Metal Scrap Trading Corporation Limited - Maharashtra
37766304 auction sale of lot no: mcsc 114 lot name: test sieve, air transient bleed valve, fluid system connector, etc...
37766304 auction sale of lot no: mcsc 114 lot name: test sieve, air transient bleed valve, fluid system connector, etc...
37356939 auction sale of lot no: mcsc 114 lot name: test sieve, reducer, air transient bleed valve, etc...
36218284 supply of essential machinery for establishment of plant leaf and tissue analysis laboratory 1 atomic absorption spectrophotometer ( aas ) : external pc controlled new generation fully automated double beam optics atomic absorption spectrometer fitted with fully automated 8 lamp turret with automatic alignment with strong deuterium background correction for analysis of cu, fe, zn, mn, as, hg, pb, and mo. lamp turret should have independent power supply to each lamp each with two heating circuit for lamp preheating operation. the turret must have comparability for lamps from other aas manufacturers.the system should have both single & double beam optics with optional purge function for improved uv transmission. all optics should be quoted with proactive seal and double sealed with special light proof cover for enhanced stray light rejection and prevention of dust contamination.monochromator: high energy czerny turner monochromatorwavelength range: 185 900 nmgrating: holographic grating with 1800 lines / nmslit selection: automated slit selection with 0.2, 0.5, 0.8 and 1.2nmfocal length: 389 mmdetector: solid state detector siosens, is most sensitive detector and is used in only high endequipment’s like ( icp oes. ) wide range, linear read out 0.1 100%, low noise csa, 5 v background correction: the system should have ultra fast ( 300hz ) d2 background correction with superior s / n ratio and identical absorption profile of d2 and element lamp.flame system: system should highest safety standard with coded burner heads, sensor control of flame, as type and pressure, pressure relief valve in the spray chamber, siphon sensor control & uv sensor for flame detection. automated height adjustment of the burner head, emission mode with baseline correction possibility. gas control: automatic control & optimization ( flow / pressure ) safety measures: gas leak check, prevention of gas release system must have universal all titanium 5 cm burner for both air / acetylene and acetylene / n2o flame.the system should have fully computer controlled total flow gas box with dual fuel and oxidant monitoring for stable control of fuel / oxidant ratio.hg / hydride system. system should be offered with computer controlled dual pump hg / hydride system for the determination of hydrideforming elements in μg / l range with electrically heated cell module ( up to1000oc ) asstandardconfiguration.itshouldalsohave facilityforupgradationwithautomatedburnercleaningand micro volume injection.theaasshouldhaveeasy, reproduciblechangebetween burner head and cell module with quick lock. high specialized aas software package with excellent and exhaustive and cook book should be included. software should have options for automatedoptimization of gas composition andburnerhead position for method development of unknown samples.the aas should be supplied with 2 year warranty against all manufacturing defects. all local scope of supplies like pc & printer, hood, gases, regulators, plumbing and air compressor required for installation and operation of aas to be mentioned and quoted separately. this instrument is supplied with fume hood. 2 double beam spectrophotometer double beam uv vis spectrophotom eter with 10mm 8 ( eight ) place cuvette cell holder with spectral band width : variable 0.5 / 1 / 2 / 4 / 5 nm : highresolutionmonochromator, seya namiokamount wavelength range: 190nm 1100nm spectral bandwidth: variable 0.5 / 1 / 2 / 4 / 5nm cuvette holder:10 mm8 ( eight ) place cuvette cell holder wavelength accuracy: + / 0.1nm@656.1nm, + / 0.3nm@allwavelengthrepeatability: <=0.1nmwavelength accuracy: : 0.2%t ( 0 100%t ) , + / 0.002a ( 0 0.5a ) , + / 0.004a ( 0.5 1a ) wavelength setting: autophotometric repeatability::+ / 0.15%t ( 0 100%t ) , 0.001a ( 0 0.5a ) , 0.002a ( 0.5 1a ) stray light : : <=0.03% t@220nm, 360 nm photometric range: : 0 200%t. 0.3 3a, 0 9999c ( 0 9999f ) straylight:+ / 0.0003a / h@500nm wavelength scan speed: auto response: fast, medium, slow baseline stability: 0.001 a noise level: 0.0005a@500nm work mode: t, a, c, e baseline flatness: 0.0001a detector : imported silicon photodiode display: 10.1” tft colored high quality 3 flame photometer with pc link software and with compressor: • micro controller based automation for ease operation •determination up to four elements with single aspiration ( na, k, li & ca ) • curve fitting correction for non linear emisiion characteristics of elements at higher concentration , maximum five point calibration • storing facility for setups and results ( date wise & batch wise , maximum 700 results ) the same can be recalled whenever need arise . • 4 line 20 character lcd readout • facility for restandardization with single standard • built in real time clock for date and time analysis • printout facility for individual sample , batch sample , total days samples or entire results in the memory ( 700 max ) • air compressor with built in air regulator and air filter • pc link software for transferring data to computer and manipulation of data in computer using rs 232. • reproducibility : : low conc : plus or minus 1% fs , high conc : plus or minus 2% fs. • minimum smaple : 3ml / element ( approx ) • averaging time : 2 to 15 seconds • operating air pressure : 0.45 kg / cm square • air compressor : with built in air regulator and air filter to deliver stable and moisture oil free supply with pressure of 1 kg / cm sqaure. • printer port : epson compatible 80 column dm printer • rs 232 port : pc link data transfer • memory : storage 700 results • power : 230v plus or minus 10% , 50 hz • dimensions : 415 ( w ) x 255 ( d ) x 305 ( h ) mm ( main unit ) , 255 ( w ) x 210 ( d ) x 205 ( h ) mm ( compressor ) • weight : main unit 6.5 kg + compressor 6 kg • this instrument is supplied with pc link software. this instrument is supplied with 4 filters that is na, k, li & ca 4 ph meter 5 point calibration : display capacitive touch screen with resolution 1024*600 ph ? measurement range : ( 2.000 19.999 ) ph ? resolution : 0.01 / 0.001ph ? accuracy : + / 0.01ph ? input current : < 1x10 12 a ? input impedance : > 1x10 ? stability : + / 0.01 ph / 3h ? temperature compensation : ( 0 100 ) c ( auto or manual ) mv ? measurement range ( mv / orp / eh ) : 1999.9mv~0~1999.9mv ? resolution : 0.1mv ? accuracy : + / 0.03%% fs temperature ? range : 10c ~ 110c ? resolution : 0.1c ? accuracy : + / 0.5 c calibration automatic ( 1, 2, 3points ) , niststandards others ? data storage : 300 / 500 sets ? power : dc12v / 1a ? communication interface : usb ( a ) , usb ( b ) , wireless bluetooth module. 5 touch screen analytical balance internal calibration 0.1 mg to 220 gm : maximum : 220 gm , minimum : 0.1 mg, internal calibration , pan size : 90 mm , repeatability : 0.1 mg , linearity : plus or minus 0.2 mg, minimum weight as per usp : 160 mg, response time : 2 to 3 seconds, display : alpha numerical lcd backlite display with a.e.p, unit of measure : gm , mg , ct , gn , mo , oz , dwt, tare range : full capacity , operating range : 10°c to 40°c, protection : user adminstration and password protection , sensitivity drift : plus or minus 1 ppm / °c in temperature + 15 °c to35°c, applicationmode:pcs, %weighing, animal / dynamic weighing , check weighing . automatic density determination, formulation , automatic statistic calculator etc, compliance :iso, glp, gmp, uspcompliance.powersupply : a / c adapter 230v or 115v plus or minus 20% 50 to 60 hz, net weight : 8.0 kg , gross weight : 9.3 kg , packing size : 470 mm lenght x 310 mm width x 500 mm height , packing size :18.5 inch lenght x 12.2 inch width x 19.7 inch height 6 hot air oven 22x22x36 inch 300°c : size dimension : 22 inch x 22 inch x 36 inch • rating watts : 3500 • no of shelves : 4 • hot air ovenare sturdy double walled units. •inner chambers made of stainless steel and outer made of mild steel with powder coating . •gap between the walls fitted with glass wool insulation to avoid heat losses. •heating elements are made of high grade chrome plated nichrome wire. •temperature is controlled by thermostat. •temp range 50°c to 300°c and accuracy plus or minus 2°c ( with digital accuracy plus or minus 1°c ) . •air ventilation is provided on the top of the unit to remove the hot gases / fumes. in lab type oven heater are placed in the bottom side of the unit . •all the control switches and pilotlamps are fitted on the frontpanel.•trays shouldbe supplied with gi wire mesh with digital temperature indicator cum controller and with digital timer . this oven is memmert type. 7 kjedhal block digester along with cooling station and fume scrubber and distillation unit : this instrument consist of 3 part = ( a ) kjeldahl block digester with cooling station + ( b ) fume scrubber and ( c ) automatic kjeldahl distillation unit , and the specification of this 3 parts are mentioned as follows : ( a ) kjeldahl block digester with cooling station : • fast , safe and complete digestion of samples through aluminiumblocks•intricatelycontroldigestiontemperature curves for unsupervised digestion. • monitor process parameters & pre set samples cycles. • autolift enables complete automation and safety. • cooling stations increase throughput by decreasing the cooling time past digestion. •number of positions : 250 ml x 12 nos • tube capacity ( ml ) : 250 ml •temperature range : ambient to 470°c • timer range : 1 to 300 minutes • temperature precision : + or 1°c • ramp and hold : upto 4 •presets : upto 50 • auto scrubber on / off : yes •pid control : yes • autolift : yes • auto off after achieving set time : yes • temperature calibration : yes , single and two point • pc & printer connectivity : yes upgradable • display : graphical lcd • body : stainless steel with control paneloffrp•currentconsumption:8a•dimension: 416x554x595mm • power consumption : 1600w • cooling station : increase sample throughput by saving time on sample cooling • save time on complete kjeldhal process as cooling station offers rapidsample cooking. ( b ) fume scrubber: • transparentpc protective front shield and easy removable bottle tray. • carbon adsorption bottle removal any trace acid from exhaust air. • fume scrubber with 28lpm capacity for complete evacuation of acid fumes. • ptfe air baffle for acid neutralisation• 2 litre condensation and neutralisation jars for larger fume volumes. • polypropylene head / nozzle, valve in teflon & diaphragm in tefloncoatedneoprenerubber•threadedtubeconnectorsfor quick removal of glass components for maintenance • fume condenser attachment for pre condensation of excess acid, hence saving neutralisation chemicals. • current consumption ( a ) :1a • capacity :28ltr / min•dimension ( wxdxh ) inmm : 365x375x480mm ( c ) automatic kjeldahl distillation unit : • simple programming and stright forward operation • quick start option with favourite method menu • start and stop cooling water automaticallly during the distillation process with excellent insulationofinternalparts•robustacidresistanthousing• compact footprint saves useful laboratory bench space • brilliant supervision of all crucial functions • comprehensive built in safety systems for operator protection •sample analysis reuires no monitoring • the inbuilt n / protein calculator with extraction of results makes the system versatile like never before • automatic dilution , steam , alkali , acid and test tube drain • anti corrosive frp body construction • 7 colored touch screen display • steam regulation ( 10 to 100% ) • process kill switch to hall the process in caseofaccidential•processresumefromstop•detachable bottom drip tray for extra protection against acid attack • anytime alkali addition during the distillation cycle • tube sensor that enablessafeoperatingconditionsineventoftubedamage• reagent refill level sensor to avert reagent dry out • one pointcalibrationofalkalianddistilledwaterpumps•twopoint calibrationforacidpumps•realtimemonitoringofprocess parameters • selv protection • nitrogen reproducibility : + or 1% • rsd < 1% • lod of 1 to 200 mg with greater then or equalto0.1mgof nitrogen •nitrogen recovery greater then 99.5% •tube capacity ( ml ) : 250 ml , minimum distillation time ( mins ) : 5 , current consumption ( a ) : 10 , power consumption ( w ) : 1500, dimension : lenght 480 mm x breadth 470 mm x 820 mm 8 all quartz doubledistillation unit 2.5 ltr / hr with distillationapparatus powersupply: • unit consisit of primary boiler with built in heater. primary boiler has ‘o’ ring groove at the top on which a silicone ‘o’ ring sits. the primary boiler is being provided with ‘o’ ring which acts as cushion on which secondary boiler and condenser unit is mounted. • the secondry boiler with condenser is mounted on the primary boiler. • the cooling water inlet and outlet are both at the top for easy maintenance • a double wall condenser ensuresseparate condensation of vapor coming from the two boilers using single cooling circuit. • an additional cooling column provides larger cooling surface area for primary boiler avoiding uncondensed steam escaping at the top. • daps ( auto cut off system ) has a reset button and a buzzer. • we provide 10 mtrs of 10mm id x 14mm silicon tubing 10 meters with each unit • the bottom outlet is connected to a ‘t’ joint of which limb is connected by rubber tubing & pinch cock for cleaning sediments in primary boiler by acid wash and other limb to the water. •dimension : lenght : 35 cm , breadth : 35 cm and height : 100 cm • distillation water output capacity : 2.5 ltr / hr . • total powerconsumed ( kw ) : 4.4 • condutivity ( s / cm ) : 9 automatic titration unit: volume dosing: 0.001 to 999.999 ml ? volume resolution: 0.001ml to 1μl ? auto fill and dose during titration process ? rsd of 1% or less ? dosing resolution is1 μl ( 0.001 ml ) in20, 000 μl or 1 / 20, 000 resolution ? special feature of “burette calibration and correction” of dosed volume. 10 plant sample grinder / mixture: • recommended for grinding of samples • polished ( cast mild steel ) chamber with two stationery blades and rotor with four cutting edges • the rotor revolves at high speed to produce a shearing action which minimize losses • samples introduced through hopper are agitated until cut to sufficient fineness to fall through the sieve delivery tube which forms the bottom of the chamber • three sieves 80 mesh 1 mm and 2 mm are available.• removable glass plate forms the face of the chamber and permits observation during operations. • removal gives access to the interior for cleaning • a three step v belt drive permits three rotor seeds by changing the pulley position of belt • complete with hopper wooden plunger three sieves of 80 mesh 1 mm & 2 mm • wrench for adjusting blades , brush with 1 / 4 1h.p continuous duty motor with v belt drive, switch, 3 core wire , suitable for operation on 230v , single phase, 50 hz ac supply • chamber size :40x25mm • motor capacity : 0.25hp 11 magnetic stirrer along with heater : ? mixes volumes up to 1.5l? adjustable speed control from 100 to 1500 rpm? plate dimensions: 8.5 x 8.5 cm? external dimensions l x w x h : 120 x 120 x 30 mm? weight : 0.2 kg? withstands temperature up to: 45 °c? power : 2 w / 240 v / 50 60 hz 12 mechanical shaker : ? intermittent & continuous shifting motion? 20×4 alphanumeric lcd with backlit display? 2 tier password protection? fully alphanumeric keyboard ? very low noise operation? up to 8 sieves ( test sieve dia 200mm x 50mm h ) 13 centrifuge : max speed rpm 4400max. rcf ‘g’ 2350max. capacity ml 200w x d x h mm 330 x 370 x 295supply: 220 240 volts 50 hz. single phase 14 refrigerated centrifuge: max. speed 22, 000 rpm max. rcf 55, 200 xg ( r22a4 ) max. capacity 1, 500ml x 4 bottles ( r9a2 ) speed control range 300 ~22, 000 rpm temperature control range acl / dcl mode acl: 9 modes, dcl: 9 modes with coasting program function 30 programs, with rcf ( g ) / g x sec function drive unit induction motor ( inverter ) refrigerator closed inverter rotary ( refrigerant : r410a ) 15 fluorescence microscope with image analyzer: standstable&sturdy, corrosionresistant.anti fungalmould treated, singlemold modular stand viewbody 300 inclined siedentopf binocular / trinocular tubes, 3600 rotatable with ipd 53 75 mm and dioptric adjustment eyepiece wf 10x / 22mmwith eye guards. anti fungal mould treated nosepiece quadruple reverse angle nosepiece stage double layer mechanical stage 210mm x 140mm, range of motion 75mm x 50mm. integrated mechanical stage with vernier, low positioncoaxialcontrol knobs condenser n.a. 1.25 abbe condenser with iris diaphragm, rack and pinion focusing illumination / reflectedfluorescence system3whighbrightnesswhiteled, brightnessadjustable 3w blue led ( 460 / 470nm ) , with blue fluorescentfilter system. brightness not adjustable power input110 240v 50 / 60hz accessoriesorange color plastic screen for protection against uv light, powercode, spare fuses, immersion oil 16 beaker: 1. 1000 ml 24, 2. 500 ml 24, 3. 250 ml 24, 4. 100 ml 24 17 volumetric flask : 1.1000 ml 24, 2. 500 ml 24, 3. 250 ml 24, 4. 100 ml 24, 5. 50 ml 24, 6. 25 ml 24 conical flask : 1.250 ml 24, 2.150ml 24, glass rod: 24 18 boron ( quarts glass wears ) volumatic flask: 1.125 ml 24, 2.250 ml 24 19 burrete ( 24 ) , micro pippate electronic ( 10 ) , manual auto pippate ( 10 ) , measurening cylinder ( 24 ) etc. 20 nitrogen : 1. boric acid, 2. sodium hydroxide, 3. h2 so4, 4. methyl red indicator, 5. salicylic acid, 6. sodium thiosulphate, 7. copper sulphate, 8. selenium powder, 9. bromocresol green, 10. potassium sulphate ( k2so4 ) 21 phosphorus : 1. ammonium molybdate, 2. ammonium vanadate, 3. potassium orthophosphate ( kh2p04 ) potassium : 1. potassium chloride. 22 ph : buffer solution a. ph 4.00 b. ph 7.00 c. ph 10.00 692 ppm nacl 23 microcontinent : 1. standards for calibration fe, cu, zn, mn 24 sulphur : 1. barium chloride, 2. gum acedia, 3. magnesium chloride ( mgcl26h20 ) 4. potassium sulphate k2so4, 5. potassium nitrate, 6. ethanol 7. hydrochloric acid 25 boron : 1. ethenone diamine tetra acetic acid ( disodium salt ) , 2. ascorbic acid 3. azomethine h, 4. acetic acid glacial, 5. calcium oxidate, 6. boric acid ( h3b03 ) , 7. ethyl alcohol 26 digestion : 1. nitic acid ( kn03 ) , 2. perchloric acid ( helo4 ) , 3. hydrogen peroxide, 4. hydrochloric acid ( hcl ) 27 air conditioner ( 1 to 1.5 ton ) : •splitacwithinvertorcompressor•capacitywith1.5ton suitable formedium size room 125 to150 sqft• air direction control auto with brush filter and auto clean • rating 5 star with isi mark 28 computer with monitor, mouse and keyboard and software ( auth. by nic ) printer : • i5 • 8 gb • 1 tb hdd • integrated uhd 730 graphics • wifi 6•bluetooth 5.2 • mineral grey • 18.5 monitor •mouse •keyboard • no software included with this computer ( software like windows 11 not included with this computer , only hardware will be supplied ) • all in onemonochrome printer maximum copy width: 210 mm stack copy: up to 99 pages, or 1 sided print: up to 34 pages / min ( a4 size ) & up to 36 pages / min ( letter size ) for 2 sided print: up to 16 pages / min ( up to 8 sheets / min ) ( a4 size ) & up to 17 pages / min ( up to 8.5 sheets / min ) ( letter size ) print, scan & copy required 29 chair, stool, trey, cupboard : 8 chairs, 10 stools, 10 trey, 02 cupboard, 06 tables ( 2*8ft ) 30 laboratory refrigerator : net capacity ( litres ) 400 l 31 cctv : • 4 ch e series dvr 1 quantity • 2.4 mp dome 1 quantity • 2.4 mp bullet 1 quantity • 1 tb toshiba hdd avdv 1 quantity • power supply 1 quantity • 3+1 cctv cable ( 1 box 90 meters ) • bnc dc pins...
35845025 bids are invited for procurement of test sieves 1 dish enamel tray large 2 sieve gi plain 25x3mm 3 dish enamel tray medium 4 dish enamel tray small 5 test sieveg.i18inch 6 test sieve brass 12.5mm 7 test sieve brass 8inch 2.8mm 8 latex seamless gas sampling bladder 9 misc scoop ss 2kg 10 test sieve brass 4.75mm 11 spatula small 12 spatula large 13 tong small 14 test sieve brass 75 micron 15 test sieve brass 150 micron 16 test sieve brass 212 micron 17 test sieve brass 8inch 250micron 18 test sieve brass 300 micron 19 test sieve brass 8inch 600micron 20 test sieve brass 8inch 1mm 21 test sieve brass 8inch 1.18mm 22 test sieve brass d 8inch hole 2mm 23 test sieve brass 3.35mm 24 test sieve brass 2.36mm total quantity : 710...
35781410 bids are invited for calibration mse calibration for bod incubator , calibration for hot air oven , calibration for vacuum oven , calibration for water bath , calibration for weighing balance , calibration for volumetric pipette , calibration for volumetric flask , calibration for vacuum gauge , calibration for test sieves , calibration for autoclave , calibration for pressure gauge , calibration for ph meter , calibration for muffle furnance , cali for measuring cylinder , laminar air flow , calibration for laboratory incubator , calibration for incubator , calibration for hot plate , calibration for glass thermometer , calibration for electronic balance , calibration for centrifuge , calibration for bursting strength tester , calibration for burette , calibration for box compression tester , calibration for bacteriological incubator , calibration for specific gravity bottle , site charges total quantity : 65...
35487700 bids are invited for geo technical instruments mse specific gravity , protodyaknov strength index machine , hydrometer analysis apparatus , liquid limit, plastic limit, shrinkage limit , pycnometer set 2 , swell test apparatus , free swell index apparatus , consolidation test apparatus , standard proctor compaction test , sieve analysis set 2 total quantity : 10...
33964068 bids are invited for test sieves as per is 460 part 1 and total quantity : 9...
32572109 supply of lab equipments , digital thermo hygrometer , lab acc thermometer 0 300 deg.c. , thermometers, range 100 to 100 deg. cen , latex tube, size id 8mm, od 12 mm. , gas tight syring1 ml. , ss test sieve ( 12.5mm ) , ss test sieve ( 6.3 mm ) , ss test sieve ( 2.80 mm ) , ss test sieve ( 1.19 mm ) , ss test sieve ( 1.00 mm ) , ss test sieve ( 0.710 mm ) , ss test sieve ( 0.50 mm ) , column for chemito gc8610 , ss test sieve ( 0.30 mm ) , ph electrode thermo , ss test sieve ( 20 mm ) , gall rect cuvettes 10mm => limited...
32321632 supply of vibratory sieve shaker along with compatible test sieves , vibratory sieve shaker along with compatible test sieves, collecting pans and lids according to the specification attached...
31726330 bids are invited for geo technical instruments specific gravity protodyaknov strength index machine, hydrometer analysis apparatus, liquid limit, plastic limit, shrinkage limit , pycnometer ( set 2 ) , swell test apparatus , free swell index apparatus, consolidation test apparatus, standard proctor compaction test, sieve analysis ( set 2 ) ....
30810953 supply, installation and commissioning of testing equipments supply, installation and commissioning of testing equipments , supply, installation & commissioning of testing equipments (total cost in cif premises at gholwad bordi chikoo foundation, survey no. 122/4, brahmangaon, post bordi, tal. talasari, dist –palghar, state maharashtra, india, including gst, all applicable taxes, clearing, transportation, insurance, unloading, installation & commissioning, agency commission, packing, forwarding,on site technological training, training for mechanical and electrical maintenance for 4 persons for 2 weeks, internal electrical cable (main control panel to individual machine) , microprocessor based precision ph / orp / temperature meter , waterproof pen type ph tester , hot air oven , concentric rings water baths , muffle furnace , analytical balance , electronic balance , ma 50 r wh moisture analyzer , digital refractometer , magnetic stirrer , hot plate , penetrometer , auto titrator , desiccator (vacuum) , digital vernier caliper , test sieves , equitron water still , heating mantle and magnetic stirring , chemicals, consumables & plastic lab ware...
30484359 bids are invited for test sieves, lids and collecting pan (q3) () total quantity : 1...
30185394 onsite calibration of coal lab equipment for nabl accreditation onsite calibration of coal lab equipment for nabl accreditation onsite calibration of coal lab equipment , lab instt ( muffle furnace ) calibration , lab instt ( oven ) calibration , lab instt ( humidity cabinet ) calibration , lab instt ( balance ) calibration , lab instt weight box calibration , lab instt thermohygrometer calibration , lab instt test sieve calibration , lab instt ( master pr.g / g ) calibration , lab instt ( digital timer ) calibration , travelling & incidentals.tentative visit , calibration of weighing balance ( 10kg ) , calibration of weighing balance ( 10 20kg , calibration of weighing balance ( 30kg ) , calibration of weighing balance ( 100kg ) , calibration of digital hygrometer , calibration of glass burettes ( 50ml ) , calibration of thermometers , calibration of hydometers => limited...
29876898 supply of assaying lab equipments for godowns at various agricultural produce market committees ( apmc ) in the state of maharashtra. supply of assaying lab equipments for godowns at various agricultural produce market committees ( apmc ) in the state of maharashtra. , seed / grain divider seed / grain divider ( boerner type ) this divider is made to meet f.ci. and b.i.s. requirements. material flowing components are made by special process to give smooth finish and made without welding or joint. it is used to reduce the size of a grain / seed sample into two halves, each exactly representative of the original sample. to operate this device, a sample of grain is poured in the hopper and then released down the cone which is directly under the center of the opening. around the base of the cone are 38 openings or pockets. the grain falling down the sides of the cone is cut into 38 separate streams, rejoining into two streams, which empty into the pans. the divider is calibrated to provide accuracy of 1 % between pans on a 1000g sample. the body and inner parts are made of brass eliminating the possibility of rust. the legs and supports are made of powder coated steel. salient features: smooth finish, all circular / conical parts are made on spinning, made without joint ( material flowing component ) . cup made in single piece from die increases accuracy of the boerner divider. 38 opening or pockets., meeting bis specifications, sample up to 1000gm., no electrical requirement & easy operation. specification size : 86cm height x 38cm dia ( approx. ) no. of pockets : 38 weight : 8 kg ( approx. ) without pan no. of pans : 02 , parkhi 9 supply of parkhi made of brass with chromium finishing, size : 9 , parkhi 12 supply of parkhi made of brass with chromium finishing, size : 12 , enameled plate supply of enameled plate flat type fully coated raised rims specifications : dia : 30cm weight: 575 ±25gm , seed sampling trier 75 cm supply of seed sampling trier 75 cm, material of construction : brass, smooth finish double tube length: 75cm, outside dia. : 1.25 cm, 5 openings cross knurling on handle for better gripping. opening and closing position should be fool proof so no chance of grains spillage. , seed sampling trier 90 cm supply of seed sampling trier 90 cm material of construction: aluminium smooth finish double tube length: 90cm, outside dia. : 2.5 cm, 5 openings cross knurling on handle for better gripping. opening and closing position should be fool proof so no chance of grains spillage. , weighing scale ( table top ) supply and installation of weighing scale ( table top ) of bright led display, microprocessor controlled compact, portable, germany made high precision strain gauges load cell, high resolution, rugged and robust construction, die cast housing ( overall size 180×310×55mm ) , built in tare facility, kg, lb & oz units, matt finish stainless steel pan, parts counting and percentage function, calibration facility, membrane keyboard, data output rs232 port., overload protection., provided with a.c. adaptor. the readings should not change due to environmental changes, all scales should be as per bis standard is 9281 part 3 certified with approval. electronic circuit pcb should have 4 channel 24 bits adc for stable & correct weight. pcb should be tested by rrsl and nabl 17025 lab, built in rechargeable battery, foldable draft shield interior to avoid wind disturbances, bubble water indication for uniform surface level, remote display. specification: maximum capacity: 300g, readability: 0.01 g pan size: 118 mm dia. display: led body: rugged & reliable abs housing design pan: stainless steel computer interface: in built rs 232 interface , seed hand test sieves supply of set of sieves ( round brass ) to experiment with various separations and select the correct sieves for each cleaning problem. sieves are made of zinc plated ms. frame of sieves are made of brass. dia 8”×2” ( approx. ) : set of four sieves with top lid & bottom pan dia 12”x3” ( approx ) : set of four sieves with top lid & bottom pan , rice broken separator supply of rice broken separator . sets comprising : 3.5mm, 3.97 mm, 4.6mm, 4.8 mm size : 16 cm x 10 cm x 1 cm , illuminated purity work board supply of illuminated purity work board designed for testing physical purity of seed samples with maximum comfort and efficiency. also used to distinguish discoloured damaged and chalky grains / seeds. light below the rectangular 11 x 6 opal glass makes a handy diaphanoscope. use of this spot with chaffy grass eliminates all guess works on tests. one convenient drawer in the front for larger seed lots. it should be fitted with a magnifying glass covering the entire surface of opal glass and positioning of viewing glass is user friendly. specification: size : 50 cm x 28 cm x 10 cm ( made up of teak. ) drawer capacity : 930 cc ( approx. ) supply : 220 v ac , sample scoop supply of sample scoop set. sample scoop set made up of mild steel. size of scoop should be 105mm x 100mm x 25mm ( 1 no. ) , 75mm x 65mm x 25mm ( 1 no. ) , 25mm x 20mm x 25mm ( 2 nos. ) , de husked grain testing kit supply of de husked grain testing kit consist of branded chemicals as follows : metanil yellow : 25gm methyle blue: 25gm hcl: 100ml reagent bottle 500ml : 03 nos measuring cylinder glass 50cc, 20cc, 10cc : one each glass flask 1 ltr. : 01 no. petri dish 4” dia. :04 nos. forcep : 01 no. pipette 10ml.: 01 no. magnifier 4” :01no. , magnifying glass supply of magnifying glass handle: 7.5 cm length ( approx. ) dia. of magnifying glass: 4 inch ( approx. ) magnification : 2.5x , palm dehuskar with broken separator supply of palm dehuskar with broken separator made of special quality abs and rubber. it should consist of one upper part and one lower part, both parts are fitted with grooved rubber. useful for manual dehusking of small sample of paddy for quality estimation. the broken separator should be supplied with three plastic screen having 1.6 mm, 3.2 mm and 4.8 mm indent to separate brokens from head rice. , petri dish supply of petri dish. petri dish made of plastic, size : 6”approx...
29389038 bids are invited for ro tap sieve shaker( insmart brand only) supply of ro tap sieve shaker( insmart brand only) alongwith test sieve ( 1mm to 212 micron and top cover & bottom pan total quantity : 1...
27819239 supply of assaying lab equipments for godowns at various agricultural produce market committees ( apmc ) in the state of maharashtra. , seed / grain divider seed / grain divider ( boerner type ) this divider is made to meet f.ci. and b.i.s. requirements. material flowing components are made by special process to give smooth finish and made without welding or joint. it is used to reduce the size of a grain / seed sample into two halves, each exactly representative of the original sample. to operate this device, a sample of grain is poured in the hopper and then released down the cone which is directly under the center of the opening. around the base of the cone are 38 openings or pockets. the grain falling down the sides of the cone is cut into 38 separate streams, rejoining into two streams, which empty into the pans. the divider is calibrated to provide accuracy of 1 % between pans on a 1000g sample. the body and inner parts are made of brass eliminating the possibility of rust. the legs and supports are made of powder coated steel. salient features: smooth finish, all circular / conical parts are made on spinning, made without joint ( material flowing component ) . cup made in single piece from die increases accuracy of the boerner divider. 38 opening or pockets., meeting bis specifications, sample up to 1000gm., no electrical requirement & easy operation. specification size : 86cm height x 38cm dia ( approx. ) no. of pockets : 38 weight : 8 kg ( approx. ) without pan no. of pans : 02 , parkhi 9 supply of parkhi made of brass with chromium finishing, size : 9 , parkhi 12 supply of parkhi made of brass with chromium finishing, size : 12 , enameled plate supply of enameled plate flat type fully coated raised rims specifications : dia : 30cm weight: 575 ±25gm , seed sampling trier 75 cm supply of seed sampling trier 75 cm, material of construction : brass, smooth finish double tube length: 75cm, outside dia. : 1.25 cm, 5 openings , seed sampling trier 90 cm supply of seed sampling trier 90 cm material of construction: aluminium smooth finish double tube length: 90cm, outside dia. : 2.5 cm, 5 openings , weighing scale ( table top ) supply and installation of weighing scale ( table top ) of bright lcd display, microprocessor controlled compact, portable, precision load cell., high resolution. rugged and robust construction., die cast housing ( overall size 180x310x55mm ) , built in tare facility., kg, lb & oz units, matt finish stainless steel pan, parts counting and percentage function, calibration facility, membrane keyboard, data output rs232 port., overload protection., provided with a.c. adaptor. specification: maximum capacity: 300g, readability: 0.01 g pan size: 125 mm dia, display: lcd base plate : crca, 2.5 mm ( 12 swg ) zinc yellow plated body : aluminium pressure die cast body pan : 19 swg stainless steel support plate of pan: aluminium sheet, 4 mm ( 8 swg ) computer interface: in built rs 232 interface , seed hand test sieves supply of set of sieves ( round brass ) to experiment with various separations and select the correct sieves for each cleaning problem. sieves are made of zinc plated ms. frame of sieves are made of brass. dia 8”×2” ( approx. ) : set of four sieves with top lid & bottom pan dia 12”x3” ( approx ) : set of four sieves with top lid & bottom pan , rice broken separator supply of rice broken separator . sets comprising : 3.5mm, 3.97 mm, 4.6mm, 4.8 mm size : 16 cm x 10 cm x 1 cm , illuminated purity work board supply of illuminated purity work board designed for testing physical purity of seed samples with maximum comfort and efficiency. also used to distinguish discoloured damaged and chalky grains / seeds. light below the rectangular 11 x 6 opal glass makes a handy diaphanoscope. use of this spot with chaffy grass eliminates all guess works on tests. one convenient drawer in the front for larger seed lots. it should be fitted with a magnifying glass covering the entire surface of opal glass. specification: size : 50 cm x 28 cm x 10 cm ( made up of teak. ) drawer capacity : 930 cc ( approx. ) supply : 220 v ac , sample scoop supply of sample scoop set. sample scoop set made up of mild steel. size of scoop should be 105mm x 100mm x 25mm ( 1 no. ) , 75mm x 65mm x 25mm ( 1 no. ) , 25mm x 20mm x 25mm ( 2 nos. ) , de husked grain testing kit supply of de husked grain testing kit consist of metanil yellow : 25gm methyle blue: 25gm hcl: 100ml reagent bottle 500ml : 03 nos measuring cylinder glass 50cc, 20cc, 10cc : one each glass flask 1 ltr. : 01 no. petri dish 4” dia. :04 nos. forcep : 01 no. pipette 10ml.: 01 no. magnifier 4” :01no. , magnifying glass supply of magnifying glass handle: 7.5 cm length ( approx. ) dia. of magnifying glass: 4 inch ( approx. ) magnification : 2.5x , palm dehuskar with broken separator supply of palm dehuskar with broken separator made of special quality abs and rubber. it should consist of one upper part and one lower part, both parts are fitted with grooved rubber. useful for manual dehusking of small sample of paddy for quality estimation. the broken separator should be supplied with three plastic screen having 1.6 mm, 3.2 mm and 4.8 mm indent to separate brokens from head rice. , petri dish supply of petri dish. petri dish made of plastic, size : 6”approx...
26534529 calibration of laboratory equipments at coal testing laboratory, kamptee sub area as per list & calibration points given below. 1 incubator / meghna 2 moisture oven / tempo 3 muffle furnace no. 2 / biotech 4 muffle furnace no. 1 5 k type thermocouple / htc 6 digital weighing balance / contech 7 weight box / mlabs 8 pipette / borosilicate glass 9 burette / borosilicate glass 10 glass thermometer / jennson 11 hydrometer / zaktag 12 dial hygrometer / mextech 13 dial pressure gauge / fgb 14 test sieve / scientific corporation...
25732069 bids are invited for test sieves total quantity : 1...
25421555 bids are invited for test sieves total quantity : 1...
23738723 tender for calibration of laboratory equipments at coal testing laboratory , kamptee sub area . as per schedule 1 incubator / meghna , 2 moisture oven / tempo 3 muffle furnace no. 2 / biotech 4 k type thermocouple htc 5 digital weighing balance / contech 6 weight box / mlabs 7 pipette / borosili cate glass 8 burette / borosili cate glass 9 glass thermometer / j ennson 10 hydrometer / za ktag 11 dial hygrometer / m extech 12 dial pressure gauge / fgb 13 test sieve / scientific corporation...
23666731 auction sale of lot no: 7 lot name: calculator , test sieve brass, stock and dies with tong...
23085373 sell of old unserviceable miscellaneous lab instruments, office furniture and scrap material ( lot no. 2 ) bucket , pic , pipe rinch , stove , stray scaler , pintcher , number punch system , garden scissor , letter punch machine , bench , tog , tray g i , tripad stand , kerosene tin , field density kit , loading jack , moisture meter , tube , auger post hold , air line filter , spiral , rammer , stapler , compaction test operators neeld exstructure , magnetic base , chain tog , mold for rd , mud boiler, extructeror fame , diapad water parts , sping balance , vacuum pump , parmayambelti mold , oven , coir cutter , telephone lock , hydraulic jack , boer machine , bearing puller , camera , chain pulley block , carpenter chijhal , drum , drill machine , emergency tube light , gi bucket, tray , gum boot shoe , hammer , hexa frame , hot taplet , knife , letter punch , ms plate , name puller , number punch machine , pad lock , pipe , pipe , pakkad , olvabaa, gunya , screw driver , scissor , spikes , spachulya , thermos , tringular tripad , two pen , l n kiklar , ms plate , masonary drill bit, stove peef , water bag , v i p breefcase , torch , water bath , aluminum bucket , wire rope , mechanical slib shaker, unconfied copction test operatos , balance , vacuum pump , extructer universal , field density kit , m s bolt , post hold type auger , procter rammer , m s rod and m s plate , d s machine , reaction plate , dial guages testing operators , flaming strips , u shape m s strips , lifting handle , scrapper m s strips , cliping rod for permobility , dial guage strips , break baggers , fludger proving ring, spling pressure strips , hanger for tri cell test , shoil testing equipment , saturation device , stapler cutter , flops for casing pipe , magnetic hallow cylinder , screw jack , mechinal copction , large tray diversion , stool , showcase , chair , table , ceiling fan , polythene cane , proving ring , enameled tray , 177 clay plug equipment 178 compaction test kit 179 compaction test apparatus 180 dial guage 0.01 mm l.c. 181 dial guage 0.002 mm l.c. 182 dial guage 5 cm traval 0.01 accuracy indian 183 dial guage 2.5 cm traval i.e. 25 mm 0.01 accuracy 184 earth pressure cells 185 field density kit 186 galvano meter 187 guide plate kit 188 high speed stirrer 189 hydraulic jack 10 ton capacity 190 hydraulic jack 20 ton capacity 191 hydraulic jack 50 ton capacity 192 jack screw type 193 jack seat plate 194 laboratory stirrer 195 liquid limit device 196 liquid limit device 197 mechanical shaker 198 morter & pestal 199 pizometer assesaries 200 pistor & sand sampler 201 pressure cell 202 proving ring 7 kg 203 proving ring 12 kg 204 proving ring 50 lbs 205 proving ring 100 lbs 206 proving ring 200 lbs 207 proving ring 300 lbs 208 proving ring 400 lbs 209 proving ring 2000 lbs 1000 kg 210 proving ring 1500 lbs 211 proving ring 5 ton 212 proving ring 15 ton 213 proving ring 20 ton 214 rammer 45 kg 215 sampler ( 1 1 / 2 ) 3.814.76 cm dia, 60.96 cm dai 216 sampler 5.08 cm dia 217 sampler 4 diz 5.5. 218 sampler ( 4 dia 12 10.16 cm dia 30.48 cm 219 sampler ( 4 dia 1510.16 cm dia 38.10 cm ) 220 sampler ( 4 dia 1810.16 cm dia 045.72 cm 221 sampler 5.5 10.16 cm dia 91.44 cm long 222 shrinkage limit kit 223 shrinkage limit kit 224 soil sampler kit 225 strain meter indicator with switching balancing unit 226 swell test apparatus 227 sampling tube 3.8 cm dia 228 settlement gauges 229 triaxial cell 21.1 kg / cm 2 230 triaxial cell 38 mm dia 231 triaxial cell 232 triaxial cell precision 233 triaxial cell 234 triaxial cell heico 235 triaxial cell 236 acker vane shear kit 237 dry and wet thermameter 238 enamelled bawls 12 239 klinger valve ab 10 240 maximum & minium thermameter 241 petri dishes 242 stone bottle for mercury 243 tray g i 18x8x3 244 enamelled trays 15x12x2 245 enamelled trays 12x10x2 246 enamelled trays 10x8x2 247 enamelled trays 8x6x2 248 trays wooden 11 x 9 x 3 249 tray g i 18x15x3 250 tray g i 17x17x3 251 perspex model 252 donfoss valve 253 cissor type tong 54 cm long 254 soldering iron 255 planks ( wooden ) for cutter 12 x 12 256 stop watch 257 lead sheets 258 g i pipe 3 & coupling 12 259 dial vernier caliper 260 micrometer screw gauge 261 m s plate 450 x 450 x 6 mm 262 perspex models 263 wolf drilling machine. 264 crow bars 2 long 265 lock g.i. big ( 2.5 ) 266 phawads 267 godrej navatal lock 50 mm size 268 file 10 long for wood 269 lock giodrej 40 mm navtal 5 livers 270 spanner double ended 271 screw driver 272 file flat 300 mm long iind cut 273 sujal water filter 1 alluminium pan with handle 9 dia. 2 carpet 3 crow bar 4 carpenter hand saw 5 carpenter vice 6 carpenter chisel 1 / 4 7 carpenter chisel 3 / 8 8 carpenter chisel 3 / 4 9 dunfoss cock 10 electric motor 1 / 4 hp 11 enamelled bowl 9 dia. 12 enamelled bowl 12 dia. 13 enamelled bowl 17 dia. 14 enamelled bowl 3 dia. 15 enamelled funnel 4 dia. 16 enamelled funnel 4 dia. 17 enamelled jug 5 dia. 18 enamelled tray 8*6*2 19 enamelled tray 12*10*2 20 enamelled tray 15*12*2 21 file half round 8 22 foot pump ( maruti make ) 23 gurder ( i section beam ) 7*31 / 2*15 24 gurder ( i section beam ) 7*31 / 2*7 25 i section beam 15* 2 160mm*85mm 26 i section beam 14* 3 160mm*85mm 27 iron pully block 28 letter punch a to z 29 l spanner allen key 30 meter rule ( wooden ) 31 manila rope 32 multimeter ( elco ) 33 miliammeter 34 m.s. plate 28*101 / 2*1 / 2 35 nose plier 200mm 36 petromax ( gemini ) 37 pick axe 38 godrej navatal lock 39 pipe wrench 14 40 platform balance 100kg avennu brand 41 planner wooden 42 pully arrangement 43 screw driver 12 44 adjustable spanner 12 45 spanner double ended 24 / 7 46 stainless steel foot rule 47 spring balance 10 kg 48 steel strip 10*1*1 / 49 stop clock 50 stop watches 51 stove prabhat 52 survey umbrella 53 tripod pully arrangement 54 tube cutter 55 twizzer 56 vernier calliper 1 / 1000 & 1 / 50mm 57 valve dia 58 water cooler 59 water filter 60 cutter 16 cm long 61 brass lock 65mm 7 lever 62 time piece 63 t.w.round block 4 dia*8 length 64 table lamp 65 sujal water filter 30 lit. 66 godrej navatal lock 67 can 5 lit. 68 jeep trailor 69 air pressure regulator 70 andersons pippet stand 71 ball bearing guide for 4 i.d. 72 ball bearing guide for 6 i.d. 73 crucible tongs 6 i.d. 74 crucible tongs 8 i.d. 75 crucible tongs 12 i.d. 76 consolidation cutter 77 cone penetrometer 78 calibration device 79 cutter for direct shear test 150*150mm 80 cutter for direct shear test 200*200mm 81 cutter for large box 82 cathod ray oscilloscope 83 direct shear box 84 direct shear cutter 6*6 cm 85 dial gauge ( baty ) 86 dial gauge ( metatoyo ) 87 dial gauge ( baty make ) 88 dial gauge ( english ) 89 dial gauge ( baty make ) 90 extractor frame 91 electric probe 92 electric water probe 93 funnel stand 94 filtration tank ( m.s. ) 95 half round pipe 96 high speed stirrer 97 jack seat block ( m.s. ) 98 lateral pressure assembly 99 lateral strain indicator 100 load cell 101 load meter 102 linear variable differential transducer ( lvdt ) 103 magnetic base 104 metelar analytical balance 105 magnetic tape for computer 106 proving ring 200 lbs 107 proving ring 500 lbs 108 proving ring 50 lbs 109 pressure gauge 0 to 50 psi 110 pressure gauge 0 to 100 psi 111 pressure gauge 0 to 150 psi 112 pressure gauge 0 to 200 psi 113 pressure gauge 1 to 2.5 kg / cm2 114 pressure gauge 1 to 3 kg / cm2 115 pressure gauge 0 to 6 kg / cm2 116 pressur gauge 0 to 10.6 kg / cm2 117 pressure gauge 0 to 16 kg / cm2 118 pressure gauge 0 to 25 kg / cm2 119 pressure gauge 1 to 6 kg / cm2 120 pressure gauge 0 to 10 kg / cm2 121 power supply unit 122 pizometer pump 123 permeability mould 4 dia. 124 permeability mould 6 dia. 125 permeability mould 8 dia. 126 proctor rammer 5.5 lbs 127 pearmeability tank 128 pippet stand 129 plastic limit kit 130 room heater 131 recorder ( adept make ) 132 six point recorder 133 strain measurement strip 134 screw jack 10 tonn cap. 135 screw jack 05 tonn cap. 136 sampler head with coupling 4 137 saturation stand 138 screw type pressure pump 139 sand bath 8 dia. 140 sand replacement apparatus ( small ) 141 sand replacement apparatus ( large ) 142 saturation stand for 4 i.d. 143 stand for thermometer 144 saturation stand for permeability undisturb sample 145 straight edge 146 sampling tubes 11 / 2 dia., 4long 147 sampling tubes 11 / 2 dia., 8 long 148 sampler m.s. 2 i.d. 149 sampling tube 3dia. 150 sampler 3 dia. * 24ht 151 sampler m.s. 3i.d. 152 surface sampler 4 dia.*8 ht 153 surface sampler 4 dia.*10 ht 154 sampler 4 dia.*10 long 155 soil sampler 4 dia.*18ht 156 sampler 4 dia.*20long 157 sampler 4 dia.*12long 158 brass sieve 8 dia., 425 micron 159 sieve set 8 dia. ( 2 set ) 160 sieve set 12 dia. ( 2 set ) 161 test tube stand 6 holes 162 test tube stand 8 holes 163 test tube stand 12 holes 164 triple beam balance ( 3kg ) 165 volume change device of perspex 166 voltmeter 0 to 500 v 167 gantry ( lifting arrangement for large box ) 168 aplab turbidimeter 169 grooving tool astm 170 grooving tool casagranda type 171 soil sampler 4 dia.*48long 172 straight edge 173 field cum laboratory balance 15 kg 174 top brass plate for shear of size 60*60*25 175 saturation device for direct shear cutter 176 pressure gauge 0 to 50 psi 177 burette stand 178 actuating rods ( tamping rod ) 179 wooden round plate 8 dia. 180 saturation device 181 brass nipple ( fitting to ab 10 klinger valve ) 182 m.s.vane 35 / 8*71 / 4 183 steel mould beam ( 22 1 / 8*3*23 / 4 ) 184 weld iron plate to the coupling 185 t connections ( for checking press.gauge ) 186 consolidation ring with radial arrangement 187 needle puller 188 metal strips 8cm*13mm*7mm 189 wooden saturation plate ( 16*16*1 / 2 ) 190 wooden frame 191 m.s.dolly ( for u.d. sampler ) 192 m.s.circular plate 193 adapter for pore pressure transducer ( plastic ) 194 swelling pressure equipment 195 m.s.tanks 50*50cm 196 m.s.frame for water tank 197 swelling arresting plate ( with 4 bolts ) 198 swelling pressure cell cutter 199 consolidation ring 200 permeability saturation stand for u.d. sampler 201 brass cock valve 1 / 2*3 / 8 202 stainless steel bar for auto compaction machine 203 gun metal perforated plates ( for k test ) 204 saturation stand for triaxial test 205 cylinder of m.s. 3.6cm dia. 206 godrej navatal lock 5 lever 207 enamelled bucket 10 1 / 2 long&11dia. 208 screw driver 4 1 / 2long 209 spanner double ended 210 plier taparia 8 211 ghamella ( iron ) 212 phavara 213 pick axes 214 hammer 10 lbs 215 hammer 5 lbs 216 crow bar 5 217 letter punch a to z 218 number punch 219 godrej navatal lock 220 steel glass 221 spatula 222 files 223 allen key 224 hack saw 225 level bottle 226 steel pimp 227 two cell everyday tourch 228 sujal water filter 229 adjustable spanner 230 chisel 1 / 4 * 4 231 file flat 232 file needle type 233 floring tool 234 fixed spanner 3 / 32 235 fixed spanner 5 / 16 236 garden scissor 237 hammer 1 lb 238 hammer 10 lb 239 hydraulic jack 5 ton capacity 240 hydraulic jack 20 ton capacity 241 phavaras 242 screw driver 12 243 screw driver 9 244 scissor 10 245 adjustable spanner 6 246 adjustable spanner 12 247 spanner double ended 248 spanner double ended 249 double ended spanner 6 / 7 250 water tank 251 wheel barrow 252 wire brush 253 wire mesh 254 stainless steel glass 255 vaccum cleaner 256 electric extension box 257 bench voice appr.20kg 258 kerosine tin empty, broken ( rs.2.00 / no. ) 259 teakwood box for spot galvanometer 260 tin plate 261 storewell water storage tank 262 wooden trays 263 wooden plates 264 wooden plates 265 consolidation cutter 266 casagrande porus tube pizometer 267 double proving ring ( 500 1500lbs ) 268 direct shear cutter 269 dial gauge ( rambold german make ) 270 extension rod 1 dia. 271 liquid limit device 272 liquid limit device ( motorised ) 273 mortor and pestle ( wooden ) 274 oven 15x15x18 275 oven 24x18x35 276 oven 45x45x45 277 proving ring 2000lbs 278 proving ring 100lbs 279 proving ring penetrometer 280 post hole type auger 4 dia. 281 sieve set 8 dia. 282 sieve set 8 dia. 283 sieve set 18 dia.g.i. 284 sieve set 18 dia. 285 sieve set 18 dia. ( 450mm ) 286 standard penetration testing equipments 287 distilled water plant 288 brass sieve set 289 dial indicator 290 max.min.density kit 291 plastic apparatus for hallow cylinder 292 set of weights 293 dial gauge clamp 294 gun metal disc 295 static compaction apparatus 296 teakwood planks 1 load frame electricity operated ( 5 ton capacity ) fitted in triaxial machine ( 1 no.amil & 1 no.precision ) 2 load frame mechanicaly operated ( 5 ton capacity ) 3 a ) bishop pore prersure apparatus ( sr.no. 67142 ) 4 b ) bishop pore prersure apparatus ( sr.no. 72001 & 72002 aimil ) 5 c ) bishop pore prersure apparatus ( precision make ) 6 a ) volume change self compensatory mercury control device aimil make ( sr.no.68030, 68036 ) 7 b ) volume change self compensatory 9 a ) stri 17 valume change ( special ( 0 to 25 ml ) cylindrical ( sr.no.68019 ) 10 b ) str 17 valume change ( special ) cylindrical ( sr.no.70032 & 70034 ) aimil make 11 i ) displacement meter type asd26 12 ii ) displacementtrundu cer type tdm 2500 13 relative density kit ( precision make ) 14 a ) infanetive valume change gauge ( with 30 psi water prersure ) sr.no.78028, str 78039 heico make & str 78038 aimil make 15 b ) volume change gauge ( horizontal ) model no.hs 28 135 ( heico make ) 16 consolido permeameter ( m / s. lawrance & mayo aimil ) 17 shrinkage limit kit 18 triaxial cell 11 / 2 dia. 3 long specimen sr.no.67178, 67179, 67181, 67169, 67175, 67176 & 71002 19 unversal triaxial cell 300 psi 20 votage staplizer 21 automation of triaxial & device equipment. 22 gems window type room air conditioner 1.5t capacity model no a450 sr no a / 805 2908 23 permeability set ( veriable head method ) 24 permeability set ( vairable head method ) 25 heavy metal rammer 26 light metal rammer 27 spray bottle plastic 28 waranashi make triple beam balance 29 baranger type balance 30 seamless sampler 31 static compaction device 32 reaction frame 33 consoldation cum saturation stand 34 amil make test sieve set 35 lynx made test sieve brass 36 saturation stand for permeabilty test 37 thraded rods 38 shrinkage dishes 39 datum bars 40 hydraulic jack 10 tc 41 hydraulic jack 50 tc 42 hydraulic jack 25 tc 43 trays of different size 44 field sampling kit spikes 45 stop watch 46 heico make 155 brass 4.75 mm 47 amil make sets cone penetometer 48 irom spaces 49 mis steel threoded rods 50 aimil universal triaxial test apparates ( s.no. slfa 67027, 67028 & 67029 ) 51 aimil testwell universal automatic compactor 52 consolidation test apparates ( belgium model floating type ) 53 small amil make direct shear machine 66064, 66076 54 air compressor electric operated ( khosala make ) sr.no.6635 55 thermostatically controlled ovens 2=45x45x45 cm 56 thermostatically controlled ovens 2= 90x60x45 cm 57 seive shaker with adaptor 58 motorised liquid limit apparatus 59 air compresor ( khosala make ) 60 vaccum pump 61 automatic compact 62 distilled water plant 63 triaxial shear test set 64 small direct shear 65 large size direct shear machine 1 oven ( hot air ) 2 portable lab oven 3 hot plate with energy regulator 4 saybalt viscometer 5 g.d.s. kilo balance 6 zenith refrigerator 7 hyadraulic extractor frame 8 steel tape ( 2 meter ) 9 computer ( kbs ) 10 hammers 11 trays 12 sieves 13 balance two pan 10 kg 14 hammers 15 single pan 200 gm 16 wight for balances 17 saand pouring cylinder 18 dial guages 19 electrical hot plate 20 water bath 21 aluminium tank 22 wire guage baskets 23 cbr apparatus 24 lock ( godrej navatal ) 25 aceessories f cbr 26 enameld bowls 27 sampling auger 28 stop watches 29 air fill foot pump 30 bicycle 31 aluminium bucket 32 benkelman beam appa. 33 fire extinguisher 34 stainless steel glass 35 water filter 36 steel chairs ( s type ) 37 steel folding chair 38 wooden box 39 revolving chair 40 revolving chair 41 t / w chairs...
22726317 tender for work of lifting of scrap from chp i premises & transporting it to major stores on as & when required basis for chp ltps khaperkheda. 2. work of reconditioning of suction bracket side covers of ash slurry pump. 3. procurement inter / after cooler shell & tube element for compressors of ahp i 4. supply of coal laboratory instruments, test sieves & lab wares at wmpi khaperkheda 5. procurement of ht breakers (bhel make) spares for chp i l, 500mw tps, khaperklheda....
22213780 supply of coal laboratory instruments, test sieves and lab wares at wtp i...
19902608 procurement of consumables chemicals and apparatus for coal testing laboratory for majri area.=> test sieve ( with calibration certificte ) , size 50 mm ( stainless steel ) , test sieve ( with calibration certificte ) , size 25 mm ( stainless steel ) , test sieve ( with calibration certificte ) , size 12.5 mm ( stainless steel ) , test sieve ( with calibration certificte ) , size 3.35 mm ( stainless steel ) , test sieve ( with calibration certificte ) , size 210 micron ( stainless steel ) , volumetric flask [ borosilicate ] , size 500 ml, bulb pipette [ with calibration certificate ] , size 10 ml, burette [ with calibration certificate ] , size 25 ml, benzoic acid ar / gr , 500 grams bottle, distilled water [ with chromatography test certificte ] , size 1 ltrs bottle, k type thermometer with sensor digital [ pyrometer ] [ with calibration certificate ] ...
19648784 procurement of consumables chemicals and apparatus for coal testing laboratory for majri area.=> test sieve ( with calibration certificte ) , size 50 mm ( stainless steel ) , test sieve ( with calibration certificte ) , size 25 mm ( stainless steel ) , test sieve ( with calibration certificte ) , size 12.5 mm ( stainless steel ) , test sieve ( with calibration certificte ) , size 3.35 mm ( stainless steel ) , test sieve ( with calibration certificte ) , size 210 micron ( stainless steel ) , volumetric flask [ borosilicate ] , size 500 ml, bulb pipette [ with calibration certificate ] , size 10 ml, burette [ with calibration certificate ] , size 25 ml, benzoic acid ar / gr , 500 grams bottle, distilled water [ with chromatography test certificte ] , size 1 ltrs bottle, k type thermometer with sensor digital [ pyrometer ] [ with calibration certificate ] ...
19372489 supply of seed laboratory equipments to research division in pune district, 1 laboratory aspirator cost 2 electric seed scarifier 3 seed sampling parkhi 4 seed sieve shaker 5 flexible arm illuminated magnifier 6 seed blower 7 destoner 8 sampling triers 9 seed grinder 10 seed hand test sieves ( round brass ) 11 hand test sieves ( wooden ) 12 non destructive moisture meter 13 seed precision divider ( gamet type ) 14 computerised seed counter 15 electric oven / lab oven 16 computerised hot air seed dryer ( cabinet type ) 17 installation of germination chamber with air cooler, time controller, light, electricity, temperature, & humidity controller & stainless steel rack 18 digital temperature & humidity indicator 19 weighing scale 20 illuminated purity work board 21 autoclave 22 sample pans...
19265313 supply of seed laboratory equipments to research division in pune district, 1 laboratory aspirator cost 2 electric seed scarifier 3 seed sampling parkhi 4 seed sieve shaker 5 flexible arm illuminated magnifier 6 seed blower 7 destoner 8 sampling triers 9 seed grinder 10 seed hand test sieves ( round brass ) 11 hand test sieves ( wooden ) 12 non destructive moisture meter 13 seed precision divider ( gamet type ) 14 computerised seed counter 15 electric oven / lab oven 16 computerised hot air seed dryer ( cabinet type ) 17 installation of germination chamber with air cooler, time controller, light, electricity, temperature, & humidity controller & stainless steel rack 18 digital temperature & humidity indicator 19 weighing scale 20 illuminated purity work board 21 autoclave 22 sample pans...
15366188 supply of test sieve calibrated standard and ultrasonic test sieve cleaner....
15015244 supply of test sieves...
14409878 supply of test sieves...
12818728 procurement of miscelleneous items = ‘1 enamel trays ( 18”x15” ) 2 enamel trays ( 15”x12” ) 3 enamel trays ( 12”xlo” ) 4 plastic buckets 15 liters 5 beaker plastic ( 500 ml ) 6 test sieve set ( 6, 10, 20, 30, 50, 70, 100, 1 5o, 20ô, 270, 325, 400 mesh __ rectangular plastic water tank ( 300 liters ) sintex / vectus / plasto white colour indoor purpose...
12812948 procurement of miscellaneous items enamel trays, plastic buckets, beaker plastic, test sieve set mesh, rectangular plastic water tank...
12181766 tender for supply and installation of instruments 1. digital stop watch 2: inlrared thermometer 3. barometer 4. hygrometer digital contact tachometer digital non contact tachometer rockwell curn brinell hardness testing ma chines 8. digital electronic balance 9. platform type balance 10. spring balance 11. hot air oven digital soil moisture meter grain moisture meter 14. dynamometer — spring type 15. hydrualic . dynamometer 16. fuel consumption measurement device 17. bulk density apparatus isi soil test sieve 18. i speedy soil moisture metel ...
10360967 e tender no.11 for purchase of equipments under rusa budget for rusa center and projects, ( 1.01 system with fully automated flash chromatography and prepaative high performance liquid chromatography with essential accessories. 1.02 water purification system. 1.03 nanodrop uv vis spectrophotometer with essential accessories. 1.04 all purpose main drive with following additional equipment: 1. dry granualtor 1 no. 2. universal gearing 1 no. 3. wet granulator with mesh size 1.0 to 2.5mm 1 no. 4. blender double cone 1 no. 1.05 analytical balance 1.06 electromagnetic sieve shaker with additional accessories. 1. test sieve ( 100mm dia x 25mm h ) and bss sieve no.10, 14, 18 , 22, 25, 30, 36, 44, 52, 60, 72 and 85. 2. lid and receiver for 100mm dia x 25mm h sieve. 3. particle size analyzer software. 1.07 freeze dryer ( lyophiliser ) 1.08 flame photometer 1.09 fluid bed dryer 2.01 microplate reader 2.02 pilot / lab scale extraction unit in glass with accessories ( gmp model ) 2.03 lab scale spray dryer 2.04 vaccum tray dryer ( lab scale ) 2.05 rota evaporator 3.01 hi temp vacuum ovens model 3625a 1 capacity 18.4l ( 0.65 cu. ft. ) temp. range ambient +10° to 280°c 240v 50 / 60hz, 1000w; 4.2a 3.02 brookfield viscometer lv grade 3.03 10 ltr rrdu with column section, heat exchanger 3.04 50 ltr rrdu with column section, heat exchanger 3.05 sla technology 3d printer with resolution as low as 25 micron compatible with resin 3.06 coating applicator automatic motorized film applicators comes as one universal base with user selectable head attachments allowing the flexibility to test using standard film applicators ( filmographs ) , spiral bar coaters or using the combined attachment of both the film applicator and spiral bar attachment 11 pre set transverse speeds from 0.2 3.9 inches per second. 4.01 microscope ( compound ) 4.02 heating mantel 1000 ml 4.03 heating mantel 250 ml 4.04 heating mantel 500 ml 4.05 balance 4.06 macerator 4.07 digital potentiometer 4.08 digital ph, conductivity & temperature mete 4.09 clevenger apparatus / essential oil extractor 4.10 colorimeter 4.11 water bath 4.12 rota mental 4.13 magnetic stirrer 4.14 magnetic stirrer with hot plate 4.15 vacuum pump ( oil free ) 4.16 domestic refrigerators 4.17 grinder 4.18 shore ( durometer ) hardness test with shore a to d 4.19 hot air oven 4.20 melting / boiling point apparatus 4.21 ultra sonic bath 4.22 mechanical stirrer 4.23 muffle furnace with silica crucible and essential assecories 4.24 soxhlet apparatus with heating mantel of 5 liter capacity 4.25 soxhlet apparatus with heating mantel of 1 liter capacity 4.26 steam distillation assembly with essential accessories 4.27 circulating temperature water bath 4.28 uv cabinet 4.29 multi mill 4.30 pulverizer 5.01 vacuum pump 5.02 heating mantle cap. 250 ml 5.03 heating mantle cap 500 ml 5.04 heating mantle cap. 1000 ml 5.05 rotamantal 1 lit 5.06 rotamantal 2 lit 5.07 color laserjet pro mfp m274n 5.08 pencil hardness tester complete with stand and a series of 14 pencils, ranging from 6b to 6h hardness values. 5.09 scratch tester materials up to 12.7mm ( ½” ) thick by 101mm ( 4” ) square or round load on the tool, from 0 1000g ( 0 2.2lb ) 5.10 abrasion tester thermal circuit breaker prevents overloading specimen holder and adjustment gage for setting tolerance limit contact force 2.5 n to 10 n, variable via interchangeable weights 5.11 digital weighing balance 300 gm 0.01gm 5.12 digital weighing balance 1 kg 5 kg )...
10330493 supply of stainless steel test sieves...
7726732 supply of test sieves...
7689684 supply of following items beaker glass, beaker glass 50 ml brand: borosil/vensil/qualigen/merck no 6 2 324303 beaker glass 100ml brand: borosil/vensil/qualigen/merck no 20 3 324304 beaker glass 150 ml brand: borosil/vensil/qualigen/merck no 6 4 324305 beaker glass 250 ml brand: borosil/vensil/qualigen/merck no 4 5 324307 beaker glass 500 ml brand: borosil/vensil/qualigen/merck no 4 6 336511 crucible nickel 25 ml with lid (made of imported nickel); wall thickness 0.3mm (min) no 15 7 364604 filter paper whatman no.4; 11cm dia. pkt 20 8 365344 funnel glass long narrow stem 75 mm brand: borosil/vensil/qualigen/merck no 10 9 421347 laboratory gloves (latex) pair 4 10 437134 measuring cylinder glass, 50 ml, class a, accuracy with certificate brand: borosil/vensil/qualigen/merck no 2 11 431174 microscope cover glass box of 20 pkts x 100 gm each, size 18mm square, thickness no. 1 brand: gold coin/blue star box 10 12 496204 separating funnel spherical, 125 ml, straight bore glass key stop cock, including stopper brand: borosil/vensil/qualigen/merck no 10 13 507660 tissue paper, 2 ply; super & soft, white colour length 20x2 meters (approx) no 100 14 505770 tongs surgical, s.s 8” long no 6 15 524231 volumetric flask glass 50 ml with including stopper, class a with work certificate brand borosil/vensil/qualigen/merck no 6 16 524232 volumetric flask glass 100 ml with including stopper, class a with work certificate brand: borosil/vensil/qualigen/merck no 10 17 464161 polythene carboyl with inner lid and screw cap 2 litre capacity no 10 18 464162 polythene carboyl with inner lid and screw cap 10 litre capacity no 3 19 507780 test sieves jayant brand 8’’dia x 2’’ height with ss wire mesh; frame of spun brass 1) 300 micron 1 no. 2) 212 micron 1 no. 3) 106 micron ...
6008023 supply of test sieves 8 inches diameter, 50 mm height brass frame with stainless steel wire mesh along with receiver. 1) astm mesh size no.10...
5965771 supply of test sieves...
5886712 supply and installation of laboratory equipments for foodgrains digital moisture meter, seed hand test sieves round brass, grain analysis kit, electronic weighing scale....
5843758 supply and installation of laboratory equipments for foodgrains digital moisture meter, seed hand test sieves round brass, grain analysis kit, electronic weighing scale. 2. supply of grain clening and grading machine with attachments....
5820541 supply of electromagnetic sieve shaker (dry and wet) with suitable lid, receiver and test sieves 200m dia x 25 mm ht (8 nos : 28 um, 45 um, 106 um, 250 um, 500 um, 1mm, 2 mm, 4 mm each ) note: (1) (detailed specifications as per annexure) (2 )scanned quotations are not acceptable and such offers shall be rejected outrightly without any further reference to the tenderer....
5769118 supply & installation f laboratory equipment for foodgrains (digital moisture meter, seed hand test sieves (round brass) grain anlaysis kit electronics weighing scale. supply of grain clearing and grading machine with attachment...
5685466 test sieves of 4 inch diameter with frame made of brass or stainless steel with stainless steel wire mesh of aperture size mentioned below : aperture size ( micron) 5...
5677385 supply of test sieves of 4 inch diameter with frame made of brass or stainless steel with stainless steel wire mesh of aperture size mentioned below : aperture size ( micron) 5...
5667200 test sieves of 4 inch diameter with frame made of brass or stainless steel with stainless steel wire mesh of aperture size mentioned below : aperture size ( micron) 5...
5661920 supply of test sieves of 4 inch diameter with frame made of brass or stainless steel with stainless steel wire mesh of aperture size mentioned below : aperture size ( micron) 5...
5656958 supply of test sieves of 4 inch diameter with frame made of brass or stainless steel with stainless steel wire mesh of aperture size mentioned below : aperture size ( micron) 5...
5650167 supply of test sieves of 4 inch diameter with frame made of brass or stainless steel with stainless steel wire mesh of aperture size mentioned below : aperture size ( micron) 5...