39938036 tender for installation of 08 no. new clustered (6) light duty tube well (solar) (depth 100m) of size 150 mm x 100 mm nb. with pvc pipes & pvc ribbed screen at chakdaha & ranaghat i block...
39589809 drilling and construction of bore well and tube well for police station / sub police station / arm out post of gadchiroli district....
38343111 1 replacing tube well pipes and repair g.i pipeline near lal puliya at mkd i ocm of umrer sub area. 2 repairing and maintenance of main gate valves near amb river and leaning umred ocm of umrer sub area....
37754670 tender for fitting of solar tube well and hand pump work...
37725360 providing tube wells at various location, stainless steel railing in various building, painting of waterbody in front of cafeteriya and covering over filter tank in aquarium building botanical garden visapur tah. ballarpur, dist. chandrapur...
37721856 repair and maintenance of hand pump and tube well work, maintenance of garden, tractor driver, motor pump, mask, hand gloves, rain coat, etc...
37701941 tender for operate of water pump /tube well, pipe line repair, maintenance/repair work...
37449390 tender for flushing of bore well other allied work at rehab site at docsa. civil works. 1. development of tube well in accordance with is : 2800 ( parti ) and is: 11189, to establish maximum rate of usable water yield without sand content ( beyond permissible limit ) , with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by v notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i / c disinfection of tube well, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of engineer incharge hrs 25.00 2. clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. sqm 6, 500.00 please quote your item rate for item no. 01 to 02 including all t...
37308330 replacement of gi pipe line in place of damage hdpe pipe near tube well and work shop line at singhori ocm under bssa....
37293984 tender for fitting of electric pump, bore well fitting water supply, new tube well digging work...
37220846 pilot innovative project in the saline belt (construction of cement nalla bandh and tube well with nalla deepening and widening with doh on singhadi nalla at borala tq.daryapur dist.amravati)...
37053155 tender for pilot innovative project in the saline belt (construction of cement nalla bandh and tube well with nalla deepening and widening with doh on singhadi nalla at borala tq. daryapur dist. amravati....
37038743 pilot innovative project in the saline belt ( construction of cement nalla bandh and tube well with nalla deepening and widening with doh on singhadi nalla at borala tq.daryapur dist.amravati ) ...
37017958 providing tube well, pumping machinery at village shingave tal.shirpur dist.dhule under 15th finance commission 2021 22...
36950472 providing & supplying of tubewell spares with repairing and flushing under jurisdiction of m.cl. ballarpurtaluka:ballarpur , dist:chandrapur 1 removing, opening and fitting of submersible pumpset , pipes , cables from tubewell ( labour charge ) 2 rewinding of 0.5 hp submersible pump motor 3 rewinding of 1 hp submersible pump motor 4 rewinding of 3 hp submersible pump motor 5 rewinding of 5 hp submersible pump motor 6 rewinding of 7 hp submersible pump motor 7 rewinding of 7.5 hp submersible pump motor 8 rewinding of 10 hp submersible pump motor 9 rewinding of 12 hp submersible pump motor 10 new gunmetal bushes 11 new oil seal 12 thrust bearing 13 impeller bushesh 14 shaft sleeve 15 3 inch nipple 16 opening and reparing of all stages of pump 17 testing and trial including startor, main switch, and wiing 18 coupling adopter 19 installation of new startor of 15 amp ( branded company ) 20 installation of new startor of 24 amp ( branded company ) 21 15 amp realay for startor ( branded company ) 22 24 amp realay for startor ( branded company ) 23 realay fo star delta startor ( branded company ) 24 contactor set for startor 25 3 core 2.5 sqmmflat cable ( branded company ) 26 3 core 4 sqmm flat cable ( branded company ) 27 star delta startor ( branded company ) 28 coil for startor ( branded company ) 29 mcb 32 / 63 / amp ( branded company ) 30 elcb 32 / 63 amp ( branded company ) 31 single phase preventor / protector 32 automatic control pannel board consisting of ameter, voltmeter , fuse, phase indicator ( branded company ) 33 volt meter 34 amper meter 35 flange pair 36 bore cap 37 removing of fixed motor pump ( khali padlela pump kadhane ) 38 coloumn pipe 2 inch * 10 feet ( branded company ) 39 tube well flushing by using compressor machine 40 coloumn 2 inch adopter 41 16 amp 440 volt main switch 42 32 amp 440 volt main switch 43 63amp 440 volt main switch 44 multimeter 45 isi mark 2½ inch gi pipe of 10 feet ( branded company ) 46 isi mark 2½ inch gi pipe of 10 feet ( branded company ) 47 gi pipe 2 inch * 10 feet ( branded company ) 48 16 amp 440 volt fuse / kitkat 49 32 amp 440 volt fuse / kitkat 50 63 amp 440 volt fuse / kitkat 51 16 gauge gi sheet box size of 3*2 containg 12 mm plywood having size 52 removing ofgi box along with all equipments and shifted it to new box ( as per quotation ) 53 capacitor bank having range off 2 kvr t0 16 kvr ( branded company ) 54 rotar through and bush fitting by using lathe machine 55 head bush 56 motar neck ring 57 gi bend2 inch 58 gi bend 2.5 inch 59 gi socket 2 inch 60 gi socket 2.5 inch 61 motar base 62 motor assembly 63 pump housing 64 pump shaft 65 pump head assembly 66 motor pump coupling 67 motor and pump stud 68 cloumn pipe2 inch 69 column pipe 2 inch socket 70 column pipe 2.5 inch 71 column pipe 2.5 inch socket...
36877884 construction of cement concrete road at gopal krushna nagar mouza wathoda from shraddha tube well to kokate in prabhag no. 26...
36819994 tender for construction of cement concrete road at gopal krushna nagar mouza wathoda from shraddha tube well to h/o. kokate in prabhag no. 26...
36072977 tender for drilling of 150mm dia. tube well and providing fixing, erecting & commissioning of submersible pump at 33kv s/stn manatri tq. telhara dist....
35866107 tender for provision of iron lid on tube well inside campus aipt under ce ( central ) pune...
35808173 kudesavali water supply scheme ta gondpipri dist chandrapur under jal jeevan mission tube well rising main pumping machinery switch control room rcc esr distribution system misc works household tap connections...
35808170 bijoni water supply scheme ta bhadrawati dist chandrapur under jal jeevan mission tube well rising main pumping machinery switch control room rcc esr distribution system misc works household connections...
35609041 drilling of borewell and tubewell with instalation handpump and other allied works , drilling of borewell and tubewell with instalation handpump and other allied works , a1 ) dth drilling work of 150mm dia and related work drilling of 150 mm diameter borewell . ( drilling of200 / 215 mm dia. insoft strata & 150 mm dia. drilling in hard rocks including transportation & labour charges on site of borewell ) , 2 ) dth drilling work of 150mm dia and related work yield testing of borewell using90° v notch by air lift method after completion of drilling work , b1 ) rotary drilling work of 150mm dia tube well and related work . drilling work , 2 ) rotary drilling work of 150mm dia tube well and related work transportation , 3 ) rotary drilling work of 150mm dia tube well and related work gravel packing , 4 ) rotary drilling work of 150mm dia tube well and related work development , 5 ) rotary drilling work of 150mm dia tube well and related work bell plug , 6 ) rotary drilling work of 150mm dia tube well and related work wooden block of mango tree ( 1mx0.15x0.2m ) , 7 ) rotary drilling work of 150mm dia tube well and related work m.s. clamps ( 1mx0.1mx0.01m ) , c1 ) drilling work of 115mm dia ( surface bore, probe bore, inwell borerecharge shaft ) drilling of 115 mm diameter borewell . ( drilling of150 mm dia. insoft strata & 115 mm dia. drilling in hard rocks including transportation & labour charges on site ) , 2 ) drilling work of 115mm dia ( surface bore , probe bore, inwell borerecharge shaft ) yield testing of borewell using90° v notch by air lift method , 3 ) bencher shifting in dug well and drawing out materal from dug well including labour of drawing out cutting material of drilling. ( note rate of water removal from well not included in above rate ( de watering ) ) . , 4 ) for non conventional plan for ( for jackwell, bbt, fsc, sbt ) labour charges for loading & unloading of bencher & spare in dugwell , 5 ) for non conventional plan for 115 mm dia bore hole ( for jackwell, bbt, fsc, sbt ) refiling of bore hole of bore blasting for security purpose. rate apply only for refiling bore hole by jacket well, bbt & sbt , f1 ) rate for ms threaded casing pipe 150 mm diameter 150 mm diameter m.s threded casing pipe, m.s.e.r.w. medium class as per is:1239 with socket , rate forlowering & grouting work of 150 mm dia m.s. threded casing pipemserw medium class as per is:1239 with socket thikenes 4.8 mm , 2 ) rate for ms threaded casing pipe 150 mm diameter borecap for 150 mm diameter m.s thrededcasing pipe ( is 1239 ) , 4 ) rate for ms nonthreaded casing pipe 150 mm diameter 150 mm diameter m.s non threded casing pipe, m.s.e.r.w. medium class as per is:1239 with socket & grouting ( minimum thicness 4.8 mm ) for 150mm dia. tubewell as per casing policy , 5 ) rate for ms nonthreaded casing pipe 150 mm diameter 150 mm diameter m.s non threded casing pipe, m.s.e.r.w. medium class as per is:1239 with socket & grouting ( minimum thicness 4.8 mm ) for 150mm dia. tubewell as per casing policy ( sloted pipe ) , rate forlowering & weldingwork of 150 mm dia m.s. non threded casing pipemserw medium class as per is:1239 thikenes 4.8 mm , 7 ) rate for ms threaded casing pipe 125 mm diameter 125 mm diameter m.s threded casing pipe, m.s.e.r.w. medium class as per is:1239 with socket ( minimum thicness 4.8 mm ) for 115mm dia. dth borewell drilling , rate forlowering & grouting work of 125 mm dia m.s. threded casing pipemserw medium class as per is:1239 with socket thikenes 4.8 mm , 8 ) rate for ms threaded casing pipe 125 mm diameter borecap for 125 mm diameter m.s casing pipe ( is 1239 ) , 2 ) rate of u pvc casing pipe borecap for 150 mm diameter upvccasing pipe , 4 ) rate of pvc casing pipe 180 mm diameter pvc casing pipe for 150 mm diameter borewell ( 6 kg / cm2 ) ( is 4985 1988 ) , rate forlowering & grouting work of 180 mm dia pvc.casing pipe ( 6 / 8 kg / cm2 ) ( is 4985 1988 ) ( upto 12 meter ) , rate forlowering & grouting work of 180 mm dia pvc.casing pipe ( 6 / 8kg / cm2 ) ( is 4985 1988 ) ( more than 12 meter ) , 5 ) rate of pvc casing pipe 180 mm diameter pvc casing pipe for 150 mm diameter borewell ( 8 kg / cm2 ) ( is 4985 1988 ) , 6 ) rate of pvc casing pipe borecap for 180 mm diameter pvccasing pipe , g1 ) rate of u pvccasing pipe upvc casing pipe for 150 mm diameter borewell drilling ( as per is 12818 1992 outside dia.165.4 mm minimum thickness 5.7 to 6.5 mm including grouting , 7 ) rate of u pvc casing pipe upvccasing pipe for 115 mm diameter borewell drilling ( as per is 12818 1992 outside dia.140 mm minimum thickness 6.5 to 7.3 mm including grouting , 8 ) rate of u pvc casing pipe borecap for 125 mm diameter upvccasing pipe , 9 ) rate of pvc casing pipe 140 mm diameter pvc casing pipe for 115 mm diameter borewell drilling ( as per is ( 4 kg / cm2 ) is 4985 1988 exluding grouting. , transportation and loading unloading charges for ms casing pipe for average distance 40 km ( mjp dsr 2021 22 pg no 17 ) , rate forlowering & grouting work of 140 mm dia pvc.casing pipe ( 4 kg / cm2 ) ( is 4985 1988 ) , 10 ) rate of pvc casing pipe 140 mm diameter pvc casing pipe for 115 mm diameter borewell drilling ( as per is ( 6 kg / cm2 ) is 4985 1988 , rate forlowering & grouting work of 140 mm dia pvc.casing pipe ( 6 kg / cm2 ) ( is 4985 1988 ) , 3 ) rate of pvc casing pipe borecap for 140 mm diameter pvccasing pipe , making charges for required slotted pvc casing pipe for use of recharge shoft , h1 ) hand pump installation and related work installation of india mark ii handpump in 115 / 150 mm dia.borewell. , 2 ) hand pump installation and related work excavation work of platform , 3 ) hand pump installation and related work construction of platform as per unicef design ( p.c.c work 1:2:4 ) , 4 ) hand pump installation and related work dry rubber stone filling in115 / 150 mm dia borewell , i1 ) dual pump installation special water chamber for dual pump ( galvanised ) , 2 ) dual pump installation ss bottam nipple for dual pump installation , transportation for handpump instalationand platform construction work , k1 ) yeild testing of borewellby electric pump with generator. , 2 ) yeild testing of borewellby electric pump without generator. , l1 ) removell & installation of hand pump india mark iifor flushing, special repair and yield test ( with own repeair kit ) , m ] information board for local development fund ( mla / mp / zp member & others fund ) ( 60 cmx30cm 16 gauge, central angle 40x40x5 mm 2m long, 25x25x5 border frame with cement concrate foundation installation ) , a ] 150 mm dia old borewell redrilling / fliushing work by using hammer bit ( gsda rate 18 19 ) , b ] 115 mm dia old borewell redrilling / fliushing work by using hammer bit ( gsda rate 18 19 ) , o ] construction of new hand pump platform at existing old platform including labour, material & transportation. , c ] 150 / 115 dia borewell regeneration / redrilling / fliushing work with transportation...
35520004 connection of pipe line near tube well of sam office to main pipe line near ctr under gouri sub area...
35467442 tender for drilling of 150mm dia. tube well and providing fixing, erecting & commissioning of submersible pump at 33kv s/stn manatri tq. telhara dist. akola....
35415914 installation of p/m on tube well under 15 finance commission at lasur tal chopada dist jalgaon p/m on tube well under 15 finance commission...
35410571 tender for installation of handpump on bore well / tube well...
35391108 providing tube well and pumping machinary at nagalwadi tal chopda dist jalgaon...
35163904 tender for construction of safety wall, fitting of window, tube well, construction of plinth protection, fixing aluminum window, paver block, cc road construction, polycarbonate sheet, paint of court building, door fitting, water motor, construction of chemical lab work...
34740908 tender for installation of handpump on bore well / tube well...
34549319 supply of submersible motor pump , 2 installation of tube well , electrical meter ,capacitor, street light , replacement of burnt electric meter , and supply installation cable , new electric meter ,etc...
34164727 boring one no. tube well at adasa ug to oc mine under saoner sub area ( 4th call ) . ...
34072781 repairing of existing tube well used for water supply at office premises, substation, canteen etc. at amalgamated yekona sub area of majri area....
33988567 rural water supply15th fin. commission gp level works 1 providing fhtc connection under retro fitting, 2. providing pumping machinery for tube well 3. providing pipe line for distribution system at2021 / 22 in works ofarea at dongar kathora, tal yawal dist jalgaon ms425301....
33834682 supplying various types of material at grampanchayat tanu , cement , khadi 20mm , murum , natural sand , crush sand , bricks , steel , rcc pipes 300 mm dia , tremix treatment , labour charges , jcb , water tanker , roller , concrete mixer , sock pit , khadi 40mm , khadi 60mm , patra , angle , pharashi , pever block , door 2.5*6.50 , toilet seat , wall painting , cement benches , jcb , fan , door 7 foot by 3 foot , dustbin , 5 hp motar , 7 hp motar , pvc pipe 2.5 inch , pvc pipe 3 inch , hdpe pipe 2.5 inch , hdpe pipe 2 inch , tube well drilling , cable 0.75mm , led bulb 24 w , cable 0.75mm , vajankata , led tv with softwear 24 inch , water filter , cooker 10 l , table , cupbard , chairs , sport kit...
33738132 supplying various types of material supllying various types of material at grampanchayat tanu , cement , khadi 20mm , murum , natural sand , crush sand , bricks , steel , rcc pipes 300 mm dia , tremix treatment , labour charges , jcb , water tanker , roller , concrete mixer , sock pit , khadi 40mm , khadi 60mm , patra , angle , pharashi , pever block , door 2.5*6.50 , toilet seat , wall painting , cement benches , jcb , fan , door 7 foot by 3 foot , dustbin , 5 hp motar , 7 hp motar , pvc pipe 2.5 inch , pvc pipe 3 inch , hdpe pipe 2.5 inch , hdpe pipe 2 inch , tube well drilling , cable 0.75mm , led bulb 24 w , cable 0.75mm , vajankata , led tv with softwear 24 inch , water filter , cooker 10 l , table , cupbard , chairs , sport kit...
33304416 drilling and construction of bore well and tube well for police station/sub police station/arm out post of gadchiroli district. ...
32822555 ( a ) provision of ground water storage tank of 10 lakhs ltrs. capacity at amgaon. ( b ) drilling of 6 nos. deep tube wells at river bank of bagh river and allied works under jurisdiction of aden / g. ( c ) improvements to existing pump house, intake well & approach road to bagh river pump house bet ( bra htt ) stations under aden / gondia. ( d ) provision of rcc oh tank of capacity 2, 25, 000 ltrs. against replacement of existing old leaky ms tank at gondia., ...
32605357 tender for tube well unloading works at borkhedi depot 2022 23...
32604008 drilling of tube well and installing submersible pump set along with cpvc pipe line at 33 kv s/stn., ghonsa, tq. wani, dist. yavatmal...
32597075 notice no 3 providing tube well and pumping machinery at gp tonde tal. shirpur dist dhule...
32066093 providing of manpower, rain coat, mask, gloves, tube well, hand pump, fleshing, printing of slip book, supply of tractor with driver, jcb crane etc...
32016519 drilling of tube well and installing submersible pump set along with cpvc pipe line at 33 kv s/stn., ghonsa, tq. wani, dist. yavatmal...
31576386 boring one no. tube well at adasa ug to oc mine under saoner sub area (3rd call). b ...
31404111 providing tube well , pumping machinery, pipeline , rcc haal at village bhatane tal shirpur dist. dhule 15th fc ...
31232577 supply for equipment for museum of community medicine department deep tube well, rapid sand filter, sanitary well, pit laterine, slow sand filter, trench letrine, horrocks apparatus etc...
30465119 construction for re designing and retrofitting courts at taluka court complexes of existing court building at. jalgaon jamod dist. buldhana false ceiling tube well and furniture work ) under 14th finance commission ) ...
30382586 erection of solar tube well work...
30352907 making ro plant with shed and tube well for community use at amalgamated yekona i and ii oc project under yekona sub area of majri area. making ro plant with shed and tube well for community use at amalgamated yekona i and ii oc project under yekona sub area of majri area....
30306461 tender for fabrication and erection of various size pipe lines of ms ss and ms structure and lifting shifting and erection of equipments rasayani unit as per the file attached. earth work in excavation by mechanical means ( hydraulic excavator ) / manual means over areas ( exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan ) includingdisposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressedwater reservoir, sump & stairs etc. 2 filling available excavated earth ( excluding rock ) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. all kinds of soil 3 supplying and filling in plinth, under floor, foundations etc.with sand ( fine ) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete. 4 providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering all work upto plinth level: 1:3:6 ( 1 cement: 3 fine sand : 6 graded stone aggregate 20 mm nominal size ) 5 providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement all work upto plinth level: 1:1½:3 ( 1 cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size ) 6 reinforced cement concrete work in walls ( any thickness ) , including attached pilasters, buttresses, plinth and skirting courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement 1:1½:3 ( 1 cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size ) 7 reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement 1:1½:3 ( 1 cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size ) 8 centering shuttering including struttings, propping etc. and removal of form work for: walls ( any thickness ) including attached pilasters, buttresses, plinth and string courses etc. using shuttering ply 9 suspended floors, roofs, landings, balconies and accessplatform with 12 mm thick shuttering ply 10 lintels, beams, plinth beams, girders, bressumers and cantilevers with shuttering ply 11 columns, pillars, piers, abutments, posts and struts with shuttering ply 12 reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.thermo mechanically treated bars of grade fe 500d or more 13 first class brick work in foundation and plinth including cost of all materials as required complete.in cement mortar 1:4 ( 1 cement : 4 fine sand ) . 14 first class brick work in superstructure above plinth level & upto floor five level including cost of all materials as required complete: in cement mortar 1:4 ( 1 cement : 4 fine sand ) . 15 half brick masonry work with first class bricks in superstructure upto floor five level including cost of all materials as required complete: in cement mortar 1:4 ( 1 cement : 4 fine sand ) 16 cement concrete flooring 1:2:4 ( 1 cement : 2 fine sand : 4 graded stone aggregate ) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate 17 12 mm cement plaster of mix. in cement mortar 1:4 ( 1 cement : 4 fine sand ) 18 15 mm cement plaster on the rough side of single or half brick wall of mix: cement mortar 1:4 ( 1 cement : 4 fine sand ) 19 providing and fixing 1mm thick m.s. sheet door with frame of 40x40x6mm angle iron and 3mm m.s. gusset plates at the junctions and corners, & with cleats with bolts & nuts, rivets, locking arrangement, handles, hooks & eyes, pinlets including embedding in cement concrete of required grade for fixing in position, all necessary fittings, including applying a priming coat of approved steel primer etc. complete as required: using m.s. angels 40x40x6 mm for diagonal braces 20 steel work in built up tubular ( round, square or rectangular hollow tubes etc. ) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. hot finished welded type tubes 21 providing corrugated g.s. sheet roofing including vertical / curved surface fixed with polymer coated j or l hooks, bolts and nuts 8 mm diameter with bitumen and g.i. limpet washers or with g.i. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete ( up to any pitch in horizontal / vertical or curved surfaces ) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.63mm thick with zinc coating not less than 275gm / m2 22 distempering with dry distemper of approved brand and manufacture ( two or more coats ) of required shade on new work, over and including water thinnable priming coat to give an even shade. [ payment shall be made after submission of test certificate issued by the manufacturer ] . new work ( two or more coats applied @ 3.84 kg / 10 sqm 23 finishing walls with acrylic smooth exterior paint of required shade of approved brand and manufacture [ payment shall be made after submission of test certificate issued by the manufacturer ] : i ) new work ( two or more coats applied @ 1.67 litre / 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg / 10 sqm ) 24 neat cement punning 25 painting with synthetic enamel paint of approved brand and manufacture to give an even shade [ payment shall be made after submission of test certificate issued by the manufacturer ] : two or more coats on new work 26 providing and placing of g.i. pipe over the pump house on top portion of the r.c.c. column as per specification and the direction of the engineer in charge. ( i ) .150mm dia 27 drilling and boring pilot hole in any soil strata by manual means, collection of soil samples of different strata met with during drilling at various suitable levels, preservation of samples in polythene bags / sample boxes and disposal of excess soil or mud, including the cost for water etc. as required to maintain the pilot hole properly as per specification and direction of the engineer in charge. ( i ) 100mm dia 28 reaming of pilot hole to an enlarged bore hole in any soil strata bymanual means, disposalof excess soil or mud, including the cost for water etc. as required to maintain the bore hole properly as per specification and direction of the engineer in charge. i ) from 100 mm dia pilot hole to 300 mm bore hole. 29 providing & lowering of upvc pipe as per is 12818 after washing of the bore hole by manual means, disposal of the bore hole by manual means as per specification and direction of the engineer in charge. ( a ) cm casing pipes 30 125 mm dia 31 100mm dia 32 b ) . rs pipe ( i ) . 100mm dia 33 washing and developing of tube well by using hand pump or by any suitable method and testing of the well as per specification and direction of the engineer in charge. 34 providing fixing of upvc reducer suitable for upvc cm casing or cs casing or rs pipes as per specification and direction of the engineer in charge. ( ii ) .125x100mm dia 35 providing fixing of upvc end cap / well suitable for upvc cm casing or cs casing or rs pipes as per specification and direction of the engineer in charge. ( i ) .100mdia 36 providing and shrouding of deep tube well assembly with washed pea gravels ( 2.0 4.75 mmeffective size ) as per specification ( is:4097 ) and direction of the engineer in charge.with contractors rig1 ) pea gravels obtained from durgapur, west bengal. 37 providing earthing with perforated 40mm dia g.i. pipe ( medium class ) ( 12mm dia perforation ) , laying of 40mm dia g.i. wire from earth electrode to panel, including excavating hole of 600 mm dia and refilling with salt and charcoal / coke in alternate layers of 300 mm, as per standard specification and direction of the engineer in charge.i ) for single phase connection with 2.50 mtr. long g.i.pipe 38 providing and fixing of housing clamp ( made with12mmthick ms sheet ) along with well cap ( made with 10 mmthick ms sheet ) with necessary arrangements for sbdtw as per specification and direction of the engineer in charge. ( i ) .125mm dia 39 supplying and fitting fixing of submersible pump of 2000 / 3000 gph capacity, 60 mtr. head with motor of required capacity single phase in / c 40 mm dia 30.00 mtr. heavy duty g.i. pump assembly and reducing socket, delivery band 90 degree non return valve and fitting etc. as per direction of the engineer in charge. 40 supplying & fitting of panel box of ms sheet with locking arrangement comprises with starter, main switch, busier ammeter, volt meter, , selector switch etc. inside the box including service connection within 50.00 mtr. length from l.t line with roof for rain water protection and 4 ( four ) nos. stand by r.c.c work in all respectas perdirection of the engineer in charge. 41 excavating trenches of required width for pipes, cables etc. in / c excavation for sockets and dressing of sides, where requiredramming of bottom, depth up to 1500 mm ( slope 1 in 200 ) in / c getting out the excavated soil andbackfilling of soil as required after laying of pipe line, in layer not exceeding 200mm in depth in / c consolidating each deposited layer by ramming, watering etc. and disposingof surplus excavated soil as directed with all required lead as per chapter 2 of cpwd specification & direction of theengineer in charge. 42 a ) .for upvcpipes in new worka ) . in all kinds of soil i ) for pipes not exceeding 90 mm dia 43 a ) .for upvcpipes in new worka ) . in all kinds of soili ) . for pipes exceeding 90mm dia but not exceeding 300mm dia. 44 b ) .for gi / ci / di pipes in new worka ) . in all kinds of soili ) . for pipes exceeding 90mm dia but not exceeding 300mm dia. 45 charges for cutting d.i. pipe with steel saw by manual means as per cpwd specification nd direction of the engineer in charge. i ) .150mm dia 46 providing and fixing c.i. sluice valves ( with cap ) complete with bolts, nuts, rubber insertions etc. ( the tail pieces if required will be paid separately ) as per cpwd specification and direction of the engineer in charge. 47 i.150mm dia. ( pn 1.6 ) 48 ii.100mm dia. ( pn 1.6 ) 49 iii.80mm dia. ( pn 1.6 ) 50 providing and fixing di specials as percpwd specification and direction of the engineer in charge. 51 a ) di all socketted bend 900 iii ) 150 mm dia 52 b ) di all socketted bend 450 iii ) 150 mm dia 53 c ) di all socketted bend 22.5 degree i ) .150mm dia 54 d ) di all socketted teevi ) 150 x 150 x 150 mm dia 55 e ) di collar fiange socketted ( i ) .150mm dia 56 f ) di flanged socketted tail piece ( i ) .100mm dia 57 iii ) 80 mm dia 58 iv ) 150mm dia 59 g ) di flanged spigotted tail piece ( i ) .100mm dia 60 ii ) .80mm dia 61 iii ) .150 mm dia 62 providing and laying s & s centrifugally cast ( spun ) ductile iron class k 7 pipes conforming to is : 8329 as per cpwd specification and direction of the engineer in charge.i. 150 mm dia di class k 7 pipes. 63 charges for push on ( tyton ) joints to centrifugually ( spun ) cast iron pipes or ductile iron pipes including testing of joints and includingthe cost of rubber gasket as per cpwd specification and direction of the engineer in chargea ) 150mm dia. 64 providing, fixing and laying fabricated upvc end cap conforming to is : 10124 ( part 4 ) with solvent cement conforming to is : 14182 including testing of joints complete as per cpwd specification and direction of the engineer in charge. i. 90 mm dia 65 ii. 110 mm dia 66 iii. 140 mm dia 67 providing, fixing and laying fabricated upvc bend of required degree conforming to is : 10124 ( part 8 / 9 / 10 / 11 / 12 / 13 ) with solvent cement conforming to is : 14182 including testing of joints complete as per chapter 20 of cpwd specification and direction of the engineer in charge. ( i ) .90mm dia 68 ii. 110 mm dia 69 iii. 140 mm dia 70 providing, fixing and laying fabricated upvc equal tee conforming to is : 10124 ( part 5 ) with solvent cement conforming to is :14182 including testing of joints complete as pe cpwd specification and direction of the engineer in charge.i. 90 x 90 mm dia 71 ii. 110 x 110 mm dia 72 iii. 140 x 140 mm dia 73 providing, fixing and laying fabricated upvc straight reducer conforming to is : 10124 ( part 3 ) with solvent cement conforming to is : 14182 including testing of joints complete as percpwd specification and direction of the engineer in charge.i. 110 x 90 mm dia 74 ii. 140 x 110 mm dia 75 iii. 140 x 90 mm dia 76 providing, fixing and laying flanged fabricated upvc tailpiece with ms flange ( 8 mm thick ) conforming to is : 10124 ( part 6 ) with solvent cement conforming to is : 14182 including testing of joints complete as per cpwd specification and direction of the engineer in charge. ( i ) .90mm dia 77 ii. 110 mm dia 78 iii. 140 mm dia 79 making road crossing by horizontal boring for smooth laying of upvc / ci / di / gi pipes etc. of required dia complete as per specification and the direction of the engineer in charge.b. by manual means. 80 providing and fixing g.i. pipes medium class as per is : 1239 with latest amendment complete with g.i. fittings including trenching and refilling, cutting and making good the walls etc. complete as percpwd specification and direction of the engineer in charge. a ) external works .i. 15 mm dia. nominal bore 81 ii. 40 mm dia. nominal bore 82 iii. 50 mm dia. nominal bore 83 providing, fixing and laying rigid upvc pipes conforming to is :4985 jointing with couplers, of same class conforming to is : 10124 ( pt ii ) with solvent cement conforming to is : 14182 including testing of joints complete ( but excluding the cost of specials like bend, tees etc. which will be paid separately ) as per cpwd specification and direction of the engineer in charge. a. class 3 ( working pressure 6.0 kg / cm2 ) 84 i. 40 mm od 85 ii. 50 mm od 86 iii. 90 mm dia. 87 iv. 110 mm dia 88 ii. 140 mm od 89 providing and laying of flexible pvc pipe ( conforming to is:7634 ) complete as per specification and direction of the engineer in charge ( cost of earth work and fittings will be paid separately ) . i. 15 mm dia. 90 providing and fitting fixing of 6 feet x 4 feet x 1 inch ( thickness ) gamair wood pannel board for fitting fixing of electrical items, in / c 2 nos ms angle post ( size 2 inch x 2 inch x 9 feet ) , nuts & bolts etc. for irrection of the same by 1:1.5:3 cement concrete casting ( 1 feet x 1 feet x 2 feet ) below the ground level and painting two or more coats & plastic paint as per specification and direction of the engineer in charge. 91 providing and fitting fixing ofpressure meter ( 0.0 14.0 kg / sqcm. ) as per relevant is specification and the direction of the engineer in charge. 92 providing earthing with perforated 40 mm dia g.i. pipe ( medium class ) ( 12 mm dia perforation ) , laying of 4 mm dia gi wire from earth electrode to panel, including excavating hole of 600 mm dia and refilling with salt and charcoal / coke in alternate layers of 300 mm , as per standard specification and direction of the engineer in charge.i. for 3 phase connection with 4.00 mtr. long g.i. pipe. 93 prividing & fitting fixing of 5000 gph x 76.00 mtr head water lubricated submersible pump of maximum 150 mm outer dia. with maximum 10 ( ten ) stages coupled with required wet and non over loading submersible motor suitable for 340 440 volts, 3 phase, 50hz , ac supply and star delta method of starting along with 70.00 mtr. pvc insulated 3 core flat copper cable of 4.0 sqmm conformingto relevant is code for submersible motor with all necessary equipments and fittings as required with suction case, strainer coupling key, vertical non return valve cum discharge case as per direction of rngineer in charge. ( duke / kirloskar / calama make ) 94 providing and fitting, fixingsteel sheet enclosed switchfuse units ( suitable for din fuse ) triple pole with neutral link ( tpn ) , 415 / 500 volt, l & t / havell’s / bch make etc. complete as per specification and direction of the engineer in charge.i.100 amps 95 providing and fitting, fixing of fully automatic star delta type motor starter ( 3 ph 50 hz, 415v, ) in steel sheet enclosures with contractors and timer etc. complete suitable for submersible pump l & t, bch , abb make as per specification and direction of the engineer in charge. i.35 hp / 26 kw relay range within 20 32 + 10%. 96 providing & fabrication of column pipe including fitting fixing of g.i. flange by cutting the gi pipe ( conforming to is : 1239 medium class ) into 3.05 mtr long and welding the same with gi flange as per specification anddirection of the engineer in charge ( g.i. pipe will be provided by the agency at his own cost &risk ) .i ) for100 mm dia g.i. pipe with 10 mm thick gi flange 97 providing and fitting fixing 3 phase indicating lamp fiited with panel board with three different colour lamps with battenholder complete as per specification and direction of theengineer in charge 98 providing and fitting fixing single phasing preventorselectable under voltage +selectable over voltage on delay 5 sec & off delay 15 sec phase asymmetry 10% l& t / bch / havels iemens etc. make complete as perspecification and direction of the engineer in charge. 99 providing and fitting fixing of moving iron type, range0 100 / 0 200 amps , 96mmx96mm size ac amps meter direct reading type ( l&t / ae make ) with selector switch and ct coil as a electrical instrument of the panel board as per specification and direction of the engineer in charge. 100 providing and fitting fixing of moving iron type, range 0 500 v, 96mmx96mm size ac volt meter ( l&t / ae make ) with selector switch as a electrical instrument of the panel board as per specification and direction of the engineer in charge. 101 providing and fitting fixing with pvc insulated single core multi strand copper cable conforming to is : 694 for inter connection with all electrical equipments of the pannel board as per specification and direction of the engineer in charge. i. 16 sqmm 102 providing and fixing c.i. non return valve of approved quality as per of cpwd specification and direction of the engineer in charge.i ) .100mm nominal bore. 103 providing & fitting fixing of g.i. flange ( 10 mm wall thickness ) by welding with g.i. / ms pipe and placing position as per specification and the direction of the engineer in charge. i. 100mm dia. 104 providing and fixing g.i. bend / elbow in the pipe line in / c testing of joints complete as per cpwd specification and direction the engineer in charge. i ) 15 mm dia 105 providing and fixing g.i. union as per cpwd specification and direction of the engineer in charge.i ) 15 mm dia 106 providing and fixing g.i. socket as per cpwd specification and direction of the engineer in charge. i ) 15 mm dia 107 providing and fitting fixing pvc / plastic bib cock conforming to is : 9763 in hydrant points at different locationas per specification & direction of the engineer in charge. ( i ) 15mm dia pvc / plastic bib cock 108 providing and fixing g.i. nipple of medium class as per cpwd specification and direction of the engineer in charge i ) 15 mm dia 150 mm long 109 providing and fitting fixingbrass ferrule with c.i cover conformingto is 2692 in / c boring and tapping the main as per cpwd specification and direction of the engineer in charge. i ) 10mm nominal bore....
30031473 tender for painting work of building, electrical work, tube well work, fitting of electrical cable....