jack Tenders in Maharashtra

1

Department Of Transport - Maharashtra

39958048 eauction for condemned buses, car,jeep and spare parts at haryana roadways palwal cond bus hr38s 0501,cond bus hr38s 0502,cond bus hr38s 0503,cond bus hr38s 0504,cond bus hr38s 1200,cond bus hr38s 1201,cond bus hr38s 1202,cond bus hr38s 1203,cond bus hr38s 1205,cond bus hr38s 1206,cond bus hr38s 1207,cond bus hr38s 1208,cond bus hr38s 1209,cond bus hr38s 2108,cond bus hr38s 2109,cond bus hr38s 2110,cond bus hr38s 2111,cond bus hr38s 2112,cond bus hr38s 2118,cond bus hr38s 2119,cond bus hr38s 2120,cond bus hr38s 2121,cond jeep hr23c 0093,cond car hr16d 0021,cond tube,cond flaph,cond break drum,cond radiator without core,cond preassure jack,cond clutch plate,cond preassure plate,cond motor parts,cond spring leaf,cond iron scrap mix,cond all kind bearing,cond alluminium scrap,cond altinature rooter,cond old rim,cond all type rubber parts mix,cond all kind of tools,cond tyre(car),cond tyre (7.50x16)...

Due Date : October 11, 2023

Tender Value : ₹ Ref. Documents

2

Central Railway - Maharashtra

39922453 supply of a) rehabilitation of br. no.128/3 at km.128/980 129/0 in lonavla yard with rcc box of size 4m *2 m by box pushing pushing method. b)(a) rehabilitation of bridge no.79/3, 81/1, 88/1, 88/3 by 1200 mm dia. rcc np 4 pipe pushing by manual jack method. (b) rehabilitation of br. no.80/4, 87/2, 88/4 by 1.5m*0.9m box pushing & br. no.87/1, 88/2 by 1.5m*1.2m box pushing under aden(t)kyn. c) rehabilitation of bridge no.. 69/3, 67/7,79/2,84/1,86/2,86/4 & 86/5 (7nos.) by box pushing. d) kalyan karjat : rehabilitation of bridge no. 65/1, 79/1 by rcc np 4 pipe pushing by manual jack method .a) rehabilitation of br. no.128/3 at km.128/980 129/0 in lonavla yard with rcc box of size 4m *2 m by box pushing pushing method. b)(a) rehabilitation of bridge no.79/3, 81/1, 88/1, 88/3 by 1200 mm dia. rcc np 4 pipe pushing by manual jack method. (b) rehabilitation of br. no.80/4, 87/2, 88/4 by 1.5m*0.9m box pushing & br. no.87/1, 88/2 by 1.5m*1.2m box pushing under aden(t)kyn. c) rehabilitation of bridge no.. 69/3, 67/7,79/2,84/1,86/2,86/4 & 86/5 (7nos.) by box pushing. d) kalyan karjat : rehabilitation of bridge no. 65/1, 79/1 by rcc np 4 pipe pushing by manual jack method .,...

Due Date : October 31, 2023

Tender Value : ₹ 9.85 Crore

3

Maharashtra Industrial Development Corporation - Maharashtra

39910100 tender for name of work : jamner industrial area...jamner industrial area.... providing, erecting, testing and commissioning of pumping machinery & power supply arrangement for raw water at jack well at khadgaon and pure water at wtp jamner industrial area....

Due Date : October 17, 2023

Tender Value : ₹ 5.10 Crore

4

Directorate Of Municipal Administration - Maharashtra

39897721 yearly tender ( 2023 24 ) for repairs of c.i. / di / gi / hdpe pipe line for vadgaon nagarpanchayat at vadgaon maval. 1 item no.1 supply of c. i. mechanical compression flanged / socket tailpiece ( popularly known as i tm flanged / socket tail piece ) suitable for making flanged connection with the plain barrel of c. i. spun pipes ( as per is 1536 / 2001 ) and d. i. pipes ( as per is: 8329 / 2000 ) .the tailpiec to be supplied complete with sealing rubber gasket of s.b.r, c.i. follower glands and m.s. nut bolts.the whole assembly should be mechanically and hydraulically tested to the provisions as laid down in is:1538 / 1993. the rates are inclusive of cost of material, freight charges, loading, transportation and unloading at departemental store, excluding gst levied by gol and gom in all respect, etc. complete as directed.. 2 i ) 80mm 3 ii ) 100mm 4 iv ) 150mm 5 v ) 200 mm 6 item no.2 supply of c.i. mechanical compression collar coupling suitable for c. i. spun pipes ( as per is 1536 / 2001 ) and complete with sealing rubber gasket of sbr, .c.i. follower glands and m.s. nut bolts.the whole assembly should be mechanically and hydraulically tested to the provisions as laid down in is:1538 / 1993. 7 i ) 80mm 8 ii ) 100mm 9 iv ) 150mm 10 v ) 200 mm 11 item no.3 supply of ci mechanical joint all socket tees as dimensionally described in table 18 of is 13382 / 1992 complete with sealing rubber gasket of s.b.r. ( dimensionally described in is 12820 / 1989 ) with cast iron follower gland and mild steel nut bolts coated or otherwise protected from rusting and suitable for c. i. pipes 12 80x80x80 13 100x100x100 14 150x150x150 15 200x200x200 16 item no.4 supply of c. i. mechanical joint double socket 90 ( 11 / 4’’ ) bends as dimensionally described in table 14 of is 13382 / 1992 complete with sealing rubber gasket of sbr ( dimensionally described in is 12820 / 1989 ) with cast iron follower gland and mild steel nut bolts coated or otherwise protected from rusting and suitable for c. i. pipes. 17 i ) 80mm 18 ii ) 100mm 19 iv ) 150mm 20 v ) 200 mm 21 item no.5 providing double flanges sluice valve conforming to is 2906 / 14846 including work gear arrangments as per test pressure, stainless steel, spindle, caps, including all taxes, transportation etc. completea ) sluice valves pn 1 ( without by pass ) 22 50 mm 23 65 mm 24 80 mm 25 100 mm 26 150 mm 27 200 mm 28 item no.6 lowering, laying and jointing in position following c.i.d / f reflex valves, butterfly valves and sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc.complete. ( rate for all class of valves. ) 29 50 mm 30 65 mm 31 80 mm 32 100 mm 33 150 mm 34 200 mm 35 item no. 7 providing d.i. pipes providing d.i. pipes ( push on joints pressure pipes of d. i. of following class and diameters confirming to the i. s. specificatioinclusive cost of jointing materials ( rubbegasket of epdm quality ) excluding gslevied by goi & gom in all respect including third party inspection charges of tp agency approved by mjp including trans insurance, railway freight, unloading from railway wagon, loading into truck, trans portation to departmental store, unloading, stacking etc. completed as directed by engin`eer in charges ( is 1536 / 2001 for pipes and is 158 / 1969 and is 12820 / 1989 or latest edition / revision with amendments for rubber gaskets. ( is:8329 2000 latest version ) 36 d.i. k 9 37 i ) 100mm 38 ii ) 150mm 39 iii ) 200mm 40 item no.8 providing & supplying isi mark rubber gasket suitable for c.i. or d.i. pipes of all calss for tyton joints including all taxes ( central & local ) , inspection charges, transportion to departmantel stores / site etc. completea ) s.b.r. gaskets for c. i. / d.i. pipes 41 i ) 80mm 42 ii ) 100mm 43 iv ) 150mm 44 v ) 200 mm 45 item no.9 welding in all positions with required number of runs, for m.s. pipe internally and / or externally including gauging wherever necessary fixing, appurtenance & other accessories in connection with pipe laying work as per specificationbasic rate + add 10% for hilly. 46 4mm 47 5mm 48 6mm 49 8mm 50 item no. 10 providing and making lead caulked joint providing and making lead caulked joint with molten lead to cast iron pipes and / or specials of all classes and fitting of following dia including cost of lead and all jointing material, labour, hydraulic testing etc. complete. 51 i ) 80mm 52 ii ) 100mm 53 iv ) 150mm 54 v ) 200 mm 55 item no.11 providing and supplying isi standard ci flanged / s& s specials including all statutory duties &taxes such as gst levied by goi & gom in all respect, railway freight, insurance, unloading from railway wagon, loading into truck transport to departmental store / site, unloading stacking etc. complete. 56 b ) ss special / socketed branch flanged special 57 i ) 80mm to 300mm dia 58 c ) plain ended / palin ended branch flanged special 59 i ) 80mm dia to 300mm dia 60 nut bolts 61 item no.12 providing isi mark g.i. pipe of following class and dia. excluding gst levied by goi and gom in all respect including inspection charges, transportation to stores, etc. complete as per is 1239 / 2004 note : one coupler shall be provided with each full length of pipe cost of which is included in rates below .medium 62 50mm 63 65mm 64 80mm 65 100mm 66 item no.13 lowering laying and jointing g.i. pipes and specials of following class and diameter including conveyance from stores to site of works. all labour, giving satisfactory hydraulic test, etc.complete. eiter undergoubd or in vertical position as directed by engineer in charge. 67 50mm 68 65mm 69 80mm 70 100mm 71 item no.14 excavation for foundation / pipe trenches in erth, soil of all types sand, gravel & soft murrum including removing the execavated material upto a distance of 50 meters & lifts as below, stacking & spreading as directed, normal dewatering , preparing the bed for foundation & excluding backfilling etc.complete. basic rate + add 10% for hilly.area. 72 lift 0 to 1.5 m 73 item no.15 refiling the trenches with available excavated stuff with soft material first over pipeline & then hard material in 15cm layers with all leads & lifts including consolidation, surcharging etc. complete. add 10% h.a 74 mjp ssr 2021 22 p.no.54, i.no.15 75 item no.16 making cross connection to exiting distribution main of any type including excavation breaking & removing existing pipes, lowering, laying, of specials & pipes i the position, refiling, closing the water supply in that area, dewatering & restarting the water supply etc. complete as directed by engineer in charge for following diameter of existing pipeline, irrespectiveof diameter of branch line . ( the number of joints involved will be paid separately depending upon the nature of joints & required pipes, valves & specials will be supplied free of cost at stores 76 80mm 77 100mm 78 150mm 79 200mm 80 item no.17 lowering laying and jointing with sbr ruber gaskets c.i. / d.i.. s / s pipes of various classes with ci / di / ms specials of following diameter in proper position, grade and alignment as directed by engineer in charge including conveyance of material from stores to site of work, including cost of jointing materials and rubber rings labour etc. complete. with rubber ringnote : only sbr rubber gaskets to be used as peris 5382 and is 12820. 81 80mm 82 100mm 83 150mm 84 200mm 85 providing and constructing brick masonry inspection chamber 60cm x 45cm x90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channelshalf round g.s.w. pipes, brick masonry, plastering from inside and with frame fixed in cement concrete with r.c.c. cover medium duty 140kilogramwith frame etc complete. pwd ssr 2022 23, i.no.42.12 add 10% for h.a. 86 as per rate analysis 2 87 item no.19 providing and laying cast in situ / ready mixcement concrete in m20 of trap / granite / quartzite / gneiss metal for steps including steel centering, formwork, laying / pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. the cement mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. ( wooden centering will not be allowed. ) , with fully automatic micro processor based plc with scada enabled reversible drum type mixer / concrete batch mix plant ( pan mixer ) etc. complete. with fine aggregate ( crushed sand vsi grade 88 as per rate analysis 1 89 item no. 20 dismantling dead pipeline g.i. / a.c. / p.v.c. / s.w.h.d.p.e. pipe including cost of necessary excavation and refilling of trenches, breaking the joints, lifting the pipes and stacking to the place as directed by engineer in charge with all leads and lifts including cleaning the surface etc. complete. mjp ssr 2021 22 p.no61, i.no.11 ( a , b ) add 10% for h.a. 90 for m.s. / r.c.c. / c.i. / p.s.c. 91 80mm 92 100mm 93 150mm 94 200mm 95 for g.i. / a.c. / p.v.c / s.w. / h.d.p.e. 96 80mm 97 100mm 98 150mm 99 200mm 100 item no. 21 hdpe pipe providing and supplying in standard lengths polyethelene pipes, confirming to is 4984 / 14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler / specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding gst levied by gi & gom in all respect etc. complete 6 kg / sqcm 101 i ) 63 mm 102 ii ) 75 mm 103 iii ) 110 mm 104 iv ) 160 mm 105 v ) 225 mm 106 item no 22 hdpe pipe lowering, laying and jointing h. d. p. e. / m.d. p. e. pipes in proper position including all specials by compression fitting / electrofusion and butt fusion jointing procedure as per relevent is code complete with all materials for jointing procedure like electrofusion machine, electric heater / butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per is 7634 part ii 107 i ) 63 mm 108 ii ) 75 mm 109 iii ) 110 mm 110 iv ) 160 mm 111 v ) 225 mm 112 item no. 23 hdpe specials providing & supply of electro fusion fittings inaccordance with bs en12201: part 3 suitable for drinking water with in black / blue colour manufactured from compounded pe80 / pe100 virgin polymer and compatible with pe80 / pe100 pipes, in pressure rating sdr11 with min pn12.5 rated for water application and shall be inclusive of all cost such as testing, inspection charges, transportation up to store, transit insurance, loading, unloading, stacking excluding gst levied by goi & gom in all respect, etc. complete 113 couplers 114 i ) 75 mm 115 ii ) 110 mm 116 iii ) 160 mm 117 iv ) 225 mm 118 equal tee 119 i ) 75 mm 120 ii ) 110 mm 121 iii ) 160 mm 122 iv ) 225 mm 123 elbow 90 degree 124 i ) 75 mm 125 ii ) 110 mm 126 iii ) 160 mm 127 iv ) 225 mm 128 reducer 129 110 x 75 mm 130 160 x 110 mm 131 225 x 160 mm 132 item no.24 providing and supplying air valves as per is 14845 2000 and mjp’s standard specifications of approved make and quality of following diameters including railway freight, inspection charges, unloading from railway wagons, loading into truck, transportation upto departmental stores, unloding and stacking excluding gst levied by goi & gom in all respect etc. complete. air valve single ball flanged / screwed type pn 1 mjp ssr 2021 22 p.no135 , i.no.5 a 133 i ) 12 / 15 mm 134 ii ) 20 mm 135 iii ) 25 mm 136 iv ) 32 mm 137 v ) 40 mm 138 vi ) 50 mm 139 item no.25 lowering, laying and fixing in proper alignment and position all types of c.i. air valves as directed by engineer in charge including cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc. complete. ( for all class of valves ) . air valve single ball flanged / screwed type pn 1.6 mjp dsr 2019 20 p.no137 , i.no.10 a 140 i ) 12 / 15 mm 141 ii ) 20 mm 142 iii ) 25 mm 143 iv ) 32 mm 144 v ) 40 mm 145 vi ) 50 mm 146 8mm...

Due Date : October 10, 2023

Tender Value : ₹ Ref. Documents

5

Smart City Development Corporation Limited - Maharashtra

39895818 tender for sant tukaram natyagruh electrical work 1 supplying and laying rigid steel conduit 16 swg 25 mm dia. with necessary accessories in rcc work / false ceiling / false flooring as per specification no: wgma / cc. ( 1 1 4 ) 2 supplying and erecting hms pvc conduit frls grade 25 mm dia. with necessary accessories in wall / floor with chiselling appropriately as per specification no: wg ma / cc ( 1 1 9 ) 3 supplying and layinghms pvc conduit frls grade 25 mm dia with necessary accessories in rcc work / false ceiling / false flooring as per specification no. wg ma / cc ( 1 1 10 ) 4 supplying and erecting hms pvc conduit frls grade25 mm dia. with pvc accessories on wall / ceiling as per specification no: wg ma / con. ( 1 2 4 ) 5 supplying and erecting mains with 2x1.5 sq.mm frlshcopperpvc insulated wire laid in provided conduit / trunking / inside pole / bus bars or any other places as per specification no: wg ma / bw ( 1 3 1 ) 6 supplying and erecting mains with 2x2.5 sq.mmfrlsh copper pvc insulated wire laid in provided conduit / trunking / inside pole / bus bars or any other places. as per specification no: wg ma / bw ( 1 3 2 ) 7 supplying and erecting mains with 3x4 sq.mm frlsh copper pvc insulated wire laid in provided conduit / trunking / inside pole / bus bars or any other places as per specification no: wg ma / bw ( 1 3 7 ) 8 supplying and erecting modular type switch 6a / 10a duly erected on provided plate and box with wiring connections complete. ( 1 6 1 ) 9 supplying and erecting modular type switch 16aduly erected on provided plate and box with wiring connections complete. ( 1 6 2 ) 10 supplying and erecting modular type 3 pin 6amultisocket with safety shutter, duly erected on provided plate and box with wiring connections complete. ( 1 6 10 ) 11 supplying and erecting modular type 3 pin 6 / 16amultisocket with safety shutter, duly erected on provided plate and box with wiring connections complete. ( 1 6 11 ) 12 supplying and erecting modular type t.v. socket single outlet, duly erected on provided plate and box with wiring connections complete. ( 1 6 14 ) 13 supplying and erecting modular type telephone socket one gangwith safety shutter, duly erected on provided plate and box with wiring connections complete. ( 1 6 15 ) 14 supplying and erecting modular type computer jack rj45 with safety shutter, duly erected on provided plate and box with wiring connections complete. ( 1 6 17 ) 15 supplying and erecting modular type ( two module ) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete. ( 1 6 23 ) 16 supplying and erecting modular type blanking plate two module, duly erected on provided plate & box. ( 1 6 25 ) 17 supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly erected flush to wall with required chiselling and finishing with cement mortar / pop as per required to match the background. ( 1 6 35 ) 18 supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement mortar / pop as per required to match the background. ( 1 6 36 ) 19 supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 4 module duly erected flush to wall with required chiselling and finishing with cement mortar / pop as per required to match the background. ( 1 6 37 ) 20 supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement mortar / pop as per required to match the background. ( 1 6 38 ) 21 supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 8 module duly erected flush to wall with required chiselling and finishing with cement mortar / pop as per required to match the background. ( 1 6 39 ) 22 supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 12 module duly erected flush to wall with required chiselling and finishing with cement mortar / pop as per required to match the background. ( 1 6 40 ) 23 supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 16 / 18 module duly erected flush to wall with required chiselling and finishing with cement mortar / pop as per required to match the background ( 1 6 41 ) 24 point wiring for light / bell / exhaust fan in 20 mm frls grade hms pvcconduit with 1.5 sq.mm ( 2+1e ) frlsh grade copper wire, modular type switch, earthingand required accessories as per specification no: wg pw / sw. ( 1 7 12 ) 25 point wiring for ceilingfan in 20 mm frls grade hms pvc conduit with 1.5 sq.mm ( 2+1e ) frlsh grade copper wire, modular type switch, earthingand required accessories as per specification no: wg pw / sw ( 1 7 13 ) 26 point wiring for independent plug in 20 mm frls grade hms pvc conduit with 1.5 sq.mm ( 2+1e ) frlsh grade copper wire, modular type switch, earthing and required accessories as per specification no: wg pw / sw ( 1 7 14 ) 27 point wiring for light / bell hybrid type ( surface type under false ceiling and concealed type for drops & switch boards on walls ) in min 20 mm pvc conduit / casing n capping with 1.5 sq.mm. ( 2+1e ) frlsh grade copper wires, modulartype switch, earthing and required accessories as per specification no: wgpw / hw ( 1 7 15 ) 28 point wiring for ceiling fan ( surface type under false ceiling and concealed type for drops & switch boards on walls ) in min 20 mm pvc conduit / casing n capping with 1.5 sq.mm. ( 2+1e ) frlsh grade copper wires, modular type switch, earthing and required accessories as per specification no: wg pw / hw 29 wiring for plug on board withswitch socket surface / concealed type, copper wiring and earthing and with modular accessories as per specification no: wg pw / cw ( 1 7 26 ) 30 supplying and erecting 2 pair telephone copper cable 0.5 mm dia. with high density polyethylene insulation, polyester taped, nylon rip cord & grey colour sheathed with fr pvc, conforming to itd specification s / ws 113c laid in provided pvc casing capping / conduit as perspecification no. wg tw ( 1 8 1 ) 31 supplying and erecting 50 pair telephone copper cable 0.5 mm dia. with high density polyethylene insulation, polyester taped, nylon rip cord & grey colour sheathed with fr pvc, conforming to itd specification s / ws 113c laid in provided pvc casing capping / conduit as perspecification no. wg tw ( 1 8 7 ) 32 supplying and erecting 15m vga cord low voltage gradeto be laid in provided conduits and terminating with male / female vga connectors complete. ( 1 8 20 ) 33 supplying, erecting and commissioning ofmdf box 50x50 pairs made from min. 1.5mm thick ms sheet as per specification no. wg tw ( 1 9 1 ) 34 supplying and installingexpansion cabinet for extension of digital hybrid epabx to expand system by 32 ports with programming and configuration of extensions and direct lines with required accessories complete. ( 1 9 33 ) 35 supplying and installingcat 6 cable suitable for networking as per specification no. wg coc / nc ( 1 10 1 ) 36 supplying, fixing, and configuring8 ports managed gigabit, layer 2 switch, 10 / 100 / 1000 base t, poe smart switch plus 2 sfp erected in provided rack complete. ( 1 11 2 ) 37 supplying, installing & testing utp connector ( rj 45 ) as per specification no. wg nas / utpc. ( 1 12 1 ) 38 supplying and fixing42 u floormount server rack ( dimension dxwxh – 800x1000x2070 mm ) as per specification no. wg nas / rak ( 1 12 29 ) 39 supplying and erecting led square / circular max. 18 w down lighter / panel light having pressure die cast aluminium housing, polystyrene diffuser having system lumens output of min. 2000 lumens, min. efficacy of 110 lumen / w, cri>80, cct upto 6500k, beam angle of 120 deg., max. ripple of 5%, thd<10%, p.f. >0.95, operating range of120 270v, surge protection of 2.5 kv, life class of 50, 000 hrs. at l70b50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. ( 2 1 5 ) 40 supplying and erecting led square / circular max. 25 w down lighter / panel light having pressure die cast aluminium housing, polystyrene diffuser having system lumens output of min. 2750 lumens, min. efficacy of 110 lumen / w, cri>80, cct upto 6500k, beam angle of 120 deg., max. ripple of 5%, thd<10%, p.f. >0.95, operating range of120 270v, surge protection of 2.5 kv, life class of 50, 000 hrs. at l70b50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. ( 2 1 6 ) 41 supplying and erecting ledpanel light ( 600mm x 600mm ) max. 35 whaving crca powder coated housing, polystyrene diffuser havingsystem lumens output of min 4200 lumens, min. efficacy of 120 lumen / w, cri>80, cct upto 6500k, beam angle of 120 deg., max. ripple of 5%, thd<10%, p.f. >0.95, operating range of120 270v, surge protection of 2.5 kv, life class of 50, 000 hrs. at l70b50including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. ( 2 1 8 ) 42 supplying and erecting anodized aluminium corridor / passage light led fitting ( 4 feet ) max. 22wwith high transitivity diffuser withsystem lumens output ofmin.2200 lumens , min. efficacy of 100 lumen / w, cri>80, cct upto 6000k, beam angle of 110 deg., ripple<5%, thd<10%, p.f. >0.95, operating range of200 270v, surge protection of 2 kv, life class of 50, 000 hrs. at l70b50, including driver, with end caps on provided pvc block / wooden board with 3 years warranty. ( 2 1 18 ) 43 supplying and erecting inverter led batten 20w tube light fitting with polycarbonate housing, heat sink, integrated hf electronic driver, min. 2600 mah lithium ion battery with charging time of 8 10 hours and backup time of min. 3 hrs. with minimum 25% of initial watts having luminous efficacy of 100 lumen / watt, cri>80, cct of 6500k and thd<=20% havinguseful life of minimum 25000 hrs. with overheating protection with 2 years warranty. ( 2 1 22 ) 44 supplying and erecting uv fly killer / bug catcher light fittinghaving 2 x 20w uv tube lights to cover min. area of 500 sq.ftwith powdered coated m.s. / steel body suitable to work on 230v, ac supply having top mounting arrangement with ss chain complete and 3 core 1 mtr. flexible wire with 1 year warranty. ( 2 1 23 ) 45 supplying and erecting ding dong / electronic musical type call bell with heavy duty coilsuitable to operate on 230v a.c. supply erected on polished double wooden block / sunmica block of suitable size. ( 2 3 13 ) 46 supplying and erecting exhaust fan medium duty 230 v a.c. 50 cycles 225 mm. 1400 rpm with condenser complete erected in position with necessary materials. fan motor with moisture proof treatment and ‘e’ class insulation. ( 2 10 15 ) 47 supplying and erecting energy saving bldc ceiling fan 230 v a.c. 50 cycles 1200 mm, max. energy consumption of28w having service ratio ( cmm / w ) of min. 8 , pf>0.9, thd<10% with ir remote control / compatible speed regulator, temperature rise of max. 40 deg. c, having external mounted control pcb completely erected in position as per specification no. fg fn / cf ( 2 10 22 ) 48 supplying and fixinganchor type fastener fan hook, with 2 nos. of 10 mm dia x 75 mm long with necessary materials for ceiling fan. ( 2 11 2 ) 49 supplying and erecting fan clamp of 30 x 5 mm. m.s. flat of required length and 10 mm.m.s. bolt and nuts erected with necessary hook of 10 mm. m.s. round bar and painted. ( 2 11 3 ) 50 supplying and erecting ‘b’ class g.i .pipe / m.s. pipe down rod duly painted for fan complete erected with pvc three core flexible cable 1 sq. mm copper pvc wire. ( 2 11 6 ) 51 providing recess in brick wall suitable for erection of exhaust fan up to 450mm. sweep complete with grouting of nut, bolts, plastering and colour washing to match the colour of the wall for the wall thickness of 225 mm. ( 2 11 11 ) 52 supplying and erecting 20 swg g.i sheet metal cawl rectangular / round shaped with 25 x 25x 3 ( mm ) angle iron frame, metal mesh to avoid birds entry with necessary material, suitable for exhaust fan of 300 mm as per specification no fg fas / msc ( 2 11 17 ) 53 supplying and erecting storage type water heater 25 litres capacity having standing loss <0.511kwh / 24hour / 45°c, high impact resistance engineering plastic body with anti corrosive high grade steel inner tank, heating element having hard water & corrosion protection, with minimum 3 safety protections ( i.e. thermostat & thermalfunctioncut out, valve ) with total pressure 8 bar withstanding capacity duly tested and marking sr. no. and date of erection complete. specification no. ap wh / stwh ( 3 1 2 ) 54 supplying, erecting, testing and commissioning ofself contained water cooler 230 / 250v 50hz nominal cooling capacity of 150 litres per hour and storage capacity 150 litres with partially stainless steel body as per specification no. ap wcr / wc ( 3 3 10 ) 55 supplying, installing, testing and commissioning of10kva capacity onlinepure sine wave with backup time of ....... hrs. pwm & igbt based ups with 0.9 to unity output pf, 3 phase input & 1 phase output complete with all protectionsas per specification no. ap ups ( 3 7 6 ) 56 supplying and erecting 12v / 100ah smf battery with battery terminal wire, duly charged with 24 months warranty complete. ( 3 8 12 ) 57 supplying and erecting on load four pole automatic transfer switch, 415v, 400a, 50 hz with enclosure, flexibility of neutral connection, line and load reversibility, changeover with phase barriers, source separator, terminal covers along with staggered termination for cable connection and ats controller with provision of time delay protection of ov, uv, phase sequence changing, single phasing and event logging, connected with provided leads complete complying to is / iec 60947 3 part 1 / 6 . ( 5 1 14 ) 58 supplying, erectingandmarking spmcb 6a to 32a, c serieswith rated short circuit breaking capacity ( icn ) 10ka in provided distribution board as per specification no. sw swr / mcb ( 5 3 2 ) 59 supplying, erectingandmarking spmcb 6a to 32a, b series with rated short circuit breaking capacity ( icn ) 10ka in provided distribution board as per specification no. sw swr / mcb ( 5 3 3 ) 60 supplying, erectingandmarking spmcb 40a to 63a, b series with rated short circuit breaking capacity ( icn ) 10ka in provided distribution board as per specification no. sw swr / mcb ( 5 3 5 ) 61 supplying, erectingandmarking dpmcb 6 a to 32 a, b series with rated short circuit breaking capacity ( icn ) 10ka in provided distribution board as per specification no. sw swr / mcb ( 5 3 7 ) 62 supplying, erectingandmarking dpmcb 40a to 63a, c series with rated short circuit breaking capacity ( icn ) 10ka in provided distribution board as per specification no. sw swr / mcb ( 5 3 8 ) 63 supplying, erectingandmarking tpmcb 6a to 32a, with rated short circuit breaking capacity ( icn ) 10ka in provided distribution board as per specification no. sw swr / mcb ( 5 3 10 ) 64 supplying, erectingandmarking tpmcb 40a to 63a, with rated short circuit breaking capacity ( icn ) 10ka in provided distribution board as per specification no. sw swr / mcb ( 5 3 11 ) 65 supplying and erecting triplepole and neutral distribution board ( tpndb ) , sp / tp mcbs total 4 ways / 12 poles, with door, 1.2mm thickness surface / flushmounted, ip 43 protection on iron / gi frame ( vertical busbar type ) as per specification no. sw swr / mcbdb ( 5 4 4 ) 66 supplying and erecting triplepoleand neutral distribution board ( tpndb ) , sp / tp mcbs total 8 ways / 24 poles, with door, 1.2mm thickness surface / flush mounted, ip 43 protection on iron / gi frame ( vertical busbar type ) as per specification no. sw swr / mcbdb ( 5 4 5 ) 67 supplying and erecting triplepoleand neutral distribution board ( tpndb ) , sp / tp mcbs total 12 ways / 36 poles, with door, 1.2mm thickness surface / flushmounted, ip 43 protection on iron / giframe ( vertical busbar type ) as per specification no. sw swr / mcbdb ( 5 4 6 ) 68 supplying and erecting single pole and neutral distributionboard ( spndb ) , with 2 ways for incoming and 6 ways ( 6 poles ) for outgoing sp mcbs, with door, 1.2mm thickness surface / flush mounted, ip 43 protection on iron / gi frame as per specification no. sw swr / mcbdb ( 5 4 8 ) 69 supplying and erecting single pole and neutral distributionboard ( spndb ) , with 2 ways for incoming and 10 ways ( 10 poles ) for outgoing sp mcbs, with door, 1.2mm thickness surface / flush mounted, ip 43 protection on iron / gi frame as per specification no. sw swr / mcbdb ( 5 4 9 ) 70 providing and erecting 3 pole mccb, 415 v, 100a, rated short circuit breaking capacity 25 ka ( ics=100% of icu ) , adjustable thermal ( overload ) setting and fixed magnetic setting with provided leads, provision for installation of shunt / uv / trip alarm contact.mccb with phase barriers on both sides, insulation withstand capacity 800v, no line load bias in provided enclosure / panel as per specification no. sw swr / mccb ( 5 5 1 ) 71 providing and erecting 3 pole mccb 415v, 250a, rated short circuit breaking capacity 36 ka ( ics=100% of icu ) adjustable thermal ( overload ) setting and adjustable magnetic setting with provided leads, provision for installation of shunt / uv / trip alarm contact and mccb should have phase barriers both sides, with insulation withstand capacity 800v, no line load bias in provided enclosure / panel as per specification no. sw swr / mccb ( 5 5 3 ) 72 providing and erecting 3 pole mccb 415v, 400a, rated short circuit breaking capacity 36 ka ( ics=100% of icu ) , adjustablethermal ( overload ) setting and adjustable magnetic setting with provided leads, provision for installation of shunt / uv / trip alarm contact and mccb should have phase barriers both sides, with insulation withstand capacity 800v, no line load bias in provided enclosure / panel as per specification no. sw swr / mccb ( 5 5 4 ) 73 providing and erecting 3 pole mccb 415v, 630a, rated short circuit breaking capacity 36 ka ( ics=100% of icu ) , adjustable thermal ( overload ) setting and adjustable magnetic setting with provided leads, provision for installation of shunt / uv / trip alarm contact and mccb should have phase barriers both sides, with insulation withstand capacity 800v, no line load bias in provided enclosure / panel as per specification no. sw swr / mccb ( 5 5 5 ) 74 providing and erecting 3 pole mccb, 415v, 800a, rated short circuit breaking capacity 50 ka ( ics=100% of icu ) , adjustable thermal ( overload ) setting and adjustable magnetic setting with provided leads, provision for installation of shunt / uv / trip alarm contact and mccb should have phase barriers both sides, with insulation withstand capacity 800v, no line load bias in provided enclosure / panel as per specification no. sw swr / mccb ( 5 5 6 ) 75 supplying, fixing, and commissioning 4 polercbo 6 / 10 / 16 / 20 / 25a, with overcurrent, rated short circuit breaking capacity ( 10 ka ) and earth leakage protection, with 30 / 100 / 300 ma sensitivity and short circuit and earth leakage trip indications per specification no sw rccb / rcbo ( 5 6 12 ) 76 supplying, installing, testing and commissioning ofair circuit breaker manual fixed type, non drawout type, 650v, 1000a rated at 50º c without deration, 12kv impulse, 4 pole ( 100% neutral protection ) , 50 ka ( ics=icu=icw for 1s ) , with standard accessories with ready to close, individual fault trip, alarm and tripindication, mechanical and electrical anti pumping, soft / hard rating plug ( including hard rating plug ct ) with micro processer based lcd display release with lsig and temperature rise protection & with 4 c / o contacts for on off trip indication, min. 5 event and trip history on breaker display on provided iron frame as per specification no. sw swr / acb ( 5 8 3 ) 77 supplying and erecting metal work in crca sheet including iron work for supportswith fabrication ofboxes, panelboards, etc. including cutting, bending, drilling, welding, riveting, treated with anti rust treatment andduly powder coated or paintedwith one coat of red lead paint and 2 coats of enamel paint complete. ( 6 1 1 ) 78 supplying and erecting iron work, sheet metal work consisting of crcasheets, varioussectionsofiron, plates, chequeredplates, rods, bars, mspipes, etc. forpanel board or any other purpose with bending, cutting, drilling and welding completeerectedatthepositionwith necessarymaterialsdulypaintedwith one coat of red oxide and two coats of enamelpaint to match the switchgears or as per directions by the authority. ( 6 1 19 ) 79 supplying and erecting 250 kvar, 3 phase, 50 hz., power contactors derated for microprocessor apfc controller with mpp / app type capacitor with 525 v and having minimum overcurrent capacity of 1.8 in, peak inrush current capacity 300 inand minimum life 150000 hours with , consisting of suitable steps of mpp / app type capacitor unitswith detuned aluminium filter 7% reactors with circuit breaker as main incomer and mccb for each branch protection, as per specification no cp ed / apfc ( 6 7 17 ) 80 supplying, erecting & terminating fr xlpe insulated, galvanised steelformed wire armoured ( strip ) cable 1100 v, 3½ core 25 sq. mm. aluminiumconductor complete erected with glands & lugs, on wall / trusses / pole or laid inprovided trench / pipe as per specification no. cb lt / al 81 supplying, erecting & terminating fr xlpe insulated, galvanised steelformed wire armoured ( strip ) cable 1100 v, 3½ core 35 sq. mm. aluminiumconductor complete erected with glands & lugs, on wall / trusses / pole or laid inprovided trench / pipe as per specification no. cb lt / al 82 supplying, erecting & terminating fr xlpe insulated, galvanised steelformed wire armoured ( strip ) cable 1100 v, 3½ core 50 sq. mm. aluminiumconductor complete erected with glands & lugs, on wall / trusses / pole or laid inprovided trench / pipe as per specification no. cb lt / al 83 supplying, erecting & terminating fr xlpe insulated, galvanised steel formedwire armoured ( strip ) cable 1100 v, 3½ core 150 sq. mm. aluminiumconductor complete erected with glands & lugs, on wall / trusses / pole or laid inprovided trench / pipe as per specification no. cb lt / al 84 supplying, erecting & terminating fr xlpe insulated, galvanised steelformed wire armoured ( strip ) cable 1100 v, 3½ core 300 sq. mm. aluminiumconductor complete erected with glands & lugs, on wall / trusses / pole or laid inprovided trench / pipe as per specification no. cb lt / al 85 supplying and erecting g.i. pipe ‘a’ class75 mmdia.erectedfor enclosingxlpearmouredcable on wall / poleas per specification no. cb ce ( 7 6 4 ) 86 providing and erecting hot dipped galvanised cover suitable for perforated type cable tray manufactured from 18 swg ( 1.2 mm thick ) gi sheet of 200 mm width & 20 mm height complete with necessary hardware. ( 7 11 12 ) 87 providing and erecting hot dipped galvanised cover suitable for perforated type cable tray manufactured from 18 swg ( 1.2 mm thick ) gi sheet of 500 mm width & 20 mm height complete with necessary hardware. ( 7 11 15 ) 88 providing pipetype earthing with 40mm. dia. g.i. pipe or 20 mm dia. g.i. rodcomplete with all materials testing and recording the results as per specification no. ea ep ( 9 1 4 ) 89 supplying and erecting aluminium strip of high purity required sizes used for earthing on wall and / or any other purpose with necessaryaluminiumclampsfixed on wall painted with bituminous paint with joints required as per specification no ea ep. ( 9 2 1 ) 90 supplying and erecting conventionalspike typeair termination suitable to carry lightning stroke made up of heavy gauge40 mm dia copper pipe of standard length with 5 nos. copper spikes fixed on copper ball as air terminals duly threaded in copper pipeerected on provided foundation complete. ( 9 3 1 ) 91 providing and back filling ground enhancing compound 25 kg bag complete. ( 9 3 2 ) 92 supplying, installation and testing of maintenance free earthing comprising ofelectrode of 17.2 mm diameter low carbon steel with 250 micron molecularcopper bonded earthing rod of length 3m along with 25 kg carbon basedenvironment friendly back fill ground enhancing compound required to fill up theexcavated earth with required quantity complete, and recording the resultsspecification no. ea mobi ( 9.1.5 ) 93 supplying, erecting, testing and commissioning3 10 watt smart wired led ceiling lamp downlighter wiz connected ( shades of white / warm white + dimmable + pre set modes ) ( non csr ) 94 supplying, erecting, testing and commissioning of wall / floor mounted three phase 415 v electronic dimmer 12x4 kw having rectangular shape semi automatic / dmx type, with ryb indicator, having 24 input jackwith crca housing min 22 gauge with all internal mcb, wiring, controlling accessories complete ( non csr ) 95 supplying and erecting pvc insulated pvc round sheathed 1.5 sq.mm ( 30 no. x 0.25 mm dia. ) 3 core flexible multi stranded copper industrial cable for voltage grade up to 1.1 kv ( 1 3 14 ) 96 supplying and erecting integrated led street light fitting 60w ip65 & ik08 class having single piece pressure die cast aluminium housing, havingsystem lumens output of min. 6600 lumens, min. efficacy of 110 lumen / w, cri>70, cct upto 6500k, thd<10%, p.f. >0.95, operating range of140 270v, inbuilt surge protection of 10 kv, life class of 50, 000 hrs. at l70b50, including driver complete with 3 years warranty as per specification nofg odf / fls2. ( 2 4 5 ) 97 supplying and erecting three phase, 415v, street light control panel up to the max load of 6kw, tpn mcb 40a, powder coated crca 14 swg sheet, outdoor type, having ip54, ik10 protection, suitable rating contactor, 24 hrs. astronomical time switch with minimum 5 years battery back up, auto / manual selector switch, on / off push buttons, indicator lamps, control wiring, metering device, etc. for automatic operation, with overcurrent, short circuit, earth fault protectionon provided iron frame / cc foundation . ( 5 2 5 ) 98 supplying, erecting & marking spmcb 0.5a to 5a, c series with rated short circuit breaking capacity ( icn ) 10ka in provided distribution board as per specification no. sw swr / mcb ( 5 3 1 ) 99 supplying, erectingandmarking tpmcb 40a to 63a, with rated short circuit breaking capacity ( icn ) 10ka in provided distribution board as per specification no. sw swr / mcb ( 5 3 11 ) 100 supplying & erecting triple pole and neutral distribution board ( tpndb ) , 3 pole / 4 pole mccb as incomer & outgoing sp mcb ( 12 poles ) or tp mcb of 4 ways ( 12 poles ) , with door, 1.2mm thickness, surface / flush mounted, on iron / gi frame ( vertical busbar type ) as per specification no. sw swr / mcbdb1 ( 5 4 15 ) 101 supplying and erecting gi sheet 1.6mm ( 16 swg ) caution board of size 250 x 200 mm duly painted with red oxide and enamel paint in marathi, hindi and english erected at position for hv / ehv ( 11000 volts ) installation with compliance to is 2551 1982 ( 6 1 16 ) 102 supplying and erecting iron work, sheet metal work consisting of crcasheets, varioussectionsofiron, plates, chequeredplates, rods, bars, mspipes, etc. forpanel board or any other purpose with bending, cutting, drilling and welding completeerectedatthepositionwith necessarymaterialsdulypaintedwith one coat of red oxide and two coats of enamelpaint to match the switchgears or as per directions by the authority. ( 6 1 19 ) 103 supplying, erecting & terminating xlpe insulated, galvanised steel formed wire armoured ( strip ) cable 1100 v, 4 core 6sq. mm. aluminium conductor completeerected with glands & lugs, on wall / trusses / pole or laid in provided trench / pipeas per specification no. cb lt / al ( note for use of xlpe insulation instead of fr xlpe insulated armoured cable reduce rates by 5 % ) ( 7 1 27 ) 104 supplying, erecting & terminating xlpe insulated, galvanised steel formed wire armoured ( strip ) cable 1100 v, 4 core 25 sq. mm. aluminium conductor completeerected with glands & lugs, on wall / trusses / pole or laid in provided trench / pipeas per specification no. cb lt / al ( note for use of xlpe insulation instead of fr xlpe insulated armoured cable reduce rates by 5 % ) ( 7 1 30 ) 105 supplying andlaying ( including excavation of suitable width & depth up to 90 cm ) 50 mmoutside dia. double wall corrugatedpipes ( dwc ) ofhdpe for enclosing cable below ground / road surface, to required depth complete. 106 providing and erecting 6 m high ( clear height ) galvanised octagonal pole with foundation bolts having bottom of 130 mm a / f, top 70 mm a / f on provided foundation as per specification no. oh pl / opl ( 8 2 12 ) 107 providing and erecting galvanised 1000mm single arm sword type bracket with frp dome and ball as per specification no. oh pl / pbkt ( 8 2 21 ) 108 providng earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. ea ep ( 9 1 1 ) 109 providing pipetype earthing with 40mm. dia. g.i. pipe or 20 mm dia. g.i. rodcomplete with all materials testing and recording the results as per specification no. ea ep ( 9 1 4 ) 110 supplying and erecting gi strip of high purity required size used for earthing on wall and / or any other purpose with necessary gi clampsfixed on wall painted with bituminous paint with joints required. as per specification no ea ep. ( 9 2 3 ) 111 making cement concretefoundationin 1:3:6 cement concrete, ( 20 to 25 ) mm. stone metal duly plastered with necessary curing forcomplete. ( pole muffing or any other purpose ) . ( 16 3 7 ) 112 makingm 20 grade reinforced cement concretefoundation by considering the safe soil bearing capacity at site as 10 t / sq.mat 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete ( for 6m to 8m high octagonal / conical gi pole ) . ( 16 3 9 ) 113 supplying, erectingandmarking tpmcb 40a to 63a, with rated short circuit breaking capacity ( icn ) 10ka in provided distribution board as per specification no. sw swr / mcb ( 5 3 11 ) 114 supplying, fixing, and commissioning mcb type change over switch 4 pole, 40a with 3 positions ( i o ii ) with centre off position as per specification no. sw swr / mcbcos ( 5 3 25 ) 115 supplying and erecting crca sheet metal one way enclosures of 1.2mm thickness suitable for dp mcb / tp mcb / fp mcb / rccb / rcbo complete erected on angle iron / gi frame. ( 5 4 13 ) 116 supplying, erecting & terminating fr xlpe insulated, galvanised steel formed wire armoured ( strip ) cable 1100 v, 4 core6sq. mm. aluminium conductor completeerected with glands & lugs, on wall / trusses / pole or laid in provided trench / pipeas per specification no. cb lt / al ( 7 1 27 ) 117 supplying and erecting g.i. pipe‘a’ class 40 mmdia.erectedfor enclosingxlpearmouredcable on wall / poleas per specification no. cb ce ( 7 6 2 ) 118 supplying and laying ( including excavation ) of suitable width & depth up to 90 cm ) 50 mmoutside dia. double wall corrugatedpipes ( dwc ) ofhdpe for enclosing cable below ground / road surface, to required depth complete. ( 7 6 9 ) 119 providing earthing with galvanizediron earth plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block c.l. covercomplete with all materials, testing & recording the results asper specification no. ea ep ( 9 1 3 ) 120 providing pipetype earthing with 40mm. dia. g.i. pipe or 20 mm dia. g.i. rodcomplete with all materials testing and recording the results as per specification no. ea ep ( 9 1 4 ) 121 supplying and erecting minimum three & above star rated submersible pump set of 2.25 kw / 3 hp with 415 v, 50 c / s ac supply suitable for 100 mm dia. borewell suitable for 60 to 170 lpm discharge at 97 to 30 m head & discharge & delivery pipe of size 40 mm diameter with a necessary h type clamps as per specification no. wp smp 122 supplying and erecting minimum three & above star rated submersible pump set suitable for erection on open well of 5.625 kw / 7.5 hp with 415 v 50 c / s. a.c. supply, having delivery head from 36 to 14m and discharge from 225 to 1680 litres. per minute& pipe of suction 75 mm / delivery 65 mm diameter erected with necessary h type clamps as per specification no. wp osp ( 12 3 3 ) 123 supplying and erecting flat flexible 3 core 2.5 sq.mm pvc sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete. ( 12 4 8 ) 124 supplying and erecting flat flexible 3 core 4 sq.mm pvc sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete. ( 12 4 9 ) 125 supplying and erecting water level controller 230 / 415 v, a.c. , four way under ground & over head tank operation only. ( 12 4 15 ) 126 supplying & erecting pvc coated 5 mm dia. brass sensor / electrode duly wired with nuts & bolts complete ( set of 3 nos ) . ( 12 4 15 ) 127 supplying and erecting automatic control panel for 3 phase , 415 volt, a.c, submersible / centrifugal pump set up to 7.5 hp consisting of dol starter having relay range 9 14 amp, s.p.p., combined ammeter / voltmeter, phase indicating lamp enclosed in crca powder coated vibration proof enclosure with ip 54 protection. control panel should offer single phasing, phase reversal, phase imbalance etc . ( 12 4 17 ) 128 excavating hard rock or bituminous road by chiselling for preparing pit for pole / stay / earth plate / for laying cable / pipe & clearing the site by removing debris & making the site as required complete. ( 16 1 5 ) 129 making cement concretefoundationin 1:3:6 cement concrete, ( 20 to 25 ) mm. stone metal duly plastered with necessary curing forcomplete. ( pole muffing or any other purpose ) . ( 16 3 7 ) 130 supplying and erecting isi mark gi pipe 50 mm dia.‘b’ class at position with accessories complete as per specification no. cw plb / gp. ( 16 5 6 ) 131 supplying and erecting isi mark gi pipe 75 / 80 mm dia. ‘b’ class at positionwith accessories complete. specification no. cw plb / gp. ( 16 5 8 ) 132 supplying and erecting high density polythene pipe isi mark 50 mm. dia. suitable for pressure of 6 kg. / cm2 connected tojet / submersible pump with required material complete. ( 16 5 18 ) 133 supplying and erecting 50 mm dia. gun metal sluice valve at position with necessary materials complete. ( 16 6 15 ) 134 supplying and erecting non return valve 50 mm dia in position made of gun metal complete. ( 16 6 21 ) 135 supplying and erectinghms pvc conduit frls grade 25 mm dia. with necessary accessories in wall / floor with chiselling appropriately as per specification no: wg ma / cc. 1 1 9 136 supplying and laying hms pvc conduit frls grade 25 mm dia with necessary accessories in rcc work / false ceiling / false flooring as per specification no. wg ma / cc. 1 1 10 137 supplying and erecting 25 mm dia. corrugated flexiblepolypropylene conduit 1 2 2 138 supplying and erecting 10m hdmi cord low voltage grademinimum 4k compliant to be laid in provided conduits with male / female 19 pin hdmi connectors complete.. 1 8 23 139 supplying and installingcat 6 cable suitable for networking as per specification no. wg coc / nc 1 10 1 140 supplying, fixing, and configuring 24 ports, poe switch in provided rack as perspecification no. wg nwc / ens ( 1 11 3 ) 141 supplying, installing and testing utp connector ( rj 45 ) as per specification no. wg nas / utpc. 1 12 1 142 supplying and fixing 9u wall mount rack ( dimension dxwxh – 500x600x500 mm ) as per specification no. wg nas / rak1 12 18 143 supplying and fixing 24 ports light guide unloaded interconnect unit, wall mounted type, with adapter panel for termination of optical fibre cables onwall in provided u rack complete as per specification no. wg nas / liu 1 12 8 144 supplying, installing, testing and commissioning of2kva capacity online pure sine wave, with backup time of 03 hrs. pwm & igbt based ups with 0.8 to unity output pf, single phase input & 1 phase output complete with all protections as per specification no. ap ups ( 3 7 2 ) 145 supplying and erecting 12v / 100ah smf battery with battery terminal wire, duly charged with 24 months warranty complete. ( 3 8 12 ) 146 supplying, erecting, testing & commissioning 5 mp full ip dome camera complete. camera sensor 1 / 2.7, 5.0 megapixel, progressive scan, cmoslens 2.8mm@f2.0dori distance 42 meter detectshutter auto / manual, 1 ~ 1 / 100000s colour: 0.01lux ( f2.0, agc on ) minimum illumination 0lux with ir ondigital noise reduction 2d / 3d dnrday / night ir cut filter with auto switch ( icr ) s / n >52dbir range up to 30m ( 98ft ) ir rangewavelength 850nmir on / off control auto / manualdefog digital defogwdr dwdrvideo max. resolution 2592 x 1944video compression ultra 265, h.265, h.264, mjpegh.264 code profile baseline profile, main profileframe rate main stream: 5mp ( 2592*1944 ) , min 25fps; sub stream: 720p ( 1280×720 ) , min 20fpsvideo bit rate 128 kbps~16 mbpsosd up to 4 osdsprivacy mask up to 4 areasroi up to 2 areasmotion detection up to 4 areasimage white balance auto / outdoor / fine tune / sodium lamp / locked / auto2digital noise reduction 2d / 3d dnrsmart ir supportflip normal / vertical / horizontal / 180°dewarping nahlc supportedblc supportednetwork protocols ipv4, igmp, icmp, arp, tcp, udp, dhcp, rtp, rtsp, rtcp, dns, ddns, ntp, ftp, upnp, http, https, smtp, ssl, qosinterface 10 / 100m base tx ethernetcompatible integration onvif ( profile s, profile t ) , apicertifications certifications ce: en 60950 1 / ul: ul60950 1 / fcc: fcc part 15 ( include – 12 month fully compressive warranty ) ( rates are as per sanct.lt.no.431 dt.22.03..2022 ) ( non csr ) 147 supplying, erecting, testing & commissioning 5 mp full ip bullet camera complete. camera sensor 1 / 2.7, 5.0 megapixel, progressive scan, cmoslens 4.0mm@f2.0dori distance 60 meter detectshutter auto / manual, 1 ~ 1 / 100000s colour: 0.01lux ( f2.0, agc on ) minimum illumination 0lux with ir ondigital noise reduction 2d / 3d dnrday / night ir cut filter with auto switch ( icr ) s / n >52dbir range up to 30m ( 98ft ) ir rangewavelength 850nmir on / off control auto / manualdefog digital defogwdr dwdrvideo video compression ultra 265, h.265, h.264, mjpegh.264 code profile baseline profile, main profileframe rate main stream: 5mp ( 2592*1944 ) , min 25fps; sub stream: 720p ( 1280×720 ) , min 20fpsvideo bit rate 128 kbps~16 mbpsosd up to 4 osdsprivacy mask up to 4 areasroi up to 2 areasmotion detection up to 4 areasimage white balance auto / outdoor / fine tune / sodium lamp / locked / auto2digital noise reduction 2d / 3d dnrsmart ir supportflip normal / vertical / horizontal / 180°dewarping nahlc supportedblc supportednetwork protocols ipv4, igmp, icmp, arp, tcp, udp, dhcp, rtp, rtsp, rtcp, dns, ddns, ntp, ftp, upnp, http, https, smtp, ssl, qosinterface 10 / 100m base tx ethernetcompatible integration onvif ( profile s, profile t ) , apicertifications certifications ce: en 60950 1 / ul: ul60950 1 / fcc: fcc part 15 ( non csr ) 148 supplying, erecting, testing & commissioningcamera nvr 32 channel system specifications :32ch with 4k real time live preview max 32q mbps incoming bandwidth with h.265 compression, decoding support upto 4 x 4k@30, 8 x 4mp@20 on vif version 2.4 conformance vca search and smart search for playback support 8 sata hdd up to 64tb with raid configuration, 2 usb 2.0, 1 usb. ( non csr ) 149 supplying and installation testing & commissioning of surveillance internal hdd ( hard disk drive ) internal hdd supply , installation testing and commissioning for surveillance hddrecording capacity 8tb. ( non csr ) 150 supplying, erecting, commissioning & testing screen ( 108 cm ) / 40 inchpecifications general o screen size : 108 cm ( 43 ) • screen type : led • hd technology & resolution : full hd tv, 1920 x 1080 • hdmi : 3, usb : 1 • launch year : 2018 onnectivity features : hdmi, 2 side : usb o 1 side video features • contrast ratio : mega contrast ( static ) • picture engine : hyper real • view angle : 178 degree • panel type : a+, digital noise filter : yes • led display type : direct • aspect ratio16:09 • refresh rateo 60 hz • other video features o pmi 300: clarity, color, contrast, active noise reduction, dynamic color enhancer o picture mode: 8 modes ( vivid, standard, aps, cinema, cricket, game, expert1, expert2 ) o picture: jpeg, digital noise reduction, movies support in usb mode, mpeg h.264 decoder o response time: 6.5 ms, still image, wide color enhancer ( plus ) , film mode, cricket mode audio features • number of speakers : 2 • speaker type: down firing with bass reflex • sound technology : dolby digital plus • speaker output rms : 20 w warranty • warranty summary : 1 year comprehensive and 1 year additional on panel. ( non csr ) ...

Due Date : October 04, 2023

Tender Value : ₹ 85.19 Lakhs

6

Ministry Of Defence - Maharashtra

39891764 auction of items found unserviceable at mt section of nda khadakwasla are being carried out. led clock water purifier distilled water plant padlock flex board 6x8 ft flex board 4x7 ft nda crest star box flag rod hydraulic jack 2 ton star steel comp tool kit hand grinder foot step for mid door fan flag rod flag rod stand flag rod hydraulic jack 10 ton bicycle & scrap items rubber tyres and tubes ...

Due Date : October 07, 2023

Tender Value : ₹ Ref. Documents

7

Indian Army - Maharashtra

39880395 bids are invited for 50 ton hydraulic jack power pack (q3) total quantity : 2...

Due Date : October 11, 2023

Tender Value : ₹ Ref. Documents

8

Department Of Heavy Industry - Maharashtra

39880355 bids are invited for sitc of active and passive network for htc shl cat 6 cable , jack panel , cat 6 io , patch cord 1 , patch cord 2 , faceplate , surface mount box , concealed mount box , fiber cable , fiber optic patch panels , fiber patch cord , switch , dac module , network rack , 1 inch pvc casing n caping , 1.5 inch pvc casing n caping , 2 inch pvc casing n caping , 1 inch pvc conducts , 2 inch pvc conducts , 1 inch flexible pipe , 2 inch flexible pipe , 0.75 inch metal flexible algi pipe , pvc trunking system , installation total quantity : 1447...

Due Date : October 07, 2023

Tender Value : ₹ Ref. Documents

9

Hindustan Aeronautics Limited - Maharashtra

39878702 tender for design and development of tripod hydraulic jack for main and nose ....

Due Date : October 17, 2023

Tender Value : ₹ Ref. Documents

10

Rural Development Department - Maharashtra

39877119 tender for garbage vehicle purchase for grampanchayat bela , tah. umred. dist. nagpur 2023 / 24 , garbage vehicle tata ace gold bs6 ( desiel ) with garbage hydraulic power pack with jack box dumper, dry and wet seperate comparatment ( note : registration, insurance and all taxes inc. ) ...

Due Date : October 03, 2023

Tender Value : ₹ Ref. Documents

11

Central Railway - Maharashtra

39872050 supply of two line cordless telephone with following minimum features: handset with caller id, frequency 1.9 ghz, frequency range 1.92 ghz 1.93 ghz, number of channels: 60 channels. dect6.0, number of phone lines : 2, multiple handsets capability up to 6 handsets, lcd language english, noise reduction, conference call with outside line, 3 way intercom ( i.e. handset to base unit ) . lcd for cordless unit with caller id features 1.8 inch full dot or higher lcd for base unit with caller id features: 3.4 inch in 3 line display, hold, music on hold. mute, flash, headset jack, wall mountable ( charger ) handset ( power outage operation ) for base unit , speakerphone ( volume steps ) for base unit and cordless both, ni mh rechargeable battery talk time: up to 15 hours, standby time up to 7 days charge time about 7 hours, standby power consumption: 1.2 w , answering system for both line phone should be link to cell phone, minimum 2 no.should be supported , ring as cell mode, bluetooth headset capability, call blocking should support minimum 250 number of callers.talking caller caller id features for both headset and base unit. [ warranty period: 12 months after the date of delivery ] ...

Due Date : October 10, 2023

Tender Value : ₹ Ref. Documents

12

Central Railway - Maharashtra

39869523 supply of hydraulic jack cylinder, capacity 20 tonne made of alloy steel, outer dia 150mm, stroke 150mm, extended height 250 to 280 mm with test report, hoses, quick release couplers, base plate, dust caps and hand operated hydraulic pump sytem of suitable pressure as per firm?s recommendation of make vankos, classic hydraulic, makoya. [ warranty period: 30 months after the date of delivery ] ...

Due Date : October 18, 2023

Tender Value : ₹ Ref. Documents

13

Municipal Council - Maharashtra

39863922 tender for regarding verification of skilled/unskilled manpower as required for the year 2023 24 in municipal council office. 2 for the year 2023 24, repairing the entire pipe line supplying water to dhamangaon city with leakages, vols, electric pumps as well as waste material, pimpalkhuta jack well, old dhamangaon water purification center to operate 24 hours, also about water supply | regarding supply of manpower for carrying out other works....

Due Date : October 11, 2023

Tender Value : ₹ Ref. Documents

14

Indian Army - Maharashtra

39856979 bids are invited for lv7 stln x 7474500 fuel injection pump vp 37 ve distribut, lv7 stln b 3209301 road spring rear assy, total quantity : 29675lv7 stln x 7474500 fuel injection pump vp 37 ve distribut lv7 stln b 3209301 road spring rear assy lv7 stln a1581100 assy gear box lv7 stln 2540 72 0475416 towing hitch swivel assy lv7 stln 2990 72 0484279 ecu assy lv7 stln vf x 7453500 fuel inj pump nominal rated ve pump lv7 stln vf 2520 72 0466596 transmission mechanical vehicular lv7 stln vf 2520 72 0000500 propeller shaft lv7 stln vf b 8719301 s a of fly wheel 43 i 43 akl b6518538 suction hose 75mm 8m long 43 i 43 akl b6518536 hose del dia 38mm 30m long 43 i 43 akl b6518090 del hose 63mm 30m long lv7 itr beml 2510 000651 guide roller stand assy lv7 itr beml 651 21 2 alt 6 front suspension beam rh lv7 itr beml 50 6 top seal for spring front suspension lv7 itr beml 50 611 steering lock pin and chain assy lot 2 3 4 lv7 itr beml 5330 003675 seal plain b 115 x 150 x 12 lv7 itr beml 50 319 16 hose assy brk intervehicular 1800 lv7 itr beml 5310 004992 wheel nut rh nut cone seal hexagon rh lv7 itr beml 5310 004991 wheel nut lh nut cone s eal hexagaon lh lv7 itr beml 2510 000652 centre pivot bottom lv7 itr beml 50 66 51 pin lot 1 2 lv7 itr beml 4720 000415 hose assy rubber 900 long lot 2 to 4 lv7 itr beml 5340 012171 support block for jack lv7 itr beml 3110 003549 coller brg od 105 id 66 x thk 8 lv7 itr beml 50 223 1 cable 15 mtr 15 0 3 1 5mm 12 core lv7 t 815 442 987 420 224 coating lh...

Due Date : September 28, 2023

Tender Value : ₹ Ref. Documents

15

Home Department - Maharashtra

39852483 bids are invited for 1 anti riot hemet with grill 2 hydraulic jack 3 puller 4 reflective jacket 5 search light 6 light batton 7 cone 8 breath analyzer 9 electric cutter ( iron ) total quantity : 803...

Due Date : October 05, 2023

Tender Value : ₹ Ref. Documents

16

Central Railway - Maharashtra

39827075 supply of hydraulic lifting bottle jack, 30 t capacity. along with washer kit, jack height 265 mm, maximum height 430 mm and lifting height 150 mm weight 13 kg. make bemco hytech, power team or vankos & company or duff norton along with warranty cerficate. [ warranty period: 30 months after the date of delivery ] ...

Due Date : October 17, 2023

Tender Value : ₹ Ref. Documents

17

Central Railway - Maharashtra

39826358 supply installation & commissioning of journal jack similar to duff norton no.111 c 2 or bemco model 15 j 10, capacity minimum 15 ton, height 10 ( inch ) lift 5 ( inch ) , make bemco jacking system or similar. the supply should be with installation, commissioning and with calibration certificate. [ warranty period: 30 months after the date of delivery ] ...

Due Date : October 16, 2023

Tender Value : ₹ Ref. Documents

18

Zilla Parishad - Maharashtra

39788285 bids are invited for advanced stem lab 1 stem activitry kit levitation due to repulsion kit 2 stem activitry kit animal wheel 3 stem activitry kit toy telescope 4 stem activitry kit air powered car 5 stem activitry kit hand pump activity 6 stem activitry kit types of houses 7 stem activitry kit air powered car 8 stem activitry kit internal organs 9 stem activitry kit seed germination 10 stem activitry kit life cycle 11 stem activitry kit make your own bridge 12 stem activitry kit playing with pully system 13 stem activitry kit model of teeth 14 stem activitry kit earth tilted verticaly 23 degree 15 stem activitry kit wind power crane 16 stem activitry kit floating magnets in water 17 stem activitry kit magnetic spring 18 stem activitry kit sound and vibration ( flute ) 19 stem activitry kit water filter kit 20 stem activitry kit touch slate 21 stem activitry kit air gun 22 stem activitry kit human digestive system 23 stem activitry kit recycling of paper 24 stem activitry kit make your own compass 25 stem activitry kit sprinkler 26 stem activitry kit misscible & immiscible liquids 27 stem activitry kit volcano model 28 stem activitry kit bike rope 29 stem activitry kit bernoulli bag ( capacity lungs ) 30 stem activitry kit drip irrigation system 31 stem activitry kit fats, proteins and carbohydrates testing kit 32 stem activitry kit types of food we eat 33 stem activitry kit fun with sepration 34 stem activitry kit chromotography 35 stem activitry kit physical & chemical changes 36 stem activitry kit skeletal system magnetic 37 stem activitry kit bird the cage 38 stem activitry kit climbing butterfly 39 stem activitry kit properties of air kit 40 stem activitry kit kelidoscope making kit 41 stem activitry kit stethoscope 42 stem activitry kit acids bases and their properties 43 stem activitry kit budding crystal kit 44 stem activitry kit anemometer 45 stem activitry kit elephant toothpaste 46 stem activitry kit centrifuge crane 47 stem activitry kit respiratory system in humam beings 48 stem activitry kit osmosis activity 49 stem activitry kit make your own sundial 50 electromagnet screwdriver 51 stem activitry kit fire extinguisher 52 stem activitry kit rapid oxidation 53 stem activitry kit slime ball 54 stem activitry kit hovercraft 55 stem activitry kit frictionless propeller kit 56 stem activitry kit chemical reaction ( electroplating ) 57 stem activitry kit static electricty 58 stem activitry kit periscope 59 stem activitry kit phase the moon 60 stem activitry kit solar system 61 robotics kit 62 drone 63 wind generator model big 64 water turbine model 65 petrol engine 66 diesel engine 67 loop the loop 68 turbechut 69 sound dish 70 sundial clock 71 color dish 72 marble race 73 archemedes 74 energy conversion 75 solar system modelmotorised 76 phases of moon motorised 77 newtons colour 78 kaleidoscope 79 periscope 80 dynamo model 81 solar energy 82 multiple reflection 83 human torso 84 human brain 85 human eye 86 human ear 87 dental hygiene 88 human heart 89 digestive system 90 respiratory 91 functional lungs 92 human skeleton 93 animal cell 94 animal cell mitosis set 95 animal cell division meiosis 96 foetus development model 97 plant cell 98 human urinary system 99 floating fan 100 human skin section 101 compound microscope 102 permanent slides in box 103 specimens in glass jar 104 pin hole camera wooden 105 centrifugal kit 106 electromagnetic brake 107 wave motion hand operated 108 van de graff model 109 wimshersts machine 110 series and parallel wiring 111 anemometer digital 112 infinity well 113 pulley block 114 multi circuit board 115 multi activity on electricity and magnetism 116 faraday’s laws of electromagnetic induction kit 117 electromagnetic repulsion 118 white light formation 119 tornado model 120 periodic table 121 light & optics teacher kit 122 switch working model kit 123 conductors & insulators 124 persistence of visionexperiment 125 simple machines 126 variable resisitence graphite kit 127 magnetism from electricity 128 solenoid engine 129 hydraulic jack 130 magnetic brake 131 fidegt generator model 132 light demonstarting rgb 133 gear generator 134 gyroscope 135 floating globe 136 telescope 137 petrol engine model 138 diesel engine model 139 loop the loop 140 hand steadiness tester 141 v engine 142 solar eclipse 143 buldging of earth 144 3 in 1 solar conversion 145 radiometer 146 illusion ring 147 centrifugal kit set of 3 148 scientist portrait set of 5 149 charts set of 10 150 geometry box 151 hollow sphere 152 hollow cylinder 153 volume relationship set 154 wooden geomterical shapes 155 volume relation between cube & sphere 156 formation of tetrahedron 157 volume relation between cone & cylinder 158 x y axes co ordinate geoboard 159 transparent geoboard 160 isometric geoboard 161 flip n fraction geoboard with circle cuts 162 double sided geoboard 163 exterior angle of regular polygon 164 construction of parabola 165 angle property of cyclic quadrilateral 166 angle sum property of triangle 167 angle sum property of quadrilateral 168 3d colour solid set 10cm 169 mensuration cube 170 tangent geoboard 171 cylinder cuts in eight parts 172 power of 2 173 factorization tiles 174 symmetry kit 175 tangram plastic 176 fractions in shapes 177 ring of theorem 178 rain gauge 179 conic section 180 working model of pythagoras 181 ( a + b + c ) 2 182 ( a + b ) 3 183 ( a + b ) 2 − ( a − b ) 2 = 4ab 184 table for display & demonstration 185 stools metals 186 storage racks 187 wall shelves 188 tool kit with display 189 consumables andaccessories box 190 training manual 191 first aid box 192 student manual 193 floor mat 194 electrification 195 beutification ( q3 ) total quantity : 4...

Due Date : October 06, 2023

Tender Value : ₹ Ref. Documents

19

Department of School Education - Maharashtra

39763611 bids are invited for package no 4 atal tinkering lab of niti aayog power supply and accessories and safety equipment ( q3 ) , package no. 3 atal tinkering lab of niti aayog mechanical, electrical and measurement tools ( q3 ) , package no. 2 atal tinkering lab of niti aayog rapid prototyping tools ( q3 ) , package no. 1 atal tinkering lab of niti aayog electronics development, robotics, internet of things and sensors ( q3 ) glue sticks , nuts and bolts and screw, cable tie, sand paper, power strip adaptors, bulb holders , electric wires, usb to bc jack cable etc hacksaw frame , hacksaw blades, mini hacksaw blades, pliers 4.5 inch size, tweezer set , ball pein hammer, c clamp, drilling machine set, drilling workstation etc 3 d printer kit and tools, dedicated ups / power back up, filament storage box, , set of arts and crafts accessories e.g stationery item and basic prototyping material total quantity : 4...

Due Date : September 30, 2023

Tender Value : ₹ Ref. Documents

20

Department Of Science And Technology - Maharashtra

39750097 bids are invited for network revamping 24 port distribution l2 managed switch with 2 ofc port , transceiver module lge with sfp , wifi controller with four no of access points , poe switch 4 plus 4 port giga , cat 6 utp cable roll with 305m , 24 port cat 6 utp jack panel manager , single information outlet with smb having shutter facility , cat6 utp patch cord 1 m , cat6 utp patch cord 2 m , 6 core single mode cable , duplex fibre patch cord single mode 2 mtr , 19 inch 12u 530 mm depth with pou , 19 inch 8u 530 mm depth with pou , ofc coupler , ofc pig tail 2 mtrs , fibre terminal box , rj 45 connectors , fiber to ethernet media converter , 1 inch pvc cassing capon with accessories , 2 inch pvc cassing capon with accessories , 100 mm pvc box type casing patti with cover , 20 mm conduit pipe , power switch fifteen amp , gang box for one switchsocket , one and half mm cable for power connections , integration charges for passive componets , laying of 6 core multimode outdoor fiver cable , splicing of ofc cable , warranty support back to back for five years total quantity : 2592...

Due Date : September 30, 2023

Tender Value : ₹ Ref. Documents

21

Ministry Of Defence - Maharashtra

39724310 bids are invited for custom bid for services scope of work for hiring of 50 ton hydraulic mobile crane for loading/unloading including sling and lifting accessories for loading/unloading of heavy weapon stores i.e. weapon system/ equipment/ spares at wed(mankhurd) technical specification of 50t mobile crane. (a) capacity 50 ton (b) boom length minimum 20 mtr (c) road speed 26 km/hr or more (d) drive 4x4 wheel with 4 wheel steer boom angle 3 to 780 360 continuous rotation (f) slew system slew speed min 2.0 rrm geox (h) (d) lmi or sli required operational at all time outriggers four outriggers ofuel stage beams with jack (k) brakes a) service brakes on a wheels (m) steering system ...

Due Date : September 20, 2023

Tender Value : ₹ Ref. Documents

22

Department of Defence Production - Maharashtra

39708379 bids are invited for hardness test block hardness test block hra 70 , hardness test block hrc 35 , hardness test block hrc 45 , hardness test block bhn 450 , hardness test block bhn 300 , hardness test block 65 hr30n , stepper diamond cone indenter 4 mm , stepper diamond cone indenter 6 mm , screw jack support , brinell microscope analogue total quantity : 71...

Due Date : September 20, 2023

Tender Value : ₹ Ref. Documents

23

Indian Air Force - Maharashtra

39707434 bids are invited for professional painting service painting of ladder folding; na; aircrafts , professional painting service painting of ladder servicing big; na; aircrafts , professional painting service painting of ladder for 1st cabin enterence; na; aircrafts , professional painting service painting of wheel chocks rolling block; na; aircrafts , professional painting service painting of tow cable hauling rope with drum; na; aircrafts , professional painting service painting of ladder providing access to nose wheel well; na; aircrafts , professional painting service painting of refuelling and hydraulic system panel; na; aircrafts , professional painting service painting of multi purpose transport bogie; na; aircrafts , professional painting service painting of towing carrier; na; na , professional painting service painting of ladder h 435 800; na; aircrafts , professional painting service painting of hydraulic refilling trolley; na; aircrafts , professional painting service painting of hydraulic jack main; na; aircrafts , professional painting service painting of transporting trolley; na; aircrafts , professional painting service painting of device for removing busbar; na; aircrafts total quantity :...

Due Date : September 27, 2023

Tender Value : ₹ Ref. Documents

24

Municipal Corporation - Maharashtra

39687896 tender for items of work a) lift & escalator sitc of electric traction passenger cum stretcher lift with · doors type : copo/topo doors with frame made from ss 441 grade solid (non cladded) sheet of 1.5mm thick in hairline finish for car and all landing doors with ss door architraves/frames the lift doors shall have minimum 1 hour fire rating (with submission of necessary valid test certificate issued by nabl accredited or independent test laboratory).· lift car enclosure made from ss 441 grade solid (non cladded) sheet of 1.5mm, thick with hairline finish with frame made from ms girders, bracing of adequate size with minimum safety factor of 5, with toe guard apron, with necessary false ceiling with adequate led lights, blower/fan for ventilation & ss chequered plate flooring, handrails, mirror, emergency light etc. the lift car interior design shall be done as per the directions of engineer in charge.· cop with ss face plate having metallic push buttons with braille code & luminous indicator around button with fpi, scrolling up/dn led indicator & with / without attendant key switch, owd with audio visual alarm, vas in marathi, hindi & english with intercom system with telephone instrument in lift car, lmr & fcc/ground floor. · lop with ss face plate having recess/surface push button box for all landings with scrolling up/dn led indicator having metallic push buttons with braille code & luminous indicator around button with cpi, lift car arrival & next travel direction audio visual indication at all landings. lift controller of simplex full collective based on microprocessor/ plc with vvvf drive having closed loop control system, with ibms compatible having necessary port. the controller shall have necessary protections such as overcurrent, overvoltage, over speed, overheat for all devices including lift motor and travel direction protection, protection for phase loss at input or output etc. ,various operation modes such as maintenance, change direction by attendant, full load bypass, vip call operation, self levelling operation, call cancel facility, auto return to home landing, fireman evacuation operation, earthquake operation, door open/close operation from cop etc. the system can record information for minimum 30 latest faults, with real time clock management and handheld keypad with lcd screen for view and setting of parameters, the control panel duly wired with proper size & strength, copper wire for power & control circuit, with provision for addition of floor/control card & allied accessories control panel having enclosure of 1.5mm crca sheet with powder coating with ip54 protection class. · ard complete with necessary smf vrla batteries.· fireman controller having fireman switch at fire landing. · cctv surveillance system comprises of 2nos minimum 2.0mp fhd ip based vandal proof dome camera in lift car & in lmr/inside lift shaft top aimed on lift machinery & controller with nvr kept in lmr/fcc with hdr data backup for min. 90 days with min. 20 fhd tv monitor, to be kept in fcc/lmr as directed by engineer in charge.· lift machine of gearless pmsm of suitable kw with duty cycle of minimum 120 starts/hr (with submission of necessary valid test certificate issued by nabl accredited or independent test laboratory), with traction pulley, osg, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on lmr floor/ shaft walls complete with main/diverter traction sheaves, suspension wire ropes/belts of adequate size & strength.· other mechanical parts such as t section adequate size guide rails for car & counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, ms pit ladder etc. erected with necessary steel work.· minor civil work such as alteration work if any necessary for erection of landing door frames and its accessories e.g. sill, header, hole pass etc complete with plaster finish, civil work for erection buffers, erection of lift machinery, adequate size core cuts if required & scaffolding for erecting guide rails, providing and fixing steel girders/rcc work having adequate strength for mounting and hoisting lift machine etc. complete as per specification no. lft.· general: job includes entire procedure of obtaining all necessary erection permissions & license to work the lift from electrical inspector(lifts) with submission to the engineer in charge.· the above rate includes fully comprehensive amc for one year from the date of commissioning. sitc of electric traction passenger cum stretcher lift with · rated capacity : 13 passenger/ 884kg · floors : b+g+21 floor (23 stops/23 landings) · travel : 84.5mtrs · location of lift machine: mr/mrl· rated speed : 2.5 mps vs· car/landing door clear opening of 1100/1200 mm wide x 2000 mm high· clear car size of 2200mm wide x 2500mm deep x 2250mm high · lift shaft available having clear size of 2675 mm wide x 1725 mm deep, ......mm pit depth 4950 mm overhead. job b) sitc of electric traction passenger cum stretcher lift with · rated capacity : 13 passenger/ 884kg · floors : b+g+16 floor (18 stops/18 landings) · travel : 76.5mtrs · location of lift machine: mr/mrl· rated speed : 2.5mps vs· car/landing door clear opening of 1100/1200 mm wide x 2000 mm high· clear car size of 2200mm wide x 2500mm deep x 2250mm high · lift shaft available having clear size of 2625 mm wide x 1725 m deep, 4950 mm pit depth, 4950 mm overhead. job c) sitc of electric traction passenger cum stretcher/hospital lift with · rated capacity : 13 passenger/ 884kg · floors : b+g+1 floor (4 stops/4 landings) · travel : 9.5mtrs · location of lift machine: mr/mrl· rated speed : 1.5mps vs· car/landing door clear opening of 1100/1200 mm wide x 2000 mm high· clear car size of 2200mm wide x 2500mm deep x 2250mm high · lift shaft available having clear size of 2500 mm wide x 1700 mm deep, 4550 mm pit depth, ………mm overhead. job 2 supply, installation, testing & commissioning of escalator 6.5 m rise fully ss finish with inclination 30/ 35 degrees, step width of 600 to 1000 mm, and speed of 0.5 to 0.65 m/s, self supporting handrails centred on glass panels. only government officers will be allowed for material inspection prior to approval. test report for inspected material will be provided. one year product warranty can be extended as per requirement. public flow of 6000 to 8000 passengers per hour. 18kn/step load carrying capacity. b) mechanical stack parking 1 supply, installation, testing & commissioning of 2 wheeler stack parkingoperation : hold to run spring operated key switch operationsafety: electromagnetic locks, emergency stop switch1. hydraulic stack park 2. independent single stack park 1. lockers on both the sides in a descending direction2. emergency stop switch.3. hold to run spring operated key switch4. centre support holding the side columns and side beams with 3u combination.5. ip 55 protection for electrical material.6. drive through protection cover over hydraulic pipe and electrical cables.7. non return valve8. galvanised protection cover for balancing chain and electro magnet.9. special profile for entry plate for better grip of tyres while driving over the platform.10. power pack with submerged motor and self company make control panel.11. hydraulic cylinder – two stage single acting, single stroke cylinder12.safty device solenoid operated mechanical lock arrangement13.maximum load capacity of the system – 500 kg14. connect power for power pack in amps 1.1 kw each 2 supply, installation, testing & commissioning of 4 wheeler stack parkingoperation: hold to run spring operated key switch operationsafety: lockers on every 100 mm, emergency stop switch1. lockers on both the sides in a descending direction2. emergency stop switch.3. hold to run spring operated key switch4. centre support holding the side columns and side beams with 3u combination.5. ip 55 protection for electrical material.6. drive through protection cover over hydraulic pipe and electrical cables.7. non return valve8. galvanised protection cover for balancing chain and electro magnet.9. special profile for entry plate for better grip of tyres while driving over the platform.10. power pack with submerged motor. 11.model hydraulic stack 210 12. quantity 1 system – 2/3 car13. length 5000 mm 14. standard width 2000 mm & standard height 2000 mm 15. standard weight 2000 kg 16. vertical drive unit type hydraulic cylinder & chain type motor 3 hp / 2.2 kw, 415vac, 50hz speed 4 m/ min drive hydraulic cylinder & chain type 17. power source main ac 415v, 3 ph, 50 hz lighting ac 220v, 1 ph, 50 hz 18. operating box 3 way encloser box with up, down & key switch19. control relay logic20. safety devices key selector switch to stop the system mechanical locking arrangment21. finishing powder coated c) swimming pool 1 sitc of magiline swimming pool liner filter job16.15m x 6.65m x 1.8m (depth)for this swimming pool filter specification as bellow pipless filtration unit nfx 30, discharge 30 cum/hr, boosting for automatic cleaning robot at 2 cum/hr & suction 32 cum/hr. 30,000 lit per hour capacity avg time of running 2.5 to 3 hours motor capacity 2 hppool materials, included: pvc liner – plain blue (tiles not required) filtration units pool wall lights programming electric box maintenance accessories kit start up chemical products 3 steps ss ladder d) fire fighting 1 supplying, installation, testing and commissioning of main fire pump (mfp/ep) suitable for water discharge of 2850 lpm at 110 m head and 165 m head driven by electric motor 415 volts, 3 phase 50 hz, ac supply of 112 kw or of suitable kw capacity for manual/automatic operation and consisting of following:(a) horizontal type, single/multi stage, centrifugal/split casing pump of cast iron body & bronze impeller with stainless steel shaft(ss410 grade), mechanical seal conforming to is 1520.(b) squirrel cage induction motor, tefc, synchronous speed 3000 rpm, suitable for operation with ip 55 protection for enclosure, horizontal foot mounted type with class f insulation, conforming to is 325.(c) m.s. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required.(d) erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (isc code 536 as per is 2932 of 2003) complete, as per specification no. ff mfp/ssc/msc/ep. rate shall include dlp of 2 years against commissioning of the project. each 2 supplying, installation, testing and commissioning of jockey fire pump (jp) suitable for water discharge of 180 lpm at 110 m head and 165 m head driven by electric motor 415 volts, 3 phase 50 hz, ac supply of 15 kw or of suitable kw capacity for manual/automatic operation and consisting of following :(a) horizontal/vertical type, multi stage, centrifugal casing pump of cast iron body & bronze impeller with stainless steel shaft(ss410 grade), mechanical seal conforming to is 1520.(b) suitable kw squirrel cage induction motor, tefc, synchronous speed 3000 rpm, suitable for operation on 415 volts, 3 phase 50 hz, ac supply with ip 55 protection for enclosure, horizontal foot mounted type with class f insulation, conforming to is 325.(c) m.s. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required.(d) erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (isc code 536 as per is 2932 of 2003)complete, as per specification no. ff mfp/jp. rate shall include dlp of 2 years against commissioning of the project. each 3 supply, installation , testing & commissioning of diesel engine driven main pump of horizontal centrifugal multi stage pump suitable for water discharge of 2850 lpm at 110 m head and 165 m head confirming to is 5120 1977. the pump shall be coupled to suitable hp diesel engine heat exchanger type with speed of 1800 /1500 rpm and complete set shall be mounted on commom base frame . batteries & battery leads with stand, diesel tank 500 ltr with stand & he piping, fuel piping with valves. coupling guard, silencer, 24 v starting arrangement, oil level indicator & oil coolant and other standard accessories, and foundation bolts , etc. complete. the heat insulation with al cladding for silencer line up to 60 mtr included in the installation the pump shall be capable of giving not less than 150% discharge at a head not less than 65% of the rated head. the shut off head should not be more than 120% of rated head. rate shall include dlp of 2 years against commissioning of the project. each 4 supplying and erecting g.i. pipe ‘c’ class erw 250 mm dia with necessary fittings complete as per specification no. ff pp mtr 5 supplying and erecting g.i. pipe ‘c’ class erw 300 mm dia with necessary fittings complete as per specification no. ff pp mtr 6 supplying and erecting 250 mm dia. cast iron double flange rising stem sluice valve complete with pn25 pressure rating, as per specification no. ff vl/sv nos 7 supplying and erecting 300 mm dia. cast iron double flange rising stem sluice valve complete with pn25 pressure rating, as per specification no. ff vl/sv 8 sitc of abc type extinguisher 6kgs. is 15683 each 9 sitc at approved location approved make fire buckets of 24 gauge galvanized steel sheet, standard 9 litre capacity and of round bottom shape, painted white inside and red outside and black on the bottom, inscribed with letters “fire” in black and gold. cost shall be inclusive of providing ms stand duly painted over a coat of primer. bucket shall be fabricated with stand to install 4 nos of buckets. set 10 providing and fixing forged brass ball valve with ss ball suitable for test pressure of not less than 30 kg / sq.cm of the following size : 25 nb each 11 providing & fixing of installation control valve with turbine type automatic alarm gong to be connected with control valve, drain & test valve and all other necessary components as per manufacturers specifications complete as required. (consider 2 nos . isolation valve for each alarm gong) 150 nb size each 12 supply and installation of flexible braided hose pipe of 25mm dia with both end socket for fixing the sprinkler to ranger.consider length of flexible piece as per below. flexible connectors should be supported with separate expansion bolts & not on the false ceiling frame work. the pressure carrying capacity of hose shall be 12 bar. the supporting arrangement to get approved from ceiling vendor prior to execution. 1500 mm long each 13 supply, installation, testing & commissioning of en 54 certified digital evac pa controller with built in audio message generator (multi message), capable of adding 12 zones in the system and expandable upto 400 zones with 14x 4 audio matrix withaudio matrix with full dsp functionality. 8 audio inputs, 4 audio outputs, 4 channel output matrix. amplifier redundany, 4 x 100v audio inputs and built in 8 zone speaker line outputs. 8000 fault, warning and event conditions log. built in message manager for 100 emergency/business calls up to 85 minutes. should be able to send 2 different pre recorded messages simultaneously (message should be in 2 languages english & hindi). shall be able to handle up to 2000watt load, 10 routers, 6 call stations, 128 speaker zones. the controller should integrates multiple functions such as audio storage, playback, zone control, audio monitoring, scheduled broadcast and fault diagnosis, audio playing, zone control, fault monitoring, log recording, volume control and amplifier switchover etc. complete with cords, connectors, power supply & required accessories. note system should operates in two channel operation & fulfill the fas cause & effect matrix requirements. each 14 supplying, erecting, testing and commissioning 1000 w amplifier suitable to operate on 230 volts a.c. / 12 volts d.c. supply complete as per specification no. ff pa/afr each 15 novec 1230 tube based gas suppression system main electrical panelssitc of fk 5 1 12 (fluoroketone) clean agent direct low pressure (dlp) pre engineered panel gas suppression system, gas shall be zero odp and gwp less than 1., agent shall be ul listed, the system shall be designed accordance to nfpa 2001 (latest edition), the clean agent is stored peso approved cylinder as compressed liquid, super pressurized with dry nitrogen to 13.5 bar to 16 bar. cylinder shall be equipped with dlp valve, pressure switch(ce/ul marked) and pressure gauge need to be integrated on dlp valve itself to monitor the cylinder pressure. ul listed detection tube shall be manufactured from specially processed polymer material to achieve the desired heat detection and delivery characteristics., and shall cover and routed to each compartment of panel, end line adapter to be placed at the termination point of detection tube for charging the nitrogen., pressure switch should be integrated with master control unit for audio visual alarm in the even of fire & system discharge. master control unit should have provision to interface system with main control fire alarm system and bms. clean agent total flooding system server rooms1. sitc of clean agent novec gas /naf 227 gas suppression system consisting of seamless cylinders of 80,120 & 140 litre each and each filled with clean agent novec gas / naf 227 gas pressurised to 25 bar pressure complete with common pipe manifold of seamless pipe, pilot cyinder, electric actuator, relief valve, pressure guages, high pressure rubber hose, high velocity nozzles, brackets, floor mounting assembly consisting of ms angle boxing. contractor to provide all necessary certificates of approval of cylinder from cce, and certificate of filling to required pressure and weight.2. sitc of complete with socketweld fittings and supports astm schedule 80 seamless pipes.3. sitc addressable fire alarm cum gas release panel complete with cross zoning and 4 zone gas discharge cards with complete with power card, 15 ah smf battery, digital ammeter, each gas zone complete with isolate, abort switch, discharge switch, timer knob, evacuation alert, gas discharge and complete with relay for actuation of gas solenoid valve. job 17 clean agent suppression system kitchen area1. sitc, of commercial kitchen system light weight stainless steel body f/k agent (wetchemical) required capacity, filled with f/k agent, electrical actuated valve assembly and necessary fitting, cylinder brackets with screw & cabinet, stainless steel fitting joints, elbow, reducers etc, ss piping and fiting, nozzles with required velocity, sensor cable, manual release, kitchen suppression panel, 2 zone, hooter cum strobe, abort switch, gas shut off valve (size 1), with fitings all pipe etc, cables and accessories include all other requuired accessories e electrical ht items 1 sitc of 22kv gis breaker at 220/22kv hinjewadi ph 1 s/s as per msetcl specification rated voltage 24kv, rated power frequency withstand voltage 50hz, rated lightning impulse withstand voltage 125kv, rated busbar current 1600amp, rated peak withstand current 124 ka, rated short time current 3 sec, internal arc classification 40ka 1sec. nos 2 sitc of 22 kv heat shrink indoor touch proof termination (aj)kit for xlpe 3 c x 400 sq.mm. kit 3 sitc of 22kv heat shrink straight through joint, (aj) kit for xlpe 3 c x 400 sq.mm. kit 4 sitc of xlpe 22kv ht, 3c,xlpe cable 400 sq.mm.cable (round armourd) with cable route marker, cable laid over rcc cable trench / directly buried / cable tray or as per msedcl approved cable laying arrangement from 220/22kv ehv sub station. hinjewadi, two feeders with three run cable mtr 5 sitc of advance maintenance free earthing system consisting of 80 mm diameter x 3 meter long, made from low carbon steel pipe, galvanised with 2 nos of stainless steel nut & bolt, suitable for lug size 50 mm x 6 mm x 100 mm, and cross section area 616 mm2, along with 50 kgs. of premium ground improving compound duly modified premium quality for excellent electrical conductivity of approved make. during earth pit boring/drilling, if the water logging or water seepage in the earth pit (due to high ground water level). however, the earth pit gets moist / sludgy. in such cases, use carbon based chemical compounds. nos 6 excavation permission charges for 22kv ht, 3c,xlpe cable 400 sq.mm.cable (round armourd) with cable route marker, from 220/22kv ehv sub station. hinjewadi, two feeders with three run cable including obtaining necessary road cutting permission from pcmc/ pmrda / midc mtr 7 sitc of 22kv indoor vcb panel with incomer feeder for 22 kv 1600 amps 25ka/1 sec vaccum circuit breker with c& r panel with o/c + e/f realy, spring charging motor 230v ac, draw out & isolation horizontal, ct ratio 400/5amp, protection relay triple pole idmlt relay with rs 485comm. port with trip circuit supervision 3 o / c + 1 e / f with high set o / c setting : 20 % 200 % of 5a., e / f setting: 10 % 40% of 5a, with high set for both o/c & e/f aux. vtg 110v dc, type : rej601/p154 or as per msedcl/msetcl approval spec. nos 8 sitc of 22kv indoor vcb panel bus coupler for 22 kv 1600 amps 25ka/1 sec vaccum circuit breker with c& r panel with o/c + e/f realy, spring charging motor 230v ac, draw out & isolation horizontal, ct ratio 400/5amp, protection relay triple pole idmlt relay with rs 485comm. port with trip circuit supervision 3 o / c + 1 e / f with high set o / c setting : 20 % 200 % of 5a., e / f setting: 10 % 40% of 5a, with high set for both o/c & e/f aux. vtg 110v dc, type : rej601/p154 or as per msedcl /msetcl approval spec. nos 9 sitc of outgoing feeder with differential protection relay with indoor panel 22kv i,1250amp, 26.3 ka, vaccume circuit breaker with c & r panel with differential protection relay,tripping & closing coil 110v dc, spring charging motor 230v ac.draw out & isolation horizontal aux contact 4 no + 4 nc, protection relay triple pole idmlt relay with rs 485comm. port with trip circuit supervision 3 o / c + 1 e / f with high set o / c setting : 20 % 200 % of 5a., e / f setting: 10 % 40% of 5a, with high set for both o/c & e/f aux. vtg 110v dc, type : rej601/p154 or as per msedcl/msetcl approval spec. nos 10 sitc of 22 kv heat shrink indoor touch proof termination (aj)kit for xlpe 3 c x 300 sq.mm. kit 11 sitc of 22/0.433kv 160 amp switch fuse unit (sfu) of the following rating including necessary accessories like enclosure, fuse base ,fuse links etc. and requirement of the item with the supply authority (msedcl) for station transformer protection 12 sitc of 22 kv h.t. metering cubical (compact outdoor type) licensee approved fabricated with 2mm.(14 swg) m.s.sheets with supporting angle and channel, painted with powder coating or epoxy paint shade light grey, copper bus bar electronic security lock and mechanical lock, with counter meter for measuring no of times the opening of doors, top side cover ( c.t.p.t cover) interlock with meter doors, epoxy coated 3 nos c.t having required ratio between 5/5a to 300/5a burden 10 va class 0.2 epoxy terminal block suitable for provided tri vector meter, and provision for incoming and outgoing cables etc complete duly tested by licensee and with necessary test certificates and erected on the provided plinth. (ref sld a+b metering kiosk section) nos 13 sitc of outgoing feeder with differential protection relay with indoor panel 22kv i,1250amp, 26.3 ka, vaccume circuit breaker with c & r panel with differential protection relay as per msedcl/msetcl approved specs( 1 in 1out) nos 14 sitc of outgoing feeder with differential protection relay with indoor panel 22kv i,1250amp, 26.3 ka, vaccume circuit breaker with c & r panel with differential protection relay as per msedcl/msetcl approved specs( 1 in 5out) f) transformer 1 sitc of 3 phase, 22/0.433 kv, 50 hz., 2500 kva, 22/0.415 kv oil( easter) type transformer with nitrogen filled and naturally cooled outdoor type, copper wound non sealed transformer, delta/star connected with additional neutral brought out on load side, temperature rise should not exceed 45℃ by thermometer in oil and 50℃ by the resistance method in winding at full load rating, using type a winding insulation (kraft paper), with hv tapping (with on load tap changer) on load +5 to 15 in steps of 2.5%, with standard accessories complete with test certificate with losses below 2930 watts at 50% load, 8085 watts at 100% load as per is:1180 (part 1) : 2014 with necessary permissions of electrical inspector, as per specification no ss tr nsl. as per msedcl approval g) electrical lt/ht panels & system 1 sitc of pcc panel (refer sld dwg main pcc panel block a+b ) busbar: 6300a, 4 pole, 50ka aluminium bus bars with colour coded heat shrinkable insulating sleeves. incomer: 2500a, 4 pole mccb, 50ka 10 nos. protection and measurement as per specification.metering :one set of incomer phase indicating lights, shall be protected by 2 amps mcb’s. 1 nos. with ethernet module with rs485 for atys (modbus gateway compatible for bms system) nos 2 sitc of floor meter panel with 630a ats , duel source meter & 630amp mccb r458t compatible to bms at electrical shaft (refer sld floor meter panel)with ethernet module with rs485 for atys(modbus gateway compatible for bms system) (rs485 msdbus communication for atys p) nos 3 supplying, erecting, testing and commissioning isolator panel with 4000amp fp acb fabricated with 2mm.(14 swg) m.s.sheets with supporting angle and channel, painted with powder coating or epoxy paint shade light grey, alu bus bar size in electrical shaft (refer sld end feed boxl)with ethernet module with rs485 for atys (modbus gateway compatible for bms system) nos 4 sitc of 200 kvar rtpfc panel with incomer:500a,tp mccb 36 ka with spreader, ex roh, and auxiliary block with lsig , indication lamp r,yb ,on, current transformer 1600/5a , 12tage apfc relay 230v, 15 kvar x 2 , 10 kvar x 1 ,5 kvar x 2 , 25 kvar x 1 fixed type ,al busbar 60 x = 1500amp, with ethernet module with rs485 for atys (modbus gateway compatible for bms system) nos 5 sitc of 100 kvar rtpfc panel with incomer:250a,tp mccb 36 ka with spreader, ex roh, and auxiliary block with lsig , indication lamp r,yb ,on, current transformer 1600/5a , 10tage apfc relay 230v, 25 kvar x 2 ,15 kvar x 1, 10 kvar x 2 ,5 kvar x 2,al busbar 60 x = 1500amp, with ethernet module with rs485 for atys (modbus gateway ) nos 6 sitc of 22kv indoor vcb panel with incomer feeder for 22 kv 1600 amps 26.3 ka vaccum circuit breker with c& r panel with o/c + e/f realy as per msedcl approval spec. ( 1 in 2out) nos 7 sitc of outgoing feeder with differential protection relay with indoor panel 22kv i,1250amp, 26.3 ka, vaccume circuit breaker with c & r panel with differential protection relay as per msedcl approved specs( 1 in 2out) nos 8 sitc of pcc panel for pmpml (ref sld pcc panel for pmpl) panel shall be powder coated fabrication, body 2 mm ,door & load bearing 2mm with base mounting.indoor type .colour simens grey rl7032 . 7 tank process .incoming acb 4000 a 4p 50 ka with microprocessor release lsig with bodbus communication mccb 125a tpp 36ka for spd al busbar 2500 160 x 12 = current density with ethernet module with rs485 for atys (modbus gateway compatible for bms system) nos 9 sitc of battery charging distribution panel unit (ref sld pmpl battery charging distribution panel 1 2) busbar: 4000a, 4 pole, 50ka aluminium bus bars with colour coded heat shrinkable insulating sleeves. incomer: 4000a, 4 pole acb, outgoing: 400a mccb 14 nos &630a mccb with ats 1 nos. protection and measurement as per specification.metering:one set of incomer phase indicating lights, shall be protected by 2 amps mcb’s. 1 nos with ethernet module with rs485 for atys (modbus gateway compatible for bms system) nos 10 sitc of single phase, 240v, common service panel up to the max load of 140kw, powder coated crca 14 swg sheet, outdoor type, having ip54,ik10 protection, with incomer 320amp 4fpmccb, outgoing 63amp 4 pole mcb with mfm, indicator lamps, control wiring, metering device, etc. for automatic operation & overcurrent, short circuit, earth fault protection on provided iron frame / cc foundation with ethernet module with rs485 for atys (modbus gateway compatible for bms system) 11 sitc of single phase, 240v, common service panel up to the max load of 378kw, powder coated crca 14 swg sheet, outdoor type, having ip54,ik10 protection, with incomer 800amp 4fpmccb, outgoing 63amp 4 pole mcb with mfm, indicator lamps, control wiring, metering device, etc. for automatic operation & overcurrent, short circuit, earth fault protection on provided iron frame / cc foundation with ethernet module with rs485 for atys (modbus gateway compatible for bms system) h) dg set, synchronising panel & etc. 1 1600 kw / 2000 kva, diesel generating set prime rated comprising of: “cummins” model qsk60 g4, radiator cooled, diesel engine developing 2319 bhp at 1500 rpm, complete with standard accessories. coupled to “stamford” alternator rated at 1600 kw / 2000 kva at 415v, mounted on channel iron base frame complete and 02 no 12 v batteries.controller pc3.3 with fuel tank 990 ltrs capacity (supplied loose, located outside canopy)standard alternator is class h to temp rise limited to h @40deg c ambient.factory testing as per pl std qap for 3hrs.with acoustic enclosure with alternator mounted isolator panel with manually fix type acb as per powerica standard design.(breaker make – l&t/ schneider/reputed) with including dg fuel system ,dg exhaust system including with all necessary stack, heat insulation with required density and alu cladding as per norms approx 90mtr,piping etc. required accessories job 2 sitc of amf cum synchronising panel for 5x2000kva dg set as per powerica standard design as per is8623. incomer acb 3200a, 3p, 50ka, o/l, s/c release – 5nos kwh meter 5nos ef relay 5nos load manager conserv em6400 5nos battery charger smps based enko make 5nos buscoupler acb 6300a, 3p, 50ka, o/l, s/c release – 1no plc for ldss allenbradly make 1no indoor type panel ip52 busbar aluminium 6000a tpn 50ka breaker make schneider nw /l&t u power protection & safties in dg controller shall not be duplicated in panel. common outgoing breaker not offered/ not under powerica scope.with ethernet module with rs485 for atys (modbus gateway compatible for bms system) nos 3 sitc of hsd transfer gear pumps capable of delivering 250lph diesel at a head of 15m. pump is coupled with 3 hp, 3 phase, 415v 50hz flame proof motor. pump motor set mounted on common base frame. including m.s. class ‘b’ (heavy duty) pipes, including fittings like bends and required all necessary accessories ( for supply line) nos 4 sitc of hsd transfer gear pumps capable of delivering 110lph diesel at a head of 10m. pump is coupled with 1.5 hp, 3 phase, 415v 50hz flame proof motor. pump motor set mounted on common base frame.including fittings like bends and required all necessary accessories ( this is to transfer overflowed diesel back to underground tank.) nos 5 peso approval for 30 kl ug tank which includes, obtaining required local nocs, approvals from all local statutory bodies to receive final peso approval. ( statutory fees to be borned by customer, also the required documents to be submit by customer as and when required to obtained the peso aprroval i) bustrunking & accessories 1 providing & erecting hot dipped galvanised for ladder type cable tray with cover manufactured from 14 swg (2 mm thick) gi sheet of 1500 mm width & 75 mm height complete with necessary hardware mtr 2 supply of make 4000a,(sba 230n2) 4p, 415v sandwich aluminium bustrunking with suitable external alu earthing straight length – indoor ( ip 55 ) mtr 3 supply of 3200a,(sba 175n2) 4p, 415v sandwich aluminium bustrunking with 2 runs of suitable external alu earthing indoor (ip 55 ) mtr 4 supply of 2000a,(sba 175n2) 4p, 415v sandwich aluminium bustrunking with 2 runs of suitable external alu earthing indoor (ip 55 ) mtr 5 supply of 4000a,(sba 230n2) 4p, 415v sandwich aluminium bustrunking with suitable external alu earthing straight length – indoor ( ip 66 ) mtr 6 supply & installation of adaptor box for trasformer/ panel end for aluminium bustrunking nos 7 supply & installation of 3200a phase crossover for aluminium bustrunking nos 8 supply & installation of 4000a,(sba 175n2) 4p, 415v flanged end for aluminium bustrunking nos 9 supply & installation of 3200a,(sba 175n2) 4p, 415v flanged end for aluminium bustrunking nos 10 supply & installation of 2000a,(sba 175n2) 4p, 415v flanged end for aluminium bustrunking nos 11 supply & installation of rubber bellow for aluminium bustrunking nos 12 supply & installation of flexible link for aluminium bustrunking nos 13 supply & installation of 4000a vertical elbow for aluminium bustrunking nos 14 supply & installation of 3200a vertical elbow for aluminium bustrunking nos 15 supply & installation of 2000a vertical elbow for aluminium bustrunking nos 16 supply & installation of end cover for aluminium bustrunking nos 17 supply & installation of end feed box with isolator mccb for aluminium bustrunking nos 18 supply & installation of 630amp tap off box for aluminium bustrunking j) ev charging 1 sitc of 25 nos. 160 kw dc ev chargers (50 nos. pmpml buses. ) double gun charger (rated power: 160kw/ input voltage: 415v ac/ electrical protection: o/c, s/c, spd, isolation, ef, /user authorization: qr code/ communication protocol: ocpp v1.6 j.) nos 2 sitc of 600 nos. 3.3 kw ac 2 wheeler charging points charger (rated output current: 16amp, input voltage: 220v, electrical protection: over current, short circuit, isolation, user authorization: qr code, network connectivity: gsm/ gprs, place of installation: indoor and outdoor, installation: wall mounted.) nos 3 sitc of 175 nos. 7.4 kw ac 4 wheeler charging points charger (rated output current: 32a, input voltage: 220v, electrical protection: over current, over/under voltage, surge protection, short circuit protection, earth leakage, ground fault, user authorization: qr code, network connectivity: gsm/ gprs, place of installation: indoor and outdoor, ingress protection: ip 55, charging mode standard: iec 61851 1 charging mode 3. k) façade lighthing 1 sitc of led rgb/rgbw floodlighting luminaire for facade lighting with die cast aluminium housing, powder coated finish . the beam angle of the fitting shall be narrow, medium, wide or asymmetric as per the requirement. luminaire shall be complete with a driver and capable of operating at line voltage without any separate power supply from 100 270 v ac, 50 hz with power factor > 0.9. the fixture shall be suitable to operate at an ambient temperature range of 10°c to +50°c and shall be ip 65 and ik 06 rated.lifetime shall be at least l70:50000 burning hours at 50°c. luminaire shall conform to bis (is 10322) and shall be complete with all necessary accessories required for the proper working of the fixture including weatherproof connection cables, waterproof connectors etc. as required. make phillips, lighting technology, wipro, syska, jaguar, crompton, wipro, bajaj, havells, osram, orient.facade area 14500 sq.mt, perimeter of building 320 mtr, height of the building 88.50 mtr. l) pumping system 1 sitc of ss vertical inline pump with positive suction. each pump shall have three phase electric motor of s1 duty. the pump shall have cast iron head, base plate ss shaft / impeller / intermediate chamber along with motor, pressure gauge with isolation cock, isolation valve, nrv on delivery line. isolation valve, stainer (with by pass) at suction. pump shall be provided with mechanical seal, suitable vibration elimination pads of approved design, drain pipe with valve (25 dia), flexible mettalic pump collector of stainless steel corrugated tubing with stainless steel overbraid and carbon steel flanges. the pump shall be suitable for auto/ manual operation. the installation shall be complete with all necessary ancillaries & accessories including base plate complete as required. the flexible connectors shall be installed on both suction and delivery side of suitable size and standard length including electrical control panel with 1 vfd for operation & control of pump sets including provision of pressure vessel and capacity not less than 2 times the total suction volume of the pump to be provided as per directions of engineer in charge as per manufacturers standard. domestic pumps ugwt to ohwt (pump discharge = 240 lpm. head = 115m) (3 w + 1 s) set 2 sitc of ss vertical inline pump with positive suction. each pump shall have three phase electric motor of s1 duty. the pump shall have cast iron head, base plate ss shaft / impeller / intermediate chamber along with motor, pressure gauge with isolation cock, isolation valve, nrv on delivery line. isolation valve, stainer (with by pass) at suction. pump shall be provided with mechanical seal, suitable vibration elimination pads of approved design, drain pipe with valve (25 dia), flexible mettalic pump collector of stainless steel corrugated tubing with stainless steel overbraid and carbon steel flanges. the pump shall be suitable for auto/ manual operation. the installation shall be complete with all necessary ancillaries & accessories including base plate complete as required. the flexible connectors shall be installed on both suction and delivery side of suitable size and standard length including electrical control panel with 1 vfd for operation & control of pump sets including provision of pressure vessel and capacity not less than 2 times the total suction volume of the pump to be provided as per directions of engineer in charge as per manufacturers standard. drinking pumps ugwt to ohwt (pump discharge = 100 lpm, head = 115m) (2 w + 1 s) set 3 sitc of ss vertical inline pump with positive suction. each pump shall have three phase electric motor of s1 duty. the pump shall have cast iron head, base plate ss shaft / impeller / intermediate chamber along with motor, pressure gauge with isolation cock, isolation valve, nrv on delivery line. isolation valve, stainer (with by pass) at suction. pump shall be provided with mechanical seal, suitable vibration elimination pads of approved design, drain pipe with valve (25 dia), flexible mettalic pump collector of stainless steel corrugated tubing with stainless steel overbraid and carbon steel flanges. the pump shall be suitable for auto/ manual operation. the installation shall be complete with all necessary ancillaries & accessories including base plate complete as required. the flexible connectors shall be installed on both suction and delivery side of suitable size and standard length including electrical control panel with 1 vfd for operation & control of pump sets including provision of pressure vessel and capacity not less than 2 times the total suction volume of the pump to be provided as per directions of engineer in charge as per manufacturers standard. flushing pumps stp to ohwt (pump discharge = 250 lpm, head = 125 m) (3 w + 1 s) 4 sitc of stainless steel vertical in line pump sets consisting of 1 working & 1 standby pump having built in overload protection, motor housing, suction plate, bottom screen & all screws to be of stainless steel, motor cover & pump housing to be of corrosion proof cast iron, pump to have stainless steel impeller & double mechanical seals in oil chambers, including necessary supports/ foundations, main suction header & delivery header along with y strainers,isolation and n.r valve, pressure guages & pressure switches, all necessary fittings,and cable from panels to the individual pumps etc including electrical control panel with 1 vfd for operation & control of pump sets including provision of pressure vessel. complete as per directions of engineer in charge (terrace top 3 floor). 1 pump to run on vfd and the vfd shall be transferrable to any of the pumps. domestic terrace booster pump (pump discharge = 150 lpm, head =25m) (1 w + 1 s) set 5 sitc of vertical monoblock sewage/ mud pump with 1500 lpm @ 8 mwc , 5.5 kw (7.5 hp) (1w+1s) m) lv system & misc. 1 sitc of electric 360° occupancy slim pir presenting room ceiling mount 230v energy saving motion sensor, white css54e_we by making necessary arrangement/recess in wall to make it flush with surface. nos 2 video wall displays vhr r, vht e, vmt e, vmt u seriespanel size/class 54.6, type ips resolution 1920 * 1080, pixel pitch(mm) 0.63mm(h) * 0.63mm(v), active display area(mm) 1209.6mm * 680.4mm, brightness max 700cd/m2, contrast ratio 1200:1viewing angle(h/v) 178/178, response time(g to g) 8ms, display colors 8 bit 16.7mcolor gamut 72%, operation hour 24/7, haze 28%, dynamic c/r 500,000:1, h scanning frequency 57.3khz ~ 70khz, v scanning frequency 48hz ~ 75hz, maximum pixel frequency 77mhz, input rgb dvi d, display port 1.2, input video hdmi 2.0, input hdcp 2.2, input audio stereo mini jack usb only f/w upgrade, output rgb dp1.2(loop out), output audio stereo mini jack, external sensor detachable type(ir), power supply ac 240 v, 50/60 hz, power consumption 242wtypical [w/h] 136w, sleep mode less than 0.5w mechanicalnspec dimension(mm) set 1211.0 x 681.7 x 70 weight (kg) set 19.4 kg bezel width (mm) 0.9mm job 3 sitc for access control(human face: pin card ( em prox ) bluetooth supported device user profiles 50,000 facelogs 500,000 ,recognition * 3.5 ips lcd (touch screen ) , ip65 ,wifi , poe , access control feature ( door lock ) ,reports,integration with ms sql, my sql, oracle,,postgre, db2*web apis for integration with third,party application email,notification,enterprise structure and report,schedular,import user master data and export 500,000 events storage)metal electro magnetic lock ( em lock single )exit push button l bracket installation implementation training and one year support. job 4 sitc of intercom ip phone epabx system 1. spark200 matrix pure ip hardware platfrom for unified communication server pre loaded with 1 vocoder. on board cpu and ac power supply in 1u enclosure. max. ip trunks: 99 (license free) max. ip users: 2100. max. vocoder channels: 248 max. vms channels: 64. prasar ucs ent license built in2. sparsh vp510e proprietary ip phone with poe (voip protocol: proprietary • ethernet ports: 2 (pc andlan) • display: 240 x 64 pixels graphical lcd with backlit • color: black • programmable keys: 4 context sensitive keys, 16 dss keys. power supply: poe bms system software : web based graphical software meeting the requirements in the given i/o summary & technical specifications including configuration and facility to create / provide the graphic mapping for all i/o summary points, animate the graphics, navigation between pages, display of logs, changing the time zones, popup alarms, configurable password protection for building mgmt system as per specifications. software shall be able to communicate with lon works, bacnet, modbus devices simultaneously, with unlimited user license capacity.ul listed, btl certified, hardware interface/soft integrators with inbuilt webbrowser for third party equipment, open protocol software integration. these integrators shall be of same make as ddcs and shall contain all necessary ports for software intgeration of below mentioed equipment.ddc controller with i/o module, expandable to meet the io summary listed, the controllers shall be minimum 32 bit double microprocessor based standalone working on tcp/ip on bacnet ip with integral web browser, calender fundtion complete with day, month, week, year etc, real time clock & 1 second scan time. ddc working on 230v ac are preferred. the ddcs shall be capable of peer to peer communication without help of communication controller / router / system interface controller / pc and shall communicate with the building lan directly. these shall come with lockable mounting cabinets duly powder coated connector strip, internal wiring and space to house controller & relays, connector strip step down transformer, mcb, internal wiring. (contractor shall confirm his i/o provision w.r.t requirement on basis of data point) on ahrae approved bacnet protocol only. ddcs shall work on either 230v power supply or shall contain ul listed smps in the panel job 6 supply installation testing, programming & and commissioning work for a music system including 2c x 1.5 sq.mm, twin parallel multi stranded copper armoured/unmanoured cable in 20 /25 mm diameter pvc conduit. with full range, a 6.5 inch woofer and a 1.25 inch coaxial tweeter mounted within the dispersion alignment system, delivering a frequency range of 59 hz – 20 khz. public address amplifier 1200w 120v /mk2 version should have required signal to noise ratio, wireless handheld microphone, 9u 19 rack for mounting of all amplifire and player, portable bluetooth pa system, wireless option and usb ., one year on site support. one time user training. system configuration, tuning. documentation. with all required accessories including all support work. job 7 supply installation testing & and commissioning work for projector installation with projection screen image brightness 6000 ansi lumens 7,150 iso lumens ,contrast ratio • full on/off 1300:1 • 3,000,000:1 technology type native resolution 1 chip 0.67dmd s600hb1920 x 1200 wuxga 16:10 aspect ratio illumination type high efficiency blue laser phosphorperformance 20,000 hrs to 50% brightnessinputs hdmi (1.4a) • hdmi 2.0 • hdbaset • 3d sync in (bnc) • vga • audio in (3.5mm phone jack) • usb a • ir recieveroutputs 3d sync out (bnc) • hdmi • audio out (3.5mm phone jack),warping and blending standardtaa compliant yes speakers 2 x 10wlens type • 1.25 2.0:1 (1.6x throw ratio) motorized lens powered zoom, focus and offset • 0.65 0.75:1 (1.1x zoom) motorized lens powered zoom, focus and offset lens offset • vertical +/ 110% • horizontal +/ 50% • vertical +/ 100%• horizontal +/ 30%displayable scanning frequency scan rates max pixel clock rates• horizontal: 15.375 91.146 khz • vertical: 24 85 hz (120hz for 3d feature) • 594 mhz (4096 x 2160); 162 mhz (1600 x 1200) accessories standard • power cable ,ir remote control (batteries included) optional • dust filter • wifi dongle • 3.5mm cable for wired remote functionality 8 power requirements operating voltage • ac 100 240v, 50/60hz power consumption • 500w • 660w operating current • 5a • 6.5aaudible noise • 25dba 30dba depending • 27dba 34dba depending • 27dba 36dba depending on the mode used on the mode used on the mode used enviroment temperature • 0 40°chumidity • 10 85% rh altitude • 0 2,500ft @ 0°c 40° c • 2,500 5,000ft @ 0°c 35°c • 5,000 10,000ft @ 0°c 30°c• conforms to all relevant european directives, standards, safety, health and environmental concerns rohs, reach, weeewarranty • 3 years parts and labor on the projector • 3 years or 20,000 hours parts and labor on the illumination system• reference the christie standard limited warranty document for details• or contact an authorized christie representative for full details of our limited warranty n) hvac system 1 sitc of basement ventilation and smoke extraction system comprises of axial type fans, jet fans, co sensors and plc panel. system will be operational in case of normal mode and fire mode as pe the nbc considering 6 / 12 acph. the system also needs to be intergrated with fire panel through a potential free contact. 1. ceiling suspended fresh air tube axial dual speed fan suitable as per specifications, 12000 cfm vs 20 mm static (normal mode) 24000 cfm vs 80 mm static (fire mode)2. ceiling suspended exhaust air tube axial dual speed fan, suitable for 250° c for 2 hrs. and as per specifications 12000 cfm vs 20 mm static (normal mode) 24000 cfm vs 80 mm static (fire mode)3. ceiling suspended ductless centrifugal type dual speed jet fan suitable for 250° c for 2 hrs. and as per specifications ø504 mm : 3275 cfm (normal mode) ø504 mm : 6550 cfm (fire mode)4. co transmitters, 0 50 ppm5. microprocessor panel / controller with control cabling for integration of co transmitters and jet fans6. factory fabricated g.i. fresh air duct with flanges, supports etc.as per approved shop drawings, specifications and smacna standards 22 gauge (0.81 mm thick) 24 gauge (0.63 mm thick)7. fresh air weather louvers with bird screen8. distribution panel with mounting arrangements, incoming and outgoing mccb / mcb, indication of voltage, current & power, phaseindicating lights, contactor / over load relay with built in single phase preventor, power factor improvement (lagging) close to unityand input signal from fire alarm system and suitable for :1no. fresh air fan, 1no. exhaust air fan, 3nos. jet fans, 3nos. co transmitters, controllers and spares9. power cabling & earthing as per specifications between panel andall equipment with hangers, supports, and trays etc.4 core 16 sqmm cu armoured frls cable4 core 10 sqmm cu armoured frls cable4 core 6 sqmm cu armoured frls cable4 core 2.5 sqmm cu armoured frls cable4 core 1 sqmm cu armoured shielded cable (area 3500 sqm) job 2 sitc of staircase & lobby pressurisation is proposed for the fire staircase and the respective lobby to allow safe rescue of occupants and access to the firefighters. the pressure levels are to be maintained as per the norms laid by nbc 50 pascals. the system should contain axial fans, grilles for air distribution, a pressure relief damper and a necessary electrical panel. this system will be operational only in case of fire thus the system should be looped with a fire fighting system through a potential free contact. (4 staircases & 2 lift lobbies) (42,000 cfm) job 3 sitc of liftwell pressurisation.this system is proposed to provide smoke free lift access for fire fighters for quick access to floors . axial fans and electrical panel considered with necessary accessories. this system will be operational only in case of fire thus the system should be looped with fire fighting system through a potential free contact (27,500 cfm for one liftwell) nos 4 sitc of the system which is an essential component in helping to maintain indoor air quality and improve comfort for occupants. the system requires a proper selection of fans with the necessary static pressure for all toilets with properly sized gi ducting and other air distribution products. the foul air will be pushed to the ambient through gi ducting installed in the plumbing shaft. the system will be efficiently designed to keep the toilets smell free (20,000 cfm , 1 working & 1 standby) for ducting length approx 60 meter. job 5 air conditioningsitc of vrv system with modulating outdoor units, with r410 a refrigerant, multi scroll compressors (all variable), special precoated fins, panel, corrosion resistant(suitable for seaside installation) coated condenser, inverter basedcondenser fan, m.s. hot dip galvanised stands / supports,electrical & microprocessor panel, isolating valves and all the necessary accessories for proper functioning of the units, andcompatible to operate in cooling mode at 42 deg c ambient conditions,with following minimum cooling capacities. with all necessary accesories & properly sized gi ducting, other air distribution products for uniform distrution of air and maintain a temperature of 24 degc in the premises. a entrance lobby 50tr b food court 190 tr per tr c lift lobby 100 tr per tr d banquet hall 110 tr per tr e gym 30tr per tr 6 supply, installation, testing and commissioning of modulating outdoor units, with r410 a refrigerant, multi scroll compressors (all variable), special precoated fins, panel, corrosion resistant(suitable for seaside installation) coated condenser, inverter basedcondenser fan, m.s. hot dip galvanised stands / supports, electrical & microprocessor panel, isolating valves and all the necessary accessories for proper functioning of the units, andcompatible to operate in cooling mode at 42 deg c ambient conditions,with following minimum cooling capacities. all refrigerant (cu) piping along with fittings, hangers, trays and supports etc. between indoor & outdoor units duly class o insulatedfinished with glass cloth and lag coating as per specifications.gas piping with 19 mm nitrile rubber insulationliquid piping with 13 mm nitrile rubber insulationcommunication cabling between outdoor units and indoor units infrls pvc conduitms stands for odu unitspower cabling & earthing as per specifications between panel and all equipment with hangers, supports, and trays etc.14g perforated cable tray with cover 600mm x 100mm.(120 tr) per tr 7 sitc of the system is designed to remove smoke, heat, grease, and cooking odours generated during the cooking process in a kitchen. these systems are essential for maintaining a healthy and comfortable indoor environment with sisw exhaust fan with dry scrubber (optional), electrical panel, and also necessary ducting suitable to release the exhaust air outside the building on the same floor approx length 60 mtr. (10,000 cfm ) ...

Due Date : September 21, 2023

Tender Value : ₹ Ref. Documents

25

Konkan Railway Corporation Limited - Maharashtra

39631817 tender for construction of overhead tank, control room, pump house, jack well and approach road at chiplun railway station....

Due Date : October 03, 2023

Tender Value : ₹ 78.50 Lakhs

26

Rural Development Department - Maharashtra

39595448 providing trolley to grampanchayat theur, tal haveli, dist pune , trolley , 2 wheeler dumping trolley size 10ft x 6 ft x 2 ft axel 75mm, 8 stud hug, bearing 32211, 32213 8 inch chasis, base plate 5mm, pmp hydraulic jack, parker hose pipe...

Due Date : September 18, 2023

Tender Value : ₹ Ref. Documents

27

Smart City Development Corporation Limited - Maharashtra

39594728 tender for sant tukaram natyagruh electrical work 1 supplying and laying rigid steel conduit 16 swg 25 mm dia. with necessary accessories in rcc work / false ceiling / false flooring as per specification no: wgma / cc. ( 1 1 4 ) 2 supplying and erecting hms pvc conduit frls grade 25 mm dia. with necessary accessories in wall / floor with chiselling appropriately as per specification no: wg ma / cc ( 1 1 9 ) 3 supplying and layinghms pvc conduit frls grade 25 mm dia with necessary accessories in rcc work / false ceiling / false flooring as per specification no. wg ma / cc ( 1 1 10 ) 4 supplying and erecting hms pvc conduit frls grade25 mm dia. with pvc accessories on wall / ceiling as per specification no: wg ma / con. ( 1 2 4 ) 5 supplying and erecting mains with 2x1.5 sq.mm frlshcopperpvc insulated wire laid in provided conduit / trunking / inside pole / bus bars or any other places as per specification no: wg ma / bw ( 1 3 1 ) 6 supplying and erecting mains with 2x2.5 sq.mmfrlsh copper pvc insulated wire laid in provided conduit / trunking / inside pole / bus bars or any other places. as per specification no: wg ma / bw ( 1 3 2 ) 7 supplying and erecting mains with 3x4 sq.mm frlsh copper pvc insulated wire laid in provided conduit / trunking / inside pole / bus bars or any other places as per specification no: wg ma / bw ( 1 3 7 ) 8 supplying and erecting modular type switch 6a / 10a duly erected on provided plate and box with wiring connections complete. ( 1 6 1 ) 9 supplying and erecting modular type switch 16aduly erected on provided plate and box with wiring connections complete. ( 1 6 2 ) 10 supplying and erecting modular type 3 pin 6amultisocket with safety shutter, duly erected on provided plate and box with wiring connections complete. ( 1 6 10 ) 11 supplying and erecting modular type 3 pin 6 / 16amultisocket with safety shutter, duly erected on provided plate and box with wiring connections complete. ( 1 6 11 ) 12 supplying and erecting modular type t.v. socket single outlet, duly erected on provided plate and box with wiring connections complete. ( 1 6 14 ) 13 supplying and erecting modular type telephone socket one gangwith safety shutter, duly erected on provided plate and box with wiring connections complete. ( 1 6 15 ) 14 supplying and erecting modular type computer jack rj45 with safety shutter, duly erected on provided plate and box with wiring connections complete. ( 1 6 17 ) 15 supplying and erecting modular type ( two module ) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete. ( 1 6 23 ) 16 supplying and erecting modular type blanking plate two module, duly erected on provided plate & box. ( 1 6 25 ) 17 supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly erected flush to wall with required chiselling and finishing with cement mortar / pop as per required to match the background. ( 1 6 35 ) 18 supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement mortar / pop as per required to match the background. ( 1 6 36 ) 19 supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 4 module duly erected flush to wall with required chiselling and finishing with cement mortar / pop as per required to match the background. ( 1 6 37 ) 20 supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement mortar / pop as per required to match the background. ( 1 6 38 ) 21 supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 8 module duly erected flush to wall with required chiselling and finishing with cement mortar / pop as per required to match the background. ( 1 6 39 ) 22 supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 12 module duly erected flush to wall with required chiselling and finishing with cement mortar / pop as per required to match the background. ( 1 6 40 ) 23 supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 16 / 18 module duly erected flush to wall with required chiselling and finishing with cement mortar / pop as per required to match the background ( 1 6 41 ) 24 point wiring for light / bell / exhaust fan in 20 mm frls grade hms pvcconduit with 1.5 sq.mm ( 2+1e ) frlsh grade copper wire, modular type switch, earthingand required accessories as per specification no: wg pw / sw. ( 1 7 12 ) 25 point wiring for ceilingfan in 20 mm frls grade hms pvc conduit with 1.5 sq.mm ( 2+1e ) frlsh grade copper wire, modular type switch, earthingand required accessories as per specification no: wg pw / sw ( 1 7 13 ) 26 point wiring for independent plug in 20 mm frls grade hms pvc conduit with 1.5 sq.mm ( 2+1e ) frlsh grade copper wire, modular type switch, earthing and required accessories as per specification no: wg pw / sw ( 1 7 14 ) 27 point wiring for light / bell hybrid type ( surface type under false ceiling and concealed type for drops & switch boards on walls ) in min 20 mm pvc conduit / casing n capping with 1.5 sq.mm. ( 2+1e ) frlsh grade copper wires, modulartype switch, earthing and required accessories as per specification no: wgpw / hw ( 1 7 15 ) 28 point wiring for ceiling fan ( surface type under false ceiling and concealed type for drops & switch boards on walls ) in min 20 mm pvc conduit / casing n capping with 1.5 sq.mm. ( 2+1e ) frlsh grade copper wires, modular type switch, earthing and required accessories as per specification no: wg pw / hw 29 wiring for plug on board withswitch socket surface / concealed type, copper wiring and earthing and with modular accessories as per specification no: wg pw / cw ( 1 7 26 ) 30 supplying and erecting 2 pair telephone copper cable 0.5 mm dia. with high density polyethylene insulation, polyester taped, nylon rip cord & grey colour sheathed with fr pvc, conforming to itd specification s / ws 113c laid in provided pvc casing capping / conduit as perspecification no. wg tw ( 1 8 1 ) 31 supplying and erecting 50 pair telephone copper cable 0.5 mm dia. with high density polyethylene insulation, polyester taped, nylon rip cord & grey colour sheathed with fr pvc, conforming to itd specification s / ws 113c laid in provided pvc casing capping / conduit as perspecification no. wg tw ( 1 8 7 ) 32 supplying and erecting 15m vga cord low voltage gradeto be laid in provided conduits and terminating with male / female vga connectors complete. ( 1 8 20 ) 33 supplying, erecting and commissioning ofmdf box 50x50 pairs made from min. 1.5mm thick ms sheet as per specification no. wg tw ( 1 9 1 ) 34 supplying and installingexpansion cabinet for extension of digital hybrid epabx to expand system by 32 ports with programming and configuration of extensions and direct lines with required accessories complete. ( 1 9 33 ) 35 supplying and installingcat 6 cable suitable for networking as per specification no. wg coc / nc ( 1 10 1 ) 36 supplying, fixing, and configuring8 ports managed gigabit, layer 2 switch, 10 / 100 / 1000 base t, poe smart switch plus 2 sfp erected in provided rack complete. ( 1 11 2 ) 37 supplying, installing & testing utp connector ( rj 45 ) as per specification no. wg nas / utpc. ( 1 12 1 ) 38 supplying and fixing42 u floormount server rack ( dimension dxwxh – 800x1000x2070 mm ) as per specification no. wg nas / rak ( 1 12 29 ) 39 supplying and erecting led square / circular max. 18 w down lighter / panel light having pressure die cast aluminium housing, polystyrene diffuser having system lumens output of min. 2000 lumens, min. efficacy of 110 lumen / w, cri>80, cct upto 6500k, beam angle of 120 deg., max. ripple of 5%, thd<10%, p.f. >0.95, operating range of120 270v, surge protection of 2.5 kv, life class of 50, 000 hrs. at l70b50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. ( 2 1 5 ) 40 supplying and erecting led square / circular max. 25 w down lighter / panel light having pressure die cast aluminium housing, polystyrene diffuser having system lumens output of min. 2750 lumens, min. efficacy of 110 lumen / w, cri>80, cct upto 6500k, beam angle of 120 deg., max. ripple of 5%, thd<10%, p.f. >0.95, operating range of120 270v, surge protection of 2.5 kv, life class of 50, 000 hrs. at l70b50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. ( 2 1 6 ) 41 supplying and erecting ledpanel light ( 600mm x 600mm ) max. 35 whaving crca powder coated housing, polystyrene diffuser havingsystem lumens output of min 4200 lumens, min. efficacy of 120 lumen / w, cri>80, cct upto 6500k, beam angle of 120 deg., max. ripple of 5%, thd<10%, p.f. >0.95, operating range of120 270v, surge protection of 2.5 kv, life class of 50, 000 hrs. at l70b50including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. ( 2 1 8 ) 42 supplying and erecting anodized aluminium corridor / passage light led fitting ( 4 feet ) max. 22wwith high transitivity diffuser withsystem lumens output ofmin.2200 lumens , min. efficacy of 100 lumen / w, cri>80, cct upto 6000k, beam angle of 110 deg., ripple<5%, thd<10%, p.f. >0.95, operating range of200 270v, surge protection of 2 kv, life class of 50, 000 hrs. at l70b50, including driver, with end caps on provided pvc block / wooden board with 3 years warranty. ( 2 1 18 ) 43 supplying and erecting inverter led batten 20w tube light fitting with polycarbonate housing, heat sink, integrated hf electronic driver, min. 2600 mah lithium ion battery with charging time of 8 10 hours and backup time of min. 3 hrs. with minimum 25% of initial watts having luminous efficacy of 100 lumen / watt, cri>80, cct of 6500k and thd<=20% havinguseful life of minimum 25000 hrs. with overheating protection with 2 years warranty. ( 2 1 22 ) 44 supplying and erecting uv fly killer / bug catcher light fittinghaving 2 x 20w uv tube lights to cover min. area of 500 sq.ftwith powdered coated m.s. / steel body suitable to work on 230v, ac supply having top mounting arrangement with ss chain complete and 3 core 1 mtr. flexible wire with 1 year warranty. ( 2 1 23 ) 45 supplying and erecting ding dong / electronic musical type call bell with heavy duty coilsuitable to operate on 230v a.c. supply erected on polished double wooden block / sunmica block of suitable size. ( 2 3 13 ) 46 supplying and erecting exhaust fan medium duty 230 v a.c. 50 cycles 225 mm. 1400 rpm with condenser complete erected in position with necessary materials. fan motor with moisture proof treatment and ‘e’ class insulation. ( 2 10 15 ) 47 supplying and erecting energy saving bldc ceiling fan 230 v a.c. 50 cycles 1200 mm, max. energy consumption of28w having service ratio ( cmm / w ) of min. 8 , pf>0.9, thd<10% with ir remote control / compatible speed regulator, temperature rise of max. 40 deg. c, having external mounted control pcb completely erected in position as per specification no. fg fn / cf ( 2 10 22 ) 48 supplying and fixinganchor type fastener fan hook, with 2 nos. of 10 mm dia x 75 mm long with necessary materials for ceiling fan. ( 2 11 2 ) 49 supplying and erecting fan clamp of 30 x 5 mm. m.s. flat of required length and 10 mm.m.s. bolt and nuts erected with necessary hook of 10 mm. m.s. round bar and painted. ( 2 11 3 ) 50 supplying and erecting ‘b’ class g.i .pipe / m.s. pipe down rod duly painted for fan complete erected with pvc three core flexible cable 1 sq. mm copper pvc wire. ( 2 11 6 ) 51 providing recess in brick wall suitable for erection of exhaust fan up to 450mm. sweep complete with grouting of nut, bolts, plastering and colour washing to match the colour of the wall for the wall thickness of 225 mm. ( 2 11 11 ) 52 supplying and erecting 20 swg g.i sheet metal cawl rectangular / round shaped with 25 x 25x 3 ( mm ) angle iron frame, metal mesh to avoid birds entry with necessary material, suitable for exhaust fan of 300 mm as per specification no fg fas / msc ( 2 11 17 ) 53 supplying and erecting storage type water heater 25 litres capacity having standing loss <0.511kwh / 24hour / 45°c, high impact resistance engineering plastic body with anti corrosive high grade steel inner tank, heating element having hard water & corrosion protection, with minimum 3 safety protections ( i.e. thermostat & thermalfunctioncut out, valve ) with total pressure 8 bar withstanding capacity duly tested and marking sr. no. and date of erection complete. specification no. ap wh / stwh ( 3 1 2 ) 54 supplying, erecting, testing and commissioning ofself contained water cooler 230 / 250v 50hz nominal cooling capacity of 150 litres per hour and storage capacity 150 litres with partially stainless steel body as per specification no. ap wcr / wc ( 3 3 10 ) 55 supplying, installing, testing and commissioning of10kva capacity onlinepure sine wave with backup time of ....... hrs. pwm & igbt based ups with 0.9 to unity output pf, 3 phase input & 1 phase output complete with all protectionsas per specification no. ap ups ( 3 7 6 ) 56 supplying and erecting 12v / 100ah smf battery with battery terminal wire, duly charged with 24 months warranty complete. ( 3 8 12 ) 57 supplying and erecting on load four pole automatic transfer switch, 415v, 400a, 50 hz with enclosure, flexibility of neutral connection, line and load reversibility, changeover with phase barriers, source separator, terminal covers along with staggered termination for cable connection and ats controller with provision of time delay protection of ov, uv, phase sequence changing, single phasing and event logging, connected with provided leads complete complying to is / iec 60947 3 part 1 / 6 . ( 5 1 14 ) 58 supplying, erectingandmarking spmcb 6a to 32a, c serieswith rated short circuit breaking capacity ( icn ) 10ka in provided distribution board as per specification no. sw swr / mcb ( 5 3 2 ) 59 supplying, erectingandmarking spmcb 6a to 32a, b series with rated short circuit breaking capacity ( icn ) 10ka in provided distribution board as per specification no. sw swr / mcb ( 5 3 3 ) 60 supplying, erectingandmarking spmcb 40a to 63a, b series with rated short circuit breaking capacity ( icn ) 10ka in provided distribution board as per specification no. sw swr / mcb ( 5 3 5 ) 61 supplying, erectingandmarking dpmcb 6 a to 32 a, b series with rated short circuit breaking capacity ( icn ) 10ka in provided distribution board as per specification no. sw swr / mcb ( 5 3 7 ) 62 supplying, erectingandmarking dpmcb 40a to 63a, c series with rated short circuit breaking capacity ( icn ) 10ka in provided distribution board as per specification no. sw swr / mcb ( 5 3 8 ) 63 supplying, erectingandmarking tpmcb 6a to 32a, with rated short circuit breaking capacity ( icn ) 10ka in provided distribution board as per specification no. sw swr / mcb ( 5 3 10 ) 64 supplying, erectingandmarking tpmcb 40a to 63a, with rated short circuit breaking capacity ( icn ) 10ka in provided distribution board as per specification no. sw swr / mcb ( 5 3 11 ) 65 supplying and erecting triplepole and neutral distribution board ( tpndb ) , sp / tp mcbs total 4 ways / 12 poles, with door, 1.2mm thickness surface / flushmounted, ip 43 protection on iron / gi frame ( vertical busbar type ) as per specification no. sw swr / mcbdb ( 5 4 4 ) 66 supplying and erecting triplepoleand neutral distribution board ( tpndb ) , sp / tp mcbs total 8 ways / 24 poles, with door, 1.2mm thickness surface / flush mounted, ip 43 protection on iron / gi frame ( vertical busbar type ) as per specification no. sw swr / mcbdb ( 5 4 5 ) 67 supplying and erecting triplepoleand neutral distribution board ( tpndb ) , sp / tp mcbs total 12 ways / 36 poles, with door, 1.2mm thickness surface / flushmounted, ip 43 protection on iron / giframe ( vertical busbar type ) as per specification no. sw swr / mcbdb ( 5 4 6 ) 68 supplying and erecting single pole and neutral distributionboard ( spndb ) , with 2 ways for incoming and 6 ways ( 6 poles ) for outgoing sp mcbs, with door, 1.2mm thickness surface / flush mounted, ip 43 protection on iron / gi frame as per specification no. sw swr / mcbdb ( 5 4 8 ) 69 supplying and erecting single pole and neutral distributionboard ( spndb ) , with 2 ways for incoming and 10 ways ( 10 poles ) for outgoing sp mcbs, with door, 1.2mm thickness surface / flush mounted, ip 43 protection on iron / gi frame as per specification no. sw swr / mcbdb ( 5 4 9 ) 70 providing and erecting 3 pole mccb, 415 v, 100a, rated short circuit breaking capacity 25 ka ( ics=100% of icu ) , adjustable thermal ( overload ) setting and fixed magnetic setting with provided leads, provision for installation of shunt / uv / trip alarm contact.mccb with phase barriers on both sides, insulation withstand capacity 800v, no line load bias in provided enclosure / panel as per specification no. sw swr / mccb ( 5 5 1 ) 71 providing and erecting 3 pole mccb 415v, 250a, rated short circuit breaking capacity 36 ka ( ics=100% of icu ) adjustable thermal ( overload ) setting and adjustable magnetic setting with provided leads, provision for installation of shunt / uv / trip alarm contact and mccb should have phase barriers both sides, with insulation withstand capacity 800v, no line load bias in provided enclosure / panel as per specification no. sw swr / mccb ( 5 5 3 ) 72 providing and erecting 3 pole mccb 415v, 400a, rated short circuit breaking capacity 36 ka ( ics=100% of icu ) , adjustablethermal ( overload ) setting and adjustable magnetic setting with provided leads, provision for installation of shunt / uv / trip alarm contact and mccb should have phase barriers both sides, with insulation withstand capacity 800v, no line load bias in provided enclosure / panel as per specification no. sw swr / mccb ( 5 5 4 ) 73 providing and erecting 3 pole mccb 415v, 630a, rated short circuit breaking capacity 36 ka ( ics=100% of icu ) , adjustable thermal ( overload ) setting and adjustable magnetic setting with provided leads, provision for installation of shunt / uv / trip alarm contact and mccb should have phase barriers both sides, with insulation withstand capacity 800v, no line load bias in provided enclosure / panel as per specification no. sw swr / mccb ( 5 5 5 ) 74 providing and erecting 3 pole mccb, 415v, 800a, rated short circuit breaking capacity 50 ka ( ics=100% of icu ) , adjustable thermal ( overload ) setting and adjustable magnetic setting with provided leads, provision for installation of shunt / uv / trip alarm contact and mccb should have phase barriers both sides, with insulation withstand capacity 800v, no line load bias in provided enclosure / panel as per specification no. sw swr / mccb ( 5 5 6 ) 75 supplying, fixing, and commissioning 4 polercbo 6 / 10 / 16 / 20 / 25a, with overcurrent, rated short circuit breaking capacity ( 10 ka ) and earth leakage protection, with 30 / 100 / 300 ma sensitivity and short circuit and earth leakage trip indications per specification no sw rccb / rcbo ( 5 6 12 ) 76 supplying, installing, testing and commissioning ofair circuit breaker manual fixed type, non drawout type, 650v, 1000a rated at 50º c without deration, 12kv impulse, 4 pole ( 100% neutral protection ) , 50 ka ( ics=icu=icw for 1s ) , with standard accessories with ready to close, individual fault trip, alarm and tripindication, mechanical and electrical anti pumping, soft / hard rating plug ( including hard rating plug ct ) with micro processer based lcd display release with lsig and temperature rise protection & with 4 c / o contacts for on off trip indication, min. 5 event and trip history on breaker display on provided iron frame as per specification no. sw swr / acb ( 5 8 3 ) 77 supplying and erecting metal work in crca sheet including iron work for supportswith fabrication ofboxes, panelboards, etc. including cutting, bending, drilling, welding, riveting, treated with anti rust treatment andduly powder coated or paintedwith one coat of red lead paint and 2 coats of enamel paint complete. ( 6 1 1 ) 78 supplying and erecting iron work, sheet metal work consisting of crcasheets, varioussectionsofiron, plates, chequeredplates, rods, bars, mspipes, etc. forpanel board or any other purpose with bending, cutting, drilling and welding completeerectedatthepositionwith necessarymaterialsdulypaintedwith one coat of red oxide and two coats of enamelpaint to match the switchgears or as per directions by the authority. ( 6 1 19 ) 79 supplying and erecting 250 kvar, 3 phase, 50 hz., power contactors derated for microprocessor apfc controller with mpp / app type capacitor with 525 v and having minimum overcurrent capacity of 1.8 in, peak inrush current capacity 300 inand minimum life 150000 hours with , consisting of suitable steps of mpp / app type capacitor unitswith detuned aluminium filter 7% reactors with circuit breaker as main incomer and mccb for each branch protection, as per specification no cp ed / apfc ( 6 7 17 ) 80 supplying, erecting & terminating fr xlpe insulated, galvanised steelformed wire armoured ( strip ) cable 1100 v, 3½ core 25 sq. mm. aluminiumconductor complete erected with glands & lugs, on wall / trusses / pole or laid inprovided trench / pipe as per specification no. cb lt / al 81 supplying, erecting & terminating fr xlpe insulated, galvanised steelformed wire armoured ( strip ) cable 1100 v, 3½ core 35 sq. mm. aluminiumconductor complete erected with glands & lugs, on wall / trusses / pole or laid inprovided trench / pipe as per specification no. cb lt / al 82 supplying, erecting & terminating fr xlpe insulated, galvanised steelformed wire armoured ( strip ) cable 1100 v, 3½ core 50 sq. mm. aluminiumconductor complete erected with glands & lugs, on wall / trusses / pole or laid inprovided trench / pipe as per specification no. cb lt / al 83 supplying, erecting & terminating fr xlpe insulated, galvanised steel formedwire armoured ( strip ) cable 1100 v, 3½ core 150 sq. mm. aluminiumconductor complete erected with glands & lugs, on wall / trusses / pole or laid inprovided trench / pipe as per specification no. cb lt / al 84 supplying, erecting & terminating fr xlpe insulated, galvanised steelformed wire armoured ( strip ) cable 1100 v, 3½ core 300 sq. mm. aluminiumconductor complete erected with glands & lugs, on wall / trusses / pole or laid inprovided trench / pipe as per specification no. cb lt / al 85 supplying and erecting g.i. pipe ‘a’ class75 mmdia.erectedfor enclosingxlpearmouredcable on wall / poleas per specification no. cb ce ( 7 6 4 ) 86 providing and erecting hot dipped galvanised cover suitable for perforated type cable tray manufactured from 18 swg ( 1.2 mm thick ) gi sheet of 200 mm width & 20 mm height complete with necessary hardware. ( 7 11 12 ) 87 providing and erecting hot dipped galvanised cover suitable for perforated type cable tray manufactured from 18 swg ( 1.2 mm thick ) gi sheet of 500 mm width & 20 mm height complete with necessary hardware. ( 7 11 15 ) 88 providing pipetype earthing with 40mm. dia. g.i. pipe or 20 mm dia. g.i. rodcomplete with all materials testing and recording the results as per specification no. ea ep ( 9 1 4 ) 89 supplying and erecting aluminium strip of high purity required sizes used for earthing on wall and / or any other purpose with necessaryaluminiumclampsfixed on wall painted with bituminous paint with joints required as per specification no ea ep. ( 9 2 1 ) 90 supplying and erecting conventionalspike typeair termination suitable to carry lightning stroke made up of heavy gauge40 mm dia copper pipe of standard length with 5 nos. copper spikes fixed on copper ball as air terminals duly threaded in copper pipeerected on provided foundation complete. ( 9 3 1 ) 91 providing and back filling ground enhancing compound 25 kg bag complete. ( 9 3 2 ) 92 supplying, installation and testing of maintenance free earthing comprising ofelectrode of 17.2 mm diameter low carbon steel with 250 micron molecularcopper bonded earthing rod of length 3m along with 25 kg carbon basedenvironment friendly back fill ground enhancing compound required to fill up theexcavated earth with required quantity complete, and recording the resultsspecification no. ea mobi ( 9.1.5 ) 93 supplying, erecting, testing and commissioning3 10 watt smart wired led ceiling lamp downlighter wiz connected ( shades of white / warm white + dimmable + pre set modes ) ( non csr ) 94 supplying, erecting, testing and commissioning of wall / floor mounted three phase 415 v electronic dimmer 12x4 kw having rectangular shape semi automatic / dmx type, with ryb indicator, having 24 input jackwith crca housing min 22 gauge with all internal mcb, wiring, controlling accessories complete ( non csr ) 95 supplying and erecting pvc insulated pvc round sheathed 1.5 sq.mm ( 30 no. x 0.25 mm dia. ) 3 core flexible multi stranded copper industrial cable for voltage grade up to 1.1 kv ( 1 3 14 ) 96 supplying and erecting integrated led street light fitting 60w ip65 & ik08 class having single piece pressure die cast aluminium housing, havingsystem lumens output of min. 6600 lumens, min. efficacy of 110 lumen / w, cri>70, cct upto 6500k, thd<10%, p.f. >0.95, operating range of140 270v, inbuilt surge protection of 10 kv, life class of 50, 000 hrs. at l70b50, including driver complete with 3 years warranty as per specification nofg odf / fls2. ( 2 4 5 ) 97 supplying and erecting three phase, 415v, street light control panel up to the max load of 6kw, tpn mcb 40a, powder coated crca 14 swg sheet, outdoor type, having ip54, ik10 protection, suitable rating contactor, 24 hrs. astronomical time switch with minimum 5 years battery back up, auto / manual selector switch, on / off push buttons, indicator lamps, control wiring, metering device, etc. for automatic operation, with overcurrent, short circuit, earth fault protectionon provided iron frame / cc foundation . ( 5 2 5 ) 98 supplying, erecting & marking spmcb 0.5a to 5a, c series with rated short circuit breaking capacity ( icn ) 10ka in provided distribution board as per specification no. sw swr / mcb ( 5 3 1 ) 99 supplying, erectingandmarking tpmcb 40a to 63a, with rated short circuit breaking capacity ( icn ) 10ka in provided distribution board as per specification no. sw swr / mcb ( 5 3 11 ) 100 supplying & erecting triple pole and neutral distribution board ( tpndb ) , 3 pole / 4 pole mccb as incomer & outgoing sp mcb ( 12 poles ) or tp mcb of 4 ways ( 12 poles ) , with door, 1.2mm thickness, surface / flush mounted, on iron / gi frame ( vertical busbar type ) as per specification no. sw swr / mcbdb1 ( 5 4 15 ) 101 supplying and erecting gi sheet 1.6mm ( 16 swg ) caution board of size 250 x 200 mm duly painted with red oxide and enamel paint in marathi, hindi and english erected at position for hv / ehv ( 11000 volts ) installation with compliance to is 2551 1982 ( 6 1 16 ) 102 supplying and erecting iron work, sheet metal work consisting of crcasheets, varioussectionsofiron, plates, chequeredplates, rods, bars, mspipes, etc. forpanel board or any other purpose with bending, cutting, drilling and welding completeerectedatthepositionwith necessarymaterialsdulypaintedwith one coat of red oxide and two coats of enamelpaint to match the switchgears or as per directions by the authority. ( 6 1 19 ) 103 supplying, erecting & terminating xlpe insulated, galvanised steel formed wire armoured ( strip ) cable 1100 v, 4 core 6sq. mm. aluminium conductor completeerected with glands & lugs, on wall / trusses / pole or laid in provided trench / pipeas per specification no. cb lt / al ( note for use of xlpe insulation instead of fr xlpe insulated armoured cable reduce rates by 5 % ) ( 7 1 27 ) 104 supplying, erecting & terminating xlpe insulated, galvanised steel formed wire armoured ( strip ) cable 1100 v, 4 core 25 sq. mm. aluminium conductor completeerected with glands & lugs, on wall / trusses / pole or laid in provided trench / pipeas per specification no. cb lt / al ( note for use of xlpe insulation instead of fr xlpe insulated armoured cable reduce rates by 5 % ) ( 7 1 30 ) 105 supplying andlaying ( including excavation of suitable width & depth up to 90 cm ) 50 mmoutside dia. double wall corrugatedpipes ( dwc ) ofhdpe for enclosing cable below ground / road surface, to required depth complete. 106 providing and erecting 6 m high ( clear height ) galvanised octagonal pole with foundation bolts having bottom of 130 mm a / f, top 70 mm a / f on provided foundation as per specification no. oh pl / opl ( 8 2 12 ) 107 providing and erecting galvanised 1000mm single arm sword type bracket with frp dome and ball as per specification no. oh pl / pbkt ( 8 2 21 ) 108 providng earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. ea ep ( 9 1 1 ) 109 providing pipetype earthing with 40mm. dia. g.i. pipe or 20 mm dia. g.i. rodcomplete with all materials testing and recording the results as per specification no. ea ep ( 9 1 4 ) 110 supplying and erecting gi strip of high purity required size used for earthing on wall and / or any other purpose with necessary gi clampsfixed on wall painted with bituminous paint with joints required. as per specification no ea ep. ( 9 2 3 ) 111 making cement concretefoundationin 1:3:6 cement concrete, ( 20 to 25 ) mm. stone metal duly plastered with necessary curing forcomplete. ( pole muffing or any other purpose ) . ( 16 3 7 ) 112 makingm 20 grade reinforced cement concretefoundation by considering the safe soil bearing capacity at site as 10 t / sq.mat 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete ( for 6m to 8m high octagonal / conical gi pole ) . ( 16 3 9 ) 113 supplying, erectingandmarking tpmcb 40a to 63a, with rated short circuit breaking capacity ( icn ) 10ka in provided distribution board as per specification no. sw swr / mcb ( 5 3 11 ) 114 supplying, fixing, and commissioning mcb type change over switch 4 pole, 40a with 3 positions ( i o ii ) with centre off position as per specification no. sw swr / mcbcos ( 5 3 25 ) 115 supplying and erecting crca sheet metal one way enclosures of 1.2mm thickness suitable for dp mcb / tp mcb / fp mcb / rccb / rcbo complete erected on angle iron / gi frame. ( 5 4 13 ) 116 supplying, erecting & terminating fr xlpe insulated, galvanised steel formed wire armoured ( strip ) cable 1100 v, 4 core6sq. mm. aluminium conductor completeerected with glands & lugs, on wall / trusses / pole or laid in provided trench / pipeas per specification no. cb lt / al ( 7 1 27 ) 117 supplying and erecting g.i. pipe‘a’ class 40 mmdia.erectedfor enclosingxlpearmouredcable on wall / poleas per specification no. cb ce ( 7 6 2 ) 118 supplying and laying ( including excavation ) of suitable width & depth up to 90 cm ) 50 mmoutside dia. double wall corrugatedpipes ( dwc ) ofhdpe for enclosing cable below ground / road surface, to required depth complete. ( 7 6 9 ) 119 providing earthing with galvanizediron earth plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block c.l. covercomplete with all materials, testing & recording the results asper specification no. ea ep ( 9 1 3 ) 120 providing pipetype earthing with 40mm. dia. g.i. pipe or 20 mm dia. g.i. rodcomplete with all materials testing and recording the results as per specification no. ea ep ( 9 1 4 ) 121 supplying and erecting minimum three & above star rated submersible pump set of 2.25 kw / 3 hp with 415 v, 50 c / s ac supply suitable for 100 mm dia. borewell suitable for 60 to 170 lpm discharge at 97 to 30 m head & discharge & delivery pipe of size 40 mm diameter with a necessary h type clamps as per specification no. wp smp 122 supplying and erecting minimum three & above star rated submersible pump set suitable for erection on open well of 5.625 kw / 7.5 hp with 415 v 50 c / s. a.c. supply, having delivery head from 36 to 14m and discharge from 225 to 1680 litres. per minute& pipe of suction 75 mm / delivery 65 mm diameter erected with necessary h type clamps as per specification no. wp osp ( 12 3 3 ) 123 supplying and erecting flat flexible 3 core 2.5 sq.mm pvc sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete. ( 12 4 8 ) 124 supplying and erecting flat flexible 3 core 4 sq.mm pvc sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete. ( 12 4 9 ) 125 supplying and erecting water level controller 230 / 415 v, a.c. , four way under ground & over head tank operation only. ( 12 4 15 ) 126 supplying & erecting pvc coated 5 mm dia. brass sensor / electrode duly wired with nuts & bolts complete ( set of 3 nos ) . ( 12 4 15 ) 127 supplying and erecting automatic control panel for 3 phase , 415 volt, a.c, submersible / centrifugal pump set up to 7.5 hp consisting of dol starter having relay range 9 14 amp, s.p.p., combined ammeter / voltmeter, phase indicating lamp enclosed in crca powder coated vibration proof enclosure with ip 54 protection. control panel should offer single phasing, phase reversal, phase imbalance etc . ( 12 4 17 ) 128 excavating hard rock or bituminous road by chiselling for preparing pit for pole / stay / earth plate / for laying cable / pipe & clearing the site by removing debris & making the site as required complete. ( 16 1 5 ) 129 making cement concretefoundationin 1:3:6 cement concrete, ( 20 to 25 ) mm. stone metal duly plastered with necessary curing forcomplete. ( pole muffing or any other purpose ) . ( 16 3 7 ) 130 supplying and erecting isi mark gi pipe 50 mm dia.‘b’ class at position with accessories complete as per specification no. cw plb / gp. ( 16 5 6 ) 131 supplying and erecting isi mark gi pipe 75 / 80 mm dia. ‘b’ class at positionwith accessories complete. specification no. cw plb / gp. ( 16 5 8 ) 132 supplying and erecting high density polythene pipe isi mark 50 mm. dia. suitable for pressure of 6 kg. / cm2 connected tojet / submersible pump with required material complete. ( 16 5 18 ) 133 supplying and erecting 50 mm dia. gun metal sluice valve at position with necessary materials complete. ( 16 6 15 ) 134 supplying and erecting non return valve 50 mm dia in position made of gun metal complete. ( 16 6 21 ) 135 supplying and erectinghms pvc conduit frls grade 25 mm dia. with necessary accessories in wall / floor with chiselling appropriately as per specification no: wg ma / cc. 1 1 9 136 supplying and laying hms pvc conduit frls grade 25 mm dia with necessary accessories in rcc work / false ceiling / false flooring as per specification no. wg ma / cc. 1 1 10 137 supplying and erecting 25 mm dia. corrugated flexiblepolypropylene conduit 1 2 2 138 supplying and erecting 10m hdmi cord low voltage grademinimum 4k compliant to be laid in provided conduits with male / female 19 pin hdmi connectors complete.. 1 8 23 139 supplying and installingcat 6 cable suitable for networking as per specification no. wg coc / nc 1 10 1 140 supplying, fixing, and configuring 24 ports, poe switch in provided rack as perspecification no. wg nwc / ens ( 1 11 3 ) 141 supplying, installing and testing utp connector ( rj 45 ) as per specification no. wg nas / utpc. 1 12 1 142 supplying and fixing 9u wall mount rack ( dimension dxwxh – 500x600x500 mm ) as per specification no. wg nas / rak1 12 18 143 supplying and fixing 24 ports light guide unloaded interconnect unit, wall mounted type, with adapter panel for termination of optical fibre cables onwall in provided u rack complete as per specification no. wg nas / liu 1 12 8 144 supplying, installing, testing and commissioning of2kva capacity online pure sine wave, with backup time of 03 hrs. pwm & igbt based ups with 0.8 to unity output pf, single phase input & 1 phase output complete with all protections as per specification no. ap ups ( 3 7 2 ) 145 supplying and erecting 12v / 100ah smf battery with battery terminal wire, duly charged with 24 months warranty complete. ( 3 8 12 ) 146 supplying, erecting, testing & commissioning 5 mp full ip dome camera complete. camera sensor 1 / 2.7, 5.0 megapixel, progressive scan, cmoslens 2.8mm@f2.0dori distance 42 meter detectshutter auto / manual, 1 ~ 1 / 100000s colour: 0.01lux ( f2.0, agc on ) minimum illumination 0lux with ir ondigital noise reduction 2d / 3d dnrday / night ir cut filter with auto switch ( icr ) s / n >52dbir range up to 30m ( 98ft ) ir rangewavelength 850nmir on / off control auto / manualdefog digital defogwdr dwdrvideo max. resolution 2592 x 1944video compression ultra 265, h.265, h.264, mjpegh.264 code profile baseline profile, main profileframe rate main stream: 5mp ( 2592*1944 ) , min 25fps; sub stream: 720p ( 1280×720 ) , min 20fpsvideo bit rate 128 kbps~16 mbpsosd up to 4 osdsprivacy mask up to 4 areasroi up to 2 areasmotion detection up to 4 areasimage white balance auto / outdoor / fine tune / sodium lamp / locked / auto2digital noise reduction 2d / 3d dnrsmart ir supportflip normal / vertical / horizontal / 180°dewarping nahlc supportedblc supportednetwork protocols ipv4, igmp, icmp, arp, tcp, udp, dhcp, rtp, rtsp, rtcp, dns, ddns, ntp, ftp, upnp, http, https, smtp, ssl, qosinterface 10 / 100m base tx ethernetcompatible integration onvif ( profile s, profile t ) , apicertifications certifications ce: en 60950 1 / ul: ul60950 1 / fcc: fcc part 15 ( include – 12 month fully compressive warranty ) ( rates are as per sanct.lt.no.431 dt.22.03..2022 ) ( non csr ) 147 supplying, erecting, testing & commissioning 5 mp full ip bullet camera complete. camera sensor 1 / 2.7, 5.0 megapixel, progressive scan, cmoslens 4.0mm@f2.0dori distance 60 meter detectshutter auto / manual, 1 ~ 1 / 100000s colour: 0.01lux ( f2.0, agc on ) minimum illumination 0lux with ir ondigital noise reduction 2d / 3d dnrday / night ir cut filter with auto switch ( icr ) s / n >52dbir range up to 30m ( 98ft ) ir rangewavelength 850nmir on / off control auto / manualdefog digital defogwdr dwdrvideo video compression ultra 265, h.265, h.264, mjpegh.264 code profile baseline profile, main profileframe rate main stream: 5mp ( 2592*1944 ) , min 25fps; sub stream: 720p ( 1280×720 ) , min 20fpsvideo bit rate 128 kbps~16 mbpsosd up to 4 osdsprivacy mask up to 4 areasroi up to 2 areasmotion detection up to 4 areasimage white balance auto / outdoor / fine tune / sodium lamp / locked / auto2digital noise reduction 2d / 3d dnrsmart ir supportflip normal / vertical / horizontal / 180°dewarping nahlc supportedblc supportednetwork protocols ipv4, igmp, icmp, arp, tcp, udp, dhcp, rtp, rtsp, rtcp, dns, ddns, ntp, ftp, upnp, http, https, smtp, ssl, qosinterface 10 / 100m base tx ethernetcompatible integration onvif ( profile s, profile t ) , apicertifications certifications ce: en 60950 1 / ul: ul60950 1 / fcc: fcc part 15 ( non csr ) 148 supplying, erecting, testing & commissioningcamera nvr 32 channel system specifications :32ch with 4k real time live preview max 32q mbps incoming bandwidth with h.265 compression, decoding support upto 4 x 4k@30, 8 x 4mp@20 on vif version 2.4 conformance vca search and smart search for playback support 8 sata hdd up to 64tb with raid configuration, 2 usb 2.0, 1 usb. ( non csr ) 149 supplying and installation testing & commissioning of surveillance internal hdd ( hard disk drive ) internal hdd supply , installation testing and commissioning for surveillance hddrecording capacity 8tb. ( non csr ) 150 supplying, erecting, commissioning & testing screen ( 108 cm ) / 40 inchpecifications general o screen size : 108 cm ( 43 ) • screen type : led • hd technology & resolution : full hd tv, 1920 x 1080 • hdmi : 3, usb : 1 • launch year : 2018 onnectivity features : hdmi, 2 side : usb o 1 side video features • contrast ratio : mega contrast ( static ) • picture engine : hyper real • view angle : 178 degree • panel type : a+, digital noise filter : yes • led display type : direct • aspect ratio16:09 • refresh rateo 60 hz • other video features o pmi 300: clarity, color, contrast, active noise reduction, dynamic color enhancer o picture mode: 8 modes ( vivid, standard, aps, cinema, cricket, game, expert1, expert2 ) o picture: jpeg, digital noise reduction, movies support in usb mode, mpeg h.264 decoder o response time: 6.5 ms, still image, wide color enhancer ( plus ) , film mode, cricket mode audio features • number of speakers : 2 • speaker type: down firing with bass reflex • sound technology : dolby digital plus • speaker output rms : 20 w warranty • warranty summary : 1 year comprehensive and 1 year additional on panel. ( non csr ) ...

Due Date : September 20, 2023

Tender Value : ₹ 85.19 Lakhs

28

Department Of Dairy Development - Maharashtra

39589912 selling / disposal of scrap dairy machineries / material available at govt milk scheme amravati and govt milk chilling centers, chandur railway, morshi, paratwada, semadoh 1 can conveyor weigh bowl, weigh scale, can drip saver, motor with gear box, chain pully wheel, chain railing 2 compressor motor crompton greaves 20 hp 3 compressor k40x110 kirloskar 4 itb coil 5 condenser water pump crompton 10 hp 6 liquid separator 7 fat machine 24 bottle electric 8 dunlop jack 12 ton 9 chemical balance 10 steel drum 11 hand driven earth tester 3 terminal 12 chemical balance 200 gm 13 f12 gas cylinder 14 water bath 15 dunlop jack 6 ton 16 diffuser 17 milk pump alfalaval 3.5 hp 18 hot water generator double ace mumbai 19 weigh bridge electronic 2 kg 20 water purifier 21 coding machine 22 air compressor tc1500 elgi 23 milk storage tank vulcan 10kl ( m.s.cutter ) 24 milk storage tank vulcan 10kl ( m.s.cutter ) 25 walkin cooler assly, compressor, condenser, 2 no plus accessories 26 water demineralisation plant, blower, motor, water storage tank 20000ltr, 27 cream separator vulcan 5000 ltr, with 7.5 hp motor 28 milk clrafier vulcan 5000 ltr with 7.5 hp motor 29 freon compressor extra 216 30 freon compressor extra 216 without crankshaft 31 can scrubber 32 chiller plant 500 ltr / hr 33 ss milk tank 300 ltr 34 ss dump tank 200 ltr 35 water cooler small 36 fat testing machine 37 electric motor 2 hp / 3hp 38 water pump with channel 39 milk pump 3.5hp ss 40 electric motor 20 hp / 25 hp 41 oil drum 42 plastic item 43 refrigerator 44 aluminum cans 45 m.s. gi cans 46 plastic cans 47 air cooler 48 m.s. chamber 49 capacitor ( in the panel ) 50 platform weighing machine digital 51 misc. mild steel and cast iron scrap 1 desco plant 5000 ltr ( m.s. cutter ) 2 bulk cooler 2000 ltr capacity 3 deep freez 100 ltr 4 steel cans 5 electrical panel 6 kirloskar hermitic sealed ref compressor 7 cycle stand with structure 1 desco unit complete ( m.s. cutter ) 2 compressor motor unit, foundation plate, 3 electric panel board 4 steel ladder 5 chiller starter 6 exhaust fans 7 ceiling fans 8 wooden table 9 electric motor supply 10 steel can 11 electric panel in dg room 12 broken chairs wooden 13 30 kva dg set kirlosakr air cooled 1 desco unit compressor, with flundation, with accessories like condensor, 2 electric motors, control panel, air compressor small, inner and outer shell, cooling coil, ss balance, 300 kg ss tank, 1000 l dump tank, weighing machine, and hand driven fat testing machine 2 dg set kirloskar make 30 kva rating 3 cast iron flooring tiles 1 cooling machinery milk chilling plant, ms tank with evaporator coil, expansion valve, milk chilling compressor, with foundation, compressor without motor, condenser, 1 hp electric motor, chilled water pump, 2 hp motor, milk agitator, pressure cut out, electrical panel board, with accessorized 2 dg set 30 kva kirloskar...

Due Date : September 18, 2023

Tender Value : ₹ Ref. Documents

29

Pune Municipal Corporation - Maharashtra

39552925 tender for mechanical bio medical equipments yearly repair and maintenance of pmc various hospital, maternity homes and dispensaries 1 liquid medical oxygen tank ( 13kl, 10kl, 1kl ) 2 oxygen tank pressure regulator 3 tank vaporizer gasket 4 safety wall 5 pressure valve 6 upeer filling valve 7 lower filling valve 8 inlet valve 9 outlet valve 10 taflon seat 11 vapourizer flange taplon seat 12 spool ball valve 13 pressure regulator 14 pressure gauge meter 15 oxygen tank liquid level gauge meter 16 check isolation valve and manifold connection ( ball valve ) 17 regular servicing charges 18 oxygen generation plant ( 2000lpm, 650lpm, 250lpm, 750lpm ) 19 oxygen generator control pannel 20 filter package 21 coal tower 22 air tank 23 psa generator 24 compressed air inlet 25 oxygen gas outlet 26 raw gas storage tank 27 primary booster pump 28 oxygen receiver tank 29 raw oxygen inlet 30 pure oxygen outlet 31 sterilite bacteria filter 32 pressure bar gauge meter 33 main line purity meter 34 purity sensor 35 compressor seperator kit 36 pre filter 37 post filter 38 air / wate seprator filter 39 open and close regulator 40 liquid dura cylinder ( 219 liter, 230liter ) 41 cylinder trolley 42 cylinder trolley wheel ( locking wheel ) 43 vent valve 44 pressure regulating valve 45 liquid in valve 46 pressure built up valve 47 gas use only 48 pressure regulator 49 pressure buil up meter 50 liquid level meter 51 air compressor / vaccum pump piston base 52 pistor ring lp 53 piston ring hp 54 valve packing set lp 55 valve packing set hp 56 seat cylinder 57 grease kit for small end 58 piston pin set lp 59 piston pin set hp 60 filter element c / case 61 check valve kit 62 fllter element intake 63 intake filter set 64 unloader part set 65 cylinder lp 66 cylinder hp+cl 67 piston set lp 68 piston set hp 69 crank shaft set 70 solenoide valve 71 o ring 72 pressure switch 73 pressure gauge 74 oil seal 75 star delta starter fasd 76 air and vaccum pump screw base 77 air filter separator kit 78 bacteria filter 79 noise level 80 crosshead 81 guide bearing 82 oil scraper 83 oil thrower ring 84 stuffing box 85 valve disc 86 diaphram 87 connection rod 88 flywheel 89 valve disc 90 cam 91 clutch 92 minimum prssure valve 93 0il sepeartor vessel 94 oil filter 95 thermostatic bypss valve 96 after cooler 97 oil cooler 98 section filter 99 section valve 100 air heat exachanger 101 water separator 102 dry compress air filter 103 manifold 104 non return valve 105 copper tail pipe 106 flexible tail pipe 107 regulator 108 control pannel 109 pressure gauge with accessories 110 auto sensor 111 pressure shuttle valve 112 auto display 113 lox 14 regulator b18 114 block head pipe 115 cylinder guard 116 controler kit 117 quaterly complete general overall servicing & labor charges 118 o2 flow meter & humidifier bottle 119 brass inlet tube 120 o2 pressure gauge 121 flow control spindle with greep handle 122 flow meter tube assembly 123 repairs to flow meter housing work 124 gauge post replacement 125 flow control unit complete base 126 white metal seat grinding polishing work 127 flow regulating valve 128 pressure regulating valve 129 safety valve 130 screw nut 131 pressure gauge repairs ( boardons tube turming brazing work ) 132 repairs to flow meter base 133 humidifier bottle replacement 134 o2 outlet socket replacement 135 quaterly complete general overall servicing & labor charges 136 oxygen pressure regulator ( single s 1 type ) 137 o2 regulator base replacement 138 02 regulator top cap replacement 139 valve seat grinding and polishing work 140 chromium plating charges work 141 o2 outlet adaptor 142 pressure gauge 143 brass metal valve seat assembly 144 heavy duty inlet tube ( brass ) 145 heavy duty safety valve 146 brass metal seat nut assembly 147 taflon reinforced diaphragm assembly 148 pressure setting spindle 149 pin index adaptor with nylon p. t. hose 150 heavy duty o2 inlet nut 151 quaterly complete general overall servicing & labor charges 152 b.p. apparatus / stand model / wall mode / dial model 153 scale strip locking unit repairs 154 tube connector pair 155 powder coating work 156 scale strip 157 rubber bag 158 cloth bag 159 metal valve with rubber bulb 160 mercury 161 glass tube 162 stand repairs / welding 163 mercury tank lock 164 gauge dal replacement 165 dial gauge housing replacement 166 dial gauge diapharm replacement 167 hair spring replacement 168 dial gauge diapharm repair 169 digital indicator 170 case 171 repairs to pcb unit work 172 pcb unit 173 ic replacement 174 quaterly complete general overall servicing & labor charges 175 patient trolley 176 cushion set 177 trolley bed welding work 178 handle 179 footrest 180 backrest 181 s / s side rails 182 stainess steel frame repair work 183 castor wheel set 184 trolley powder coating work 185 nut / bolt set 186 quaterly complete general overall servicing & labor charges 187 central suction system 188 piston with piston ring set 189 gasket packing 190 compressor oil 191 cylinder boring / sleeving work 192 suction cylinder new 193 cranck new 194 side arm new 195 v belt 196 connecting rod with pin 197 quaterly complete general overall servicing & labor charges 198 e.n.t. drill machine 199 complete motor rewinding work 200 armature with shaft new 201 supply wire set 202 reparis to electric charger unit 203 electric charger unit replacement 204 reparis to motor chuck 205 motor chuck new 206 quaterly complete general overall servicing & labor charges 207 noiseless suction machine 208 motor shaft fitting work 209 repairs to motor front cover with bearing work 210 repairs to motor back cover with bearing work 211 repairs to motor clutch work 212 motor foundation rubber 213 motor cage rotor aluminum brazing and turning 214 motor fan 215 motor rewinding work 216 glass bottle 217 rotor blade 218 moulded rubber lid 219 filter bottle assembly 220 repairs to suction rotor unit work 221 suction pressure gauge panel 222 oil chamber assembly 223 bottle stand 224 bearing 225 suction tubing set 226 oil seal 227 spring 228 non return valve 229 suction roter face plate 230 suction rotor unit 231 repairs to rotor housing unit 232 repairs to suction face plate 233 suction pressure controller replacement 234 complete motor unti replacement 235 quaterly complete general overall servicing & labor charges 236 digital b.p. apparatus 237 ic 238 pcb unit replacement 239 repairs to pcb unit 240 sensor replacement 241 digital meter replacement 242 repairs to digital meter 243 repairs to outer case 244 velero cuff 245 rubber bag 246 metal valve with rubber bulb 247 repairs to motor 248 quaterly complete general overall servicing & labor charges 249 weighing machine ( mechanical / electronic ) 250 spring 251 round gear 252 patti gear 253 dial repairs 254 stay repairs 255 ic 256 condensor 257 digital display repairs 258 motherboard new 259 display new 260 complete repairing & servicing work 261 locking spring 262 patient wheel chair 263 wheel chair sheet repairs ( sheet replacement ) 264 wheel chair back repairs 265 welding work 266 wheel replacement 267 tyre repairs 268 front wheel with yolk repairs 269 front wheel with yolk replacement 270 back / seat cushion 271 cushion repairs 272 quaterly complete general overall servicing & labor charges 273 bed side locker 274 stainless top repairs 275 door repairs 276 welding work 277 wheel repair each 278 frame pipe repairs 279 powder coating work 280 box reparing m.s. sheet welding 281 box door replacement 282 repairs & labour charges 283 fowller bed 284 powder coating work 285 welding work 286 ms. sheet replacement 287 repairs to gear rod work 288 repairs to lifting arm work 289 castor whecl replacement ( complete set ) 290 bed cushion set replacement 291 bed cushion repairs 292 gear pipe welding machining / rethreading work 293 castor wheel replacement. 294 quaterly complete general overall servicing & labor charges 295 emergency patient trolley with hyd. pump & oxygen stand 296 wheel with yolk complete set 297 trolley top sheet replacement ( m.s. ) 298 trolley top sheet replacement ( s.s ) 299 trolley powder coating work 300 trolley cushion 301 repairs to gear rod work 302 lifting lever 303 remote control unit repairs 304 remote control unit replacement 305 repairs to bed cushion 306 welding charges for trolley unit 307 repairs to hydraulic pump 308 repairs to oxygen trolley unit 309 pump paddle repairs work 310 repairs to hydraulic telescopic pump unit work 311 quaterly complete general overall servicing & labor charges 312 instrument trolley 313 s. s. tray 314 m.s. tray 315 trolley repairs ( s.s. welding ) 316 m.s. welding 317 wheel with yolk 318 trolley powder coating work 319 wheel with yolk 320 height setting screw with greep handle 321 drilling and nut welding work 322 instrument repairs and polishing. 323 quaterly complete general overall servicing & labor charges 324 centrifugal apparatus 325 repairs to motor top cover with bearing 326 repairs to motor bottom cover with bearing 327 repairs to field coil housing unit 328 armature shaft replacement ( repairs ) 329 commutator replacement work 330 motor top / bottam cap brazing / turing / threading for carbon brush fitting work 331 armature replacement 332 digital revolution display meter 333 repairs to test tube bucket holder unit 334 bearing 335 carbon brushes 336 speed control regulator ( set ) for bucket type 337 rewiring for centrifuge machine. 338 motor housing ( foundation rubber ) 339 field coil winding work 340 motor 341 electronic speed control regulator or bell pot 342 digital timer unit. 343 repairs to digital r.p.m. meter 344 nut bolt washer set 345 test tube bucket holder ring 346 on / off switch 347 repairs to machine top cover 348 repairs to centrifuge chamber 349 heavy duty imported bearing 350 test tube bucket holder complete unit replacement 351 pcb unit repairs 352 ic replacement 353 sensor replacement 354 repairs to lid locking system 355 repairs to digital revolution display meter 356 repairs to digital timer 357 moulded casting plate for motor housing 358 repairs to moulded casting plate 359 quaterly complete general overall servicing & labor charges 360 vaccume cleaner 361 motor rewinding charges work 362 filter unit repairs work 363 motor 364 vacuume chamber 365 electronic circuit board pcb repairs work 366 i.c. 367 supply wire set 368 nut bolt washer set 369 corrugated vaccume pipe 370 pipe fitting accessories 371 wire housing plate 372 repairs to pcb unit 373 repairs to suction unit 374 sensor replacement 375 repairs to electric motor work 376 quaterly complete general overall servicing & labor charges 377 floor cleaning machine 378 electric motor 379 electric motor rewinding 380 machine trolley 381 cleaning brush 382 rotor shaft fitting 383 motor case repairing work 384 supply wire set 385 welding work 386 gasket 387 quaterly complete general overall servicing & labor charges 388 distill water plant 389 boiler chamber packing 390 s. s. orgon welding for condenser 391 wiring set 392 water outlet pipe s. s. 393 water control valve imported ball seat type 394 heating element isi mark 395 glass tube 396 condenser repairs work 397 boiler chamber brazing per inch 398 boiler chamber 399 stainless steel boiler chamber with element pipe 400 s.s. nut bolt and washer set 401 isi mark double tube copper pipe hdhe 402 orgon welding charges.for boiler chamber 403 quaterly complete general overall servicing & labor charges 404 dental chair 405 compressor oil 406 oil immersed compressor new 407 oil free compressor new 408 compressor capacity new 409 compressor filter new 410 compressor auto switch new 411 compressor drain key new 412 compressor nrv new 413 chair water controller new 414 solonide valve new 415 air regulator new 416 air rotor new 417 air rotor catriage new 418 heavy duty air pipe new 4x2 mm size 419 connector tube 4x2 mm size 420 bottle cap new 421 micro motor new 422 dental chair p.c.b new 423 air rotor tubing new 424 three way tubing new 425 three way serienge new 426 1x2 selector new 427 air on / off switch new 428 pilot valve new 429 atabilizer 3 kva x 50 watt 430 air tube silicon per meter new 431 air tube p.v per meter new 432 dental chair bottle new 433 dental chair water filter new 434 dental chair rubber mat new 435 dental chair suction block new 436 x ray machine tube new 437 x ray machine jet new 438 cpmplete dental chair painting work 439 dental chair led light sensor new 440 dental chair light new 441 dental chair cushion new 442 dental chair lamination work 443 dental chair foot switch new 444 scaler wood peaker vdsp new 445 micro meter 446 suction motor complete repairs 447 dental chair gauge new 448 chair handle new 449 chair up / down motor new 450 chair up / down motor repairsnew 451 dental chair x ray vieuwer 452 uv chamber 453 cuff link 454 central oxygen pannel 455 heavy duty jumbo type oxygen pressure regulator 456 repairs to jumbo type oxygen pressure regulator unit work 457 heavy duty 4 inch dial oxygen pressure gauge 458 repairs to heavy duty4 inch dial oxygen pressure gauge work 459 repairs to step down oxygen pressure regulator. 460 oxygen cylinder connecting pipe line unit new 461 repairs to oxygen cylinder connector pipe line unit. 462 step down pressure regulator new. 463 repairs to copper pipe line within unit 464 quaterly complete general overall servicing & labor charges 465 nitrous oxide pressure regulator 466 n2o regulator base replacements 467 n2o regulator top cap replacements 468 valve seat grinding and polishing work 469 chromium plating work 470 n20 outlet adaptor 471 pressure gauge 472 brass metal valve seat assembly 473 heavy duty inlet tube ( brass ) 474 heavy duty safety valve 475 brass metal seat nut assembly 476 taplon reinforced diaphragm assembly 477 pressure setting spindle 478 pin index adaptor with nylon p. t. hose 479 heavy duty n20 inlet nut 480 quaterly complete general overall servicing & labor charges 481 oxygen flow meter wall mounting type ( central oxygen flow meter ) 482 wall mounted flow meter metal unit 483 double tube type flow meter tube 484 humidifier bottle 485 flow control unit repairs work 486 quaterly complete general overall servicing & labor charges 487 0.t.instruments 488 sharpning charges. 489 hinges repairing. 490 polishing and buffing charges. 491 repairs and labour charges. 492 exahust fan 493 compleat motor rewinding work 494 fan new. 495 bearings new. 496 motor shaft new. 497 mounting frame replacement work 498 wiring charges. 499 quaterly complete general overall servicing & labor charges 500 twin model shadowless lamp modification for halogen conversion 501 dome mdification ie. base plate replacement for led focus lamp fitting 502 complete wiring new. 503 led focus lamp. 504 smps unit new. 505 modification chares. 506 quaterly complete general overall servicing & labor charges 507 multi bulb shadow lamp ( ceiling type ) ( halogen bulb type ) 508 shadowless lamp glass ( small ) 509 light control regulator for regular bulb ( standard ) repairs 510 light control regular for halogen bulb ( standard ) 511 transfornmer for halogen bulb ( standard ) 512 transformer for regular bulb ( standard ) repairs 513 lamp wiring charges ( standard wire ) 514 halogen bulb single wire 515 shadowless lamp glass ( big size ) 516 shadowless lamp halogen blub pin type 517 toughen filter sereen ( for multi bulb type lamp ) 518 position setting washer 519 repairs to icr for regular bulb h. d. copper work 520 repairs to icr for halogen bulbs h. d. copper work 521 repairs to position setting lock work 522 toroid trf unit for halogen bulbs h. d. copper 523 toroid trf unit for regular blubs h. d. copper 524 shadowless lamp dome repairs 525 heat exhaust fan 526 repairs to transformer copper wire 527 fiber glass wiring 528 halogen lamp focus assembly set repairs 529 bearing 530 bulb holder 531 imported halogen lamp ( without focus ) 532 imported halogen lamp ( with focus ) 533 toughen glass ( for regular type lamps ) for big size lamp 534 conventional bulb 24 v / 36w 535 dome polishing work 536 self balancing unit 537 spring 538 taflon washer set 539 glass holder ring 540 dome polishing ( job work ) 541 self balancing unit 542 spring 543 nylon washer set 544 glass holder ring 545 repairs to dome holder c clamp ( job work ) 546 dome replacement 547 quaterly complete general overall servicing & labor charges 548 noiseless suction pump ( pump type oil immersed ) 549 compressor unit 550 vaccume valve unit reparing work 551 vaccume plate reparing work 552 piston unit reparing work 553 compressor motor rewinding work 554 compressor relay 555 compressor oil 556 suction tubing set 557 glass bottle 558 rubber lid 559 filer bottle assembly 560 suction nozzle 561 supply wire set 562 on / off knob 563 indicator bulb 564 wooden cabinate replacement 565 m.s. cabinate replacement 566 s.s. cabinate replacement 567 quaterly complete general overall servicing & labor charges 568 foot operated suction pump 569 glass bottle ( small ) 570 suction cylinder 571 piston 572 non return valve 573 spring holder clamp ( for foot suction ) 574 suction tubing set 575 suction pressure gauge 576 glass bottle ( 2 liter size ) 577 bottle lid 578 quaterly complete general overall servicing & labor charges 579 twin model type s.l. light 580 dome polishing work 581 smps box 582 position setting clamp repairs 583 imported halogen bulb without focus 584 toughen glass with gasket 585 bearing 586 toride trf unit for halogen bulb 587 shadowless lamp dome 588 imodification charges for halogen conversion work 589 lamp wiring charges 590 heat exhaust fan 591 repairs to smps unit work 592 lamp holding assembly repairs 593 vertical post welding / machining / rethrcading work 594 revolving connector repairing work 595 repairs to height / focus setting assembly work 596 led lanmp fitting 597 smps fitting 598 high density l.e. d. bulb new. 599 repairs to smps unit 600 quaterly complete general overall servicing & labor charges 601 single drum autoclave 602 steam release valve 603 steam pressure gauge 604 steam pressure gasket 605 safety valve 606 locking stud clamp brazing work 607 locking stud ( s.s ) with pin 608 heating element kettle type 609 heating element industrial type isi mark 610 drum stand with chamber 611 brass metal lid locking unit with backlite round knobs 612 repairs to autoclave lid work 613 locking stud locking pin ( m.s. ) 614 steam release valve locking knob 615 brazing charges ( argon welding for body ) per inch work 616 drum stand 617 backlite lid locking knob 618 outer drum stand 619 metal wing nut ( m.s. ) 620 isi mark double tube copper pipe hdhe 621 element socket fitting job work 622 repairs to steame pressur gauge 623 repairs to locking stud 624 repairs to drum stand 625 brass metal wing nut repairs 626 quaterly complete general overall servicing & labor charges 627 anesthesia machine 628 rotameter base 629 repairs to o2 / n20 control spindle work 630 goldman vaporizer drum repairs work 631 goldman vaporizer assembly 632 goldman vaporizer electroplating charges 633 emergency o2 release valve silver brazing turning / rethreading charges work 634 02 / n20 outlet socket fitting with bushing work 635 back bar assembly safety valve spindle repairs 636 back bar assembly safety valve seat repairs 637 o2 / n20 regulator base replacement 638 o2 / n20 regulator cap replacement 639 o2 / n20 cylinder yolk brazing / turning chromium plating work 640 o2 / n20 yolk mounting hardened nut / bolt set fitting work 641 emergency o2 and close circuit converter unit silver brazing 642 vapouriser machining and control drum repairs work 643 valve seat assembly 644 trilene vaporiser 645 stainless steel drawer 646 stainless steel over head tray with s. s. stand 647 seal bodok washer 648 safety valve 649 rotameter unit for mark iv type machine 650 rotameter unit for major model machine 651 retaining strip with bolt 652 rebreathing bag 653 pressure gauge 654 powder quoting for machine 655 oxygen pressure reducing valve 656 o2 or n20 cylinder yolk 657 nylon reinforced diaphragm 658 nitruous oxide or oxygen pipeline 659 n2o ( nitrous oxide ) pressure reducing valve 660 m. s. machine frame 661 m. s. drawer 662 goldman vaporizer unit replacement 663 gauge post 664 repairs to emergency 02 unit 665 corrugated tube 666 chromium plating charges 667 caster wheel ( hcavy duty ) 668 bains circuit 669 s.s. machine frame / trolley 670 veporiser dummy pipe 671 02 / n20 rotameter pipe 672 isofluorine veporiser 673 02 / n20 regulator cap brazing machining & chromium plating ( job work ) 674 02 / n20 regulator basc brazing machining & chromium plating ( job work ) 675 repairs to rotameter unit 676 i ) oxygen port repairs 677 ii ) n2o port repairs 678 repairs to o2 / n2o cylinder yolk ( job work ) 679 oxygen inlet tube replacement 680 brass metal seat nut assembly ( for regulator ) 681 repairs to pnucmatic pipc linc connector 682 pnumaatic pipc line for o2 or n20 683 quaterly complete general overall servicing & labor charges 684 autoclave dressing drum 685 copper riveting charges 686 top / bottom lid 687 hinges repairing. 688 drums reshaping charges 689 repairs to drum belt 690 drum repairs charges 691 hot water boiler / geyser 692 vaccume valve ( racold type ) 693 thermostat 694 heating element 695 gasket set 696 dead weight valve 697 brazing charges per round work 698 boiler unit new fitting 699 boiler chamber ( copper ) 700 base plate with pipe 701 copper / brass nut bolt 702 connector pipe heavy duty 703 geyser mounting and fitting charges 704 indicator lamp 705 repairs to base plate unit work 706 base plate fitting clamp 707 quaterly complete general overall servicing & labor charges 708 laryngoscope 709 bulb holder pipe replacement 710 blade repairs 711 handle repairs 712 blade / handle soldering 713 contact point holder repairs 714 blub 715 plaster cutter 716 motor rewinding charges 717 armature with shaft new 718 field winding charges 719 cutter blade unit retoothing work 720 repairs to motor case work 721 on / off switch 722 supply wire set 723 repairs to rotation control guide unit work 724 quaterly complete general overall servicing & labor charges 725 ortho bone drill machine 726 complete motor rewinding work 727 armature with shaft new 728 supply wire set 729 electric charger unit 730 motor chuck new 731 repairs to motor chuck 732 repairs to electric charger unit 733 quaterly complete general overall servicing & labor charges 734 h.h.p. / vacuum compound ( st. filter ) type steri. machine. 735 water inlet valve ( stainless type ) ( imported ball type ) 736 water inletvalve ( brass type ) 737 vacuum valve unit replacement 738 vacuum valve unit repairs work 739 steam pressure switch 740 steam pressure gauge with post 741 steam chamber packing 742 steam pressure door gasket 743 steam out let drain pipe 744 stcam non return valve 745 repairs charges for steam control valve unit work 746 steam control valve machining work 747 stainless steel locking road plate 748 main outer jacket brazing per round 749 locking rod housing bushing & machining work 750 locking plate diaphragm 751 lid locking assembly housing stud replacement. work 752 lid holding bracket repairs 753 isi mark double tube copper pipe hdhe 754 inner steam chamber orgon brazing per round work 755 imported timer 756 electro magnetic contractor 757 earthing probe 758 dead weight valve 759 boiler plate with element socket ( stainless steel ) 760 boiler plate with element socket ( brass metal ) 761 boiler chamber connecting pipe. 762 water level tube with ruber bushing 763 temperature gauge 764 temperature gauge housing complete unit with pipe 765 steam pressure safety valve 766 steam control valve outlet pipe repairs 767 safety valve housing brazing work 768 boiler plate gasket 769 glass wool for insulation 770 electric circuit valve 771 steam pressure locking rod 772 lid locking rod handle with backline knob 773 locking plate gasket ( allied ) 774 ss. nut bolts for boiler plate 775 s.s. shect cover for glass wool insulation 776 lid locking assembly complete unit with threaded housing stud ( replacement ) work 777 complete boiler chamber replacement with single plate system 778 elcctronic water level switch fitting 779 heavy steam trap replacement 780 vacuum valve sockct brazing work 781 pressure gauge body mounted socket brazing work 782 safety valve body mountcd socket brazing work 783 lead locking rod ( square ) replacement ( cach ) 784 lid locking rod housing unit 785 boiler plate gasket 786 repairs to water lavcl switch 787 orgon wclding charges for boiler chamber per round 788 orgon wclding charges for steam chamber 789 repairs to steam trap unit work 790 welding for autoclave chamber structure pipe repla. etc work 791 powder coating charges for chamber structure 792 steam pressure switch repairs work 793 i ) contact switch repairs 794 ii ) pressure switch diapharm unit repairs 795 iii ) repairs to pressure balancing rod 796 repairs to elctro magnetic contactor unit work 797 i ) contact point repairs / decarbing / polishing 798 ii ) repairs to e shapcd electro magnctic starmping unit 799 iii ) repairs to electro magnetic coil 800 repairs to stainless stecl locking rod plate work 801 door locking ( daipharm plate ) housing s.s. nut bot set 802 door locking ( daipharm plate ) repairs 803 quaterly complete general overall servicing & labor charges 804 h. h. p. sterilize modification for double circuit ( i.e. modification for double boiler plate system ) with t. c. mechanism 805 steam pressure switch 806 pressure switch connccting pipc 807 modification & labour charges 808 mechanical timer 809 heavy duty hcating flemcnt [ double pipc copper tube type 3 k w. 810 electro magnetic contractor 811 electrical circuit box 812 earthling probe 813 boiler plate with element socket ( stainless steel ) 814 boiler plate with element socket ( brass ) 815 boiler plate gasket 816 boiler plate fitting clamp brazing for boiler chamber 817 water level control unit 818 supply wire set 819 boiler plate clamp replacement ( i.e. modification ) work 820 complete boiler chamber replacement ( double plate boiler chamber ) 821 water level switch fitting for modified plate system 822 2 way electrical switch gear fitting 823 electrical ckt. box along with pressure switch / electromagnetic contactor & time relay switch for modified system. 824 tunicate pump 825 pump unit 826 pressure gauge 827 release valve repairs 828 rubber bag ( important ) 829 rubber bag reparing ( moulding ) 830 velcro cuff imported 831 velcro cuff repairs 832 connector 833 mobilux theatre light 834 c clamp with pipe repairs work 835 c clamp height setting lock repairs work 836 powder coating work 837 m. s. moulded star type stand. brazing work 838 wiring set ( fiber glass wire ) 839 wheels set each 840 transformer replacemnt 841 toughen glass 842 imported halogen bulb 843 dome polishing work 844 cooling fan 845 glass fitting clamp 846 reflector 847 reflector clamp repairs work 848 modification for fitting of cooling fan work 849 repairs to electrical transformer 850 repairs to focus balancing unit 851 vertical post welding / turning / thearding work 852 quaterly complete general overall servicing & labor charges 853 electric traction machine 854 wiring set 855 transformer replacement 856 tension cord 857 sensor beep 858 p.c.b. board unit 859 outer cover 860 motor shaft 861 motor repairing work 862 i.c. 863 gear replacement 864 digital timer replacement 865 transformer reparing charges 866 repairs to pcb board unit 867 outer cover powder coating 868 gear repairs charges work 869 repairs to degital timer 870 quaterly complete general overall servicing & labor charges 871 portable type side lamp ( multi bulb shadowless lamp ) surgical lamp ( halogen bulb type ) 872 halogen bulb non projection type 873 halogen bulb projection type 874 wheel 875 toughen glass 876 supply wire set 877 repairs to glass fitting clamp work 878 repairs to bulb holder clamp work 879 reapirs to heat exhaust fan work 880 reflector dome polishing work 881 outer dome 882 modification for double bub system labour charges 883 side lamp stand with wheel 884 dome holder c clamp 885 repairs to lamp height setting mechanism 886 repairs to dome holder clamp 887 quaterly complete general overall servicing & labor charges 888 s. p. double conpound type steri. chamber ( double drum autoclave ) 889 steam chamber spot brazing orgon wielding per inch work 890 metal wing nut brass metal with round knob 891 water level tube ( with rubber bushing ) 892 supply wire set regular wire 893 steam pressure gasket 894 heating element single tube brass type isi 895 hex button type relcase valve / drain valve / inlet valve 896 level tube holder brass bush fitting work 897 steam pressure gauge 898 steam pressure safcty valve 899 boiler chamber brazing ( right round ) per round work 900 repairs to steam chamber conncctor pipe work 901 steam release valve ( h. d. ) 902 electrical contractor type i 903 electrical contractor type ii 904 pressure switch connecting socket ( s. s. ) 905 m.s. wing nuts with bakelite handle 906 fiber glass supply wire set 907 boiler neck soldering per feet 908 imported electrical timer 909 pressure gasket for three drum autoclave 910 lid locking clamp brazing work 911 isi mark double tube copper pipe h. d. h. e. 912 water inlet valve ( regular ) 913 water inlet valve ( spindle type ) 914 water inlet valve ( imported ball type ) 915 electrical circuit box s. s. 916 pressure switch connecting socket ( brass ) 917 steam pressure switch 918 steam pressure gauge ( heavy duty copper pipe ) 919 steam pressure safety valve ( heavy duty ) 920 stainless steel outer jacket 921 repairs to steam chamber bottom work 922 boiler chamber replacement 923 lid locking key h. d. brass metal 924 lead locking bolts ( s.s ) 925 lead locking bolts ( m.s. ) 926 asbestos washer 927 3 / 16* bsw screw set 928 water drain valve fitting 929 heavy duty brass moulded lid 930 sandwich metal lid ( m.s. / s.s. ) 931 level tube cage new 932 level tube holder 933 steam chamber replacement 934 repairs to boiler chamber collar work 935 m. s. moulded leg 936 repairs to asbestos sheet inside lining for outer jacket 937 chromium plating charges for autoclave spares 938 gauge post 939 boiler chamber bottom replacement ( brass / copper ) 940 level tube holder socket fitting work 941 boiler chamber bottom replacement ( s. s. ) 942 boiler chamber collar replacement ( s.s. ) 943 repairs to autoclave lid work 944 stainless steel element socket welding for boiler chamber work 945 repairs to brass metal wing nut 946 lid locking bolt repairs 947 repairs to element socket 948 quaterly complete general overall servicing & labor charges 949 s. p. double compound type steri. chamber modification for automatic steam pressure control system with timer arrangement. 950 boiler chamber brazing 951 steam chamber connector pipe 952 steam release valve 953 electrical contactor 954 pressure switch connecting socket ( s. s. ) 955 m. s. wing nuts with bakelite handle 956 brass metal wing nuts with round knobs 957 water level tube with rubber bushing 958 supply wire set 959 boiler neck soldering work 960 imported electrical timer 961 pressure gasket for three drum autoclave 962 steam pressure gasket ( regular ) 963 steam pressure gasket ( viton ) 964 steam pressure gasket ( neoprene ) 965 steam pressure gasket ( silicon ) 966 water inlet valve ( regular ) 967 water inlet valve ( spindle type ) 968 water inlet valve ( imported ball type ) 969 electrical circuit box 970 electrical wiring set ( for modified type auto calve ) 971 pressure switch connecting socket brazing ( brass ) work 972 steam pressure switch 973 steam pressure gauge 974 steam pressure safety valve ( heavy duty ) 975 steam pressure safety valve ( regular ) 976 stainless steel outer jacket 977 electroplating charges for metal parts 978 modification charges for automatic steam pressure control system. 979 3kw isi mark heating element 980 boiler chamber replacement 981 asbestos sheet linning 982 water level tube brass sleeve bush fitting work 983 back light round knob for wing nut 984 quaterly complete general overall servicing & labor charges 985 v.d.r.l. rotator v.d.shekar unit. 986 wire connector 987 v belt 988 transformer replacement 989 top plate 990 motor rewinding 991 motor replacement 992 gear 993 digital timer 994 bearing 995 armature shaft fitting work 996 v grooved pulley 997 motor top cover with bearing 998 field coil housing 999 repairs to motor base cap with bearing work 1000 armature shaft fitting work 1001 motor commutator replacement 1002 pan bracket unit with bearing 1003 speed control regulator 1004 transformer repairs work 1005 motor shaft guide bush fitting work 1006 top pan holder clamp repairs work 1007 nut bolt set each 1008 quaterly complete general overall servicing & labor charges 1009 steri. chamber waterbath type 1010 tray repairs work 1011 drain tap 1012 silver brazing work 1013 soldering work 1014 lid hinges fitting 1015 supply wire set 1016 heating element kettle type 3 kw ( isi ) 1017 heating element industrial type 3 kw doub. copper pipe ( isi ) 1018 heating element industrial type 3 kw single copper pipe ( 1si ) 1019 wire with three pin top set 1020 thermostat reparing work 1021 perforated tray 1022 tray lifting lever reparing work 1023 lid handle backlite 1024 water drain tap 1025 backlight lid handle reparing work 1026 silver brazing charges for chamber per spot work 1027 complete general overall servicing & labor charges 1028 m.p. controlled spdc type steri. chamber with tcpc system 1029 digital pressure & temperature controller unit repairs 1030 digital pressure and temperature controller unit replacement 1031 chamber spot brazing 1032 metal wing nut 1033 water level tube 1034 supply wire set regular wire 1035 steam pressure gasket 1036 heating element single tube brass type isi 1037 hex button type release valve / drain valve / inlet valve 1038 level tube bushing 1039 steam pressure gauge 1040 steam pressure safety valve 1041 boiler chamber brazing ( right round ) per round 1042 steam chamber connector pipe ( h. d. copper ) 1043 steam release valve ( h. d. ) 1044 electrical contractor type i 1045 electrical contractor type ii 1046 pressure switch connecting socket ( s. s. ) 1047 m. s. wing nuts with bakelite handle 1048 fiber glass supply wire set 1049 boiler neck soldering per feet 1050 imported electrical timer 1051 pressure gasket for three drum autoclave 1052 lid locking clamp 1053 isi mark double tube copper pipe h. d. h. e. 1054 water inlet valve ( regular ) 1055 water inlet valve ( spindle type ) 1056 water inlet valve ( imported ball type ) 1057 electrical circuit box s. s. 1058 pressure switch connecting socket ( brass ) 1059 steam pressure switch 1060 steam pressure gauge ( heavy duty copper pipe ) 1061 steam pressure safety valve ( heavy duty copper ) 1062 stainless steel outer jacket 1063 steam chamber bottom replacement 1064 boiler chamber replacement 1065 lid locking key h. d. brass metal 1066 lead locking bolts ( s.s. ) 1067 lead locking bolts ( m.s. ) 1068 asbestos washer 1069 3 / 16 bsw screw set 1070 water drain valve fitting 1071 heavy duty brass moulded lid 1072 heavy duty s. s. moulded lid 1073 sandwich metal lid ( m.s. / s.s. ) 1074 level tube cage new 1075 level tube holder 1076 steam chamber replacement 1077 boiler chamber collar replacement ( brass ) 1078 m.s. moulded leg 1079 asbestos sheet inside lining for outer jacket 1080 chromium plating charges for autoclave spares 1081 gauge post 1082 boiler chamber bottom replacement ( brass / copper ) 1083 level tube holder socket replacement 1084 boiler chamber bottom replacement ( s. s. ) 1085 boiler chamber collar replacement ( s.s. ) 1086 quaterly complete general overall servicing & labor charges 1087 high density shadow less lamp ( led type ) ( ceiling mounting type. ) 1088 repairs to position setting unit 1089 led bulb imported type 1090 smps control unit 1091 pcb unit for intensity & colour control 1092 repairs to c clamp with arm work 1093 repairs to revolving holder work 1094 smps repairs 1095 repairs to led dom work 1096 i.c. replacment. 1097 sensor replacement 1098 intensity control pcb repairs 1099 colour control pcb repairs 1100 intensity control i.c. replacement 1101 quaterly complete general overall servicing & labor charges 1102 tissue floating bath 1103 anodiesed coating work 1104 reparis to water bath tub 1105 electric heating elevent 1106 themostate sensor replacement 1107 themostate sensor repairs 1108 glass wool replacement 1109 p.c.b. unit repairs 1110 wiring kit new 1111 complete general overall servicing & labor charges 1112 replacement to electric heating element 1113 multi bulb / single bulb type portable led shadowless lamp 1114 high density l.e.d. bulb new. 1115 wheel 1116 toughen glass 1117 supply wire set 1118 repairs to glass fitting clamp work 1119 repairs to bulb holder plate work 1120 repairs to heat exhaust fan work 1121 reflector dome polishing work 1122 repairs to p.c.b. unit 1123 i.c new 1124 repairs to intensity controll regulator 1125 repairs to colour cotroll regulator. 1126 smps unit new. 1127 repairs to smps unit 1128 quaterly complete general overall servicing & labor charges 1129 laboratory incubator 1130 heating element 1131 convertor control switch 1132 repairs to control switch 1133 replacement to heating elements 1134 repairs to p.c. b. unit 1135 repairs to thermostate unit 1136 quaterly complete general overall servicing & labor charges 1137 0.t. table with hydraulic jack. 1138 electro plating work 1139 repairs to gear ( m.s. ) brazing machining work 1140 repairs to gear ( g.m. type ) brazing machining work 1141 piston machining work 1142 piston cylinder brazing & machining work 1143 hydraulic oil 1144 gasket ( natural rubber ) 1145 piston spring 1146 non return valve brazing & machining work 1147 powder coating work 1148 repairs to bevel gear brazing machining work 1149 kidney bridge assembly 1150 u foam bed cushion set 1151 head rest 1152 head low gear ( square ) rod 1153 gun metal worm gear 1154 lithotomy bracket 1155 side strip 1156 nut bolt washer set 1157 handle 1158 spur gear ( m.s. ) 1159 tapper hardend gear housing pin 1160 gear box 1161 gear housing rod repairs work 1162 tilt position gear / swivel gear 1163 arm rest repairs work 1164 screening curtain holder repairs work 1165 screening rod repairs work 1166 greep handle locking screw 1167 bearing ( standard ) 1168 gear housing washer 1169 kidney bridge worm gear ( g.m. ) 1170 spur gear ( g. m. ) 1171 thrust bearing ( imported ) 1172 hydraulic pump unit 1173 oil chamber ( bottom ) replacement 1174 heavy duty castor wheel set with yolk 1175 swivel lock ( repairs job work ) 1176 lifting paddle unit 1177 lifting jack welding machining work 1178 lifting jack drilling threading repairs work 1179 repairs to tilt position gear 1180 complete s.s. sheet replacemnt for bed 1181 welding & repairs to bed structure 1182 repairs to head low / head up gear box 1183 repairs to gun metal spur gear brazing / machining / retoothing etc. work 1184 repairs to bed cushion set work 1185 repairs to tilt position / swivel gear work 1186 repairs to hydraulic pump unit / brazing / machining / sand grindingpolishing hydraulic pressure testing etc. work 1187 level setting bolt / brazing / machining & rethreadingwork 1188 level setting greep handle 1189 central jack sand polishing / granding work 1190 pump piston head plate work 1191 castor wheel without yolk 1192 table bed rotation setting locking unit 1193 u foam bed cushion repairs 1194 screening curtain holder bracket 1195 bed cushion locking bracket 1196 lithotomy adjustable leg rest cushion 1197 repairs to oil chamber assembly work 1198 quaterly complete general overall servicing and labour charges 1199 motorised / electric operation table 1200 electronic p.c.b. kit 1201 repairs to remote control unit work 1202 electric motor replacement 1203 repairs to electric motor work 1204 repairs to bed cushion set work 1205 repairs to level setting greep handle 1206 i.c.new. 1207 electro plating work 1208 repairs to screening curtain holder work 1209 welding & repairs to bed structure work 1210 level seting bolu brazing / machining & rethreading work 1211 complete s.s. sheet replacement for table foundation bed 1212 bearing new. 1213 repairs to lithotomy bracket 1214 side strip 1215 nut bolt washer set 1216 lithotomny bracket new 1217 quaterly complete general overall servicing & labor charges 1218 0.t. fumigation machine / fogger macnine 1219 armature rewinding work 1220 backlite base plate repairs work 1221 base plate housing repairs work 1222 fan 1223 imported type bearing 1224 indian bearing 1225 arnature shaft fitting work 1226 motor 1227 bakelite body holder stay 1228 repairs to stainless steel tray with wheels 1229 wire with three pin plug ( set ) 1230 s.s. bolt washer set 1231 p.v.c. cone 1232 repairs to motor housing chamber work 1233 aluminum body holder stay repairs work 1234 motor lop cover with bearing welding & repairs work 1235 motor bottom cover with bearing welding & repairs work 1236 field coil housing unit 1237 suction control valve 1238 suction clamp unit 1239 inlet funnel 1240 chamber gasket 1241 digital timer unit. 1242 repairs to digital timer 1243 mechanical timer unit 1244 supply wire set 1245 quaterly complete general overall servicing & labor charges 1246 modular o.t pendent for oxygen / nitrous oxide / vaccume air.etc 1247 o.t pendent cleaning and sanitazing 1248 o.t pendent ceiling fitting bracket 1249 fasner and nut bolt 1250 oxygen port repairing 1251 vaccume port repairing 1252 air port repairing 1253 nitrogen port repairing 1254 high pressure numatic pipe 1255 oxygen port adaptor new 1256 modification fitting of extra gas delivery port 1257 250 volts / 24 volts dc rectifier transformer new 1258 quaterly complete general overall servicing & labor charges 1259 refrigerator 1260 compressor gas charging 1261 compressor replacement ( new ) 1262 thermosate replacement 1263 wiering set new 1264 tray new 1265 condensor new 1266 refrigerator ( bulb ) light replacement 1267 quaterly complete general overall servicing & labor charges 1268 water fillter 1269 filter candle new 1270 pvc pipeline kit new 1271 pcb board replacement 1272 pcb board repairs 1273 quaterly complete general overall servicing & labor charges 1274 water cooler 1275 compressor gas charging 1276 compressor replacement ( new ) 1277 thermosate replacement 1278 condensor new 1279 fan motor new 1280 plumbing socket new 1281 pvc pipeline kit new 1282 water tap new 1283 s.s drain tray replacement 1284 stainless steel chamber replacement 1285 copper pipeline cobdensor replacement 1286 quaterly complete general overall servicing & labor charges 1287 washing machine 1288 pcb board replacement 1289 pcb board repairs 1290 electric motor rewinding 1291 electric motor replacement 1292 complete wiring kit new 1293 wash drum repairs 1294 bearing replacement 1295 v belt new 1296 water tap new 1297 water inlet pipe set new 1298 wash drum moniting assembly new 1299 quaterly complete general overall servicing & labor charges...

Due Date : September 18, 2023

Tender Value : ₹ 55 Lakhs

30

Municipal Council - Maharashtra

39538590 procurement of fire fighting equipments for municipal council gondia , pneumatic lifting airbags , ventilating fan , complete set of battery operated combl tool for cutting and spreading & ram , flood light , reciprocating saw , rotating saw , auto jack , first aid medical outfit for 15 persons , dewatering pump , chemical protective suit level a , chemical protective suit level b , emergency respirator hood with cartridges / filters , set of manhole cover lifting hooks , fall arrester with 36 meter cable with kevlar harness , portable inflatable tent , 16. drill machine electric driven with impact facilities , low pressure lifting airbag , water and flood rescue equipment , vise grip , mechanical tools , chisel for concrete small , chisel for concrete big , round shovel , spade shovel , crow bar small , crow bar big , pick mattock , hack saw , hand saw , claw hammer , sledge hammer big , sledge hammer small , brick hammer , mega phone , combat knife , multi gas detector , spades , mattocks with handle , pick axe with handle , crow bar 1 meter long , sledge hammer 5kg , rake 3 prong , rubbergloves 25000 volts , mat rubber large , emergency respirator 15 minute duration of reputed make specification , driver knife , drilling machine bosch make 230 v , nylon rope three standhawser laid size 50mm circumferences 30 m with breaking load 5.3 ton , inflatable rescue platform , jumping cushions , water mists system complete with complete hydraulic distribution system , life detector , acoustic based victim location unit...

Due Date : September 15, 2023

Tender Value : ₹ Ref. Documents

31

Rural Development Department - Maharashtra

39535439 provide tractor trolley for grampanchayt rajapur tal yeola dist nashik , outer dimensions 8 x 5 x 1.5 feet, main chassis ( mm ) 75 x 40, floor sheet ( mm ) 3, side wall sheet ( mm ) 3, tyre 6.00 x 16, ring hitch dia. ( mm ) 32, hyd. jack capacity ( ton ) 3, axle ( mm ) 30209 ( in & out ) axle bearing weight ( kgs. ) 635, require hp 15+...

Due Date : September 12, 2023

Tender Value : ₹ Ref. Documents

32

Directorate Of Technical Education - Maharashtra

39533218 bids are invited for supply of laboratory equipments electrical analogy for flow net , joules experiment set up , temperature sensors , box spanner set , table mounted bench vice , digital vernier caliper , deadweight pressure gauge tester , strain gauges for determination of modulus of elasticity , gear thooth vernier caliper , models of pipe fittings , desktop computer with iot based system to operate hydraulic or pneumatic circuits , test set up for stress and strain measurement , test set up for bending of cantiliverorsimply supported beam , epicyclic gear train test rig , set up for gear generation with rack as cutter , model of contineous variable transmission cvt , sound level meter , lux meter , air conditioning test rig including heating, cooling, humidification, dehumidification process system , torque converter working model. , cam jump apparatus , ampere cable , holding torque apparatus , nozzle tester , new two wheeler for on road fuel consumption test rig , compression gauge with varous sizes adapters for a wide number of vehicles spark plug typesordepths , cut section model of rotary compressor , model of air cooled forced convection coiled condenser , tools trolley 5 drawers , battery 12v,70ah , hydraulic jack 5 ton, trolly type , aorc leak detector , car washer , combined auto part tester , clutch diaphragm type , standard coil spring type clutch , double disc clutch , standard bore guage digital , dial test indicator with bracket , growler for armature testing , vehicle starter motor input voltage 12v 1.4kw , model of evaporative condenser model , hydraulic jack 3 ton,trolly type , carburator solex mikuni , cut section of harmatically sealed compressor , hporlp cutout of hermaticaaly sealed compressor in cut section , cut section model of automatic expansion valve 1 33 total quantity : 53...

Due Date : September 30, 2023

Tender Value : ₹ 20 Lakhs

33

Kalyan Dombivli Municipal Corporation - Maharashtra

39531361 tender for direction valve major kit new supply adaptor 8 nos new supply fitting pressure relief valve set new supply direction valve servicing hydrolic jack major seal kit hydrolic jack hub hydrolic jack sleeve hydrolic jack boring hydrolic jack pin bush hydrolic jack pin bush welding fitting turner charge hydrolic jack removing refitting hydrolic jack shaft polishing hydrolic jack seal fitting hub bearing big...

Due Date : September 12, 2023

Tender Value : ₹ Ref. Documents

34

Kalyan Dombivli Municipal Corporation - Maharashtra

39531141 tender for providing rate sheet for following goods hydrolic pump kidney plate. hydrolic pump bearing hydrolic pump thrust plate hydrolic pump rear body hydrolic pump major kit adaptor pump drive shaft pump drive gear. pump drive flange hydrolic pump overhaul hydrolic jack major seal kit hydrolic jack hub hydrolic jack sleeve hydrolic jack boring hydrolic jack pin bush hydrolic jack pin bush welding fitting turner charge hydrolic jack removing refitting hydrolic jack shaft polishing...

Due Date : September 12, 2023

Tender Value : ₹ Ref. Documents

35

Ministry Of Petroleum And Natural Gas - Maharashtra

39522755 bids are invited for sply of flowering plants at hpmdi 1 50 salvia , torinia , marigold , zenia , petunia , dianthus , geranium , balsum , balsam all season , bigonia , red crinum lily , duranta purple , areca palm tree 4 to 5 ft , crotan petra , areliya , drecina mahatma , song of india , miniature ixora , cana variegated red leaf , singoniam , hibiscus not hybrid , musanda red or pink or white , plumbago , tagar mini , tecoma gaudichaudi , tecoma capensis , wedelia trilobata yellow , abelia variegated purple , zebrina purple , murraya exotica or paniculata , stachyterphata all colours , jatropha , hemelia patens , hydrengeas 2 colours , pampas grass red and green , poinsettia , gerbera potted , red crinum lily large , diffenbachia , diffenbachia verigated , aglaonema , jade , bamboo golden , senseveria , alocasia , monstera , zamia , heiconia , heiconia psittacorum , heiconia rostrata , russelia , acalypha hispidia foxtail plant , alstonia scholaris devil tree 4 to 5 ft , tabebuaia rosea pink trumpet tree 4 to 5 ft , jacaranda mimosifolia neel mohar tree 4 to 5 ft , cassia fistula bahava , lawn grass taiwan , lawn grass american lawn , lawn grass selection , mango tree 4 to 5 ft , jack fruit tree 4 to 5 ft , guava tree 4 to 5 ft , pomegranate tree 4 to 5 ft , custard apple tree 4 to 5 ft , banana tree 4 to 5 ft , papayatree 4 to 5 ft , pineapple plant , amla tree , anjir tree , dap , thimet , urea , stermil , folidust powder , organic manure , npk 19 19 19 , roger , roundup , fertile soil total quantity : 36375...

Due Date : September 23, 2023

Tender Value : ₹ Ref. Documents

36

Western Railway - Maharashtra

39519662 supply of hydraulic jack 30 ton with hand pump manual operated type with screwed ram and safety lock nut as per annexure i with spare repair kits and oem?s standard warranty. make: m / s premier control systems , m / s vankos and company, m / s enerpac india private limited, m / s vandec industrial hydraulics limted only. [ warranty period: 30 months after the date of delivery ] ...

Due Date : September 16, 2023

Tender Value : ₹ Ref. Documents

37

Kalyan Dombivli Municipal Corporation - Maharashtra

39509428 tender for assembly, brke pipe line new supply rear wheel packet 2 nos new supply brake pedal major kit new supply brake overhouling clutch cover assembly clutch pedal pin assembly release bearing fly wheel face plate fly wheel ring gear foundation clutch overhauling turner charge bell housing threding pedal pin bhushing fly wheel cutting fly wheel ring fitting clutch air booster assembly clutch sensor cylinder assembly hydrolic jack major seal kit hydrolic jack hub hydrolic jack sleeve hydrolic jack boring hydrolic jack pin bush hydrolic jack pin bush welding fitting turner charge hydrolic jack removing refitting hydrolic jack shaft polishing...

Due Date : September 12, 2023

Tender Value : ₹ Ref. Documents

38

Kalyan Dombivli Municipal Corporation - Maharashtra

39509391 tender for supply of items clutch cover assembly clutch pedal pin assembly release bearing fly wheel face plate fly wheel ring gear foundation clutch overholing turner charge bell housing threding pedal pin bhushing fly wheel cutting fly wheel ring fitting clutch air booster assembly clutch sensor cylinder assembly hydrolic jack major seal kit hydrolic jack hub hydrolic jack sleeve hydrolic jack boring etc.,...

Due Date : September 12, 2023

Tender Value : ₹ Ref. Documents

39

Kalyan Dombivli Municipal Corporation - Maharashtra

39509366 tender for providing rate contract direction valve major kit new supply adaptor 8 nos new supply fitting pressure relief valve set new supply direction valve servicing hydrolic jack major seal kit hydrolic jack hub hydrolic jack sleeve hydrolic jack boring hydrolic jack pin bush hydrolic jack pin bush welding fitting turner charge hydrolic jack removing refitting hydrolic jack shaft polishing hydrolic jack seal fitting hydrolic pump p.t.o driver gear, idler wheel, main shaft, bearing and seal set new supply and fitting...

Due Date : September 12, 2023

Tender Value : ₹ Ref. Documents

40

Kalyan Dombivli Municipal Corporation - Maharashtra

39509290 tender for providing rate sheet for following goods hydrolic jack seal major kit inos 2 hydrolic jack plunger inos 3 hydrolic jack seleeve 2nos hydrolic jack seat inos adaptor jack pin and bush shaft and block boring and polishing jack pin and braket new fabricating jack seal removing refitting...

Due Date : September 12, 2023

Tender Value : ₹ Ref. Documents

41

Kalyan Dombivli Municipal Corporation - Maharashtra

39509162 tender for providing rate sheet for following goods hydrolic jack seal major kit hydrolic jack plunger hydrolic jack seleeve hydrolic jack seat adaptor jack pin and bush shaft and block boring and polishing jack pin and braket new fabricating jack seal removing refitting disel filter water fitler stainer cam shaft assembly rocker shaft valve rocker valve and valve guide valve seal valve oil seal head gasket timming belt tensioner bearing water pump...

Due Date : September 12, 2023

Tender Value : ₹ Ref. Documents

42

Indian Army - Maharashtra

39498257 bids are invited for proc of ord stores 1 25 lv7 stln x 7474500 fuel injection pump vp 37 ve distribut , lv7 stln b 3209301 road spring rear assy , lv7 stln a1581100 assy gear box , lv7 stln 2540 72 0475416 towing hitch swivel assy , lv7 stln 2990 72 0484279 ecu assy , lv7 stln vf x 7453500 fuel inj pump nominal rated ve pump , lv7 stln vf 2520 72 0466596 transmission mechanical vehicular , lv7 stln vf 2520 72 0000500 propeller shaft , lv7 stln vf b 8719301 s a of fly wheel , 43 i 43 akl b6518538 suction hose 75mm 8m long , 43 i 43 akl b6518536 hose del dia 38mm 30m long , 43 i 43 akl b6518090 del hose 63mm 30m long , lv7 itr beml 2510 000651 guide roller stand assy , lv7 itr beml 651 21 2 alt 6 front suspension beam rh , lv7 itr beml 50 6 top seal for spring front suspension , lv7 itr beml 50 611 steering lock pin and chain assy lot 2 3 4 , lv7 itr beml 5330 003675 seal plain b 115 x 150 x 12 , lv7 itr beml 50 319 16 hose assy brk intervehicular 1800 , lv7 itr beml 5310 004992 wheel nut rh nut cone seal hexagon rh , lv7 itr beml 5310 004991 wheel nut lh nut cone s eal hexagaon lh , lv7 itr beml 2510 000652 centre pivot bottom , lv7 itr beml 50 66 51 pin lot 1 2 , lv7 itr beml 4720 000415 hose assy rubber 900 long lot 2 to 4 , lv7 itr beml 5340 012171 support block for jack , lv7 itr beml 3110 003549 coller brg od 105 id 66 x thk 8 , lv7 itr beml 50 223 1 cable 15 mtr 15 0 3 1 5mm 12 core , lv7 t 815 442 987 420 224 coating lh total quantity : 29675...

Due Date : September 20, 2023

Tender Value : ₹ Ref. Documents

43

Inter-University Centre For Astronomy And Astrophysics - Maharashtra

39497467 supply and installation of apple macbook air , apple macbook aiir as per given specifications : display: (13.6 inch) liquid retina display, led backlit display with ips technology, 2880x1864 native resolution at 224 px per inch with 1 billion colours; 500 nits; wide colour (p3); true tone technology processor: apple m2 chip 8 core cpu with 4 performance cores and 4 efficiency cores, 10 core gpu & 16 core neural engine, 100gb/s memory bandwidth storage: 1tb ssd memory: 16gb unified memory keyboard & trackpad: backlit magic keyboard with touch id & ambient light sensor. force touch trackpad with force clicks, pressure sensitive drawing & multi touch gestures. wireless: 802.11ax wi fi 6 (802.11ax) wireless networking + 5.3 bluetooth camera and audio: 1080p facetime hd camera with six speaker sound with force cancelling woofers & three mic array with directional. charging & expansion ports: magsafe 3 charging port, 3.5 mm headphone jack, two thunderbolt with support for: displayport, thunderbolt 3 ports (up to 40 gbps) battery and power: 66.5 wh lithium polymer battery, 70w usb c power adapter with fast charger with usb c to magsafe 3 cable warranty: 3 years (one year + additional 2 year apple care+) on site warranty color: midnight => limited...

Due Date : September 21, 2023

Tender Value : ₹ Ref. Documents

44

Department of Defence Production - Maharashtra

39490825 bids are invited for semfg339 washer , spacer , taper bolt , tube turn buckle , stud , guide pin , terminal block stud 2 , locking pin , fork end fwd lh , fork end , box retainer spring jack , spring top retainer spring jack , cap , roller , pivot bolt , end nut , axle nut , lock screw , orifice nut , handle , filler rod , fork kn6e , fork kn6e lh , extended fork kn6e lh , fork adjust kn6e , fork adjust kn6e lh , fork fixed kn6e , fork kn6e , fork kn8e lh , extended fork kn8e lh , fork kn8e , fork fixed , fork adjust , fork adjust lh , fork adjust rh , special elbow , special adapter , washer frf , castle nut rrf , washer rrf , washer frf aft , washer aft rrf , control tube centre , nipple , fitting prv , elbow fitting vrv , flexible fitting 20 dia , fitting 10d , fitting 4d , fitting 8d job work for manufacturing of aero component total quantity : 12460....

Due Date : September 15, 2023

Tender Value : ₹ Ref. Documents

45

Indian Air Force - Maharashtra

39473240 expression of interest ( eoi ) for indigenous development of eleven lines of ground equipment for a fighter aircraft; ( a ) 9404adm1 adapter, ground handling equipment ( missile trolley ) 01 11 ( b ) 9409adb missile dolly 01 05 ( c ) d23783000 adapter, aircraft jacking point ( main wheel jack adaptor ) 02 04 ( d ) d23799000 adapter, aircraft jacking point ( nose wheel jack adaptor ) 01 05 ( e ) 216a13w2008 tyre pressure adjusting trolley 01 05 ( f ) 591303 oil / hydraulic top up trolley ( engine oil top up trolley ) 01 05 ( g ) 6501cch1 filler, bleeder, hydraulic system power ( hydraulic oil top up trolley ) 01 05 ( h ) 6501ddc filler, bleeder, hydraulic system power ( coolant dispenser ) 01 01 ( j ) dh5362 electrical coolanol unit 01 01 ( k ) p5321b jack, aircraft landing gear ( bottle jack ) 01 05 ( l ) p5318a jack, hydraulic, tripod ( tripod jack ) 03 03...

Due Date : September 26, 2023

Tender Value : ₹ Ref. Documents

46

Private Company - Maharashtra

39443856 auction sale of rope suspended platform, table shifting equipment, tele lighting mast with dg set, ambulance, afd car (petrol), strand jack system, high press jet cleaning system, space clima etc. (location panvel. maharashtra...

Due Date : September 05, 2023

Tender Value : ₹ Ref. Documents

47

Central Railway - Maharashtra

39434308 supply of adapter, 9v, 2a adapter , 2 pin output with centre pin positive & outer one negative, having 2.1mm & 2.5mm jack for tv set top box , data equipments ?adsl router, switches etc , 5v, 2a adapter , 2 pin output with centre pin positive & outer one negative, having 2.1mm & 2.5mm jack for tv set top box , data equipment ?adsl router, switches etc...

Due Date : September 13, 2023

Tender Value : ₹ Ref. Documents

48

Zilla Parishad - Maharashtra

39427096 bids are invited for four wheel electric for garbage collection , stepany , hydraulic jack , battary , spanner set total quantity : 5...

Due Date : October 09, 2023

Tender Value : ₹ Ref. Documents

49

Sant Gadge Baba Amravati University - Maharashtra

39423415 supply of equipments for home supply of equipments for home science dept (rusa grant) , camcorder (camrea) : key features uvc support lcd /evf enhancedvisibility usb type c usb power supply (pd –e1 ) osd recording function600xdigital zoom dual pixel cmos af 5 axis optical image stabilisation sensor size : 2.54cm (1in ) cmos zoom ratio focal length : 15(25.5mm 382.5mm ) (35mm equi ) ( f2.8 f4.5 ) nd filter:turret switchable ( 1/4,1/16,1/64) autofocus system :dual pixel cmosaf best recording quality(reso,fps, color space ) : 4kuhd (3840x2160 )25pycc420 fullhd recording quality : full hd (1920x1080) 50 pycc420 recording file formatsbit depth :xf avc (8bit ) mp4 (8bit ) media type, recording time (highest quality, 32gb card ) : sd card x 2 ( 25 minutes ) packaged battery type ( continuous record time ) optional battery type (continuous record time ) :bp 820 & bp 828 screen size (inch ) evf specification :8.9cm (3.5in ) lcd capacitivetouch screen0.91cm (0.36in ) oled tilting evf dimensions (mm) weight ( kg ) ( with battery ) : dimensions141x216x265 weight 1.46 kg highest quality sdi output, 5oi sdi output format :n.a network capability :nil infrared :yes , similar specification:make : sony(leaflet be submitted in hard copy ) , similar specification:make: cannon(leaflet be submitted in hard copy ) , similar specification: make : panasonic(leaflet be submitted in hard copy ) , similar specification:make: nikon(leaflet be submitted in hard copy ) , porta light with 1000 watt tube : suitable for event photography, recording studio, standard mount type, compactable with camera, led light – 1, upto 3600k color temp., yellow & white light color, upto 1000 lx illumination, ac adopter, upto 1000w power consumption, 240v power required, w 15cm, h 10cm, d 5cm & heavy duty metal rod with fixing stand & lights , tripod : heavy duty tripod heavy duty tripod height: 5.5”, suitable for teleprompter/cameramounting , croma background stand :croma stand height: 6 ft. length: 6 ft. suitable for background , external hard disk :portable external hard drive 2tb , seagate , hp , toshiba , sound mixer :6 channel 24 bit efx microphone mixer, 6 mic/line + 2 stereo, 3 band eq per channel, mic / line selectivity switch on each mono channel with 20 db pad for mic input, mix, group & pfl routing per channel, l/r pan control & signal led per channel, 2 aux sends – aux + efx (when internal fx is not used), built in 24 bit multi fx processor with tap tempo , ahuja , globus , jbl , wireless microphone system :4 channel uhf wireless microphone system, frequency response: 50hz – 16khz, polar pattern (lapel mic): cardioid, output: individual channel: xlr mix out: ¼ jack, power req. (lapel mic): 2×1.5v aa , ahuja , jbl , sontronics , wired microphone: super cardioid pa wired microphone, transducer type: dynamic, sensitivity (at 1khz): 52db ±3db, nominal impedance: 600 o, connector: 3 pin xlr male , ahuja , jbl , sontronics , trolley speaker : receiver : bta 880 speaker : 1x12’’speaker, 1 x hf driver poweroutput(bi amp):50wmax.( lf+hf ) lf: 35w max hf: 15w max input channels : 2x mic 3mv/4.7k o, 1xaux 100mv/47 k omusic 100mv/47k o ,2xwireless mic frequency response : 55 18,000hz± 3db (bi amp ) s/n ratio : 60db tone controls : bass± 5db at 100hz, treble± 5db at 10khz digital player : mp3 player with usb, sd ,mmc card reader, rcording function and bluetooth preamp output : 200mv/600 o protections: acfuse : 1amp. 250v ( t1al) power supply : ac: 220v 240v 50/60hz dc: 12v car battery ( external ) ,12v7ah rechargeable battery ( built –in ) ac power consumption : 60va dimensions : w405xh610xd350mm weight : 18.80kg approx. microphones : wireless microphone : 2xhand held frequency stability : ±0.005% max. modulation : 45db rf output: 10mw frequency response : 50 15,000hz battery : 3v(2x1.5vaa pencil cells) current consumption : <200ma dimensions : t 52xl 242mm weight(w / o battery ) : 140 g approx.. , make: ahuja (leaflet be submitted in hard copy) , make: jbl(leaflet be submitted in hard copy) , make: sony(leaflet be submitted in hard copy) , make: croma(leaflet be submitted in hard copy) , monitor speaker:studio active monitor speakers, woofer: 120 mm, 4o, tweeter: 65 mm, 8o, output power: 2 x 20 w, frequency response: 50 hz to 25 khz, sample rate < 192 khz, dimensions: (h x w x d) 279 x 173 x 245 mm, weight 8.0 kg (17.6 lbs), audio connecting cables for active studio monitor , make: ahuja (leaflet be submitted in hard copy) , make: jbl(leaflet be submitted in hard copy) , make: sony(leaflet be submitted in hard copy) , make: croma(leaflet be submitted in hard copy) , player/recorder: usb digital player/recorder , make: ahuja (leaflet be submitted in hard copy) , make: jbl(leaflet be submitted in hard copy) , make: sony(leaflet be submitted in hard copy) , make: croma(leaflet be submitted in hard copy) , image camera:af mode: one shot af,ai ,focus af (stills ) ,servo af/movie servo af af point selection : spot af,1 point af,,expand af area ( above / below/ left /right or around ),flexible zone af1/2/3,whole area af afsystem points: maximum 1053 af frame zones ( stills / movies ) built – in flash closestfocusing distance( cm ) : 30( f= 24mm )35 (f=50mm ) continuousshootingspeed (shots/s) (upto ) : electronic 1st curtain: 6 electronic shutter : 40 digital zoom : digitaltele –converter x2.0 & x4.0 dimensions ( excl. protrusions ) : 132.5x86.1x128.0 drive system : leadscrew type stm efective iso : stills :100 102,400 (l:50/h :204,800 ) movie :100 25,600 ( h:102,400 ) canon log movies : iso800 25,600 (l:100 640,h:32,000 102,400) hdr pq movies :iso100 25,600* *hdr mode ( moving sub )requires min speed of iso800 efective pixels ( megapixels ):24.2 exposure compensation : + 3 stops in 1/3 –stop or ½ stopincrementsaeb :+ 3 stops in 1/3 –stop or ½ stopincrements eye detection af :auto /left eye /right eye ( auto, people and animal af model ) flash modes : focallength ( 35mm equivalant ) : 24 50mm guide number iso 100m : image resolution : 6000x4000 (jpegl/raw/c raw/heif ) 3984x2656 ( heif ,jpegm ) 2976x1984 ( heif ,jpegs1 ) 2400x1600 ( heif ,jpegs2 ) image stabilizer:still:in lens ( optical image stabilizer ) movie: in body 5 axis electronic image stabilization ( digital movie is) co ordinated control is ( optical is + movie digital is ) lcd monitor (size ): 7.62 (3.0 in ) lcd monitor resolutions :1.62 million manuals focus :yes memory card type : single card slots ( sd,sdhc*,sdxc* ) *uhs ii cards supported metering mode:stills :evaluative,parcial,spot,ceter weighted average movie : evaluative (when faces are detected, ) center weighted average ( when no faces are detected /when set to canon log 3 ) movie format : mp4 optical zoom ;2.0x optionalpower:acpower(acaadapterac e6n and dc coupler dr e18) usb power ( pd e1 ) peripheral connections : usb type c ( super speed plus usb ( usb3.2 gen2 )equivalent ) external microphone in headphone terminal hdmi micro ( type d) remote control terminal (e3 ) multi function shoe processor type : digicx sensor size : full frame cmos shooting modes : stills: a+ /hybrid auto / special scene mode /creative filters /fv/p/tv/av/m/b/c1/c2 movies: a+ /special scene mode ( hdr movie )/ creative filers /p/tv/av/m/c1/c2 shutter speed range (s) : stills electronic 1st curtain : 30 1/4000,electronic shutter:30 1/16000,30 1/8000 (high speed continuousshooting + ) movie recording : auto exposure: 1/25* 1/8000,shutter priority/manual exposure : 1/8* 1/8000 *varies by shooting mode and frame rate silent shutter : yes standard power supply: lp e17 still image format : jpeg,heif,raw, c raw viewfinder coverage : 100% viewfinder type : 0.99cm (0.39in ) oled, approx.. 2.36 million dots 59.94/119.88 frames per second refresh rate weight (including the battery : 671g and memory card ) ( approx.) *for camera kits, weight includes kit lens (es ). white balance : auto ( ambience priority /white priority ) ,daylight, shade, cloudy ( effective in twilight and sunset,) tungsten light, white fluorescent light,flash*, custom,color termperature setting (approx.. 2500 10000k ) shoot to set white balance (live view), white balance shift and white balance bracketing features available *flash color temperature information transmission possible (ex/elseries speedlite ) x sync:electric 1st curtain: 1/200s , nikon(leaflet be submitted in hard copy) , sony (leaflet be submitted in hard copy) , cannon(leaflet be submitted in hard copy) , panasonic(leaflet be submitted in hard copy) , treadmill :.dimensio:78”(l)x33”(w)x57”(h). motor :ac motor, 3.0 hp continuous duty,5.0 hp peak duty, speed : 1.0 to 20 kmph . elevation : 0% to 15% running surface: 64” (l) x 23” (w). programs : 13 programmes, 12 presets, 1 body fat and 1 manual display :lcd with single window display system power requirements : 220v ac.. max user weight:150 kgs. , make : cosco (leaflet be submitted in hard copy ) , make : aerofit (leaflet be submitted in hard copy ) , make : proline (leaflet be submitted in hard copy )...

Due Date : September 07, 2023

Tender Value : ₹ Ref. Documents

50

Rural Development Department - Maharashtra

39373254 installation cctv camera and provide materail , devices , network video recorder (nvr) up to 8 megapixels resolution recording 2 sata hdds , up to 10tb for each hdd (16 channel) , entry level 4 mp (4mm lense) ultra fixed bullet network camera smart ir up to 30 mtr. (98ft) irdistance support 128micro sd card high quality imae with 4 mp 1/3 cmos sensor , 2 mp (2.8mm lense) fixed dome network camera smart ir up to 30m ir distance high qualtiy image with 2 mp 1/2.8 cmos sensor. , 4tb surveillance hard drive sata 6gb/s 256 mb catch for dvr/nvr , switch , power ethernet switch 8 channel , power ethernet switch 4 channel , cables , network , lan , ethernet data cable (cat 6) per mtr. (outdoor) , connectors and other equipment , reistered jack 45 ( rj 45) connector , installation , installation testing and commissioning of 4 x 4 sq. mm. box per box , one time installation testing and commissioning per nvr , one time installation testing and commissioning camera ip per camera , 4u rack , pdu and accessories and installation per rack , 2u rack , pdu and accessories and installation...

Due Date : September 04, 2023

Tender Value : ₹ Ref. Documents

1
2
3
4
5
6
7
8
9
10