Shri Saibaba Sansthan Trust - Maharashtra
40847474 supply and installation of furniture at sai baba educational campus, gat no183, nimgaon korhale, tal rahata, dist ahmednagar supply and installation of furniture at sai baba educational campus, gat no183, nimgaon korhale, tal rahata, dist ahmednagar for shri sai baba sansthan trust shirdi , furniture , providing and fixing file storage units 1200 ( w ) x 450 ( d ) x 1325 ( h ) with wooden doors providing, supplying and placing of storage unit.product size 2 doors ( lh and rh ) for 1200w for 600w and 1200w storage each door width 598w construction & material made from 0.6mm thick crca ( d grade, is 513 ) soft closing hinge handle asthetically appealing handle made of aluminum wooden doors with cam lock made of 18mm thick pre laminated twin board of e1 p2 grade and approved shade confirming tois 12823:1990 soft closing hinge. 3 way locking provision. click action mechanism. key removable in locked and unlocked positions. zinc alloy die cast housing. finish epoxy polyester powder coated to the thickness of 50 microns ( + / 10 micron ) . , providing and fixing file storage units ( size 1200 w x 450 d x 750 h ) providing, supplying and placing of storage unit.the wooden storage range comprises of a range of low height to medium height wooden sdu. body : body is made from 18mm plb with all the edges sealed with 0.8 mm thick pvc edgeband. the back panel is 9mm white plt. the entire construction is ready to assemble unit and is assembled with suitable kd fittings. the shelves and separator panels ( if available ) is made from 18 mm white plt and edges are sealed with 0.8 mm edge band. the bottom shelf is fixed and other shelves have one step adjustment for optimizing the space. doors : door panels ae made from 18 mm plb with 2 mm edge band on all edges ad a flush plastic handle is fitted vertically at the center of the door. the sdu runs in a pvc track mounted on the top and bottom panel of the body. sdu has a push type lock. all the storages are fitted with a 6 mm leveler at bottom for leveling. , chairs fixed t armrest, synchro 1, nylon base, nylon castor the cushioned seat assembly shall consists of moulded polyurethane foam upholstered with fabric. the foam is assembled over a 12mm thick hot pressed plywood . the back shall made up of two piece injection moulded frame. the inner frame shall be upholstered with mesh fabric and mounted on the main assembly. size of back shall be ( w ) 46 cm, ( h ) 55 cm & size of seat shall be ( w ) 48 cm x ( d ) 44.0cm. armrest has option of height adjustment . the arm top is made of soft moulded pu .the mechanism of chair shall have following features:360 degree revolving type, synchro mechanism, tilt tension adjustment, multi position tilt limiter with back safety return feature. the chair shall be provided with pneumatic height adjustment which shall have stroke of 95 + / 5 mm.the pedestal shall be made of nylon. it shall be fitted with 5 nos twin wheel castor. the size of the pedestal shall be 65.0 + / 1 cm pitch centre dia ( 70.0 + / 1.0 cm with castors ) . the twin wheel castors shall be injection moulded in pp . overall dimensions of chair shall be, width of chair 70.0cm, depth of chair 70.0 cm as measured from pedestal below. heightfrom ground min 95 to max 104 cm. seat height min 45.0cm to max 54.0cm.dimensions tolerance / variations shall be within + / 1 cm. chair tested as per ansi / bifma x5.1 standards , providing and fixing waiting bench ( iron, cushion 3 seater ) the seat and backrest is made out 1.2mm steel powder coated after anti rust withpvc or pu coated. pu foam of 40 mm thickness. size of back shall be ( w ) 48.0cm, ( h ) 34.5 cm & size of seat shall be ( w ) 46.0cm x ( d ) 49.0cm. the polyurethane foam for the seat and back shall beof density 55 + / 5 kg / m3. the powder coated leg frame assembly of chair shall bemade up of ms erw fitted with pp shoe ( is 1161 1998 ) .beam : 101.6x50.8x2mm thk rectangular tube, row connector : 25.4x25.4x1.6mm thk square tube, legs : 55.512x31.75x2mm thk elliptical tube. overall dimensions = centre to centre 48 cm, seat height 45.3 cm, overall height = 81.2 cm. option of abs tablet available. dimensions tolerance / variations shall be within + / 1 cm. , providing & fixing define plus high back pure leather upholstery / 2d dim. adj. armrest, synchro intuitive mechanism, aluminium base, pu castor, bifma compliant the seat shall be made up of 1.2 + / 0.1 cm thick hot pressed plywood & upholstered with pure leather upholstery and moulded polyurethane foam. the back shall be designed with contoured shape for extra comfort and made up of combination of 12mm ( 7 layers ) & 4mm ( 3 layers ) thick hot pressed plywood and 37mm thick, 32 density u foam. size of back shall be ( w ) 55.0cm, ( h ) 70.5 .0cm & size of seat shall be ( w ) 51.0cm x ( d ) 49.0cm. pu foam should be used in making seat which shall be moulded with density 55 + / 5 kg / m ³ and hardness load 15 20 kgf for 50% compression.the armrests should made of black integral skin polyurethane with 50 70 shore a hardness and reinforced with m.s insert. . the armrests shall be fitted to the seat with seat / armrest connecting strip assembly made of hr steel.the mechanism of chair shall have following features:360 degree revolving type, seat / back tilt ratio of 1:2, synchronized tilt, back tilt with 4 position locking and side tilt tension adjustment knob should be operated while taking back support for better adjustment of comfort. the chair shall be provided with pneumatic height adjustment which shall have stroke of 12 cm.the pedestal shall be made of die cast polished aluminium. it shall be fitted with 5 nos twin wheel castor. the size of the pedestal shall be 65.0 + / 0.5 cm pitch centre dia ( 70.0 + / 1.0 cm with castors ) . the twin wheel castors shall be injection moulded in black polypropylene. overall dimensions of chair shall be, width of chair 70.0cm, depth of chair 70.0 cm as measured from pedestal below. heightfrom ground min 115.5 to max 127.5 cm. seat height min 43.0cm to max 55 cm.dimensions tolerance / variations shall be within + / 1 cm.chair tested as per ansi / bifma x5.1 standards , providing woodchair the seat and back shall be made up of wood veneer with foam back. the chair can also be provided with fixed wooden armrests .the dimensions of back shall be 49 cm ( w ) x 37 cm ( h ) and of seat shall be 51 cm ( w ) x 50.0cm ( d ) . the seat and back inner shall be upholstered with pu foam and fabric and shall be assembled over the seat and back.the chair is made of rubber wood veneer with thickness of the leg 25 mm and width of the leg at 28mm. seat height 46 cm, height 83.0cm, width & depth of chair as measured from base width 60.0cm and depth 56.0 cm.dimensions tolerance / variations shall be within + / 1 cm. , metal storage with glass door 900w x 450d x 2015h glass door storwel shall have an overall size of916mm ( w ) x486mm ( d ) x1981mm ( h ) with welded construction. it should have shelf thickness of 0.7 mm, back thickness of 0.8mm, door thickness of 0.8mm ( high yield strength ) and all other components shall have a thickness of 0.9mm. these components shall be made of crca ‘d’ grade high yield strength as per is:513. the glass door storwel shall have a brass handle and a 2 way locking mechanism with shooting bolt .it should have a height wise adjustable shelf mounting which shall have a uniformly distributed load capacity of max 40 kg. it should also have a m10 screw type leveller with hex plastic base. the finishing shall include epoxy powder coated to the thickness of 50 microns ( + / 10 ) . plenty of colour options and shelving options shall be available. the storages is knock down are made up of crca having shelves. the storage has equally divided shelves. each storage door system has an indivial locking mechanism pre fitted to it. the top of the storage is made up of 0.8 mm thick crca duly powder coated to aproved finish. the caracass and shelf are made up of 0.8mm ( 18 gauge ) crca duly powder coated. the skirting is made up crca duly powder coated to the approved finish. the shelf comes with a stiffner with a thickness of 15mm duly tested for 40kg udl. the doors are made of 0.8mm thick crca with stiffeners for support. the powder coating is of 60 80 microns. , providing chair providing approved colour shell fiber , crome plated ms leg chair complte and approved by architect / clients: the single piece seat back shell is made up of injection moulded highimpact strength glass filled polypropylene polymer compound ( refer product catalogue for colour chart ) . shell size : 44.0 cm. ( w ) x 50.2 cm. ( d ) x 40.5 cm. ( h ) m.s. powder coated understructure option ( sm6 ) : the powdercoated ( dft 50±10 microns ) welded tubular frame is made from ø 2.22 ± 0.03 cm x 0.16 ± 0.0128 cm m.s. e.r.w tube. the 0.16 ± 0.008 cm thk crca sheet is welded to tubes for fixing shell to the frame. the shoe is made of high impact strength polypropylene polymer compound and are fitted at the end of the tubular frame. width ( w ) : 51.5 cm depth ( d ) : 52.5 cm height ( h ) : 81.8 cm seat height ( sh ) : 45.9 cm. , providing & fixing 8 seater dining table: top shall be of stainless steel brushed with plbinsert for durability . easy to maintain hygiene . the understructure shall be made of 50.8 mmx 50.8 mm 1.2 mm thick powder coatederw tubes at base which are welded and fixed to the top with screws .tubular stiffeners that are provided between the two vertical frames . the tubes shall be closed with plastic caps . level adjustment shall be provided to take care of unevenness in floor . , providing chair the seat and back shall be injection moulded in polypropylene. they shall be fitted on the understructure assembly and shall be fixed with screws. the chair shall be available in selected colours only. approximate back size shall be: 42.0cm. ( w ) x 38.5 cm. ( h ) . and approximate seat size shall be: 46 cm. ( w ) x 39.5 cm. ( d ) . the understructure assembly shall bemade of mserw pipe pipe:dia 19x1.6 and silver powder coated ( dft 40 60 microns ) . overall dimensions of chair shall be seat height 46.5 cm, height 83.0cm, width & depth of chair as measured from base width 42.0cm and depth 46 cm. dimensions tolerance / variations shall be within + / 1 cm. , stool for lab and class iv providing and fixing 4 legged lab stool, legs made of 16 guage 45 mm outer dimension ms pipe, duly painted, with a 304 grade stainless steel 12 inch wide seat with a 1 inch collar, height adjustment via a screw. as per design and drawing and instructions of engineer in charge. , providing chairs the seat and back shall be injection moulded in polypropylene. they shall be fitted on the understructure assembly and shall be fixed with screws. the chair shall be available in selected colours only. approximate back size shall be: 42.0cm. ( w ) x 38.5 cm. ( h ) . and approximate seat size shall be: 46 cm. ( w ) x 39.5 cm. ( d ) . the understructure assembly shall bemade of mserw pipe pipe:dia 19x1.6 and silver powder coated ( dft 40 60 microns ) . overall dimensions of chair shall be seat height 46.5 cm, height 83.0cm, width & depth of chair as measured from base width 42.0cm and depth 46 cm. dimensions tolerance / variations shall be within + / 1 cm. , providing and fixing semi fowlerbed is a simple bed ( 78 l x 36 w x 40 h ) designed for remote primary healthcare centres , where beds are expected to last for years without any maintenance. • with full sheet metal embossing • no maintenance. • durable & long lasting • sturdy & strong construction. • powder coated structure , mild steel locker : mild steel locker : providing, supplying and placing of storage unit.product size 2 doors ( lh and rh ) for 1200w for 600w and 1200w storage each door width 598w construction & material made from 0.6mm thick crca ( d grade, is 513 ) soft closing hinge handle asthetically appealing handle made of aluminum cam lock 3 way locking provision. click action mechanism. key removable in locked and unlocked positions. zinc alloy die cast housing. finish epoxy polyester powder coated to the thickness of 50 microns ( + / 10 micron ) . , providing and fixing corner table with ms understructure with toughened glass top, 600 x 600 x 450h 12mm thick toughened glass top with ms powder coated understructure ( 25x25 tube section ) . free from burrs & sharp edges etc. complete and approved by architect / clients. , providing & fixing 3 seater sofa. the seat , armrest & backrest assembly shall consists of a pine understructure with plywood frame consisting layers of foam with wadding. the complete assembly shall be covered with leatherette upholstery . the size of seat shall be: 131.0cm. ( w ) x 51.5cm. ( d ) x 43 cm. ( h ) approx.elastic webbing is used to give a soft contour to the seat . it consists of a fabricated inner frame hardboard assembly with layers of foam. the hardness of the p.u. foam= 16 20 kgs. on hampden m / c for 25% compression of the foam. the leg is made of wood and 4 tier packing is used to minimize damage & reduce wastage. overall dimensions of chair shall be seat width 131 cm, height 82 cm, total width 71 cm, total length 160 cm. dimensions tolerance / variations shall be within + / 1 cm etc. complete and approved by architect / , providing & fixing high back with moulded mesh back with lumbar support, hr foam seat with plano fabric, 1d adj. armrest, nylon base & pu castor voc certified chair ansi / bifma x7.1 2007 & ansi / bifma m7.1 2011.the cushioned seat assembly shall consists of moulded polyurethane foam upholstered with fabric. the foam is assembled over a 12mm thick hot pressed plywood . the back shall made up of two piece injection moulded frame. the inner frame shall be upholstered with mesh fabric and mounted on the main assembly. size of back shall be ( w ) 48.5cm, ( h ) 49.5 cm & size of seat shall be ( w ) 49 cm x ( d ) 44.0 cm .armrest has 2 way button operated height adjustment and depth adjustment. the arm top is made of soft moulded pu with ms insert.the mechanism of chair shall have following features:360 degree revolving type, synchro mechanism, tilt tension adjustment, multi position tilt limiter with back safety return feature. head rest assembly shall made up of polyurethane foam upholstered with fabric. the head rest assembly is mounted on the top of back. it has 5 point adjustment of upto 8 cm . the chair shall be provided with pneumatic height adjustment which shall have stroke of 112 mm.the pedestal shall be made of die cast polished aluminium or nylon. it shall be fitted with 5 nos twin wheel castor. the size of the pedestal shall be 65.0 + / 1 cm pitch centre dia ( 70.0 + / 1.0 cm with castors ) . the twin wheel castors shall be injection moulded in black nylon or pu . overall dimensions of chair shall be, width of chair 70 cm, depth of chair 70.0 cm as measured from pedestal below. heightfrom ground min 96.5 to max 108.0 cm. seat height min 47 cm to max 58.5 cm.dimensions tolerance / variations shall be within + / 1 cm. chair tested as per ansi / bifma x5.1 standards etc. complete and approved by architect / clients. , providing & fixing chair h.r. foam back & foam seat with plano fabric the seatand back shall be made up of 1.2+ / 0.1cm thick hot pressed plywood and upholstered with fabric / leatherette and moulded polyurethane foam all around. the moulded polyurethane foam shall be ofdensity 55+ / 5 kg / m ³, and hardness load 15 20 kgf as per is:7888 for 25% compression.the dimensions of seat shall be 49.0cm ( w ) x 44.0cm ( d ) and of back shall be 50.0cm ( w ) x 47 cm ( h ) .the armrests should be integrated with the understructure. the cantilever understructure made up of dia 25.4mm, 2mm thk erw tube and finished with black powder coat. overall dimensions of chair shall be, width of chair 55cm, depth of chair 55 cm as measured from base below. height92 cm. seat height 45 cm.dimensions tolerance / variations shall be within + / 1 cm. chair tested as per ansi / bifma x5.1 standards etc. complete and approved by architect / clients. , centre table with ms understructure with toughened glass top, 1200 x 750 x 450h 12mm thick toughened glass top with ms powder coated understructure ( 25x25 tube section ) . free from burrs & sharp edges , providing & fixing sofa chair the seat , armrest & backrest assembly shall consists of a pine understructure with plywood frame consisting layers of foam with wadding. the complete assembly shall be covered with leatherette upholstery . the size of seat shall be: 53cm. ( w ) x 51.5cm. ( d ) x 43 cm. ( h ) approx. elastic webbing is used to give a soft contour to the seat . it consists of a fabricated inner frame hardboard assembly with layers of foam. the hardness of the p.u. foam= 16 20 kgs. on hampden m / c for 25% compression of the foam. the leg is made of wood and 4 tier packing is used to minimize damage & reduce wastage. overall dimensions of chair shall be seat width 53 cm, height 82 cm, total width 71 cm, total length 82 cm. dimensions tolerance / variations shall be within + / 1 cm. , providing & fixing dressing table: 2400 ( w ) x 600 ( d ) x 1800 ( h ) the dressing table unit is made up of 18mm thick plyboard with both side decorative laminate. all exposed edges are sealed with 2mm thick pvc edge banding. the unit has one drawer and one shelf. the dressing table has a mirror of 4mm thick pasted on 18mm thick ply board attached to the base unit. the mirror size considered is 2000l x 1050h x 4 ( t ) . the mirror has been pasted using high quality 3m sticker etc. complete as per detail drawings and approved by architect / clients. , providing & fixing wardrobe: 1200 ( w ) x 600 ( d ) x 2100h ) . the wardrobe side panels and doors are made up of 18mm thick ply with as per approved laminate sahde . side decorative laminate. all exposed edges are sealed with 2mm thick pvc edge banding. the shelves are made of 18mm thick plywith decorative laminate on bothsides.thetopismadeof18mmplywithdecorativelaminateonbothsides.the exposed edges of the top are sealed with 2mm thick pvc edge banding. the top most part of the wardrobe has an aluminum hanger rod of ebco make. one drawer of size 400 ( w ) x 150 ( h ) x 450 ( d ) made of 18mm thick ply board as per approved shade . the drawer will have a multipurpose lock of ebco premium make. the wardrobe handles are satin ss finish of 160mm pitch. the wardrobe has a multipurpose lock of ebco make. all hinges considered are hettich make. necessary good quality hardwares have been considered as required. hostel wardrobe mirror: 1060 ( h ) x 288 ( w ) x 4 ( t ) the wardrobe has a mirror of 4mm thick pasted on the left side door using high quality 3m sticker etc. complete as per detail drawings and approved by architect / clients. , providing & fixing open cabinate units2400x1200htx 600d top panel: 17mm thick bwr ply with laminate as per approved shade with pvc edge banding. door shutters:na side panels: 17mm thick bwr ply with laminate as per approved shadewith pvc edge banding. back panels: 9 mm thickbwr ply with balancing laminatewith pvc edge banding. shelf panels: 17 mm thickbwr plywith pvc edge banding. hardware: high quality components for fitting the panels, provision for adjustability of the shelf panel inside the storage with pin support.pvc edge banding is done by machine pressed with hot melt glue etc. complete as per drawings and approved by architect / clients. , hostel bed single : 1000 ( w ) x 650 ( h ) x 2025 ( l ) for mattress size of 915 ( w ) x 1981 ( l ) understructure: the legs are made of square tube of size 25 x 25mm made out of ms with a thickness of 1.2mm. the legs should have corner brackets welded to it at two levels. the corner brackets are made of 2mm thick crca having a l shaped structure to join the side panels and headboard to the leg. three nos. of horizontal stiffeners are provided at equal intervals. the stiffeners are made of square tube of size 25 x 25mm made out of ms with a thickness of 1.2mm. the middle horizontal stiffener has a leg attached to it to transfer the load to the ground and add to the strength and stability of the complete structure. this leg is also made of square tube of size 25 x 25mm made out of ms with a thickness of 1.2mm. all metal components to undergo 7 tank treatment process and should be powder coated to the thickness of minimum 50 microns dft. side panel: the side panels are made up of 18mm thick prelam particle board with both side decorative laminate. all exposed edges are sealed with 2mm thick pvc edge banding. the overall width of the side panel is 150mm. the side panels have 18mm thick prelam particle board baton running for required length to add rigidity to the structure. head board : the head board is made up of 18mm thick prelam particle board with both side decorative laminate. all exposed edges are sealed with 2mm thick pvc edge banding. the head board size to be considered as 1000 x 650mm. foot board : the foot board is made up of 18mm thick prelam particle board with both side decorative laminate. all exposed edges are sealed with 2mm thick pvc edge banding. the head board size to be considered as 1000 x 450mm. bed base: the bed base is made up of 12mm thick prelam particle board with both side white laminate etc. complete as per drawings and approved by architect / clients. , providing & fixing hostel study table: 1200 ( w ) x 600 ( d ) x 740 ( h ) the table top and gable end are made of 25mm thick ply as per approved lamiante shade . all exposed edges are sealed with 2mm thick pvc edge banding. the modesty panel ismade of 18mm ply as per approved lamiante shadewith matching pvc edge banding. one storage unit of size 400 ( w ) x 450 ( d ) x 715 ( h ) has been considered. all side panels, shelves and drawer facia are made of 18mm thick ply as per approved lamiante shade with matching pvc edge banding. the drawer will have a multipurpose lock of ebco premium make etc. complete as per drawings and approved by architect / clients. , providing & fixingbed @ 2100lx 1650dx 650h providing and fixing bed of size 2100lx1650dx650h with matress and pillow. understructure: the legs are made of square tube of size 25 x 25mm made out of ms with a thickness of 1.2 mm. the legs should have corner brackets welded to it at two levels. the corner brackets are made of 2mm thick crca having a l shaped structure to join the side panels and headboard to the leg. three nos. of horizontal stiffeners are provided at equal intervals. the stiffeners are made of square tube of size 25 x 25mm made out of ms with a thickness of 1.2mm. the middle horizontal stiffener has a leg attached to it to transfer the load to the ground and add to the strength and stability of the complete structure. this leg is also made of square tube of size 25 x 25mm made out of ms with a thickness of 1.2mm. all metal components to undergo 7 tank treatment process and should be powder coated to the thickness of minimum 50 microns dft.side panel: the side panels are made up of 18mm thick ply board with both side approved shed & colour laminate. all exposed edges are sealed with 2mm thick pvc edge banding. the overall width of the side panel is 150mm. the side panels have 18mm thick ply boardbaton running for required length to add rigidity to the structure. head board : the head board is made up of 18mm thick ply board with both side approved shed & colour laminate. all exposed edges are sealed with 2mm thick pvc edge banding. the head board size to be considered as 1650 x 650mm. foot board : the foot board is made up of 18mm thick ply board with both side approved shed & colour laminate. all exposed edges are sealed with 2mm thick pvc edge banding. the head board size to be considered as 1650 x 450mm. bed base: the bed base is made up of 12mm thick ply board with both side approved shed & colour laminate etc. complete as per detail drawings and approved by architect / clients. , providing & fixing bed side table @ 400lx 400dx 415h providing and fixing bed side table of size 400lx 400dx 415h the bed side unit is made up of 18mm thick ply with both side approved shed laminate. all exposed edges are sealed with 2mm thick pvc edge banding. the bed side table has one drawer and one shelf. the shelf is made of 18mm thick ply with both side approved shed laminate. all exposed edges are sealed with 2mm thick pvc edge , providing & fixing tea table @ 1200lx 750dx 450h providing and fixing of tea table 1200mm x 750mm x 450mm with 12mm thick colour eitched tempered glass with bevelled drawing made out of 18mm thick waterproofing ply. the outer laces to be finished with high quality 4 mm thik veneer or 1 mm thik micaetc. complete as per drawings and approved by architect / clients. , benches , bear shape bench: size 1200x1200x380 600mm : providing & fixing bear shape 25mm thick mdf board with edge banding tape with adjestable stainless steel legs non toxic modularbenches with six chair tec. completed as per detail drawing , designing and approved by engineer in charge, architect / clinet. , hexagoneshape bench: size 1200x1200x380 600mm : providing & fixing butterfly shape25mm thick mdf board with edge banding tape with adjestable stainless steel legs non toxic modularbenches with six chair tec. completed as per detail drawing , designing and approved by engineer in charge, architect / clinet. , moonshape bench: size 1200x1200x380 600mm : providing & fixing frog shape shape 25mm prelaminated mdf board with edge banding tape with adjestable stainless steel legs non toxic modularbenches with six chair tec. completed as per detail drawing , designing and approved by engineer in charge, architect / clinet. , providing & fixing dual desk size 840mm w x 990mm d x 537mm h all panels are made from 18mm thk pre laminated twin board ( e1 / p2 desk top grade ) with pvc edge banding on all sides.the panels have corners panel rounded for safety usage. all side metal frames and cross connectors are made from combination of 25.4 x1.2 mm thk ( approx. 18 swg ) round erw tubes , 31.8 x 1.2 mm thk ( approx. 18 swg ) round erw tubes and 28.6 x 1.2 mm thk ( approx. 18 swg ) round erw tubes ( as per is:7138 ) which are welded together. the welded structures and cross connectors are coated with min. 45 micron thickness of epoxy polyester coating. back supports which are provided at the rear back are made of 50.8 x 25.4x 1.2mm thk ( approx. 18 swg ) rectangular erw tubes ( as per 1s:7138 ) .the tubes are coated with min. 45 micron thickness of epoxy polyester coating. the storage shelves are made from 0.6 mm thk ms sheet ( as per 1s:513 ) fixed below the desk top panel and are coated with min. 45 micron thickness of epoxy polyester coating. hooks are provided on the vertical side frames on both sides of the desk for hanging bags / bottles. they are made from 2 mm thk ms sheet ( as per 1s:513 ) and are coated with min. 45 micron thickness of epoxy polyester coating. the understructure is assembled using m6 trilobular screws ( as per din 7500 ) with zn blue plating ( as per is 1573:1986 ) . compact laminate seat and back panels are assembled using m6 countersunk trilobular screws ( as per din 7500 ) with zn black plating ( as per is 1573:1986 ) . spacers are provided on the top of round tubes for wooden panels fixing. they are made of pp glass filled ( 30% ) . understructure plastic caps made of pp copolymer ( 3530 grade ) are also provided on the rear frames adding more aestheic value to the product. m6 high tensile tvs make bolt ( class 8.8 ) with glasss filled nylon level adjustors are provided at the bottom of understructure to take care of unevenness in floor with height adjustment of approx 15mm. certification green guard ( ul ) certified productas per drawing, approval and instructions of the architect / client. sample mock shall be approved from architect / client. , providing & fixing dual desk size 1040x1060x647 all panels are made from 18mm thk pre laminated twin board ( e1 / p2 desk top grade ) with pvc edge banding on all sides.the panels have corners panel rounded for safety usage. all side metal frames and cross connectors are made from combination of 25.4 x1.2 mm thk ( approx. 18 swg ) round erw tubes , 31.8 x 1.2 mm thk ( approx. 18 swg ) round erw tubes and 28.6 x 1.2 mm thk ( approx. 18 swg ) round erw tubes ( as per is:7138 ) which are welded together. the welded structures and cross connectors are coated with min. 45 micron thickness of epoxy polyester coating. back supports which are provided at the rear back are made of 50.8 x 25.4x 1.2mm thk ( approx. 18 swg ) rectangular erw tubes ( as per 1s:7138 ) .the tubes are coated with min. 45 micron thickness of epoxy polyester coating. the storage shelves are made from 0.6 mm thk ms sheet ( as per 1s:513 ) fixed below the desk top panel and are coated with min. 45 micron thickness of epoxy polyester coating. hooks are provided on the vertical side frames on both sides of the desk for hanging bags / bottles. they are made from 2 mm thk ms sheet ( as per 1s:513 ) and are coated with min. 45 micron thickness of epoxy polyester coating. the understructure is assembled using m6 trilobular screws ( as per din 7500 ) with zn blue plating ( as per is 1573:1986 ) . compact laminate seat and back panels are assembled using m6 countersunk trilobular screws ( as per din 7500 ) with zn black plating ( as per is 1573:1986 ) . spacers are provided on the top of round tubes for wooden panels fixing. they are made of pp glass filled ( 30% ) . understructureplastic caps made of pp copolymer ( 3530 grade ) are also provided on the rear frames adding more aestheic value to the product. m6 high tensile tvs make bolt ( class 8.8 ) with glasss filled nylon level adjustors are provided at the bottom of understructure to take care of unevenness in floor with height adjustment of approx 15mm. etc. complete as per drawing, approval and instructions of the architect / client. sample mock shall be approved from architect / client. , dual desk ize 1240mm w x 1130mm d x 757mm h all panels are made from 18mm thk pre laminated twin board ( e1 / p2 desk top grade ) with pvc edge banding on all sides.the panels have corners panel rounded for safety usage. all side metal frames and cross connectors are made from combination of 25.4 x1.2 mm thk ( approx. 18 swg ) round erw tubes , 31.8 x 1.2 mm thk ( approx. 18 swg ) round erw tubes and 28.6 x 1.2 mm thk ( approx. 18 swg ) round erw tubes ( as per is:7138 ) which are welded together. the welded structures and cross connectors are coated with min. 45 micron thickness of epoxy polyester coating. back supports which are provided at the rear back are made of 50.8 x 25.4x 1.2mm thk ( approx. 18 swg ) rectangular erw tubes ( as per 1s:7138 ) .the tubes are coated with min. 45 micron thickness of epoxy polyester coating. the storage shelves are made from 0.6 mm thk ms sheet ( as per 1s:513 ) fixed below the desk top panel and are coated with min. 45 micron thickness of epoxy polyester coating. hooks are provided on the vertical side frames on both sides of the desk for hanging bags / bottles. they are made from 2 mm thk ms sheet ( as per 1s:513 ) and are coated with min. 45 micron thickness of epoxy polyester coating. the understructure is assembled using m6 trilobular screws ( as per din 7500 ) with zn blue plating ( as per is 1573:1986 ) . compact laminate seat and back panels are assembled using m6 countersunk trilobular screws ( as per din 7500 ) with zn black plating ( as per is 1573:1986 ) . spacers are provided on the top of round tubes for wooden panels fixing. they are made of pp glass filled ( 30% ) . understructure plastic caps made of pp copolymer ( 3530 grade ) are also provided on the rear frames adding more aestheic value to the product. m6 high tensile tvs make bolt ( class 8.8 ) with glasss filled nylon level adjustors are provided at the bottom of understructure to take care of unevenness in floor with height adjustment of approx 15mm, etc. complete as per drawing, approval and instructions of the architect / client. sample mock shall be approved from architect / client....