36960237 supply of portable rail cutting machine ( saw type ) complete fited with petrol and kerocine run engine of 2 by 3 isi make with mono rail wheel arrangement . the machine shall supply with complete kit of tools and operating manual guide line. [ warranty period: 12 months after the date of delivery ] ...
36350872 auction sale of material available under the custody of cdms / ned, maharashtra state.lot no. 34115 / 23 / 02 / 74 / ned / ned / tmcscrap unserviceable and condemned rail cutting machines ( 9 numbers ) , abrasive rail cutter ( 6 numbers ) , rail drilling machine ( 6 numbers ) of sse / p.way / pau, abrasive cutting machine ( 1 number ) , rail profile girder ( 1 number ) , grinding machine ( 1 number ) , rail cutting machine ( 2 number ) , drill machine ( 1 number ) of sse / p.way / whm, rail cutting machine ( 5 numbers ) , abrasives rail cuttingmachine ( 1 number ) , pressure tank for welding ( 6 numbers ) of sse / p.way / mue. machines available in broken and dismantled condition. approximate total weight 1509.3 kgs ( approx. iron weight 1464 kgs, approx. copper weight 7.8 kgs, approx. aluminum weight 24.5 kgs, approx. ci weight 13 kgs ) total stacks. 01hsn code: 72042910, pl no: 98050011.location: inside uniform cell, at pf 4 side, nanded railway station.ds 8 no: 34115001 dt. 03.05.2019, 34115003 dt. 04.05.2019, 345400003 dt. 29.01.2019, 00000003 to00000005 dt. 28.04.2018.delivery by actual weighment basis only.special notes: 1 ) delivery by actual weighment basis only.2 ) the above non ferrous quantities mentioned are approximate only bidders / purchasers should inspect / visit the location to ensure approach road, material in lot before participating in auction. after auction no representation shall be entertained....
36268854 auction sale of scrap condemned / defective small track machines beyond repairable various types and sizes consisting of abrasive rail cutter 23 nos., rail cutting machine ( saw type ) 22 nos., rail drill machine 40 nos., rail profile weld grinder 10 nos., portable dc generator up to 2.5 kw 6 nos., portable dc generator up to 3.5 kw 6 nos., portable dc generator up to 6.5 kw 3 nos., double action weld trimmer 13 nos., mechanical track ( 8 ton ) 17 nos., mechanical track ( 15 ton ) 5 nos., hydraulic track ( 15 ton ) 3 nos., 250 amp welding machine compressor 1 nos., air blower machine 1 nos., battery charger hooter 1 nos., battery operated bolt tightening machine 1 nos., boulder cutter machine 1 nos., continuous rail thermometer 1 nos., continuous traumatic welding machine 1 nos., mechanical toe load measuring device 5 nos., electrical toe load measuring device 2 nos., hydraulic rail tensor 5 nos., off track tamper 7 nos., power rail lifting machine 2 nos., power supply ( 12 watt ) 1 nos., table grinder 1 nos., hammer drill machine 1 nos., hand operated rail cutting machine 2 nos. with ferrous and non ferrous attachment and make for rail cutting, drilling machines partial dismantled and loose / released spare parts of stm. remarks pakka approach road is available near the lot. delivery on ?as is were basis? by lot. the machines have been marked sr. no. 1 to 181. only materials mentioned in d. o. should be delivered. stock holder is responsible for any addition, deletion and variation if any in the lot after joint inspection. no cutting of machines is allowed in the premises. purchaser has to personally visit the site and to see the lot before bidding. purchaser has to arrange his own hydra / labour for loading of machines. since it is a depot new materials / scrap materials of p.way are lying in and around lot. care should be taken by witnessing official delivery that the same should not be delivered. location senior section engineer ( p.way ) ( store ) bhandup depot. qty 01 by lot. stock holder sse ( p.way ) ( store ) bhandup....
35611652 supply of honda engine gx 200d sd model or similar [honda engine gx 200d sd model or similar for abrasive rail cutting machine as per the specification (make: honda gx 200d sd model)]honda engine gx 200d sd model or similar [honda engine gx 200d sd model or similar for abrasive rail cutting machine as per the specification (make: honda gx 200d sd model)],honda engine gx 200d sd model or similar for abrasive rail cutting machine as per the specification (make: honda gx 200d sd model) [ warranty period: 30 months after the date of delivery]...
32428830 supply of abrasive rail cutting machineabrasive rail cutting machine,honda engine gx 200d sd model or similar for abrasive rail cutting machine as per the specification....
32148200 auction sale of scrap and unserviceable condemned various types of machinery and plants items such as ( 1 ) various types of portable / hand / pneumatic drilling machine ( 2 ) jib crane 2t, 1t plant no.1998, 1960, 1961 ( 3 ) hydrolic rail tenser ( 4 ) weld trimer ( 5 ) grinder machine ( 5 ) weld grinder ( 6 ) cutting machines ( 7 ) concreate sleeper drilling machine ( 7 ) 31mm heavy duty drilling machine ( 8 ) abrasive rail cutting machine ( 9 ) electric hoist plant no.1825 ( 10 ) m.s. bench vice ( 11 ) press for leather bucket plant no.476 ( 12 ) automatic coil winding machine m&p no.106 ( 13 ) circular saw tilting arbor machine plant no.cf4 / rw / ds / p2 / mc 2 with 1 motor ( 14 ) pedestal grinding machine plant no.cf4 / ds / p8 / m 13 ( 15 ) drilling machine radial & pillar type plant no. cf4 / rw / ds / p3 / mc 3, in dismenteled and broken condition , with and without motor and n.f. attachment. ( qty approx ) ...
31522532 auction sale of scrap and unserviceable condemned various types of machinery and plants items such as ( 1 ) various types of portable / hand / pneumatic drilling machine ( 2 ) jib crane 2t, 1t plant no.1998, 1960, 1961 ( 3 ) hydrolic rail tenser ( 4 ) weld trimer ( 5 ) grinder machine ( 5 ) weld grinder ( 6 ) cutting machines ( 7 ) concreate sleeper drilling machine ( 7 ) 31mm heavy duty drilling machine ( 8 ) abrasive rail cutting machine ( 9 ) electric hoist plant no.1825 ( 10 ) m.s. bench vice ( 11 ) press for leather bucket plant no.476 ( 12 ) automatic coil winding machine m&p no.106 ( 13 ) circular saw tilting arbor machine plant no.cf4 / rw / ds / p2 / mc 2 with 1 motor ( 14 ) pedestal grinding machine plant no.cf4 / ds / p8 / m 13 ( 15 ) drilling machine radial & pillar type plant no. cf4 / rw / ds / p3 / mc 3, in dismenteled and broken condition , with and without motor and n.f. attachment. ( qty approx ) ...
30840243 auction sale of scrap and unserviceable condemned verious types of machinery and plants items such as ( 1 ) various types of portablr / hand drilling machine ( 2 ) jib crane 2t, 1t plant no.1998, 1960, 1961 ( 3 ) hydrolic rail tenser ( 4 ) weld trimer ( 5 ) grinder machine ( 5 ) weld grinder ( 6 ) cutting machines ( 7 ) concreate sleeper drilling machine ( 7 ) 31mm heavy duty drilling machine ( 8 ) abrasive rail cutting machine ( 9 ) electric hoist plant no.1825 ( 10 ) m.s. bench vice in dismenteled and broken condition with and without n.f. attachment. ( qty approx ) ...
28073411 repair and maintenance contract for abrasive rail cutting machines ( honda make ) under sr ren / ratnagiri section.repair and maintenance contract for abrasive rail cutting machines ( honda make ) under sr ren / ratnagiri section., ...
27712752 supply of abrasive rail cutting machineabrasive rail cutting machine,abrasive rail cutting machine as per rdso specification no. tmsm/1 rev. 01 of2012....
22601598 tender for tender for gpr miraj tbr 28.26 km. miraj kop tbr 14.681 kms. total tbr 42.941 kms. carriage of all types of p.way materials using railways dip lorry to any haul upto 1 km. in yards, sidings, loop lines, lines under construction, non running lines where blocking the section for through traffic is not required. , cutting / cropping of rails 52kg. 90 uts rails perfectly vertical with contractors hacksaw blade and tools. ( a ) on cess , cutting / cropping of rails 52kg. 90 uts rails perfectly vertical with contractors hacksaw blade and tools. ( b ) in situ , cutting / cropping of 52kg. / 60kg. rails perfectly verticle with contractors abrasive ( disk ) rail cutting machine in situ or on cess , drilling of holes in rails of all section either manually or by drilling machine to correct spacing specified by engineer. ( a ) 32mm dia holes , drilling of holes in rails of all section either manually or by drilling machine to correct spacing specified by engineer. ( a ) 32mm dia holes , drilling of holes in rails of all section either manually or by drilling machine to correct spacing specified by engineer. ( b ) all other diameter for works like gapless joints, ohe bond holes, etc , champhering of holes with contractors tools, plants and champhering kit. , removing fastenings, lifting rail on rollers, beating the rail with mallet and re fixing fastenings including replacement of missing / worn out fastenings within block period in connection with distressing of lwrs / cwrs as prescribed in lwr manual. ( after fixing fastenings specified gauge should be ensured ) . etc...
22601572 tender for pune miraj section trr ( p ) 19.888 kms. unloading three rail panels / five rail panels from railway bfr / brh wagons in block sections , cutting / cropping of rails 60kg. perfectly vertical with contractors hacksaw blade & tools. ( a ) on cess , cutting / cropping of rails 60kg. perfectly vertical with contractors hacksaw blade & tools. ( b ) in situ , cutting / cropping of 52kg. / 60kg. rails perfectly verticle with contractors abrasive ( disk ) rail cutting machine in situ or on cess , removing fastenings, lifting rail on rollers, beating the rail with mallet and re fixing fastenings including replacement of missing / worn out fastenings within block period in connection with distressing of lwrs / cwrs as prescribed in lwr manual. ( after fixing fastenings specified gauge should be ensured ) . , champhering of holes with contractors tools, plants and champhering kit. , drilling of holes in rails of all section either manually or by drilling machine to correct spacing specified by engineer. ( b ) all other diameter for works like gapless joints, ohe bond holes, etc , removing fastenings, applying necessary tension in the rails and refixing the fastenings including replacement of missing / worn out fastenings to specified gauge under block period for distressing operations by use of rail tensor ( hydraulically operated jacks and tensors would be supplied by railway and operations will be carried out strictly as per lwr manual ) . , removing of seized erc from mci inserts of existing track after heating the insert by oxyacetylene. due care shall be taken to ensure no damage to the sleeper. rate includes refixing of erc with greasing of insert eye and the erc ( grease to be supplied by railway ) . , drilling of 40mm dia holes in mbc sleepers with suitable rotary hammer drilling machine at indicated location for fixing of guard rails on bridges and approaches as per standard drawing no. rdso / t 4088, 4089 to 4097 and fixing railways dowels ( drg.no.t 3002 ) in the holes with contractors approved epoxy resins including all tools, labour, equipment, materials, etc. com , digging road surface of all types except pre cast concrete block surface, removing spoils upto bottom of sleepers and refilling soil to original level by proper ramming and consolidation in connection with overhauling of l.c. ( attention to track items like sleepers, fittings, rail replacement, painting & making pucca road surface shall be paid extra ) etc...
21906762 tender for repair and maintenance contract for abrasive rail cutting machines ( honda make ) under sr ren / ratnagiri section....
21668833 supply of rail cutting machine, rail cutting machine (saw type ) as per rdso specification no. tm/sm/4dated24/04/2019. or equivalent....
21406918 repair and maintenance contract for abrasive rail cutting machines ( honda make ) under sr ren / ratnagiri section....
19970643 supply of abrasive rail cutting machine => limited tender...
19784434 tender for rail cutting machineitem list : (1) abrasive rail cutting disc 16 inch 400mm diameter for rail cutting machine and as per rdsospecification no. tm/sm/2 (rev. 01 of 2007)sr project manager karnataka 20.00 numbers...
17259803 tender for saw type rail cutting machine petrol start kerosene run engine ....
16976164 tender for rail cutting machine (saw type) (rdso specification no.tm/sm/4 dt.24.04.1991)...
16447179 manufacture and supply of : ( a ) rail cutting machine saw type complete fitted with petrol start and kerosene driven engine of 2 / 3 hp isi mark with mono rail wheel arrangement as per rdso specn. no. tm / sm / 4 dated 24.04.1991=06 nos. ( b ) rail drilling machine with petrol start and kerosene driven engine as per rdso specn. no. tm / sm / 3 dated 24 / 04 / 1991 =08 nos....
14046878 tender for i ) item no. ( a ) supply of rail cutting machine, saw type as per rdso specification no. tm / sm / 4 dtd.24.04.1991 quantity = 32 nos. i ) item no. ( b ) supply of rail drilling machine as per rdso specification no. tm / sm / 3 dtd.24.04.1991. quantity = 32 nos....
13748069 repair and maintenance contract for abrasive rail cutting machine ( honda make ) under sr ren / ratnagiri section....
13748066 repair and maintenance contract for abrasive rail cutting machine ( honda make ) under sr ren / ratnagiri section....
13708283 repair and maintenance contract for abrasive rail cutting machine ( honda make ) under sr ren / ratnagiri section....
13410989 supply of abrasive rail cutting disc 16 inch 400mm 400x4x22.23 for partner k 1200 rail cutting machine as per rdso specification no. tm/sm/2 rev.01 of 2007quantity: 2800.00...
13410988 supply of abrasive rail cutting disc 16 inch 400mm 400x4x22.23 for partner k 1200 rail cutting machine as per rdso specification no. tm/sm/2 rev.01 of 2007quantity: 1700.00...
13355286 repair and maintenance contract for abrasive rail cutting machine ( honda make ) under sr ren / ratnagiri section....
13317868 supply of abrasive rail cutting disc 16 inch 400mm 400x4x22.23 for partner k 1200 rail cutting machine as per rdso specification no. tm/sm/2 rev.01 of 2007quantity: 1700.00...
13317867 supply of abrasive rail cutting disc 16 inch 400mm 400x4x22.23 for partner k 1200 rail cutting machine as per rdso specification no. tm/sm/2 rev.01 of 2007quantity: 2800.00...
13086621 tender for through turnout renewal ( thick web switches = 153 sets ( excluding sleepers ) .removing from track consisting of any type of sleeper and sleeper density the existing 90r / 52kg. free rails / 3 rail panels / 5 rail panels by removing fishe plates fastening and fish bolts, keeping released rails safety on cess and other released materials as directed by engineer ( work to be done under block and railways supervision , drilling of 32mm dia holes in rails of all section either manually or by drilling machine to correct spacing specified by engineer , cutting of 52 / 60 kg 90 uts / hh rails by abrasive rail cutting machine such as partner make or similar perfectly vertical with contractors own tools and plants including machine , blades , fuel, labour , leads , lifts , crossings of tracks , taxes etc....
12511560 tender for ccg vr section : annual maintenance contract for abrasive rail cutting machines partner / similar make working under aden ( t / s ) pl section and aden ( t / n ) bvi section for the period of two years ccg vr section : annual maintenance contract for abrasive rail cutting machines partner / similar make working under aden ( t / s ) pl section and aden ( t / n ) bvi section for the period of two years etc....
11874871 ccg vr section : annual maintenance contract for abrasive rail cutting machines partner / similar make working under aden ( t / s ) pl section and aden ( t / n ) bvi section for the period of two years...
10152559 repairs and maintenance contract for abrasive rail cutting machine honda make under sr ren ratnagiri...
9916403 repairs and maintenance contract of abrasive rail cutting machines honda make under sr ren ratnagiri...
7144006 repairs and maintenance contract for partner abrasive rail cutting machines for 2 years under ren rn...
7144004 repairs contract for partner abrasive rail cutting machines honda make for 2 years under ren rn...
6836630 repairs and maintenance contract for partner abrasive rail cutting machines for two years under ren...
6836603 repairs and maintenance contract for abrasive rail cutting machine honda make for one year under ren...
6642897 repairs and maintenance contract for partner abrasive rail cutting machines for two years...
6642869 repairs and maintenance contract for abrasive rail cutting machines honda make for one year...
6471653 repairs and maintenance contract for abrasive rail cutting machines for 2 years under ren ratnagiri...
6049911 ccg vr section : annual maintenance contract for abrasive rail cutting machines partner / similar make working under aden (t/s) pl and aden (t/n) bvi section....
5734793 ccg vr section : annual maintenance contract for abrasive rail cutting machines partner / similar make working under aden (t/s) pl and aden (t/n) bvi section....
5264261 ccg vr section : annual maintenance contract for abrasive rail cutting machines partner / similar make working under aden (t/s) pl and aden (t/n) bvi section....
5053613 ccg vr section : annual maintenance contract for abrasive rail cutting machines partner / similar make working under aden (t/s) pl and aden (t/n) bvi section....
4816925 churchgate virar section : annual maintenance contract for partner abrasive rail cutting machines working under aden (t/s) pl and aden (t/n) bvi section....
4437284 annual maintenance contract for partner abrasive rail cutting machines. ...
4203828 annual maintenance contract for partner abrasive rail cutting machines work, providing fibre reinforced precast block, repairs to facia of cover platform shed , provision of machanised linen management system and development, fabrication, supply and fitment of modified filter assembly for traction motor ...
3511642 supply of petrol driven rail cutting machine for art. ...
3511639 supply of abrasive disc rail cutting machine for art. ...