (upto eight elements) b 2.1 in ferrous material of any composition 10 b 2.2 in non ferrous material of any composition 10 c metallography examination: c 1 macro examination per specimen per location (as per astm e 318) 5 c 2 micro examination with 3 copies of photographs at one magnification 20 c 3 grain size determination as per astm e 112 1 c 4 inclusion rating determination as per astm e 45 method a 1 c 5 ferrite check as per astm e 562 (metallography / area fraction) 1 c 6 ferrite check using ferrite meter (magnetic instruments) 1 c 7 replica examination at lab c 7.1 with optical microscope (per replica) 1 cost estimation sheet rates valid for 2 years c 7.2 sem (per replica) or per sample of fractured surface 1 c 8 in situ metallography work to be carried out at in & around mumbai (rate per visit or minimum 8 replica) with optical microscope 1 c 8.1 rate for additional replica (in situ metallography work) (over and above 8 locations) to be carried out at in & around mumbai 1 d corrosion tests d 1 as per astm a 262 d 1.1 practice ‘a’ (with photographs) 1 d 1.2 practice ‘c’(5 cycles of 48 hrs each) 1 d 1.3 practice ‘c’(per 48 hrs. cycle) 1 d 1.4 practice ‘e’ (72 hrs test) 1 d 2 stress corrosion cracking test as per astm g 36 (upto 100 hrs.) 1 d 3 pitting & crevice corrosion tests as per astm 46 & g 48 1 d 4 weld decay test as per astm a 249 1 d 5 sulphide stress corrosion cracking test (sscc) as per nace tm 0177 1 d 6 hic testing as per nace tm 0284(set of three specimens) 1 e miscellaneous tests: e 1 dye penetrant test (per sq. feet) 1 e 2 ultrasonic examination test (in situ check per visits) 1 e 3 solution annealing, stress relieving, normalizing of test coupon ( up to 2 hrs soaking period) e 3.1 solution annealing upto 1160o c 1 e 3.2 stress relieving 1 e 3.3 normalizing 1 e 3.4 gas analysis hydrogen analysis in metals and alloys. 1 f sample preparation for mechanical test f 1 tensile test f 1 1 carbon steel, stainless steel, alloys of pb, cu, al etc. (softer material) f 1 1.1 specimen thickness upto 20 mm 10 cost estimation sheet rates valid for 2 years f 1 1.2 specimen thickness > 20 mm but upto 50 mm 2 f 1 2 new and service exposed inconel 625, inconel 600, incoloy 800 h (with threaded portion) (may be harder material) specimen thickness upto 20 mm 5 f 2 sample preparation for impact test f 2 1 carbon steel, stainless steel, alloys of pb, cu, al etc. ( softer material) 1 f 2 2 new and service exposed inconel 625 (with threaded portion)( harder material) 1 f 3 sample preparation for fracture toughness (ct specimens) of either carbon steel, stainless steel or incoloy 1 f 4 edm machining charge per specimen 5 g fracture toughness test g 1 fracture toughness testing ( kic testing) with sample preparation 1 g 2 fracture toughness testing (ctod test) with sample preparation 1 ...
30203805 bids are invited for ferrite meter (q3) () total quantity : 2...
29045350 bids are invited for ferrite meter total quantity : 1...
21133542 ad 63377 for supply of ferrite meter=> open tender...
20920384 ad 63377 for supply of ferrite meter=> open tender...
19819928 pre despatch inspection, supply and warranty of handheld type ferrite meter....
17444904 supply of ferrite meter with accessories...
7971168 supply of ferrite meter...
7834697 supply of ferrite meter...
7636312 as per nit, supply of ferrite meter...