Ministry Of Defence - Maharashtra

34001830 bids are invited for rotary evaporator with accessories as perspecification no. hemrl / srp hd / re / 2021 10 / 1 total quantity : 1...

Ministry Of Defence - Maharashtra

32301534 bids are invited for rotary evaporator with accessories as per specification no. hemrl/srp hd/re/2021 10/1 (q3) total quantity : 1...

Datta Meghe Institute Of Medical Sciences - Maharashtra

31852446 tender of dmims (du) for supply pharmacy equipment & instrument requirements for year 2022 23 for dmcp, sawangi(m), wardha 1 trinocular microscope with semi plan objectives 2 biopac data acquisition system 3 dynamic plantar von frey instrument. ugo basil 4 y maze apparatus for rats 5 vogel conflict test apparatus 6 tail flick analgesiometer 7 surgical set for lab animal instruments 8 co2 euthanasia chamber 9 mice cages 10 rat cages 11 autoclave for husk 12 probe sonicator 13 high pressure homogenizer 14 electrospinning machine 15 rotary evaporator 16 differential scanning colorimetry 17 hplc 18 all purpose main drive 19 double cone blender 20 v cone 1lit 21 cube mixer 22 ball mill 23 rapid mixer granulator r & d coater (including) compressor (20 lit) 24 coating pan 8 inc 25 film former 26 fluidized bed drier 27 extruder ...

Ministry Of Defence - Maharashtra

31099787 bids are invited for rotary evaporator with accessories as per specification no. hemrl/srp hd/re/2021 10/1 (q3) total quantity : 1...

Department Of Atomic Energy - Maharashtra

30294677 bids are invited for vacuum pump fitted rotary evaporator with dry ice condenser (q3) , receiving flask– 500 ml (q3) , foam brakewith piston clamp (q3) , vacuum seal (ptfe/fkm) (q3) total quantity : 4...

University Of Mumbai - Maharashtra

30161548 supply of rotary evaporator with vacuum pump supply of rotary evaporator with vacuum pump , item description , rotary evaporator , vacuum pump...

Department Of Ayush - Maharashtra

30083404 bids are invited for rotary evaporator specification 1 rotary evaporator• rotation speed up 20 280 rpm or better• rotary evaporator condenser 1 litre evaporating flask and 1 litre, receiving flask as standard along with instrument.• height adjustment provision 150 ~160 mm• evaporating flask anglecan be adjusted in between 20° to 80°• preferably detachable operating panel• universal heating bath temperature ambient to 200 deg c• heating bath with safety handles and drain spout should be available.• bath over temperature cut off automatically if temperature overshoots by 5°c or runs in dry condition.• bath temperature accuracy:±1• digital display of heating bath for actual and set temperature, • universal movable heating bath can accommodate –up to5 ltr flask• sample distillation capability up to 5 litre• secondary over temperature cut off at 250°c.• condensate surface: 1200cm² or better• paint formula provides much higher resistance against corrosion especially from condensed water.• all parts which are in contact with the media should be consist of graphite filled ptfe vacuum seal.• designed vapor tube with sleeve to added more strength and easily removes from the drive.• voltage frequency 220 240v / 50 hz• protection class – ip 20• certificates: instrument should have iso 9001 : 2008• ce certification• preferably local engineer should be available • warranty 3 years , rotary evaporator specification 2 rotary evaporator• rotation speed up 20 280 rpm or better• rotary evaporator condenser 1 litre evaporating flask and 1 litre, receiving flask as standard along with instrument.• height adjustment provision 150 ~160 mm• evaporating flask anglecan be adjusted in between 20° to 80°• preferably detachable operating panel• universal heating bath temperature ambient to 200 deg c• heating bath with safety handles and drain spout should be available.• bath over temperature cut off automatically if temperature overshoots by 5°c or runs in dry condition.• bath temperature accuracy:±1• digital display of heating bath for actual and set temperature, • universal movable heating bath can accommodate –up to5 ltr flask• sample distillation capability up to 5 litre• secondary over temperature cut off at 250°c.• condensate surface: 1200cm² or better• paint formula provides much higher resistance against corrosion especially from condensed water.• all parts which are in contact with the media should be consist of graphite filled ptfe vacuum seal.• designed vapor tube with sleeve to added more strength and easily removes from the drive.• voltage frequency 220 240v / 50 hz• protection class – ip 20• certificates: instrument should have iso 9001 : 2008• ce certification• preferably local engineer should be available • warranty 3 years , rotary evaporator specification 3 rotary evaporator• rotation speed up 20 280 rpm or better• rotary evaporator condenser 1 litre evaporating flask and 1 litre, receiving flask as standard along with instrument.• height adjustment provision 150 ~160 mm• evaporating flask anglecan be adjusted in between 20° to 80°• preferably detachable operating panel• universal heating bath temperature ambient to 200 deg c• heating bath with safety handles and drain spout should be available.• bath over temperature cut off automatically if temperature overshoots by 5°c or runs in dry condition.• bath temperature accuracy:±1• digital display of heating bath for actual and set temperature, • universal movable heating bath can accommodate –up to5 ltr flask• sample distillation capability up to 5 litre• secondary over temperature cut off at 250°c.• condensate surface: 1200cm² or better• paint formula provides much higher resistance against corrosion especially from condensed water.• all parts which are in contact with the media should be consist of graphite filled ptfe vacuum seal.• designed vapor tube with sleeve to added more strength and easily removes from the drive.• voltage frequency 220 240v / 50 hz• protection class – ip 20• certificates: instrument should have iso 9001 : 2008• ce certification• preferably local engineer should be available • warranty 3 years , rotary evaporator specification 4 rotary evaporator• rotation speed up 20 280 rpm or better• rotary evaporator condenser 1 litre evaporating flask and 1 litre, receiving flask as standard along with instrument.• height adjustment provision 150 ~160 mm• evaporating flask anglecan be adjusted in between 20° to 80°• preferably detachable operating panel• universal heating bath temperature ambient to 200 deg c• heating bath with safety handles and drain spout should be available.• bath over temperature cut off automatically if temperature overshoots by 5°c or runs in dry condition.• bath temperature accuracy:±1• digital display of heating bath for actual and set temperature, • universal movable heating bath can accommodate –up to5 ltr flask• sample distillation capability up to 5 litre• secondary over temperature cut off at 250°c.• condensate surface: 1200cm² or better• paint formula provides much higher resistance against corrosion especially from condensed water.• all parts which are in contact with the media should be consist of graphite filled ptfe vacuum seal.• designed vapor tube with sleeve to added more strength and easily removes from the drive.• voltage frequency 220 240v / 50 hz• protection class – ip 20• certificates: instrument should have iso 9001 : 2008• ce certification• preferably local engineer should be available • warranty 3 years , rotary evaporator specification 5 rotary evaporator• rotation speed up 20 280 rpm or better• rotary evaporator condenser 1 litre evaporating flask and 1 litre, receiving flask as standard along with instrument.• height adjustment provision 150 ~160 mm• evaporating flask anglecan be adjusted in between 20° to 80°• preferably detachable operating panel• universal heating bath temperature ambient to 200 deg c• heating bath with safety handles and drain spout should be available.• bath over temperature cut off automatically if temperature overshoots by 5°c or runs in dry condition.• bath temperature accuracy:±1• digital display of heating bath for actual and set temperature, • universal movable heating bath can accommodate –up to5 ltr flask• sample distillation capability up to 5 litre• secondary over temperature cut off at 250°c.• condensate surface: 1200cm² or better• paint formula provides much higher resistance against corrosion especially from condensed water.• all parts which are in contact with the media should be consist of graphite filled ptfe vacuum seal.• designed vapor tube with sleeve to added more strength and easily removes from the drive.• voltage frequency 220 240v / 50 hz• protection class – ip 20• certificates: instrument should have iso 9001 : 2008• ce certification• preferably local engineer should be available • warranty 3 years , rotary evaporator specification 6 rotary evaporator• rotation speed up 20 280 rpm or better• rotary evaporator condenser 1 litre evaporating flask and 1 litre, receiving flask as standard along with instrument.• height adjustment provision 150 ~160 mm• evaporating flask anglecan be adjusted in between 20° to 80°• preferably detachable operating panel• universal heating bath temperature ambient to 200 deg c• heating bath with safety handles and drain spout should be available.• bath over temperature cut off automatically if temperature overshoots by 5°c or runs in dry condition.• bath temperature accuracy:±1• digital display of heating bath for actual and set temperature, • universal movable heating bath can accommodate –up to5 ltr flask• sample distillation capability up to 5 litre• secondary over temperature cut off at 250°c.• condensate surface: 1200cm² or better• paint formula provides much higher resistance against corrosion especially from condensed water.• all parts which are in contact with the media should be consist of graphite filled ptfe vacuum seal.• designed vapor tube with sleeve to added more strength and easily removes from the drive.• voltage frequency 220 240v / 50 hz• protection class – ip 20• certificates: instrument should have iso 9001 : 2008• ce certification• preferably local engineer should be available • warranty 3 years , rotary evaporator specification 7 rotary evaporator• rotation speed up 20 280 rpm or better• rotary evaporator condenser 1 litre evaporating flask and 1 litre, receiving flask as standard along with instrument.• height adjustment provision 150 ~160 mm• evaporating flask anglecan be adjusted in between 20° to 80°• preferably detachable operating panel• universal heating bath temperature ambient to 200 deg c• heating bath with safety handles and drain spout should be available.• bath over temperature cut off automatically if temperature overshoots by 5°c or runs in dry condition.• bath temperature accuracy:±1• digital display of heating bath for actual and set temperature, • universal movable heating bath can accommodate –up to5 ltr flask• sample distillation capability up to 5 litre• secondary over temperature cut off at 250°c.• condensate surface: 1200cm² or better• paint formula provides much higher resistance against corrosion especially from condensed water.• all parts which are in contact with the media should be consist of graphite filled ptfe vacuum seal.• designed vapor tube with sleeve to added more strength and easily removes from the drive.• voltage frequency 220 240v / 50 hz• protection class – ip 20• certificates: instrument should have iso 9001 : 2008• ce certification• preferably local engineer should be available • warranty 3 years , rotary evaporator specification 8 rotary evaporator• rotation speed up 20 280 rpm or better• rotary evaporator condenser 1 litre evaporating flask and 1 litre, receiving flask as standard along with instrument.• height adjustment provision 150 ~160 mm• evaporating flask anglecan be adjusted in between 20° to 80°• preferably detachable operating panel• universal heating bath temperature ambient to 200 deg c• heating bath with safety handles and drain spout should be available.• bath over temperature cut off automatically if temperature overshoots by 5°c or runs in dry condition.• bath temperature accuracy:±1• digital display of heating bath for actual and set temperature, • universal movable heating bath can accommodate –up to5 ltr flask• sample distillation capability up to 5 litre• secondary over temperature cut off at 250°c.• condensate surface: 1200cm² or better• paint formula provides much higher resistance against corrosion especially from condensed water.• all parts which are in contact with the media should be consist of graphite filled ptfe vacuum seal.• designed vapor tube with sleeve to added more strength and easily removes from the drive.• voltage frequency 220 240v / 50 hz• protection class – ip 20• certificates: instrument should have iso 9001 : 2008• ce certification• preferably local engineer should be available • warranty 3 years , rotary evaporator specification 9 rotary evaporator• rotation speed up 20 280 rpm or better• rotary evaporator condenser 1 litre evaporating flask and 1 litre, receiving flask as standard along with instrument.• height adjustment provision 150 ~160 mm• evaporating flask anglecan be adjusted in between 20° to 80°• preferably detachable operating panel• universal heating bath temperature ambient to 200 deg c• heating bath with safety handles and drain spout should be available.• bath over temperature cut off automatically if temperature overshoots by 5°c or runs in dry condition.• bath temperature accuracy:±1• digital display of heating bath for actual and set temperature, • universal movable heating bath can accommodate –up to5 ltr flask• sample distillation capability up to 5 litre• secondary over temperature cut off at 250°c.• condensate surface: 1200cm² or better• paint formula provides much higher resistance against corrosion especially from condensed water.• all parts which are in contact with the media should be consist of graphite filled ptfe vacuum seal.• designed vapor tube with sleeve to added more strength and easily removes from the drive.• voltage frequency 220 240v / 50 hz• protection class – ip 20• certificates: instrument should have iso 9001 : 2008• ce certification• preferably local engineer should be available • warranty 3 years , rotary evaporator specification 10 rotary evaporator• rotation speed up 20 280 rpm or better• rotary evaporator condenser 1 litre evaporating flask and 1 litre, receiving flask as standard along with instrument.• height adjustment provision 150 ~160 mm• evaporating flask anglecan be adjusted in between 20° to 80°• preferably detachable operating panel• universal heating bath temperature ambient to 200 deg c• heating bath with safety handles and drain spout should be available.• bath over temperature cut off automatically if temperature overshoots by 5°c or runs in dry condition.• bath temperature accuracy:±1• digital display of heating bath for actual and set temperature, • universal movable heating bath can accommodate –up to5 ltr flask• sample distillation capability up to 5 litre• secondary over temperature cut off at 250°c.• condensate surface: 1200cm² or better• paint formula provides much higher resistance against corrosion especially from condensed water.• all parts which are in contact with the media should be consist of graphite filled ptfe vacuum seal.• designed vapor tube with sleeve to added more strength and easily removes from the drive.• voltage frequency 220 240v / 50 hz• protection class – ip 20• certificates: instrument should have iso 9001 : 2008• ce certification• preferably local engineer should be available • warranty 3 years , rotary evaporator specification 11 rotary evaporator• rotation speed up 20 280 rpm or better• rotary evaporator condenser 1 litre evaporating flask and 1 litre, receiving flask as standard along with instrument.• height adjustment provision 150 ~160 mm• evaporating flask anglecan be adjusted in between 20° to 80°• preferably detachable operating panel• universal heating bath temperature ambient to 200 deg c• heating bath with safety handles and drain spout should be available.• bath over temperature cut off automatically if temperature overshoots by 5°c or runs in dry condition.• bath temperature accuracy:±1• digital display of heating bath for actual and set temperature, • universal movable heating bath can accommodate –up to5 ltr flask• sample distillation capability up to 5 litre• secondary over temperature cut off at 250°c.• condensate surface: 1200cm² or better• paint formula provides much higher resistance against corrosion especially from condensed water.• all parts which are in contact with the media should be consist of graphite filled ptfe vacuum seal.• designed vapor tube with sleeve to added more strength and easily removes from the drive.• voltage frequency 220 240v / 50 hz• protection class – ip 20• certificates: instrument should have iso 9001 : 2008• ce certification• preferably local engineer should be available • warranty 3 years , rotary evaporator specification 12 rotary evaporator• rotation speed up 20 280 rpm or better• rotary evaporator condenser 1 litre evaporating flask and 1 litre, receiving flask as standard along with instrument.• height adjustment provision 150 ~160 mm• evaporating flask anglecan be adjusted in between 20° to 80°• preferably detachable operating panel• universal heating bath temperature ambient to 200 deg c• heating bath with safety handles and drain spout should be available.• bath over temperature cut off automatically if temperature overshoots by 5°c or runs in dry condition.• bath temperature accuracy:±1• digital display of heating bath for actual and set temperature, • universal movable heating bath can accommodate –up to5 ltr flask• sample distillation capability up to 5 litre• secondary over temperature cut off at 250°c.• condensate surface: 1200cm² or better• paint formula provides much higher resistance against corrosion especially from condensed water.• all parts which are in contact with the media should be consist of graphite filled ptfe vacuum seal.• designed vapor tube with sleeve to added more strength and easily removes from the drive.• voltage frequency 220 240v / 50 hz• protection class – ip 20• certificates: instrument should have iso 9001 : 2008• ce certification• preferably local engineer should be available • warranty 3 years , rotary evaporator specification 13 rotary evaporator• rotation speed up 20 280 rpm or better• rotary evaporator condenser 1 litre evaporating flask and 1 litre, receiving flask as standard along with instrument.• height adjustment provision 150 ~160 mm• evaporating flask anglecan be adjusted in between 20° to 80°• preferably detachable operating panel• universal heating bath temperature ambient to 200 deg c• heating bath with safety handles and drain spout should be available.• bath over temperature cut off automatically if temperature overshoots by 5°c or runs in dry condition.• bath temperature accuracy:±1• digital display of heating bath for actual and set temperature, • universal movable heating bath can accommodate –up to5 ltr flask• sample distillation capability up to 5 litre• secondary over temperature cut off at 250°c.• condensate surface: 1200cm² or better• paint formula provides much higher resistance against corrosion especially from condensed water.• all parts which are in contact with the media should be consist of graphite filled ptfe vacuum seal.• designed vapor tube with sleeve to added more strength and easily removes from the drive.• voltage frequency 220 240v / 50 hz• protection class – ip 20• certificates: instrument should have iso 9001 : 2008• ce certification• preferably local engineer should be available • warranty 3 years , rotary evaporator specification 14 rotary evaporator• rotation speed up 20 280 rpm or better• rotary evaporator condenser 1 litre evaporating flask and 1 litre, receiving flask as standard along with instrument.• height adjustment provision 150 ~160 mm• evaporating flask anglecan be adjusted in between 20° to 80°• preferably detachable operating panel• universal heating bath temperature ambient to 200 deg c• heating bath with safety handles and drain spout should be available.• bath over temperature cut off automatically if temperature overshoots by 5°c or runs in dry condition.• bath temperature accuracy:±1• digital display of heating bath for actual and set temperature, • universal movable heating bath can accommodate –up to5 ltr flask• sample distillation capability up to 5 litre• secondary over temperature cut off at 250°c.• condensate surface: 1200cm² or better• paint formula provides much higher resistance against corrosion especially from condensed water.• all parts which are in contact with the media should be consist of graphite filled ptfe vacuum seal.• designed vapor tube with sleeve to added more strength and easily removes from the drive.• voltage frequency 220 240v / 50 hz• protection class – ip 20• certificates: instrument should have iso 9001 : 2008• ce certification• preferably local engineer should be available • warranty 3 years , rotary evaporator specification 15 rotary evaporator• rotation speed up 20 280 rpm or better• rotary evaporator condenser 1 litre evaporating flask and 1 litre, receiving flask as standard along with instrument.• height adjustment provision 150 ~160 mm• evaporating flask anglecan be adjusted in between 20° to 80°• preferably detachable operating panel• universal heating bath temperature ambient to 200 deg c• heating bath with safety handles and drain spout should be available.• bath over temperature cut off automatically if temperature overshoots by 5°c or runs in dry condition.• bath temperature accuracy:±1• digital display of heating bath for actual and set temperature, • universal movable heating bath can accommodate –up to5 ltr flask• sample distillation capability up to 5 litre• secondary over temperature cut off at 250°c.• condensate surface: 1200cm² or better• paint formula provides much higher resistance against corrosion especially from condensed water.• all parts which are in contact with the media should be consist of graphite filled ptfe vacuum seal.• designed vapor tube with sleeve to added more strength and easily removes from the drive.• voltage frequency 220 240v / 50 hz• protection class – ip 20• certificates: instrument should have iso 9001 : 2008• ce certification• preferably local engineer should be available • warranty 3 years , rotary evaporator specification 16 rotary evaporator• rotation speed up 20 280 rpm or better• rotary evaporator condenser 1 litre evaporating flask and 1 litre, receiving flask as standard along with instrument.• height adjustment provision 150 ~160 mm• evaporating flask anglecan be adjusted in between 20° to 80°• preferably detachable operating panel• universal heating bath temperature ambient to 200 deg c• heating bath with safety handles and drain spout should be available.• bath over temperature cut off automatically if temperature overshoots by 5°c or runs in dry condition.• bath temperature accuracy:±1• digital display of heating bath for actual and set temperature, • universal movable heating bath can accommodate –up to5 ltr flask• sample distillation capability up to 5 litre• secondary over temperature cut off at 250°c.• condensate surface: 1200cm² or better• paint formula provides much higher resistance against corrosion especially from condensed water.• all parts which are in contact with the media should be consist of graphite filled ptfe vacuum seal.• designed vapor tube with sleeve to added more strength and easily removes from the drive.• voltage frequency 220 240v / 50 hz• protection class – ip 20• certificates: instrument should have iso 9001 : 2008• ce certification• preferably local engineer should be available • warranty 3 years , rotary evaporator specification 17 rotary evaporator• rotation speed up 20 280 rpm or better• rotary evaporator condenser 1 litre evaporating flask and 1 litre, receiving flask as standard along with instrument.• height adjustment provision 150 ~160 mm• evaporating flask anglecan be adjusted in between 20° to 80°• preferably detachable operating panel• universal heating bath temperature ambient to 200 deg c• heating bath with safety handles and drain spout should be available.• bath over temperature cut off automatically if temperature overshoots by 5°c or runs in dry condition.• bath temperature accuracy:±1• digital display of heating bath for actual and set temperature, • universal movable heating bath can accommodate –up to5 ltr flask• sample distillation capability up to 5 litre• secondary over temperature cut off at 250°c.• condensate surface: 1200cm² or better• paint formula provides much higher resistance against corrosion especially from condensed water.• all parts which are in contact with the media should be consist of graphite filled ptfe vacuum seal.• designed vapor tube with sleeve to added more strength and easily removes from the drive.• voltage frequency 220 240v / 50 hz• protection class – ip 20• certificates: instrument should have iso 9001 : 2008• ce certification• preferably local engineer should be available • warranty 3 years , rotary evaporator specification 18 rotary evaporator• rotation speed up 20 280 rpm or better• rotary evaporator condenser 1 litre evaporating flask and 1 litre, receiving flask as standard along with instrument.• height adjustment provision 150 ~160 mm• evaporating flask anglecan be adjusted in between 20° to 80°• preferably detachable operating panel• universal heating bath temperature ambient to 200 deg c• heating bath with safety handles and drain spout should be available.• bath over temperature cut off automatically if temperature overshoots by 5°c or runs in dry condition.• bath temperature accuracy:±1• digital display of heating bath for actual and set temperature, • universal movable heating bath can accommodate –up to5 ltr flask• sample distillation capability up to 5 litre• secondary over temperature cut off at 250°c.• condensate surface: 1200cm² or better• paint formula provides much higher resistance against corrosion especially from condensed water.• all parts which are in contact with the media should be consist of graphite filled ptfe vacuum seal.• designed vapor tube with sleeve to added more strength and easily removes from the drive.• voltage frequency 220 240v / 50 hz• protection class – ip 20• certificates: instrument should have iso 9001 : 2008• ce certification• preferably local engineer should be available • warranty 3 years , rotary evaporator specification 19 rotary evaporator• rotation speed up 20 280 rpm or better• rotary evaporator condenser 1 litre evaporating flask and 1 litre, receiving flask as standard along with instrument.• height adjustment provision 150 ~160 mm• evaporating flask anglecan be adjusted in between 20° to 80°• preferably detachable operating panel• universal heating bath temperature ambient to 200 deg c• heating bath with safety handles and drain spout should be available.• bath over temperature cut off automatically if temperature overshoots by 5°c or runs in dry condition.• bath temperature accuracy:±1• digital display of heating bath for actual and set temperature, • universal movable heating bath can accommodate –up to5 ltr flask• sample distillation capability up to 5 litre• secondary over temperature cut off at 250°c.• condensate surface: 1200cm² or better• paint formula provides much higher resistance against corrosion especially from condensed water.• all parts which are in contact with the media should be consist of graphite filled ptfe vacuum seal.• designed vapor tube with sleeve to added more strength and easily removes from the drive.• voltage frequency 220 240v / 50 hz• protection class – ip 20• certificates: instrument should have iso 9001 : 2008• ce certification• preferably local engineer should be available • warranty 3 years , rotary evaporator specification 20 rotary evaporator• rotation speed up 20 280 rpm or better• rotary evaporator condenser 1 litre evaporating flask and 1 litre, receiving flask as standard along with instrument.• height adjustment provision 150 ~160 mm• evaporating flask anglecan be adjusted in between 20° to 80°• preferably detachable operating panel• universal heating bath temperature ambient to 200 deg c• heating bath with safety handles and drain spout should be available.• bath over temperature cut off automatically if temperature overshoots by 5°c or runs in dry condition.• bath temperature accuracy:±1• digital display of heating bath for actual and set temperature, • universal movable heating bath can accommodate –up to5 ltr flask• sample distillation capability up to 5 litre• secondary over temperature cut off at 250°c.• condensate surface: 1200cm² or better• paint formula provides much higher resistance against corrosion especially from condensed water.• all parts which are in contact with the media should be consist of graphite filled ptfe vacuum seal.• designed vapor tube with sleeve to added more strength and easily removes from the drive.• voltage frequency 220 240v / 50 hz• protection class – ip 20• certificates: instrument should have iso 9001 : 2008• ce certification• preferably local engineer should be available • warranty 3 years , rotary evaporator specification 21 rotary evaporator• rotation speed up 20 280 rpm or better• rotary evaporator condenser 1 litre evaporating flask and 1 litre, receiving flask as standard along with instrument.• height adjustment provision 150 ~160 mm• evaporating flask anglecan be adjusted in between 20° to 80°• preferably detachable operating panel• universal heating bath temperature ambient to 200 deg c• heating bath with safety handles and drain spout should be available.• bath over temperature cut off automatically if temperature overshoots by 5°c or runs in dry condition.• bath temperature accuracy:±1• digital display of heating bath for actual and set temperature, • universal movable heating bath can accommodate –up to5 ltr flask• sample distillation capability up to 5 litre• secondary over temperature cut off at 250°c.• condensate surface: 1200cm² or better• paint formula provides much higher resistance against corrosion especially from condensed water.• all parts which are in contact with the media should be consist of graphite filled ptfe vacuum seal.• designed vapor tube with sleeve to added more strength and easily removes from the drive.• voltage frequency 220 240v / 50 hz• protection class – ip 20• certificates: instrument should have iso 9001 : 2008• ce certification• preferably local engineer should be available • warranty 3 years , rotary evaporator specification 22 rotary evaporator• rotation speed up 20 280 rpm or better• rotary evaporator condenser 1 litre evaporating flask and 1 litre, receiving flask as standard along with instrument.• height adjustment provision 150 ~160 mm• evaporating flask anglecan be adjusted in between 20° to 80°• preferably detachable operating panel• universal heating bath temperature ambient to 200 deg c• heating bath with safety handles and drain spout should be available.• bath over temperature cut off automatically if temperature overshoots by 5°c or runs in dry condition.• bath temperature accuracy:±1• digital display of heating bath for actual and set temperature, • universal movable heating bath can accommodate –up to5 ltr flask• sample distillation capability up to 5 litre• secondary over temperature cut off at 250°c.• condensate surface: 1200cm² or better• paint formula provides much higher resistance against corrosion especially from condensed water.• all parts which are in contact with the media should be consist of graphite filled ptfe vacuum seal.• designed vapor tube with sleeve to added more strength and easily removes from the drive.• voltage frequency 220 240v / 50 hz• protection class – ip 20• certificates: instrument should have iso 9001 : 2008• ce certification• preferably local engineer should be available • warranty 3 years , rotary evaporator specification 23 rotary evaporator• rotation speed up 20 280 rpm or better• rotary evaporator condenser 1 litre evaporating flask and 1 litre, receiving flask as standard along with instrument.• height adjustment provision 150 ~160 mm• evaporating flask anglecan be adjusted in between 20° to 80°• preferably detachable operating panel• universal heating bath temperature ambient to 200 deg c• heating bath with safety handles and drain spout should be available.• bath over temperature cut off automatically if temperature overshoots by 5°c or runs in dry condition.• bath temperature accuracy:±1• digital display of heating bath for actual and set temperature, • universal movable heating bath can accommodate –up to5 ltr flask• sample distillation capability up to 5 litre• secondary over temperature cut off at 250°c.• condensate surface: 1200cm² or better• paint formula provides much higher resistance against corrosion especially from condensed water.• all parts which are in contact with the media should be consist of graphite filled ptfe vacuum seal.• designed vapor tube with sleeve to added more strength and easily removes from the drive.• voltage frequency 220 240v / 50 hz• protection class – ip 20• certificates: instrument should have iso 9001 : 2008• ce certification• preferably local engineer should be available • warranty 3 years , rotary evaporator specification 24 rotary evaporator• rotation speed up 20 280 rpm or better• rotary evaporator condenser 1 litre evaporating flask and 1 litre, receiving flask as standard along with instrument.• height adjustment provision 150 ~160 mm• evaporating flask anglecan be adjusted in between 20° to 80°• preferably detachable operating panel• universal heating bath temperature ambient to 200 deg c• heating bath with safety handles and drain spout should be available.• bath over temperature cut off automatically if temperature overshoots by 5°c or runs in dry condition.• bath temperature accuracy:±1• digital display of heating bath for actual and set temperature, • universal movable heating bath can accommodate –up to5 ltr flask• sample distillation capability up to 5 litre• secondary over temperature cut off at 250°c.• condensate surface: 1200cm² or better• paint formula provides much higher resistance against corrosion especially from condensed water.• all parts which are in contact with the media should be consist of graphite filled ptfe vacuum seal.• designed vapor tube with sleeve to added more strength and easily removes from the drive.• voltage frequency 220 240v / 50 hz• protection class – ip 20• certificates: instrument should have iso 9001 : 2008• ce certification• preferably local engineer should be available • warranty 3 years , chiller specification 1 •chiller:temperature ranges from 0ºc to +100 ºc • precise temperature controller of ± 0.2ºc• reservoir capacity should be more than 5 liters digital display of actual and set temperature • temperature stability ±0.07°c• maximum pressure: 1.5psi ( 0.10 bars ) maximum pressure flow rate 10 liter / min certificates: instrument should have iso 9001 : 2008, ce certification• preferably local engineershould be available • warranty: 3 years , chiller specification 2 •chiller:temperature ranges from 0ºc to +100 ºc • precise temperature controller of ± 0.2ºc• reservoir capacity should be more than 5 liters digital display of actual and set temperature • temperature stability ±0.07°c• maximum pressure: 1.5psi ( 0.10 bars ) maximum pressure flow rate 10 liter / min certificates: instrument should have iso 9001 : 2008, ce certification• preferably local engineershould be available • warranty: 3 years , chiller specification 3 •chiller:temperature ranges from 0ºc to +100 ºc • precise temperature controller of ± 0.2ºc• reservoir capacity should be more than 5 liters digital display of actual and set temperature • temperature stability ±0.07°c• maximum pressure: 1.5psi ( 0.10 bars ) maximum pressure flow rate 10 liter / min certificates: instrument should have iso 9001 : 2008, ce certification• preferably local engineershould be available • warranty: 3 years , chiller specification 4 •chiller:temperature ranges from 0ºc to +100 ºc • precise temperature controller of ± 0.2ºc• reservoir capacity should be more than 5 liters digital display of actual and set temperature • temperature stability ±0.07°c• maximum pressure: 1.5psi ( 0.10 bars ) maximum pressure flow rate 10 liter / min certificates: instrument should have iso 9001 : 2008, ce certification• preferably local engineershould be available • warranty: 3 years , chiller specification 5 •chiller:temperature ranges from 0ºc to +100 ºc • precise temperature controller of ± 0.2ºc• reservoir capacity should be more than 5 liters digital display of actual and set temperature • temperature stability ±0.07°c• maximum pressure: 1.5psi ( 0.10 bars ) maximum pressure flow rate 10 liter / min certificates: instrument should have iso 9001 : 2008, ce certification• preferably local engineershould be available • warranty: 3 years , chiller specification 6 •chiller:temperature ranges from 0ºc to +100 ºc • precise temperature controller of ± 0.2ºc• reservoir capacity should be more than 5 liters digital display of actual and set temperature • temperature stability ±0.07°c• maximum pressure: 1.5psi ( 0.10 bars ) maximum pressure flow rate 10 liter / min certificates: instrument should have iso 9001 : 2008, ce certification• preferably local engineershould be available • warranty: 3 years , chiller specification 7 •chiller:temperature ranges from 0ºc to +100 ºc • precise temperature controller of ± 0.2ºc• reservoir capacity should be more than 5 liters digital display of actual and set temperature • temperature stability ±0.07°c• maximum pressure: 1.5psi ( 0.10 bars ) maximum pressure flow rate 10 liter / min certificates: instrument should have iso 9001 : 2008, ce certification• preferably local engineershould be available • warranty: 3 years , vaccum pump 1 3 double stage rotary vane vacuum pump1. pumping speed should be higher than 18m3 / h with flange connection ( inlet & outlet ) 2. ultimate pressure: 0.002 mbar without gas ballast.3. three phase motor with a power of 0.75 / 0.55 ( hp / kw ) , weight less than 38 kg. , vaccum pump 2 4 double stage rotary vane vacuum pump1. pumping speed should be higher than 18m3 / h with flange connection ( inlet & outlet ) 2. ultimate pressure: 0.002 mbar without gas ballast.3. three phase motor with a power of 0.75 / 0.55 ( hp / kw ) , weight less than , vaccum pump 3 5 double stage rotary vane vacuum pump1. pumping speed should be higher than 18m3 / h with flange connection ( inlet & outlet ) 2. ultimate pressure: 0.002 mbar without gas ballast.3. three phase motor with a power of 0.75 / 0.55 ( hp / kw ) , weight less than , vaccum pump 4 6 double stage rotary vane vacuum pump1. pumping speed should be higher than 18m3 / h with flange connection ( inlet & outlet ) 2. ultimate pressure: 0.002 mbar without gas ballast.3. three phase motor with a power of 0.75 / 0.55 ( hp / kw ) , weight less than , vaccum pump 5 7 double stage rotary vane vacuum pump1. pumping speed should be higher than 18m3 / h with flange connection ( inlet & outlet ) 2. ultimate pressure: 0.002 mbar without gas ballast.3. three phase motor with a power of 0.75 / 0.55 ( hp / kw ) , weight less than , vaccum pump 6 8 double stage rotary vane vacuum pump1. pumping speed should be higher than 18m3 / h with flange connection ( inlet & outlet ) 2. ultimate pressure: 0.002 mbar without gas ballast.3. three phase motor with a power of 0.75 / 0.55 ( hp / kw ) , weight less than , vaccum pump 7 9 double stage rotary vane vacuum pump1. pumping speed should be higher than 18m3 / h with flange connection ( inlet & outlet ) 2. ultimate pressure: 0.002 mbar without gas ballast.3. three phase motor with a power of 0.75 / 0.55 ( hp / kw ) , weight less than?? , vaccum pump 8 10 double stage rotary vane vacuum pump1. pumping speed should be higher than 18m3 / h with flange connection ( inlet & outlet ) 2. ultimate pressure: 0.002 mbar without gas ballast.3. three phase motor with a power of 0.75 / 0.55 ( hp / kw ) , weight less tha total quantity : 1...

Commerce And Science College - Maharashtra

30001932 supply of differential scanning calorineter, uplc, uv visible spectrophotometer, rotary evaporator, attenuated ir, up gradation of auto analyzer, toc analyzer, double beam double monochromator based uv visible spectrophotometer....

College of Arts and Science - Maharashtra

26721905 supply of di probe for mass spectrophotometer, thermo gravimetric differential thermal analyzer, dlatgs detector, rotary evaporator, autosampler, pda detector for lms system, x ray diffraction xrd, bioluminers for bioautographic analysis....

Rashtriya Uchchatar Shiksha Abhiyan - Maharashtra

26532545 purchase of laboratory equipments under rusa for arts commerce and science college lanja 1 flame photometer 2 double beam spectrophotometer 3 visible spectrophotometer 4 digital ph meter 5 six point ph analyzer 6 autoclave 7 centrifuge 8 microcentrifuge 9 analytical balance 10 precision balance 11 magnetic stirrer 12 magnetic stirrer with heating function 13 pipette pump 14 solvent filtration assembly 15 micropipettes 16 vortex mixer 17 electric sterilizer 18 distillation unit 19 gel viewing system 20 submarine electrophoresis unit 21 vertical electrophoresis unit 22 power pack 23 incubator cum oven 24 ultrasonicator 25 rotary evaporator 26 laminar air flow 27 colorimeter...

Department Of Atomic Energy - Maharashtra

26475044 packing, supply, safe delivery, installation, warranty, training, guarantee, service of rotary evaporator, vacuum pump & chiller as per attached annexure...

Council Of Scientific And Industrial Research - Maharashtra

26383795 procurement of rotary evaporator rotary evaporator , price for rotary evaporator , rotary evaporator , rv 10 auto pro v ( detail specifications/requirement as per chapter 4 of tender ) , rv 10 . 90 evaporation flask ns 24/29 50 ml ( detail specifications/requirement as per chapter 4 of tender ) , rv 10 . 91 evaporation flask ns 24/29 100 ml ( detail specifications/requirement as per chapter 4 of tender ) , rv 10 . 83 evaporation flask ns 29/32 500 ml ( detail specifications/requirement as per chapter 4 of tender ) , warranty charges , if any , installation and commissioning charges , if any , freight ( including loading & unloading ) & insurance charges for csir ncl , if any , other charges , if any...

Indian Institute Of Technology - Maharashtra

26298875 eoi for supply of listed items a precision diamond scriber for wafer scribing a 8 channel arbitrary waveform generator, with sampling rate of minimum 1 gsa / s fourier transform infrared spectroscope contact angle meter / optical tensiometer potentiostat / electrochemical system with eqcm thermal analysis of materials tga and dsc n2 plasma cells and its accessories cryogen free dilution refrigerator aerobic / anaerobic respirometer system combined wireless fnirs and wireless eeg system t2sl epi wafer mwir ultrafast ti:sapphire amplifier mixed signal oscilloscope optical table, hybrid damped smarttable solid state femtosecond laser with dpss pump laser gas chromatography mass spectrometr gcms stopped flow fluorescence spectrometer fully automated robotic workstation magnetic property measuring system ( mpms atomic force microscopy ( afm ) microwave synthesizer 1.5 scanning mobility particle sizer optical particle sizer, dusttrak drx aerosol monitor and aerosol neutralizer for smps beta attenuation monitor: portable bam cross beam / dual beam with laser attachment vector signal generator high pressure temperature controlled direct shear and triaxial system optical spectrum analyser rotary evaporator system next generation sequencing ( ngs ) platform highly sensitive potentiostat / galvanostat glyconeer 2.1 automated oligosaccharide synthesizer high voltage nanosecond pulse electric field generator scmos sensor based monochrome camera non contact metrology system optical 3d coordinate measurement machine ( cmm ) contact type profilometer factsage thermodynamic software glow discharge optical emission spectroscope integrated infra red based nanoscale atomic force microscope ecvt multiphase flow system xrd mill mccrone cdte x ray soft and hard detector analytical ultra centrifuge multi cultivator for cultivation of photosynthetic organisms particle size analyzer single tilt heating holder tem based local orientation and strain carbonaceous aerosol speciation system ( cass ) micro ct and optical imaging for animal imaging facility multiphoton imaging equipment for live animal imaging cryofree 9 tesla superconducting magnet nmr spectrometer for solids high throughput imaging system ultramicrotome lattice light sheet microscope multi angle dynamic light scattering ( mals ) system thermal conductivity measurement aberration corrected tem system for soft materials with cryo capability. raman spectrometer close cycle cryostat field emission scanning electron microscope polymer processing facility consisting of bench top lab scale twin screw extruder with mini injection moulding machine and accessories differential interference contrast ( dic ) reflected light optical microscope. benchtop stylus profilometer external pattern generating system preparative hplc gpc hplc gel scanner optical tweezers spectrofluorimeter cryogen free physical property measurement system ( ppms ) tlc masss bench top equipment react ir in situ ft ir spectroscopy instrument atr ftir spectrophotometer benchtop 3d bioprinters highperformancecomputingcluster ( hpcc ) space time3 ferroelectric characterization unit contact type profilometer gel scanner with fluorescence solid state nmr ( ss nmr ) spectrometer operating at 400 mhz microbalance system for weighing the samples accurately microwave synthesis system with magnetic stirring at both low and high temperatures at high pressures. dynamic light scattering with zeta potential set up gas chromatography equipped with mass spectrometry with autoinjector melting point apparatus for parallel boiling point detection system tg dta / photoionization mass spectrometer and dsc with capabilities power device characterization system ( pdcs semi preparative liquid chromatography system ( hplc ) for automated purification equipped with a photo array detector, automated injection and fraction collection and columns spectrofluorometer with capabilities of a continuous 150w ozone free xenon source delivering excitation light from 230nm to the nir, nir detector ( 800nm 1550nm ) , liquid cuvette, solid sample holder, peltier accessory, bandpass filters and adapter and stopped flow accessory. uv visible spectrophotometers with capabilities: wavelength range : 185 nm – 3300 nm; 0.1 nm resolution, double beam photometric system, double monochromator grating and integrating sphere attachment. super micro black cell, film holder and powdered sample holder for integrating shpere. solution state nmr spectrometer operating at 600 mhz frequency having minimum three channels with capabilities of recoding multiple nuclei ss nmr ( broadband probe ) , and multi dimensional 2d and 3d nmr measurements with operating temperature range of 20 oc +80 oc ( 3 channel probe for proton detection and 15n / 13c decoupling ) . high purity ingots of aluminium, arsenic, beryllium, gallium, indium, antimonide – source materials for molecular beam epitaxy system arbitrary waveform generator time correlation counter for single photons gas and solvent ( vapour ) sorption analyser high purity nitrogen gas generator, ( 99.9995% purity, co2 / co <1 ppm ) with flow rate of 10l / mi high performance computing ( hpc ) facility with online ups, networking switch, and software. isothermal titration microcalorimeter cameras and accessories for motion capture system 3 d printer for cement concrete refrigerated incubator shaker multi mode reader with accessories tetrad dissection microscope high performance electron beam lithography system for advanced nanolithography. dual chamber sputtering system reactive ion etching ( rie ) based inductively coupled plasma ( icp ) source system is required. plasma processing system oxygen / nitrogen elemental analyzer. laser for single and two photon ceramic microstereolithography constant rate strain ( crs ) thermal consolidation apparatus time corelated single photon counter ( tcspc ) system is an upgradation of an existing photoluminescence spectroscopy system which is capable of steady state measurements only. with tcspc system, fluorescence lifetime can be measured with the temporal resolution of 50 100ps. measurement time window is 65ns 250ms. tcspc uv / vis detector has a spectral range of 220 650nm. source wavelength range is 300 800 nm. count depth is 106 counts per readout. deep reactive ion etching ( drie ) system for etching silicon carbide substrate used in the fabrication of high electron mobility transistors ( hemts ) . the system comes with gas lines and mfcs ( cl2, ar, o2, sf6, bcl3 and cf4 ) , separate reaction and load lock chamber ( rc & ll ) with highly efficient separate vacuum systems for each, plasma generator power / bias rating of 1 kw / 300 w with a max. power upgrade of 600 w delivering a significantly high etch rates for sic providing sharp edge contours. digital processing confocal scanning violet laser microscope with ultra high temperature infrared heating furnace system. a network attached storage facility with high storage space, server to host, necessary backup / raid tools, and ups. x ray photoelectron spectroscopy ( xps ) upgrades of existing versaprobe ii system from physical electronics usa consisting of leips ( low energy inverse photoelectron spectroscopy ) with filters, scanning auger spectroscopy, various sample holders capable of high temperature and sample bias, pressure gauge, vacuum transfer vessel and new analysis software. 1 ) basic plasma cleaner capable of bonding glass pdms or pdms pdms for fabrication of microfluidic application. it should also be able to activate and sterile pdms a multi material 200 mm atomic layer deposition system capable of depositing various oxides, nitrides, and metals using thermal as well as plasma assisted processes, low vapour pressure ( 0.01 torr ) precursors, ozone, at temperatures upto 500 c, with load lock, in situ thin film analysis capability, software and vacuum pump. a 200 mm surface profilometer with motorized x / y stage, 4 a step height repeatability, as well as stitching, 3d mapping and 2d stress measurement capabilities in automated fashion. table top precision lithography tool with raster scan and vector scanning capabilities. the system must have the capability of lithographic writing as well as maskless or direct writing of patterns on samples it is a high power high heat based plasma system for photoresist ashing. strong ashing rate of 24nm / s is needed. standalone rapid thermal processing ( rtp ) system with vertical configuration for reduced foot print, cold wall process chamber with at least 100 mm wafer capability, fully automated anechoic chamber till 110 ghz for 5g and higher standards multi phase realative permeability rig multimode microplate reader ( with absorbance, fluorescence and luminescence measurement capability ) ceramic 3d printer system super resolution ( sr ) microscope imaging platform. cubic immersive virtual reality system 80 ult freezer fplc ( fast protein liquid chromatography ) system for separation of biomolecules refrigerated centrifuge refrigerated orbital shaker digital slope inclinometer system vibrating wire transducer based contact type earth pressure sensors lab oc ec aerosol analyzer flight simulator software in loop simulation ( sils ) facility gas turbine engine with instrumentation nanoparticle tracking analyzer atomic emission spectrometer ( icp aes ) tap kpc ( temporal analysis of products – kinetic processing and characterisation ) multi experiment system wide angle x ray diffractometer with high temperature and electrochemical minivol tas pm2.5 and pm10 sampler, test electronics mainframe, upto 8 slots, automated data acquisition and test software thermal conductivity / diffusivity measurement apparatus gravimetric fuel flow meter core saturator is used to saturate completely vacuumed solid core samples by injecting co2 / n2 / ch4 gases and oil / water / brine liquid phases at variable pressure as per requirement. helium porosimeter can measure the porosity and density of solid core samples by saturating the cores with helium through isothermal expansion. drill press is used to cut core samples of variable length and diameter from blocks of geomaterials / building materials. core samples are extracted using diamond mounted motorized drill bits with hand operated lifting mechanism. trim saw with end face grinder is used forprecision cutting and smooth, parallel face preparation of rock samples and concrete using motorized low vibration diamond mounted blades. the flash differential scanning calorimetry ( flash dsc chip nanocalorimetry ) revolutionizes rapid scanning dsc. the instrument can analyse reorganization processes that were previously impossible to measure. the flash dsc is way superior to conventional dsc with heating and cooling rates ( k / s ) that cover a range of more than 7 decades. moreover, to the best of our knowledge this unique instrument is going to be the first of its kind in the country till date. test electronics power, analog, digital cards for the mainframe, upto 8 slots compatible to automated data acquisition and test software test dewar, 2stage closed cycle water cooled compressor, with 100 pin chip carrier and filter assembly kit and controller reactithermm with accessories hplc with diode array detector and fluorescence detector portable raman spectrometer ultra precision machining ( upm ) system additive subtractive ( hybrid ) manufacturing system for metals and accessories. electron beam additive machine high frequency fatigue system and accessories. transient absorption spectrometer system stopped flow spectrometer multi mode microplate reader wedge type heat sealing machine...

Department of Higher Education - Maharashtra

26296455 eoi for supply of listed items 1 1 prof. s. mahapatra physics a precision diamond scriber for wafer scribing 2 2 prof. s. mahapatra physics a 8 channel arbitrary waveform generator, with sampling rate of minimum 1 gsa/s 3 3 prof. swatantra pratap singh fourier transform infrared spectroscope 4 4 prof. swatantra pratap singh contact angle meter/optical tensiometer 5 5 prof. swatantra pratap singh potentiostat/ electrochemical system with eqcm 6 6 chemical engg. thermal analysis of materials tga and dsc 7 7 prof. apurba laha electrical engg. n2 plasma cells and its accessories 8 8 prof. s. mahapatra physics cryogen free dilution refrigerator 9 9 prof. munish chandel aerobic/anaerobic respirometer system 10 10 prof . rashmi gupta combined wireless fnirs and wireless eeg system 11 12 prof. b. g. fernandes electrical engg. t2sl epi wafer mwir 12 13 prof. dipanshu bansal mechanical engg. ultrafast ti:sapphire amplifier 13 14 prof. swaroop ganguly electrical engg. mixed signal oscilloscope 14 15 prof. swaroop ganguly electrical engg. optical table, hybrid damped smarttable 15 16 prof. deepak marla mechanical engg. solid state femtosecond laser with dpss pump laser 16 17 prof. m. ramaswamy chemistry gas chromatography mass spectrometr gcms 17 18 prof. anindya dutta chemistry stopped flow fluorescence spectrometer 18 19 prof. anindya dutta chemistry fully automated robotic workstation 19 20 prof. anindya dutta chemistry magnetic property measuring system (mpms 20 21 prof. anindya dutta chemistry atomic force microscopy (afm) 21 22 prof. anindya dutta chemistry microwave synthesizer 1.5 22 23 prof. manoranjan sahu scanning mobility particle sizer 23 24 prof. manoranjan sahu optical particle sizer, dusttrak drx aerosol monitor and aerosol neutralizer for smps 24 25 prof. manoranjan sahu beta attenuation monitor: portable bam 25 26 prof. sushil mishra mechanical engg. cross beam / dual beam with laser attachment 26 27 prof. s. mahapatra physics vector signal generator 27 29 prof. ashish juneja civil engg. high pressure temperature controlled direct shear and triaxial system 28 30 prof. anshuman kumar physics optical spectrum analyser 29 31 prof. suvarn s. kulkarni chemistry rotary evaporator system 30 32 prof. santanu k. ghosh next generation sequencing (ngs) platform 31 33 prof. arnab dutta chemistry highly sensitive potentiostat/ galvanostat environmental science & engg. environmental science & engg. environmental science & engg. prof. guruswamy kumaraswamy environmental science & engg. humanities & social sciences environmental science & engg. environmental science & engg. environmental science & engg. biosciences & bio engg. 32 34 prof. anindya dutta chemistry glyconeer 2.1 automated oligosaccharide synthesizer 33 35 prof. rochish m thaokar chemical engg. high voltage nanosecond pulse electric field generator 34 36 prof. rochish m thaokar chemical engg. scmos sensor based monochrome camera 35 37 prof. soham mujumdar mechanical engg. non contact metrology system 36 38 prof. soham mujumdar mechanical engg. optical 3d coordinate measurement machine (cmm) 37 39 prof. soham mujumdar mechanical engg. contact type profilometer 38 40 prof. deepoo kumar factsage thermodynamic software 39 41 prof. v.s.raja glow discharge optical emission spectroscope 40 42 prof. s. chandramouli chemistry integrated infra red based nanoscale atomic force microscope 41 43 prof. atul srivastava mechanical engg. ecvt multiphase flow system 42 45 prof. a. k. sridharan civil engg. xrd mill mccrone 43 46 prof. varun bhalerao physics cdte x ray soft and hard detector 44 47 prof. ashutosh kumar analytical ultra centrifuge 45 48 prof. pramod wangikar chemical engg. multi cultivator for cultivation of photosynthetic organisms 46 49 prof. sudarshan kumar aerospace engg. particle size analyzer 47 50 prof. indradev samajdar single tilt heating holder 48 51 prof. indradev samajdar tem based local orientation and strain 49 52 prof. abhishek chakraborty carbonaceous aerosol speciation system (cass) 50 53 prof. rahul purwar micro ct and optical imaging for animal imaging facility 51 54 prof. prakriti tayalia multiphoton imaging equipment for live animal imaging 52 55 prof. a. v. mahajan physics cryofree 9 tesla superconducting magnet 53 56 prof. a. v. mahajan physics nmr spectrometer for solids 54 57 prof. anirban banerjee high throughput imaging system 55 58 prof. anirban banerjee ultramicrotome 56 59 prof. anirban banerjee lattice light sheet microscope 57 60 prof. r. srivastava. multi angle dynamic light scattering (mals) system 58 61 prof. amit singh mechanical engg. thermal conductivity measurement 59 62 prof. jayesh bellare chemical engg. aberration corrected tem system for soft materials with cryo capability. 60 63 prof. jayesh bellare chemical engg. 61 64 prof. dipanshu bansal mechanical engg. raman spectrometer 62 65 prof. dipanshu bansal mechanical engg. close cycle cryostat 63 66 prof. kantimay das gupta physics field emission scanning electron microscope metallurgical engg. & materials science metallurgical engg. & materials science biosciences & bio engg. metallurgical engg. & materials science metallurgical engg. & materials science environmental science & engg. biosciences & bio engg. biosciences & bio engg. biosciences & bio engg. biosciences & bio engg. biosciences & bio engg. biosciences & bio engg. polymer processing facility consisting of bench top lab scale twin screw extruder with mini injection moulding machine and accessories sheet1 page 3 64 67 prof. kantimay das gupta physics differential interference contrast (dic) reflected light optical microscope. 65 68 prof. kantimay das gupta physics benchtop stylus profilometer 66 69 prof. s. mahapatra physics external pattern generating system 67 70 prof. anindya datta chemistry preparative hplc 68 71 prof. anindya datta chemistry gpc hplc 69 72 prof. pradeep kumar p. i. chemistry gel scanner 70 73 prof ambarish kunwar optical tweezers 71 74 prof. anindya datta chemistry spectrofluorimeter 72 75 prof. r. murugavel chemistry cryogen free physical property measurement system (ppms) 73 76 prof. santosh j. gharpure chemistry tlc masss bench top equipment 74 77 prof. goutam kumar chemistry react ir in situ ft ir spectroscopy instrument 75 78 prof. anindya datta chemistry atr ftir spectrophotometer 76 79 prof. abhijit majumder benchtop 3d bioprinters 77 80 prof. sharad bhartiya computer center highperformancecomputingcluster(hpcc) space time3 78 81 prof. swaroop ganguly electrical engg. ferroelectric characterization unit 79 82 prof. soham mujumdar mechanical engg. contact type profilometer 80 83 prof. ruchi anand chemistry gel scanner with fluorescence 81 84 prof. anindya datta chemistry solid state nmr (ss nmr) spectrometer operating at 400 mhz 82 85 prof. anindya datta chemistry 83 86 prof. anindya datta chemistry microbalance system for weighing the samples accurately 84 87 prof. anindya datta chemistry microwave synthesis system with magnetic stirring at both low and high temperatures at high pressures. 85 88 prof. anindya datta chemistry 86 89 prof. anindya datta chemistry dynamic light scattering with zeta potential set up 87 90 prof. anindya datta chemistry gas chromatography equipped with mass spectrometry with autoinjector 88 91 prof. anindya datta chemistry melting point apparatus for parallel boiling point detection system 89 92 prof. anindya datta chemistry 90 93 prof. anindya datta chemistry 91 94 prof. anindya datta chemistry tg dta/photoionization mass spectrometer and dsc with capabilities 92 95 electrical engg. 93 96 prof saurabh lodha electrical engg. power device characterization system (pdcs biosciences & bio engg. biosciences & bio engg. semi preparative liquid chromatography system (hplc) for automated purification equipped with a photo diode array detector, automated injection and fraction collection and columns spectrofluorometer with capabilities of a continuous 150w ozone free xenon source delivering excitation light from 230nm to the nir, nir detector (800nm 1550nm), liquid cuvette, solid sample holder, peltier accessory, bandpass filters and adapter and stopped flow accessory. uv visible spectrophotometers with capabilities: wavelength range : 185 nm – 3300 nm; 0.1 nm resolution, double beam photometric system, double monochromator grating and integrating sphere attachment. super micro black cell, film holder and powdered sample holder for integrating shpere. solution state nmr spectrometer operating at 600 mhz frequency having minimum three channels with capabilities of recoding multiple nuclei ss nmr (broadband probe), and multi dimensional 2d and 3d nmr measurements with operating temperature range of 20 oc +80 oc (3 channel probe for proton detection and 15n/13c decoupling). high purity ingots of aluminium, arsenic, beryllium, gallium, indium, antimonide – source materials for the molecular beam epitaxy system page 4 94 97 prof. kasturi saha electrical engg. arbitrary waveform generator 95 98 prof. kasturi saha electrical engg. time correlation counter for single photons 96 99 prof. swaroop ganguly electrical engg. 97 100 prof. saurabh lodha electrical engg. 98 101 prof. kamendra sharma chemistry gas and solvent (vapour) sorption analyser 99 102 prof. anindya datta chemistry high purity nitrogen gas generator, (99.9995% purity, co2/co <1 ppm) with flow rate of 10l/mi 100 103 prof . deepoo kumar 101 104 prof. ranjith padinhateeri 102 105 prof. ranjith padinhateeri high performance computing (hpc) facility with online ups, networking switch, and software. 103 106 prof. ashutosh kumar isothermal titration microcalorimeter 104 110 prof. vivek sangwan cameras and accessories for motion capture system 105 111 civil engg. 3 d printer for cement concrete 106 112 prof. saurabh lodha electrical engg. 107 113 prof. abhijit mujumdar chemical engg. 108 114 prof. supreet saini chemical engg. refrigerated incubator shaker 109 115 prof. supreet saini chemical engg. multi mode reader with accessories 110 116 prof. supreet saini chemical engg. tetrad dissection microscope 111 117 prof. saurabh lodha electrical engg. 112 118 prof. saurabh lodha electrical engg. 113 119 prof. saurabh lodha electrical engg. high performance electron beam lithography system for advanced nanolithography. 114 120 prof. saurabh lodha electrical engg. 115 121 prof. saurabh lodha electrical engg. dual chamber sputtering system 116 122 prof. saurabh lodha electrical engg. 117 123 prof. saurabh lodha electrical engg. 118 124 prof. saurabh lodha electrical engg. reactive ion etching (rie) based inductively coupled plasma (icp) source system is required. 119 125 prof. saurabh lodha electrical engg. plasma processing system 120 126 prof. manish m. pande oxygen/nitrogen elemental analyzer. 121 127 prof. prasanna gandhi mechanical engg. laser for single and two photon ceramic microstereolithography 122 128 prof. prasenjit basu civil engg. constant rate strain (crs) thermal consolidation apparatus time corelated single photon counter (tcspc) system is an upgradation of an existing photoluminescence spectroscopy system which is capable of steady state measurements only. with tcspc system, fluorescence lifetime can be measured with the temporal resolution of 50 100ps. measurement time window is 65ns 250ms. tcspc uv/vis detector has a spectral range of 220 650nm. source wavelength range is 300 800 nm. count depth is 106 counts per readout. deep reactive ion etching (drie) system for etching silicon carbide substrate used in the fabrication of high electron mobility transistors (hemts). the system comes with gas lines and mfcs (cl2, ar, o2, sf6, bcl3 and cf4), separate reaction and load lock chamber (rc & ll) with highly efficient separate vacuum systems for each, plasma generator power/bias rating of 1 kw/300 w with a max. power upgrade of 600 w delivering a significantly high etch rates for sic providing sharp edge contours. metallurgical engg. & materials science digital processing confocal scanning violet laser microscope with ultra high temperature infrared heating furnace system. biosciences & bio engg. a network attached storage facility with high storage space, server to host, necessary backup/raid tools, and ups. biosciences & bio engg. biosciences & bio engg. mechanical engineering prof. prakash nanthagopalan x ray photoelectron spectroscopy (xps) upgrades of existing versaprobe ii system from physical electronics usa consisting of leips (low energy inverse photoelectron spectroscopy) with filters, scanning auger spectroscopy, various sample holders capable of high temperature and sample bias, pressure gauge, vacuum transfer vessel and new analysis software. 1) basic plasma cleaner capable of bonding glass pdms or pdms pdms for fabrication of microfluidic application. it should also be able to activate and sterile pdms a multi material 200 mm atomic layer deposition system capable of depositing various oxides, nitrides, and metals using thermal as well as plasma assisted processes, low vapour pressure (0.01 torr) precursors, ozone, at temperatures upto 500 c, with load lock, in situ thin film analysis capability, software and vacuum pump. a 200 mm surface profilometer with motorized x/y stage, 4 a step height repeatability, as well as stitching, 3d mapping and 2d stress measurement capabilities in automated fashion. table top precision lithography tool with raster scan and vector scanning capabilities. the system must have the capability of lithographic writing as well as maskless or direct writing of patterns on samples it is a high power high heat based plasma system for photoresist ashing. strong ashing rate of 24nm / s is needed. standalone rapid thermal processing (rtp) system with vertical configuration for reduced foot print, cold wall process chamber with at least 100 mm wafer capability, metallurgical engg. & materials science 123 129 prof. jayanta mukherjee electrical engg. fully automated anechoic chamber till 110 ghz for 5g and higher standards 124 130 prof. vikram vishal earth sciences 125 131 prof. vikram vishal earth sciences multi phase realative permeability rig 126 132 prof. vikram vishal earth sciences 127 133 prof.vikram vishal earth sciences 128 134 prof.vikram vishal earth sciences 129 135 prof. anirban banerjee multimode microplate reader (with absorbance, fluorescence and luminescence measurement capability) 130 136 prof. prasanna gandhi mechanical engg. ceramic 3d printer system 131 137 prof. mithun chowdhury 132 138 prof. santanu k. ghosh super resolution (sr) microscope imaging platform. 133 139 prof. p. vedgiri civil engg. cubic immersive virtual reality system 134 141 prof. ishita sengupta chemistry 80 ult freezer 135 143 prof. ishita sengupta chemistry fplc (fast protein liquid chromatography) system for separation of biomolecules 136 144 prof. ishita sengupta chemistry refrigerated centrifuge 137 145 prof. ishita sengupta chemistry refrigerated orbital shaker 138 146 prof. dasaka s. murty civil engg. digital slope inclinometer system 139 147 prof. dasaka s. murty civil engg. vibrating wire transducer based contact type earth pressure sensors 140 148 prof. abhishek chakraborty lab oc ec aerosol analyzer 141 150 prof. arnab maity aerospace engg. flight simulator 142 151 prof. arnab maity aerospace engg. software in loop simulation (sils) facility 143 152 prof. arnab maity aerospace engg. gas turbine engine with instrumentation 144 153 prof. ravi gudi chemical engg. nanoparticle tracking analyzer 145 154 prof. ravi gudi chemical engg. atomic emission spectrometer (icp aes) 146 155 prof. ravi gudi chemical engg. tap kpc (temporal analysis of products – kinetic processing and characterisation) multi experiment system 147 156 prof. ravi gudi chemical engg. wide angle x ray diffractometer with high temperature and electrochemical 148 157 prof. abhishek chakraborty minivol tas pm2.5 and pm10 sampler, 149 158 electrical engg. 150 159 electrical engg. test electronics mainframe, upto 8 slots, automated data acquisition and test software 151 160 electrical engg. 152 161 prof. titas dasgupta thermal conductivity/diffusivity measurement apparatus 153 162 prof. asish k. sarangi gravimetric fuel flow meter core saturator is used to saturate completely vacuumed solid core samples by injecting co2/n2/ch4 gases and oil/water/brine liquid phases at variable pressure as per requirement. helium porosimeter can measure the porosity and density of solid core samples by saturating the cores with helium through isothermal expansion. drill press is used to cut core samples of variable length and diameter from blocks of geomaterials/building materials. core samples are extracted using diamond mounted motorized drill bits with hand operated lifting mechanism. trim saw with end face grinder is used forprecision cutting and smooth, parallel face preparation of rock samples and concrete using motorized low vibration diamond mounted blades. biosciences & bio engg. metallurgical engg. & materials science the flash differential scanning calorimetry (flash dsc chip nanocalorimetry) revolutionizes rapid scanning dsc. the instrument can analyse reorganization processes that were previously impossible to measure. the flash dsc is way superior to conventional dsc with heating and cooling rates (k/s) that cover a range of more than 7 decades. moreover, to the best of our knowledge this unique instrument is going to be the first of its kind in the country till date. biosciences & bio engg. environmental science & engg. environmental science & engg. prof. subhananda chakrabarti test electronics power, analog, digital cards for the mainframe, upto 8 slots compatible to automated data acquisition and test software prof. subhananda chakrabarti prof. subhananda chakrabarti test dewar, 2stage closed cycle water cooled compressor, with 100 pin chip carrier and filter assembly kit and controller metallurgical engg. & materials science energy science & engg. 154 163 prof. suparna mukherji reactithermm with accessories 155 164 prof. suparna mukherji hplc with diode array detector and fluorescence detector 156 165 prof. soumyo mukherji portable raman spectrometer 157 166 prof. rakesh g. mote mechanical engg. ultra precision machining (upm) system 158 167 prof. asim tiwari mechanical engg. additive subtractive (hybrid) manufacturing system for metals and accessories. 159 168 prof. asim tiwari mechanical engg. electron beam additive machine 160 169 prof. sushil mishra mechanical engg. high frequency fatigue system and accessories. 161 170 prof. anindya datta chemistry transient absorption spectrometer system 162 171 prof. ruchi anand chemistry stopped flow spectrometer 163 172 prof. ruchi anand chemistry multi mode microplate reader 164 173 prof. c. s. yerramalli aerospace engg. wedge type heat sealing machine environmental science & engg. environmental science & engg. biosciences and bioengineering....

Rashtriya Uchchatar Shiksha Abhiyan - Maharashtra

26241680 purchase of laboratory equipments under rusa for arts , commerce and science college , lanja , dist ratnagiri 1 flame photometer 2 double beam spectrophotometer 3 visible spectrophotometer 4 digital ph meter 5 six point ph analyzer 6 autoclave 7 centrifuge 8 microcentrifuge 9 analytical balance 10 precision balance 11 magnetic stirrer 12 magnetic stirrer with heating function 13 pipette pump 14 solvent filtration assembly 15 micropipettes 16 vortex mixer 17 electric sterilizer 18 distillation unit 19 gel viewing system 20 submarine electrophoresis unit 21 vertical electrophoresis unit 22 power pack 23 incubator cum oven 24 ultrasonicator 25 rotary evaporator 26 laminar air flow 27 colorimeter...

Shipping Corporation Of India Limited - Maharashtra

25932891 procurement of spares 1. uv vis spectrophotometer 2. rotary evaporator 3. mini rotary tablet press machine 4. ultrasonic probe sonicator 5. all maze with tracking device & software 6. western blot with power pack ( with transfer unit ) 7. gel documentation system 8. actophotometer 9. gel electrophoresis system 10. micropipette variable vol. ( single channel set ) 11. 20°c vertical deep freeze 12. water distillation unit...